Name: 7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016
Start: 2016-09-12T08:00:00+02:00
End: 2016-09-14T18:40:00+02:00
Location: No location set

7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016

from Monday, 12 September 2016 (08:00) to Wednesday, 14 September 2016 (18:40)

Monday, 12 September 2016

08:00 Registration

08:00 - 09:00

09:00 Tour 1-3: Plant Visits: Plant Visits
Plant Visits
09:00 - 12:00

Tour 4: Linz Blue Danube Tour

09:00 - 10:00

12:00 Lunch
Lunch
12:00 - 13:00

13:00 Opening

13:00 - 13:20

13:20 Plenary Lecture ‐ Prof. Schleicher

13:20 - 14:00
Room: Room A
14:00 Keynote - Prof. Schmoele: THE BLAST FURNACE - FIT FOR THE FUTURE?
THE BLAST FURNACE - FIT FOR THE FUTURE?
14:00 - 14:30
Room: Room A
Contributions

14:00 THE BLAST FURNACE - FIT FOR THE FUTURE? - PETER SCHMÖLE (ThyssenKrupp Steel Europe)
14:30 Coffee Break
Coffee Break
14:30 - 15:00
15:00 Blast Furnace, Operation and Control
15:00 - 17:20
Room: Room A
Contributions

15:00 ENHANCING THE PRODUCTIVITY OF LARGE BLAST FURNACES AT HIGH SLAG RATES - NAVEEN Singh (JSW steel Ltd)

15:20 BLAST FURNACE OPERATION IN ROUGH TIMES - ROB VAN OPBERGEN (Danieli Corus BV)

15:40 EFFECT OF SMALL COKE RATE ON CONSUMPTION BEHAVIOR OF SMALL COKE IN BLAST FURNACE - YUSUKE KASHIHARA (JFE Steel Corporation)

16:00 CHARACTERISATION OF FRACTURE MECHANISMS IN A BLAST FURNACE COKE - HANNAH LOMAS (University of Newcastle)

16:20 MODULAR UPGRADES FOR EXISTING BLAST FURNACE AUTOMATION SYSTEMS - PETER WARREN (Danieli Corus BV)

16:40 CHARGING PRACTICE OF BLAST FURNACE OPERATED WITH 100% ACID PELLETS - IGOR SHEPETOVSKY (KOSAYA GORA IRON WORKS)

17:00 INNOVATIVE TOOLS FOR PROCESS OPTIMIZATION – BURDEN SURFACE SCANNING VIA BEAMFORMING RADAR AND MEASUREMENT OF THE TOP GAS TEMPERATURE DISTRIBUTION - CHRISTOPH FEILMAYR (voestalpine Stahl GmbH)
Ironmaking Fundamentals
15:00 - 17:20
Room: Room C
Contributions

15:00 MINERAL4/RECOGNITION4: A UNIVERSAL OPTICAL IMAGE ANALYSIS PACKAGE FOR IRON ORE, SINTER AND COKE CHARACTERIZATION - EUGENE DONSKOI (CSIRO Mineral Resources)

15:20 A STUDY ON THE METALLIZING SINTERING OF PELLETS OF IN-PLANT IRON-BEARING DUST AND MUD - DEQING ZHU (School of Mineral processing and Bioengineering, Central South University)

15:40 ADSORPTION CHARACTER OF SINTER ORE ON POTASSIUM VAPOR - ZHIWU YAN (University of Science and Technology Beijing)

16:00 A STUDY OF THE GASEOUS REDUCTION OF MAGNETITE ORE IN A FIXED-BED REACTOR AND USING IN-SITU HIGH-TEMPER - YURY KAPELYUSHIN (The University of New South Wales)

16:20 EXPERIMENTAL SIMULATION OF THE INTERACTION OF SLAG AND HOT METAL WITH COKE AT THE BOSH REGION OF BLAST FURNACE - ANRIN BHATTACHARYYA (Montanuniversitaet Leoben)

16:40 QUANTIFICATION OF SINTER MINERAL PHASES WITH IMAGE PROCESSING - HEINRICH MALI (Montanuniversität Leoben)

17:00 ANALYSIS OF THE ALKALI DISTRIBUTION IN IRONMAKING REACTORS BY THERMOCHEMICAL MODELLING - ANTON PICHLER (voestalpine Stahl GmbH)
Sintering, Operation and Control
15:00 - 16:00
Room: Room B
Contributions

15:00 COMBINED INJECTION TECHNOLOGY OF GAS FUEL AND OXYGEN IN IRON ORE SINTERING PROCESS - TOSHIYUKI HIROSAWA (JFE Steel Corporation)

15:20 AUTOMATIC SAMPLING AND ANALYSIS OF GRANULATED SINTER FEED - JOHANN REIDETSCHLAEGER (PRIMETALS Technology GmbH)

15:40 RECENT ADVANCES IN UNDERSTANDING SINTERING EMISSIONS AND THEIR MITIGATION TECHNOLOGIES - LIMING LU (CISRO MINERAL RESOURCES)
16:00 Recyling of In-Plant Residues
16:00 - 16:40
Room: Room B
Contributions

16:00 CHARACTERISATION OF STEELPLANT BY-PRODUCTS TO REALISE THE VALUE OF FE AND ZN - RAYMOND J. LONGBOTTOM (University of Wollongong)

16:20 FLOW SHEET MODELLING OF STEEL MAKING ROUTES IN A PROCESS INTEGRATION PLATFORM - BERND WEISS (Primetals Technologies GmbH)
17:20 Welcome Drink & Postersession
17:20 - 20:00
Contributions

17:30 PHYSICAL MODELLING BASED ANALYSIS OF DRY SLAG GRANULATION - PRASAD KALI (Indian Institute of Technology, Madras)

17:40 ANALYSIS OF NONSTATIONARY TRANSIENT PROCESSES IN BLAST FURNACE - NIKOLAY SPIRIN (Ural Federal University)

17:50 KINETIC ANALYSIS AND EFFECT OF BIOMASS ASH ON COMBUSTION CHARACTERISTIC OF PULVERIZED COAL - LIU SIYUAN (University of Science and Technology Beijing)

18:00 RESEARCH AND APPLICATION OF SINTERING HIGH-TEMPERATURE CHARACTERISTICS OF IRON ORE - BO SU (The University of Science and Technology Beijing (USTB))

18:10 EFFECTS OF MGO ON THE SINTERING LIQUID, THE PROPERTIES AND MINERALOGICAL MORPHOLOGY OF THE HIGH-BASICITY SINTER - LIU DONGHUI (School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing)

18:20 THE INFLUENCE OF ZINC VAPOR ON COMPOSITION AND PROPERTIES OF COKE - JIANBO ZHONG (School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing)

18:40 STUDY THE INFLUENCE MECHANISM OF POTASSIUM VAPOUR ON SINTER REDUCTION - ZHIWU YAN (University of Science and Technology Beijing)

18:50 CHARACTERISTICS OF LITHIUM SILICATE PREPARED BY SOLID STATE REACTION AND THERMOGRAVIMETRIC ANALYSIS - HAIYANG WANG (School of Metallurgical and Ecological Engineering)

19:00 STUDY ON THE MECHANISM OF CEO2 AS COMBUSTION IMPROVER IN PCI - SONG LIU (North China University of Science and Technology)
20:00 Tour 5: Linz Pub Tour: Meet the locals
Meet the locals
20:00 - 23:45
Tuesday, 13 September 2016
08:30 CO2 Reduction and Energy Saving
08:30 - 10:10
Room: Room B
Contributions

08:30 DRY BLAST FURNACE SLAG GRANULATION WITH WASTE HEAT RECOVERY - THOMAS FENZL (Primetals Technologies, Austria GmbH)

08:50 EFFICIENT SINTER COOLING WITH OPTIMIZED ENERGY RECOVERY, ENERGY SAVING AND EMISSION REDUCTION - MICHAELA BOEBERL (Primetals Technologies Austria GmbH)

09:10 LOW CO2 IRONMAKING IN THE BLAST FURNACE - ADELINE MORCEL (Swerea MEFOS AB)

09:30 DIRECT REDUCTION TECHNOLOGY AS A FLEXIBLE TOOL TO REDUCE THE CO2 INTENSITY OF IRON AND STEELMAKING - THOMAS BUERGLER (voestalpine Stahl GmbH)

09:50 COMPARING THE CO2 EMISSIONS OF DIFFERENT IRONMAKING ROUTES - BARBARA RAMMER (Primetals Technologies Austria GmbH)
Ironmaking Fundamentals
08:30 - 10:10
Room: Room C
Contributions

08:30 DISINTEGRATION MECHANISM OF CALCIUM FERRITE IN SINTER BY REDUCTION - TAICHI MURAKAMI (Tohoku University)

08:50 EFFECT OF COKES GASIFICATION WITH CO2 AND H2O ON THE POROSITY AND STREHGNTH IN 1100-1500°C - SOON-MO SHIN (GIFT/POSTECH)

09:10 DEVELOPMENT OF SLAG FLUIDITY PREDICTION SYSTEM AND ITS APPLICATION FOR BLAST FURNACE - SHIAU JIA-SHYAN (China Steel Corporation)

09:30 A MECHANISTIC MODEL OF THE SAPOZHNIKOV PLASTOMETER - DAVID R. JENKINS (CSIRO)

09:50 FORMATION OF IRON-ORE SINTER MINERALOGY AND MICROSTRUCTURE: TOWARDS A COMPREHENSIVE CONCEPTUAL MODEL OF THE FLAME FRONT - JAMES SMALL (Tata Steel)
Blast Furnace, Design and Equipment
08:30 - 10:10
Room: Room A
Contributions

08:30 LATEST DEVELOPMENT IN DRY AND WET BLAST FURNACE GAS CLEANING TECHNOLOGY - PETER KLUT (Danieli Corus BV)

08:50 INSTALLATION, COMMISSIONING AND RAMP-UP OF THE NEW PULVERIZED COAL INJECTION SYSTEM AT ARCELORMITTAL KRYVYI RIH BLAST FURNACE NO. 9 - REINOUD VAN LAAR (Danieli Corus BV)

09:10 NEW BLAST FURNACE OPERATION PROSPECTS WITH THE G3 CHUTE TRANSMISSION GEARBOX - PAUL TOCKERT (PAUL WURTH S.A.)

09:30 BLAST FURNACE RELINE IMPLEMENTATION STRATEGY - JOHN HYDE (Hatch Ltd.)

09:50 ILTEC - METTOP´S REVOLUTIONARY COOLING SOLUTION FOR THE STEEL INDUSTRY - MARTINA HANEL (Mettop GmbH)
10:10 Coffee Break
Coffee Break
10:10 - 10:45
10:45 Blast Furnace Modelling
10:45 - 12:05
Room: Room A
Contributions

10:45 BLAST FURNACE HEARTH ASSESSMENT BY COMBINING AU-E AND THERMOCOUPLE DATA - HAMID Ghorbani (Hatch Ltd.)

11:05 PREDICTION OF BURDEN DISTRIBUTION OF BLAST FURNACE BY USING DEM - HIROSHI MIO (Nippon Steel & Sumitomo Metal Corp.)

11:25 IRON ORE PELLET REDUCTION BEHAVIOR IN POTENTIAL LOW CO2 BLAST FURNACE SCENARIOS - ANTTI KEMPPAINEN (Process Metallurgy Research Unit)

11:45 SINTER – NUT COKE INTERACTION AND BEHAVIOUR DURING CONVEYOR BELT TRANSPORTATION AND DISCHARGE: A DEM STUDY - DESIDE CHIBWE (University of Newcastle)
Blast Furnace, Operation and Control
10:45 - 12:05
Room: Room C
Contributions

10:45 THE HIGHS AND LOWS OF THE FOURTH CAMPAIGN OF REDCAR BLAST FURNACE, SSI UK, APRIL 2012 – SEPTEMBER 2015 - PETER WARREN (Materials Processing Institute)

11:05 IMPACT ON COMBUSTION CONDITIONS FROM TUYERE INJECTION SETTINGS - LENA S ÖKVIST (Swerea MEFOS AB)

11:25 IDEAL BLAST FURNACE PROCESS - DIMITRI Tikhonov (NLMK, Novolipetsk Steel, Lipetsk, Russia)

11:45 RESERVES FOR RAISING THE EFFICIENCY OF BLAST FURNACE PROCESS - IVAN KURUNOV (NLMK, Novolipetsk Steel, Lipetsk, Russia)
Pelletising
10:45 - 12:05
Room: Room B
Contributions

10:45 EFFECT OF FLUXING AGENTS ON THE QUALITY AND MICROSTRUCTURE OF HEMATITE PELLETS - SRINIVAS DWARAPUDI (R&D TATA STEEL JAMSHEDPUR INDIA)

11:05 INNOFREIGHT CONTAINER SYSTEMS - A NEW STANDARD IN RAILWAY TRANSPORT FOR VOESTALPINE - LUKAS ZENI (Innofreight Speditions GmbH)

11:25 SIMULATION BASED PELLET-PLANT DESIGN - MICHAEL FALLER (PRIMETALS Technology GmbH)

11:45 PELLETIZATION OF MALAYSIA MAGNETITE CONCENTRATES AND ITS PROPERTIES OF GAS-BASED DIRECT REDUCTION - JIAN PAN (Central South University)
12:05 Lunch
Lunch
12:05 - 13:30

13:30 Panel Discussion: Can low CO2 ironmaking become a reality in Europe?

13:30 - 14:15
14:30 Cokemaking, Operation and Control
14:30 - 15:50
Room: Room A
Contributions

14:30 PID COMBUSTION – DEDICATED CONTROL FOR AIR ADMISSION IN A HEAT RECOVERY COKE OVEN AT TKCSA - YAN SAMUEL FERREIRA JUNQUEIRA (Thyssenkrupp CSA, Brazil)

14:50 OBTAINING DETAILED MINERAL AND MINERAL/MACERAL ASSOCIATION INFORMATION IN COKE OVEN FEED COAL SAMPLES BY OPTICAL IMAGE ANALYSIS - PRIYANTHI HAPUGODA (CSIRO)

15:10 APPLICATION OF I600 FROM THE CSR TEST AS A MEASURE OF PILOT OVEN COKE STRENGTH - LUKAS KOVAL (CSIRO)

15:30 APPLICATION OF ORGANIC POLYMER IN COKE MAKING- TATA STEEL SCENARIO - DEBJANI NAG (Tata Steel)
Pelletising
14:30 - 15:50
Room: Room B
Contributions

14:30 APPLICATION OF THE HYBRID FLOTATION IN IRON ORE - PNEUMATIC FLOTATION FOR REMOVAL OF SULFUR - LUKAS PETZOLD (Primetals Technologies Austria GmbH) SVEN MENGER (Primetals Technologies Austria GmbH)

14:50 EFFECT OF IRON ORE CHARACTERISTICS ON THE WATER –IRON ORE INTERACTION - LIMING LU (CSIRO Mineral Resources)

15:10 THE OXIDIZING PELLETIZATION OF MANGANESE ORE FINES AND ITS CONSOLIDATION MECHANISM - DEQING ZHU (School of Mineral processing and Bioengineering, Central South University)
Sintering, Design and Equipment
14:30 - 15:50
Room: Room C
Contributions

14:30 MODERN DESIGN OF SINTER COOLERS - HOLGER KASSEBAUM (Paul Wurth)

14:50 PROTECTING SINTERING PLANTS – DURABILITY, SUSTAINABILITY AND EFFICIENCY IN WEAR PROTECTION - JENS LASKOWSKI (Welding Alloys GmbH)

15:10 TECHNOLOGIES FOR IMPROVEMENT OF SINTER PLANTS - MATHIAS HOFFMANN (Paul Wurth S.A.)

15:30 NEW TYPE OF PARTITION WALLS IN A PELLETIZING PLANT: A THERMO MECHANICAL ANALYSIS - HANS ULRICH MARSCHALL (RHI AG)
15:50 Coffe Break
Coffe Break
15:50 - 16:15
16:15 Keynote - Prof. Schenk: EVALUATION OF THE CAPABILITIES OF DIRECT AND SMELTING REDUCTION PROCESSES TO ENHANCE THE ENERGY EFFICIENCY OF THE STEEL PRODUCTION IN EUROPE
EVALUATION OF THE CAPABILITIES OF DIRECT AND SMELTING REDUCTION PROCESSES TO ENHANCE THE ENERGY EFFICIENCY OF THE STEEL PRODUCTION IN EUROPE
16:15 - 16:45
Room: Room A
Contributions

16:15 EVALUATION OF THE CAPABILITIES OF DIRECT AND SMELTING REDUCTION PROCESSES TO ENHANCE THE ENERGY EFFICIENCY AND TO REDUCE THE CO2 EMISSION OF THE STEEL PRODUCTION IN EUROPE - JOHANNES SCHENK (Montanuniversitaet Leoben)
16:45 Blast Furnace, Operation and Control
16:45 - 18:25
Room: Room A
Contributions

16:45 STUDY ON EROSION OF LARGE BLAST FURNACE HEARTH AND TECHNIQUES TO PROLONG CAMPAIGN LIFE OF HEARTH - WANREN Xu (BaoShan Iron and Steel Co., Ltd.)

17:05 BLAST FURNACE PROCESS OPTIMIZATION WITH CLOSED-LOOP EXPERT SYSTEMS – 25 YEARS OF EXPERIENCE - BERNHARD SCHUERZ (Primetals Technologies Austria GmbH)

17:25 BLAST FURNACE PERFORMANCE WITH HIGHER PELLET IN BURDEN - GOUTAM KUMAR RAUT (Tata Steel Limited, India)

17:45 STRUCTURAL ASSESSMENT OF BLAST FURNACE HEARTH REFRACTORY SYSTEM - HAMID GHORBANI (Hatch Ltd)

18:05 DEVELOPMENT AND IMPLEMENTATION OF NEW MEASURING AND MONITORING SYSTEMS TO SUPPORT BF CONTROL - RONGSHAN Lin (AG der Dillinger Hüttenwerke)
CO2 Reduction and Energy Saving
16:45 - 18:25
Room: Room C
Contributions

16:45 HELPING TO ADDRESS ENVIRONMENTAL CONTROL IN IRON ORE PROCESSING, IRON MAKING, AND COKE HANDLING OPERATIONS THROUGH THE USE OF COMPUTATIONAL FLUID DYNAMICS (CFD) - JENNIFER WOLOSHYN (Hatch Ltd.)

17:05 NEW IRONMAKING PROCESS TO ENHANCE THE FLEXIBILITY OF ENERGY SUPPLY AND USE OF LOW GRADE RESOURCES - TAIHEI NOUCHI (JFE Steel Corporation)

17:25 CO2 ULTIMATE REDUCTION IN STEELMAKING PROCESS (COURSE50 PROJECT) - SHIGEAKI TONOMURA (Nippon Steel & Sumitomo Metal Corporation)

17:45 COKE DRY QUENCHING: A SOLUTION FOR ENVIRONMENTAL CONTROL AND ENERGY SAVING - RICCARDO CALCAGNO (Paul Wurth Italia SPA)

18:05 THE CIRCULAR ECONOMY: CARBON RECYCLING AND THE IRON INDUSTRY - TOBIAS PLATTNER (Primetals Technologies Austria GmbH)
Direct Reduction
16:45 - 18:25
Room: Room B
Contributions

16:45 DRIpax™ – THE NEW GENERATION OF DR PLANT PROCESS OPTIMIZATION - DIETER BETTINGER (Primetals Technologies Austria GmbH)

17:05 HIGH-CARBON DRI THE FEEDING MATERIAL TO IMPROVE PERFORMANCES AND DECREASE CO2 EMISSIONS IN BOTH BF AND EAF - ALESSANDRO MARTINIS (Danieli)

17:25 APPLICATION OF MIDREX TECHNOLOGIES IN INTEGRATED STEEL PLANTS; POSSIBLE REDUCTION OF ENVIRONMENTAL IMPACT AND OPEX - MARCO PERATO (Paul Wurth Italia)

17:45 SELECTION AND IMPLEMENTATION OF IRONMAKING TECHNOLOGY – EXPERIENCE, PRINCIPLES AND RISKS - YAKOV GORDON (Hatch Ltd.)

18:05 EFFECT OF HEATING RATE ON THE PROPERTIES OF TWO NONCOKING COALS USED IN TUNNEL KILN DIRECT REDUCTION OF IRON PROCESS - NAJIBEH TOLOUE FARROKH (Sharif University of Technology)
18:30 Conference Dinner: Boat Dinner (Best Paper Award Ceremony)
Boat Dinner (Best Paper Award Ceremony)
18:30 - 23:00
Wednesday, 14 September 2016
08:30 Blast Furnace, Operation and Control
08:30 - 10:10
Room: Room A
Contributions

08:30 CAREFUL CONTROL OF REFRACTORY LINING CONDITIONS ENSURES PROLONGED CAMPAIGN OF BLAST FURNACE - YAKOV GORDON (Hatch Ltd.)

08:50 ENERGY EFFICIENT TECHNOLOGY TO PRODUCE HOT METAL FROM TITANIA-MAGNETITE ORE - SERGEI ZAGAINOV (Ural Federal University (URFU))

09:10 OPTIMAL DISTRIBUTION OF SUPPLEMENTAL FUEL AND OXYGEN AMONGST FURNACES IN BLAST FURNACE SHOP - NIKOLAI SPIRIN (Ural Federal University (URFU))

09:30 ADVANCED SIGNAL PROCESSING OF TUYERE PRESSURE DATA TO DETECT REDUCED HOT WIND THROUGHPUT AND RACEWAY BLOCKAGES - STEFAN PUTTINGER (Johannes Kepler University Linz)

09:50 THE LONG WAY TO PCI IN LINZ – FIRST OPERATION EXPERIENCE - BERNHARD RUMMER (voestalpine Stahl GmbH)
Cokemaking, Operation and Control
08:30 - 09:50
Room: Room B
Contributions

08:30 COMMISSIONING OF 60 KG MOVABLE WALL OVEN AT THYSSENKRUPP STEEL EUROPE AG - MARC-ANDRE SCHULTEN (Thyssenkrupp Steel Europe AG)

08:50 THE NEW GERMAN PAH-REGULATIVE INFLUENCING COKEMAKING AT SCHWELGERN PLANT - PETER LISZIO (KBS Kokereibetriebsgesellschaft Schwelgern GmbH)

09:10 OPTIMIZATION OF COAL PREPARATION PLANT IN LINZ - THOMAS ABFALTERER (voestalpine Stahl GmbH)

09:30 CHANGING BULK DENSITY IN CARBONISATION BLENDS - RUTH POULTNEY (MATERIALS PROCESSING INSTIUTE, UK)
Ironmaking Fundamentals
08:30 - 09:50
Room: Room C
Contributions

08:30 EFFECT OF VOLATILE MATTER OF COAL ON VOLUME CHANGE AND REDUCTION OF IRON ORE/COAL COMPOSITE PELLETS - CHANG HAO-HSUN (NCKU, Department of Materials Science and Engineering)

08:50 EXAMINATION OF COKE REACTIVITY USING MICRO-CT ANALYSIS - DAVID R. JENKINS (CSIRO)

09:10 TOWARDS PREDICTION OF COAL CONVERSION BEHAVIOUR IN THE BLAST FURNACE - HAI THONG HO (RWTH Aachen University)

09:30 EFFECT OF SILICA ON THE REDUCTION KINETICS OF CaO-Fe2O3-SiO2 SYSTEM - CHENGYI DING (Chongqing University)
10:10 Coffee Break
Coffee Break
10:10 - 10:45
10:45 Keynote - Dr. Yi: UPDATES ON THE FINEX®, A COMMERCIALLY PROVEN ALTERNATIVE IRON-MAKING PROCESS
UPDATES ON THE FINEX®, A COMMERCIALLY PROVEN ALTERNATIVE IRON-MAKING PROCESS
10:45 - 11:15
Room: Room A
Contributions

10:45 UPDATES ON THE FINEX®, A COMMERCIALLY PROVEN ALTERNATIVE IRON-MAKING PROCESS - SANG-HO YI (POSCO)
11:15 Cokemaking Fundamentals
11:15 - 13:15
Room: Room C
Contributions

11:15 THE EFFECT OF BINARY AND TENARY MINERAL COMBINATIONS ON THE REACTIVITY OF A COKE ANALOGUE - RAYMOND J. Longbottom (University of Wollongong)

11:35 NEW THEORY OF COAL BLENDING BASED ON NOVEL THERMOPLASTICITY MEASUREMENT; PERMEATION DISTANCE - YUSUKE DOHI (Steel Research Laboratory, JFE Steel Corp.,)

11:55 EFFECTS OF BRIQUETTE BLEND ON PACKING STRUCTURE OF FINE COAL PART - WATANABE MASAHIKO (1Ironmaking Research Lab., Process Research Laboratories, Nippon Steel & Sumitomo Metals Corp.,)

12:15 THE EFFECT OF BROWNCOAL ADDITION ON COKE STRENGTH - TENGFEI SONG (School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing,)

12:35 APPLICATION OF SMALL ANGLE NEUTRON SCATTERING TO UNDERSTAND NANOPOROSITY OF COKES - RICHARD SAKUROVS (CSIRO Energy)

12:55 Can we rely on quality parameters of coke from laboratory coking installation? - B. MERTAS (Institute for Chemical Processing of Coal, Zabrze, Poland)
Smelting Reduction
11:15 - 12:15
Room: Room B
Contributions

11:15 FINEX® - AN INNOVATIVE AND ENVIRONMENT FRIENDLY IRONMAKING PROCESS - NORBERT REIN (Primetals Technologies Austria GmbH)

11:35 COREX® - AN ALTERNATIVE FOR HOT METAL PRODUCTION IN A CHALLENGING ENVIRONMENT - CRISTIAN BÖHM (Primetals Technologies Austria GmbH)

11:55 THE STUDY OF CORE-BORED TAPHOLE CLAY USED IN FINEX - PARK JONG MOON (CHOSUN REFRACTORIES, Co., Ltd)
Blast Furnace, Design and Equipment
11:15 - 13:35
Room: Room A
Contributions

11:15 THE USE OF PLASMA TORCHES IN BLAST FURNACE IRONMAKING - JOHN HYDE (Hatch Ltd.)

11:35 KÜTTNER’S PULVERIZED COAL INJECTION TECHNOLOGY – LATEST DEVELOPMENTS - FRANZ REUFER (Küttner GmbH & Co. KG, Germany)

11:55 LONG LIFE COPPER STAVE FOR BLAST FURNACE OF NIPPON STEEL & SUMIKIN ENGINEERING - MAKOTO GOTO (Nippon Steel & Sumikin Engineering CO., LTD.)

12:15 BLAST FURNACEMODERN DESIGN – MODULAR CONSTRUCTION - REINOUD VAN LAAR (Danieli Corus BV)

12:35 EQUIPMENT FOR THE INJECTION OF TI-CONTAINING POWDERS INTO THE BLAST FURNACE TUYERES - CHRISTIAN WOLF (Velco GmbH)

12:55 BLAST FURNACE COOLING STAVE DESIGN - MARTIN SMITH (Primetals Technologies)

13:15 DEVELOPMENT OF REACTION BONDED SiC BRICK WHICH HAVE HIGH THERMALL CONDUCTIVITY FOR BLAST FURNACE - YUN CHEOL HONG (CHOSUN REFRACTORIES, Co., Ltd.)
12:15 Cokemaking, Design and Equipment
12:15 - 13:15
Room: Room B
Contributions

12:15 DEVELOPMENT OF A VERTICAL CHAMBER COKING OVEN FOR UPGRADING LIGNITES OR SUB-BITUMINOUS COAL - MATTHIAS SPÖTTLE (ThyssenKrupp Industrial Solutions AG)

12:35 STUDIES ON MINERALOGICAL AND THERMO-MECHANICAL PROPERTIES OF DENSE SILICA BRICKS FOR COKE OVEN SOLE AND WALL LINING - BIRENDRA PRASAD (OCL India Limited)

12:55 REFRACTORIES FOR COKE OVEN WALL - OPERATOR'S PERSPECTIVE - KIRILL ANDREEV (Tata Steel Europe)
13:35 Lunch
Lunch
13:35 - 14:35