Name: 5th International High Manganese Steel Conference - HMNS 2022
Start: 2022-05-23T08:00:00+02:00
End: 2022-05-25T16:50:00+02:00
Location: voestalpine Stahlwelt

Monday, 23 May 2022

09:00 Registration & Coffee
Registration & Coffee
09:00 - 10:30

10:30 Opening
Opening
10:30 - 10:45
Room: Room 1
10:45 Plenary Lecture: Dr. Pichler/Prof. Schneider/Prof.Krizan
Dr. Pichler/Prof. Schneider/Prof.Krizan
10:45 - 11:40
Room: Room 1
Contributions

10:45 Research and development of steel grades with elevated Mn content at voestalpine and its scientific partners - Andreas Pichler (voestalpine Stahl GmbH) Reinhold Schneider (Univ. of Appl. Sciences Upper Austria) Daniel Krizan (voestalpine Steel Division GmbH Linz)
11:40 Keynote Lecture: Prof. Bleck
Prof. Bleck
11:40 - 12:10
Room: Room 1
Contributions

11:40 Alloying and Processing of Medium Manganese Steels for Forging Applications - Wolfgang Bleck (Steel Institute, RWTH Aachen University)
12:10 Lunch
Lunch
12:10 - 13:30
13:30 Failure, Damage and Hydrogen
13:30 - 15:10
Room: Room 3
Contributions

13:30 High strength medium Manganese TRIP steel with increased hydrogen resistance due to heterogeneous Mn distribution (virtual presentation) - Dirk Ponge (Max-Planck-Institut für Eisenforschung, Düsseldorf, Germany)

13:55 Hydrogen charging behavior of the UNSM processed high-Mn steels - Jung Gi Kim (Gyeongsang National University)

14:20 Localization, damage and fracture properties of Medium Manganese Steels - Sebastian Münstermann (RWTH Aachen University)

14:45 Hydrogen associated decohesion and localized plasticity in a high-Mn austenite-ferrite lightweight steel (virtual presentation) - Xizhen Dong (Max-Planck-Institut für Eisenforschung)
Structure-Property Relation in High Mn Steels
13:30 - 15:10
Room: Room 2
Contributions

13:30 Effect of Nitrogen and Grain Size on Mechanical Properties of High Manganese TWIP Steels - Seyed Nima Babaei (Steel Institute of RWTH Aachen University)

13:55 Investigation of detwinning due to cyclic tensile straining in Hadfield steel - Marina Lukas (Materials Center Leoben Forschung GmbH)

14:20 Thermal treatment effect on cold rolled high Mn lightweight steels - Carlo Mapelli (Politecnico di Milano) Giacomo Villa (Politecnico di Milano) Lorenzo Mereghetti (Politecnico di Milano)

14:45 Effect of the heat generated during deformation at high strain rates on the structure and properties of high manganese steels with twinning as the dominant deformation mechanism. - Magdalena B. Jabłońska (Silesian University of Technology)
Structure-Property Relation in Medium Mn Steels
13:30 - 15:10
Room: Room 1
Contributions

13:30 Microstructural evolution and tensile behaviour of V-added medium-Mn steel - Tak Min Park (Hanyang University)

13:55 Relationship between the microstructural morphology and mechanical response of medium-Mn steels - Jeongho Han (Hanyang University)

14:20 Effect of carbon on dislocation density and hardness in ausformed medium Mn martensitic steel (virtual presentation) - Takuro Masumura (Kyushu University)

14:45 Strain distribution in duplex martensitic medium Mn steel (virtual presentation) - Takuya Maeda (Kyushu University)
15:10 Coffee Break
Coffee Break
15:10 - 15:40
15:40 Failure, Damage and Hydrogen
15:40 - 16:30
Room: Room 3
Contributions

15:40 Using high speed camera to understand edge cracking during hot rolling of lightweight Fe-Mn-Al-C steels - Aniruddha Dutta (Arcelormittal Global R&D Gent)

16:05 Grain boundary κ-carbides in high manganese lightweight steel: Degradation assessment and potential solutions (virtual presentation) - Mohamed Elkot (1 Max-Planck-Institut für Eisenforschung, Germany. 2 Suez University, Egypt.)
Structure-Property Relation in High Mn Steels
15:40 - 17:20
Room: Room 2
Contributions

15:40 Incomplete γ → ε Martensitic Transformation in a High Mn Alloy - Young-Kook Lee (Yonsei university)

16:05 Design and properties of additively manufactured high-manganese steels - Christian Haase (RWTH Aachen University)

16:30 Structure-Property Relationship in Additively Manufactured High-Manganese Steels - Dilay Kibaroglu (RWTH Aachen)

16:55 Direct monitoring of twinning/detwining in a TWIP steel under reversed cyclic loading (virtual presentation) - Véronique DOQUET (CNRS UMR7649, Laboratoire de mécanique des Solides, Ecole Polytechnique)
Structure-Property Relation in Medium Mn Steels
15:40 - 17:20
Room: Room 1
Contributions

15:40 Toughening mechanism of medium Mn martensitic steel treated with thermomechanical control process and intercritical annealing-virtual presentation - Kyosuke Matsuda (Kyushu University)

16:05 Comparison of dynamic mechanical behavior and microstructure features in thermo-mechanically rolled 3Mn-Al and 5Mn-Al sheet steels - Adam Grajcar (Silesian University of Technology)

16:30 Influence of second intercritical annealing temperature on austenite grain size and its thermal stability in 5Mn steel - Mateusz Morawiec (Silesian University of Technology)

16:55 Nano-precipitation and austenite reversion in a Cu and Ni containing medium-Mn steel - Wenwen Song (Steel Institute, RWTH Aachen University)
17:30 Welcome Reception
Welcome Reception
17:30 - 20:00

voestalpine Plant Tour (for registered participants of the plant Tour)
voestalpine Plant Tour (for registered participants of the plant Tour)
17:30 - 18:30
Information about the voestalpine Plant Tour: https://www.voestalpine.com/stahlwelt/en/World-of-Discovery/Plant-Tour/
Tuesday, 24 May 2022
08:30 Keynote Lecture: Prof. Kim
Prof. Kim
08:30 - 09:00
Room: Room 1
Contributions

08:30 Recent progress and understanding N behavior in Cr-Mn-(C,N) austenitic steels - virtual presentation - Sung-Joon Kim (Graduate Institute of Ferrous Technology, POSTECH)
09:00 Break to switch the room
Break to switch the room
09:00 - 09:05
09:05 High Mn Stainless Steels
09:05 - 10:20
Room: Room 1
Contributions

09:05 Advanced austenitic stainless steels with high N and Mn - Guocai Chai (Sandvik group)

09:30 Comparison of passive films formed on a high-Cr adding high-Mn steel and typical austenitic stainless steels (virtual presentation) - Kwang Kyu Ko (Gyeongsang national university, Repulic of Korea)

09:55 Quenching and Partitioning of Metastable Austenitic CrMnNi-Steels - Marco Wendler (TU Bergakademie Freiberg/ IEST)
Medium Mn Steels
09:05 - 10:20
Room: Room 2
Contributions

09:05 Revealing the austenite reversion mechanism in medium-Mn steel by innovative cyclic partial-transformation annealing - Xiao Shen (Steel Institute, RWTH Aachen University)

09:30 Consideration of critical aspects concerning large-scale production and use in automotive applications based on an optimized alloying concept for a batch-annealed medium-Mn780 grade - Katharina Steineder (Researcher)

09:55 Austenite Nucleation and Growth as a Function of Starting Microstructure in a Fe-0.15C-5.56Mn-1.1Si-1.89Al Medium-Mn Steel - Joseph McDermid (McMaster University)
Processing
09:05 - 10:20
Room: Room 3
Contributions

09:05 Control of liquid metal embrittlement induced cracking during resistance spot welding of a medium Mn high ductile Zn-coated hot press forming steel - Radhakanta Rana (Tata Steel)

09:30 Mechanical integrity and microstructural changes in the welded joints of third generation automotive AHSS in as hot rolled and after post-annealing - JOSE LUIS HERNANDEZ RIVERA (CONACYT-UNIVERSIDAD AUTONOMA DE SAN LUIS POTOSI)

09:55 Microstructural characterization and tensile properties of a medium Mn steel welded joint - Ana Claudia González Castillo (Instituto de Metalurgía-UASLP)
10:20 Coffee Break
Coffee Break
10:20 - 10:50
10:50 High Mn Stainless Steels
10:50 - 11:40
Room: Room 1
Contributions

10:50 Comparative studies of passive layers of CrMnN and CrNi austenitic steel stainless grades highlighting the effect of manganese - Rainer Fluch (voestalpine BÖHLER Edelstahl GmbH& CoKG)

11:15 Strain-induced α´-Martensite Evolution of Fe-17Cr-8.6Mn-4Ni-0.17N Steel at different Temperatures - Caroline Quitzke (Institute of Iron and Steel Technology, TU Bergakademie Freiberg)
Medium Mn Steels
10:50 - 12:30
Room: Room 2
Contributions

10:50 Grain size evolution during intercritical annealing of 5% medium-Mn steel - Adam Skowronek (Silesian University of Technology)

11:15 Effect of heating and cooling rates on the microstructure of a double soaked medium-manganese Al-alloyed steel - Aleksandra Kozłowska (Silesian University of Technology)

11:40 Austenite Evolution and Mn Redistribution during Double Soaking - Joshua Mueller (Los Alamos National Lab, Colorado School of Mines)

12:05 Solute Enrichment at the α/γ Phase Boundary in Medium Mn Steel (virtual presentation) - Faisal Waqar Syed (Max-Planck-Institut für Eisenforschung)
Processing
10:50 - 12:30
Room: Room 3
Contributions

10:50 Resetting process into medium-Mn steel to recover the reduced ductility by cold working - Mun Sik Jeong (Hanyang University)

11:15 How fast laser OES based slag analysis enables in situ process management and thereby limits the loss of Mn into slag - Alexander Schlemminger (QuantoLux GmbH)

11:40 Selective Oxidation and Reactive Wetting of Medium-Manganese Third-Generation Advanced High Strength Steels - Joseph McDermid (McMaster University)

12:05 Applicability improvement by deformation mechanism-controlled rolling of high manganese steels - Sebastian Wesselmecking
12:30 Lunch
Lunch
12:30 - 14:00
14:00 Alloy Design
14:00 - 15:40
Room: Room 3
Contributions

14:00 Design of lightweight maraging steel - Chae Young Kim (Hanyang University)

14:25 Novel cryogenic impact toughness of 200 J in Low-Ni martensitic steels - Hyun Wook Lee (Hanyang university)

14:50 Development of high-Mn high strength steel for electric vehicles - Clara Herrera (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)

15:15 A study of the deformation mechanisms and scaling up of a medium Mn steel with 8 wt% Mn - Thomas Kwok (Imperial College London)
Mn Quenching&Partitioning Steels
14:00 - 15:40
Room: Room 2
Contributions

14:00 Negative strain rate sensitivity in a quenching and partitioning medium Mn steel (virtual presentation) - Mingxin Huang (The University of Hong Kong)

14:25 Intergranular and interphase segregation in Medium Mn TRIP steels - Kangying Zhu (Arcelormittal Global R&D)

14:50 The potential of Q&P-Treated Medium Manganese Steels for Press-Hardening Applications - Ulrich Krupp (Steel Institute of RWTH Aachen University)

15:15 The effect of intercritical annealing temperature on warm-rolled medium manganese steel - YIngchao Zhang (University of Science and Technology Beijing)
15:40 Coffee Break
Coffee Break
15:40 - 16:10
16:10 Applications
16:10 - 17:25
Room: Room 3
Contributions

16:10 High Manganese Steels for the Oil, Gas, and Energy Industry Applications: State-of-the-art & Emerging Opportunities (virtual presentation) - H.W. JIN (ExxonMobil Research & Engineering)

16:35 Development of a new high-strength maraging steel for aerospace applications. - Clara Herrera (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)

17:00 High Manganese Steel for Mooring Chain Applications (virtual presentation) - Harpreet Sidhar (ExxonMobil Upstream Research Company)
Mn Quenching&Partitioning Steels
16:10 - 17:50
Room: Room 2
Contributions

16:10 Microstructure and tensile properties of room temperature Q&P processed 0.25C – 4.0Mn – 1.5Si steel starting from chemically heterogeneous microstructure - Guiyoung Gu (Graduate Institute of Ferrous & Energy Technology, POSTECH)

16:35 Correlation between microstructure and ductility characteristics of lean medium Mn Q&P steels - Simone Kaar (voestalpine Stahl GmbH)

17:00 Effect of Si and Al on retained austenite stabilization during Q&P and galvannealing process - Matthias Wallner

17:25 Understanding the contributions on the work-hardening of a 5 wt.% manganese quenched and partitioned steel - Eve-Line Cadotte (Université Libre de Bruxelles)
18:00 Conference Dinner
Conference Dinner
18:00 - 21:00
Wednesday, 25 May 2022
09:00 Keynote Lecture: Prof. De Moor
Prof. De Moor
09:00 - 09:30
Room: Room 1
Contributions

09:00 Processing, Properties, and Microstructure Interrelationships in Medium Manganese Steels - Emmanuel De Moor (Colorado School of Mines)
09:30 Break
Break
09:30 - 09:35
09:35 Advanced Characterization Methods
09:35 - 10:50
Room: Room 1
Contributions

09:35 Analysis of mechanical properties in ultrafine single variant martensite in 5-7%Mn steels by synchrotron radiation - Shiro Torizuka (University of Hyogo)

10:00 Correlative Diffraction Studies of Deformed Medium Manganese Steel Grades - Christian Commenda (voestalpine Steel Linz, Department for Microstructure and Surface Analysis)

10:25 In situ investigation of medium manganese microstructure formation during intercritical annealing by high energy X-ray diffraction on synchrotron beamline - Mathias Lamari (Institut Jean Lamour)
Modelling and Simulation
09:35 - 10:50
Room: Room 2
Contributions

09:35 Computational alloy design of Medium-Mn steels - Gregory Haidemenopoulos (University of Thessaly) John Aristeidakis (University of Thessaly)

10:00 Ab initio based investigation of the role of retained austenite in Hydrogen embrittlement of steels - Ali Tehranchi (Max planck ins. for Iron research)

10:25 Modeling of mechanical properties of metastable austenitic Cr-Mn-Ni steels with TRIP and TWIP effect - Michael Hauser (TU Bergakademie Freiberg)
10:50 Break
Break
10:50 - 11:20
11:20 Advanced Characterization Methods
11:20 - 12:35
Room: Room 1
Contributions

11:20 Advanced characterization of medium Mn steel using a combination of EPMA and EBSD - Mélanie Gauvin (OCAS)

11:45 In situ determination of austenite mechanical stability in medium manganese steels by high energy X-ray diffraction on synchrotron beamline - Mathias Lamari (Institut Jean Lamour)

12:10 TEM characterization of stability of retained austenite in medium Mn steel under severe deformation - Ítalo Oyarzabal (Université de Lorraine)
Modelling and Simulation
11:20 - 12:35
Room: Room 2
Contributions

11:20 Constitutive and transformation kinetics modeling of ε-, α΄-Martensite and mechanical twinning in Medium-Mn steels - John S. Aristeidakis (Department of Mechanical Engineering, University of Thessaly, Volos, Greece)

11:45 Simulation of the TWIP/TRIP effect of high manganese steels in dependence of the applied stress condition - Angela Quadfasel (Institute of Metal Forming)

12:10 High temperature thermodynamics of the Fe-C-Mn system; new experimental data for the Fe-C-10 and 20 wt.-% Mn system - Peter Presoly (Montanuniversität Leoben)
12:35 Closing
Closing
12:35 - 12:40
Room: Room 1

12:40 Lunch
Lunch
12:40 - 14:00

13:15 "Stahlwelt" Exhibition

13:15 - 14:15

14:00 End of Conference
End of Conference
14:00 - 14:01