Name: Metal Additive Manufacturing Conference - MAMC 2021
Start: 2021-11-03T08:00:00+01:00
End: 2021-11-05T18:00:00+01:00
Location: Wirtschaftskammer Österreich

Metal Additive Manufacturing Conference - MAMC 2021

from Wednesday, 3 November 2021 (08:00) to Friday, 5 November 2021 (18:00)

Monday, 1 November 2021
Tuesday, 2 November 2021
Wednesday, 3 November 2021

10:00 Registration & Coffee
Registration & Coffee
10:00 - 11:00
Room: Julius Raab Saal

11:00 Opening: Opening
Opening
11:00 - 11:15
Room: Julius Raab Saal
11:15 Plenary Talk: Nikolai Zaepernik (Senior Vice President - EOS) & Stefan Seidel (CTO-Pankl Racing Systems)
Nikolai Zaepernik (Senior Vice President - EOS) & Stefan Seidel (CTO-Pankl Racing Systems)
11:15 - 11:45
Room: Julius Raab Saal
Contributions

11:15 AM on the road to serial production - Nikolai Zaepernik (Chief Business Officer, Managing Director - EOS GmbH) Stefan Seidel (CTO, Pankl Racing Systems AG)
11:45 Plenary Talk: Ralf Carlström (President - EPMA)
Ralf Carlström (President - EPMA)
11:45 - 12:15
Room: Julius Raab Saal
Contributions

11:45 EPMA- the main promotor of metal powder technologies in Europe - Ralf Carlström (President - EPMA)
12:15 Plenary Talk: Mohsen Seifi (Director - ASTM)
Mohsen Seifi (Director - ASTM)
12:15 - 12:45
Room: Julius Raab Saal
Contributions

12:15 Progress in Additive Manufacturing Standardization - Mohsen Seifi (Director, Global Additive Manufacturing Programs, ASTM International)
12:45 Plenary Talk: Nader Asnafi (Prof. Örebro University) & Suk-Hwan Suh (Director/Professor of Research Center for Smart Factory)
Nader Asnafi (Prof. Örebro University) & Suk-Hwan Suh (Director/Professor of Research Center for Smart Factory)
12:45 - 13:15
Room: Julius Raab Saal
Contributions

12:45 Cyber-Physically controlled Smart Additive Manufacturing system (CPSAM) - Ian Stroud (POSTECH) Nader Asnafi (Örebro University, School of Science & Technology) Suk-Hwan Suh (POSTECH, Research Center for Smart Factory)
13:15 Lunch
Lunch
13:15 - 14:30
Room: Julius Raab Saal
14:30 AM PROCESS and QUALITY CONTROL
14:30 - 15:50
Room: SAAL 1
Contributions

14:30 Correlative microstructure investigations of additive manufactured parts - Mihaela Albu (ZFE Graz)

14:50 Multiscale Microstructural Investigation of 17-4 PH Stainless Steel Produced by Laser Powder Bed Fusion - Maxwell Moyle (University of New South Wales)

15:10 Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system - Siegfried Arneitz (Institute of Materials Science, Joining and Forming, Graz University of Technology)

15:30 Powder bed fusion additive manufacturing - comparison of different process simulation methods - Etienne Bonnaud (SWERIM)
POWDER FOR MAM
14:30 - 15:50
Room: Julius Raab Saal
Contributions

14:30 Intelligent powder production: Data-driven optimization of productivity - Yannik Wilkens (SMS group GmbH)

14:50 Manufacturing of metallic powders for AM market by ultrasonic atomization method - Michał Zalewski

15:10 Further development and deployment of powder spreadability testing - Christopher Hulme-Smith (KTH Royal Institute of Technology)

15:30 Potential causes for cracking of a laser powder bed fused carbon-free FeCoMo alloy - Jan Platl (Montanuniversität Leoben - Department of Materials Science)
15:50 Coffee Break
Coffee Break
15:50 - 16:20
Room: Julius Raab Saal
16:20 AM PROCESS and QUALITY CONTROL
16:20 - 17:20
Room: SAAL 1
Contributions

16:20 The influence of laser scanning strategies on the crystallographic texture evolution and mechanical properties of LB-PBF 316L - Sabine Bodner (Montanuniversität Leoben)

16:40 Residual stress heterogeneity along the SLM POST-Processing chain of the carburizing steel 20MnCr5 after stress relief - Lucas Robatto (Instituto Tecnológico de Aeronáutica)

17:00 Cracking behavior of a Zr-Blended Al-Zn-Mg alloy processed by powder bed fusion of metals using a laser beam under different process gas mixtures - Siegfried Baehr (Linde GmbH / Technical University of Munich)
POWDER FOR MAM
16:20 - 17:20
Room: Julius Raab Saal
Contributions

16:20 Energy efficient production of spherical powders for DMLS Applications - Martin Dopler (Metalpine GmbH)

16:40 A Novel Vacuum Inert Gas Atomization System enters the Market – Design, Experience and Outlook - Juergen Cornelius (INTECO melting and casting technologies GmbH)

17:00 Influence of powder recycling on the feedstock attributes and the final properties of SS316L components processed by L-PBF - Timothée Delacroix (CEA)
17:20 Welcome Reception
Welcome Reception
17:20 - 19:20
Room: Julius Raab Saal
Thursday, 4 November 2021
09:00 Plenary Talk: Peter Mayr (Head of the Chair for Materials Technology of Additive Manufacturing, Technical University Munich)
Peter Mayr (Head of the Chair for Materials Technology of Additive Manufacturing, Technical University Munich)
09:00 - 09:30
Room: Julius Raab Saal
Contributions

09:00 The path from arc welding to additive manufacturing of multi-material parts using direct energy deposition - Peter Mayr (Head of the chair Materials Engineering of Additive Manufacturing, TU München)
09:30 Plenary Talk: Ute Schäfer (Head of FE Experimental Neurotraumatology, Medical University Graz)
Ute Schäfer (Head of FE Experimental Neurotraumatology, Medical University Graz)
09:30 - 10:00
Room: Julius Raab Saal
Contributions

09:30 Additive manufacturing of implants directly in the clinic: chances and challenges - top or flop? - Ute Schäfer (Medical University Graz)
10:00 Coffee Break
Coffee Break
10:00 - 10:30
Room: Julius Raab Saal
10:30 ADDITIVE DESIGN
10:30 - 11:50
Room: SAAL 1
Contributions

10:30 On Fatigue Analyses of Additive Manufacturing Parts: Review of Hybrid Techniques - Amir Horr (AIT, Austrian Institute of Technology)

10:50 Topology optimized unit cells for laser powder bed fusion - Beatrix Elsner (Simufact Engineering GmbH)

11:10 Integration of cooling channels in additive manufactured parts using PMD® (Plasma Metal Deposition) - Erich Neubauer (RHP Technology GmbH)

11:30 Integration of electrical conductors into metallic structures by DED technologies - Rudolf Gradinger
POWDER FOR MAM
10:30 - 11:50
Room: Julius Raab Saal
Contributions

10:30 Investigation of the Impact of Powder Shape on Spreading Dense Layers Using the Spreading Tester - Marco Mitterlehner (voestalpine BÖHLER Edelstahl GmbH & Co KG)

10:50 Zinc-Magnesium Alloys for Bioresorbable Medical Implants manufactured by Laser Powder Bed Fusion - Maximilian Voshage (RWTH Aachen University - DAP)

11:10 Processing elemental powder blends with miniaturized process chamber designed for material development with laser powder bed fusion - Andreas Vogelpoth (Fraunhofer Institut für Lasertechnik)

11:30 New high strength and corrosion resistant stainless steels by AM via modification of feedstock powders - Emilie H. Valente (Technical University of Denmark)
11:50 Lunch
Lunch
11:50 - 13:00
Room: Julius Raab Saal
13:00 Plenary Talk: Martina Meisnar, Laurent Pambaguian (ESA European Space Agency)
Martina Meisnar, Laurent Pambaguian (ESA European Space Agency)
13:00 - 13:30
Room: Julius Raab Saal
Contributions

13:00 Past and future challenges for Additive Manufacturing in Space Industry - Martina Meisnar (Materials & Processes Engineer, European Space Agency) Laurent Pambaguian (Materials & Processes Engineer, European Space Agency)
13:30 Break
Break
13:30 - 13:35
Room: Julius Raab Saal
13:40 LASER MELTING, ELECTRON BEAM MELTING & DIRECT ENERGY DEPOSITION PROCESSES
13:40 - 15:00
Room: SAAL 1
Contributions

13:40 Improvement of part accuracy by combination of pulsed wave (pw) and continuous wave (cw) Laser Powder Bed Fusion - Thomas Laag (Fraunhofer, ILT)

14:00 LB-PBF processing limits for Cr-Mn-Mo low alloy structural steels - Robert Steinlechner (TU Wien)

14:20 Laser Powder Bed Fusion of Carbon-Containing Ferrous Alloys: Martensite Formation and its Properties - William Hearn (Chalmers University of Technology)

14:40 Influence of Laser Metal Deposition Process Parameters on Geometric Accuracy and Residual Stresses of IN718 Thin-Walled Structures - Marie-Noemi Bold (RWTH Aachen University)
RECENT RESEARCH TOPICS
13:40 - 15:00
Room: Julius Raab Saal
Contributions

13:40 The role of interfaces during metal additive manufacturing - Sophie Primig (School of Materials Science & Engineering, UNSW Sydney)

14:00 Lithography-based additive manufacturing of functional metal components - Gerald Mitteramskogler (Incus GmbH)

14:20 Serial production of additive manufacturing orthopedic implants using SLM and EBM. - Jelle ten Kate (FMI Instrumed)

14:40 Integration of optical fibers in parts resulting from additive metal fabrication processes - QUENTIN POUILLE (CEA)
15:00 Coffee Break
Coffee Break
15:00 - 15:30
Room: Julius Raab Saal
15:30 APPLICATIONS
15:30 - 17:10
Room: Julius Raab Saal
Contributions

15:30 On the additive processing of a premium tool steel using high temperature systems: An holistic discussion on challenges and potentials - Liang Wu (voestalpine Additive Manufacturing Center GmbH)

15:50 Microstructure and mechanical performance of Sandvik Osprey Inconel 625 produced via laser powder bed fusion - Leandro Feitosa (Sandvik Additive Manufacturing)

16:10 HalHigh-strength and corrosion resistant by AM-New aluminium alloys for industrial 3D-printing, a contribution for sustainable manufacturing. - Michael Härtel (AM Metals GmbH) Tanja Pfeifer (Pankl Racing Systems)

16:30 3D printed tools to reduce residual stresses, thinning and martensite content during deep drawing of metastable austenitic steels - Bakir Mehic (University of Applied Sciences Upper Austria, Institute of Materials Science, Joining and Forming, Graz University of Technology)

16:50 Mg-Zn-Zr-Ca Alloys Prepared by Mechanical Alloying for Selective Laser Melting - Doina Raducanu (University Politehnica of Bucharest)
LASER MELTING, ELECTRON BEAM MELTING & DIRECT ENERGY DEPOSITION PROCESSES
15:30 - 17:10
Room: SAAL 1
Contributions

15:30 Investigation of Cooling Rate and Microstructure with the Aim of Alloy Development using Extreme High Speed Laser Material Deposition (EHLA) exemplified by 316L - Marie-Noemi Bold (RWTH Aachen University)

15:50 Process gas and its influence on additive manufactured AlSi10Mg - Pierre Forêt (Linde GmbH)

16:10 Thermomechanical and thermochemical endurance of hot work tool steels and PVD-coatings for high pressure die casting - Mirnes Berbic (ÖGI)

16:30 Laser Powder Bed Fusion of bioresorbable Magnesium-Rare Earth alloy for orthopaedic application: A parameter study including a novel tensile scaffold design - Felix Benn (Queen's University Belfast)

16:50 3D printing of amorphous metals, challenges and opportunities - Sepide Hadibeik (Austrian Academy of Sciences (ÖAW))
17:30 Conference Dinner- Austrian Evening "Buschenschank Fuhrgassl-Huber", Departure together per bus. Meeting Point: 17:30 in front of the location entrance
Conference Dinner- Austrian Evening "Buschenschank Fuhrgassl-Huber", Departure together per bus. Meeting Point: 17:30 in front of the location entrance
17:30 - 20:30
Room: Buschenschank Fuhrgassl-Huber
Friday, 5 November 2021
09:00 Plenary Talk: Armin Wiedenegger (Managing Director -voestalpine Additive Manufacturing Center)
Armin Wiedenegger (Managing Director -voestalpine Additive Manufacturing Center)
09:00 - 09:30
Room: Julius Raab Saal
Contributions

09:00 Individualized series production made possible by Additive Manufacturing - Armin Wiedenegger (Managing Director, voestalpine Additive Manufacturing GmbH)
09:30 Plenary Talk: Benedikt Blitz (Managing Director - SMR Premium Gmbh)
Benedikt Blitz (Managing Director - SMR Premium Gmbh)
09:30 - 10:00
Room: Julius Raab Saal
Contributions

09:30 Update on the World Market for Metal Powders & Steels - Benedikt Blitz (SMR Premium GmbH)
10:00 Coffee Break
Coffee Break
10:00 - 10:30
Room: Julius Raab Saal
10:30 MODELLING & SIMULATION
10:30 - 11:30
Room: SAAL 1
Contributions

10:30 Prediction of residual stress development and subsequent springback deformation for the laser powder bed fusion process using multiple modelling strategies and a comprehensive validation framework - David Ohlsson (RISE)

10:50 Creating Competitive Metal AM Production with High Volume and Flexibility Based on Digital Twins - Anders Hjermitslev (Danish Technological Institute)

11:10 Computational design of high γ′ nickel-based superalloys for laser powder bed fusion - Patrick Köhnen (RWTH Aachen University Digital Additive Production)
POST-PROCESSING
10:30 - 12:10
Room: Julius Raab Saal
Contributions

10:30 Evolution of microstructure and properties after heat treatment and HIP of E-PBF cold work tool steel - Mikael Åsberg (Karlstad University)

10:50 Optimized HIP and Heat Treatment for Fatigue Strength of Additively Manufactured Ti6Al4V - Magnus Ahlfors (Quintus Technologies AB)

11:10 Effect of post-processing thermal treatments on fatigue resistance of additively manufactured 18Ni300 maraging steel - Paul A Davies (Powder Group - Sandvik)

11:30 Effect of cold rolling on the microstructure and the mechanical properties of 316L stainless steel parts produced by Laser Powder Bed Fusion - Louis Lemarquis (CEA)

11:50 Microstructure and heat treatment of a ultrahigh strength Maraging steel fabricated by Direct laser metal deposition - Sasan Amirabdollahian (University of Trento)
12:10 Lunch
Lunch
12:10 - 13:30
Room: Julius Raab Saal