Metal Additive Manufacturing Conference 2018

Name: Metal Additive Manufacturing Conference 2018
Start: 2018-11-21T08:00:00+01:00
End: 2018-11-23T18:00:00+01:00
Location: Wirtschaftskammer Österreich

21–23 Nov 2018

Wirtschaftskammer Österreich

Europe/Vienna timezone

Registration is closed!

Support

Author List

Khaled Abdel Ghany
- Co-author in EVALUATING ADDITIVE MANUFACTURING TECHNIQUE TO PRODUCE DIES FOR HIGH-PRESSURE DIE CASTING
Mohamed Abdel-Latif
- Co-author in EVALUATING ADDITIVE MANUFACTURING TECHNIQUE TO PRODUCE DIES FOR HIGH-PRESSURE DIE CASTING
Mihaela Albu
- Author in MICROSTRUCTURE INVESTIGATION OF POWDERS FOR ADDITIVE MANUFACTURING
Adam Allen
- Co-author in LASER ADDITIVE MANUFACTURING OF NIOBIUM SILICIDE-BASED HIGH TEMPERATURE MATERIALS
Francesco Andreatta
- Author in CORROSION BEHAVIOUR OF AM 316L STAINLESS STEEL
- Co-author in HIGH TEMPERATURE TRIBOLOGICAL BEHAVIOUR OF AISI 316L PRODUCED BY SLM TECHNIQUE.
Cristina Arévalo
- Co-author in PRELIMINARY STUDY OF THE PROCESSING PARAMETERS EFFECT ON THE MICROSTRUCTURE AND PROPERTIES OF TITANIUM GRADE 1 SPECIMENS FABRICATED VIA ADDITIVE MANUFACTURING
Enrique Ariza
- Co-author in XL MULTI-MATERIAL AM USING AN ECONOMIC BLOWN POWDER PROCESS
Alexey Arnautov (National University of Science and Technology "MISiS")
- Author in 3D PRINTING OF «ALUMINUM - 10 -20 WT. % ALUMINA» COMPOSITES WITH CORE-SHELL PARTICLES AS RAW MATERIALS
Mikael Åsberg
- Author in INFLUENCE OF HEAT TREATMENT AND HIP ON PRECIPITATION HARDENING OF INTERMETALLIC-REINFORCED STAINLESS TOOL STEEL MANUFACTURED BY LASER POWDER BED FUSION
Nader Asnafi
- Author in 3D METAL PRINTING FROM AN INDUSTRIAL PERSPECTIVE - PRODUCT DESIGN, PRODUCTION AND BUSINESS MODELS
Lubos Baca
- Co-author in SURFACE ENGINEERING FOR PARTS MADE BY ADDITIVE MANUFACTURING
Ewald Badisch
- Co-author in SURFACE MULTIFUNCTIONALITY FOR ENHANCING FRICTION AND WEAR PERFORMANCE OF 3D PRINTED LIGHTWEIGHT COMPONENTS USING TECHNOLOGY HYBRIDS
Priyanshu Bajaj
- Author in PRECIPITATION KINETICS DURING NON-LINEAR HEAT TREATMENT IN LASER ADDITIVE MANUFACTURING
- Co-author in PROCESS AND ALLOY DESIGN FOR IN-SITU PRECIPITATION STRENGTHENING OF Al-Sc ALLOYS DURING LASER METAL DEPOSITION
Pere Barriobero-Vila
- Co-author in DESIGNING A NOVEL Fe-Ni-Al-Ti MARAGING STEEL TAILOR-MADE FOR LASER METAL DEPOSITION
Michael Berer (Polymer Competence Center Leoben GmbH)
- Co-author in ADDITIVE MANUFACTURING OF MICROLATTICE STRUCTURES AT THE RESOLUTION LIMIT OF THE SELECTIVE LASER MELTING PROCESS
Carola Birke
- Co-author in HOT ISOSTATIC PRESSING WITH INTEGRATED HEAT TREATMENT
Benedikt Blitz
- Author in THE WORLD MARKET FOR METAL POWDERS & STEELS, STATUS QUO AND OUTLOOK
Benoit Bonvoisin
- Co-author in SURFACE ENGINEERING FOR PARTS MADE BY ADDITIVE MANUFACTURING
Francis Briand
- Co-author in INFLUENCE OF VARIOUS GASES AND GAS MIXTURES DURING LASER BEAM MELTING
Christoph Broeckmann
- Co-author in FEASIBILITY INVESTIGATION FOR LASER POWDER BED FUSION OF HIGH-SPEED STEEL AISI M50 WITH BASE PLATE PREHEATING SYSTEM
- Co-author in HOT ISOSTATIC PRESSING WITH INTEGRATED HEAT TREATMENT
Bruno Buchmayr
- Author in RESULTS AND CONCLUSIONS ON METALLIC MATERIALS MADE BY AM WITHIN THE AUSTRIAN LEADER PROJECT "ADDMANU"
- Co-author in THE APPLICATION OF POWDER RHEOLOGY FOR AM POWDERS
Carlo Burkhardt
- Co-author in LITHOGRAPHY-BASED ADDITIVE MANUFACTURING OF FUNCTIONAL METAL COMPONENTS
Ricardo Henrique Buzolin
- Author in INFLUENCE OF INCLINATION ANGLE ON THE MICROSTRUCTURE AND ROUGHNESS OF DOWNSKIN OF 3D-PRINTED 316L POWDER
Santiago Cano
- Co-author in MATERIAL EXTRUSION WITH FILAMENTS FOR THE PRODUCTION OF METAL PARTS AND FEEDSTOCK THEREFORE
Philippe CASTANY
- Co-author in INFLUENCE OF POWDER CHARACTERISTICS ON FINAL PROPERTIES OF POWDER-BED LASER ADDITIVELY MANUFACTURED ODS Fe-14Cr STEEL
Coralie Charpentier
- Author in INFLUENCE OF VARIOUS GASES AND GAS MIXTURES DURING LASER BEAM MELTING
Mahdi chemkhi
- Author in EFFECT OF SURFACE MECHANICAL ATTRITION TREATMENT (SMAT) ON THE MECHANICAL PROPERTIES OF AISI 316L PROCESSED BY SELECTIVE LASER MELTING (SLM)
Jung-Wook Cho
- Co-author in EFFECT OF SHIELDING GAS FLOW RATE ON OXIDATION BEHAVIOR AND MECHANICAL PROPERTY IN LASER METAL DEPOSITION
Jean-Paul Collette
- Co-author in POST PROCESSING OF METAL PARTS MADE BY ADDITIVE MANUFACTURING
Philippe Courrier
- Co-author in MATERIAL PROPERTIES OF A LASER CLADDED AND HIP’ED AEROSPACE COMPONENT
Ingo Cremer
- Co-author in HOT ISOSTATIC PRESSING WITH INTEGRATED HEAT TREATMENT
Herbert Danninger
- Co-author in A NEW METHOD FOR DESCRIBING THE MORPHOLOGY OF POWDER LAYERS IN DIRECT LASER MELTING
Frederic De-Geuser
- Co-author in PRECIPITATION KINETICS DURING NON-LINEAR HEAT TREATMENT IN LASER ADDITIVE MANUFACTURING
Michel DEMESY
- Author in MICROSTRUCTURE, PASSIVITY AND CORROSION BEHAVIOUR OF 316L STAINLESS STEEL ELABORATED BY SELECTIVE LASER MELTING (SLM)
Yuanbin Deng
- Co-author in HOT ISOSTATIC PRESSING WITH INTEGRATED HEAT TREATMENT
Martina Dienstleder
- Co-author in MICROSTRUCTURE INVESTIGATION OF POWDERS FOR ADDITIVE MANUFACTURING
Hongbiao Dong
- Author in LASER ADDITIVE MANUFACTURING OF NIOBIUM SILICIDE-BASED HIGH TEMPERATURE MATERIALS
Michael Doppler
- Co-author in FILAMENT METAL PRINTING: SINTERED METAL PARTS BASED ON FFF WITH REINFORCED FEEDSTOCK
Andrew Douglas
- Co-author in LASER ADDITIVE MANUFACTURING OF NIOBIUM SILICIDE-BASED HIGH TEMPERATURE MATERIALS
Florin Duminica
- Co-author in POST PROCESSING OF METAL PARTS MADE BY ADDITIVE MANUFACTURING
Jan Džugan
- Author in FRACTURE BEHAVIOUR ASSESSMENT OF AM PROCESSED STEEL WITH THE USE OF MINIATURIZED SPECIMENS
Markus Effinger
- Co-author in INFLUENCE OF VARIOUS GASES AND GAS MIXTURES DURING LASER BEAM MELTING
Philip Emmerling
- Author in NEW PRODUCT SOLUTIONS BY USING WAAM AS A NEW TECHNOLOGY IN AM
DURIM EO
- Author in EFFECT OF SHIELDING GAS FLOW RATE ON OXIDATION BEHAVIOR AND MECHANICAL PROPERTY IN LASER METAL DEPOSITION
Simon Ewald
- Author in LASER POWDER BED FUSION OF ADVANCED HIGH STRENGTH STEELS - MODIFICATION OF DEFORMATION MECHANISMS BY INCREASING STACKING FAULT ENERGY
Aurélien FABAS
- Author in MICROSTRUCTURE, PASSIVITY AND CORROSION BEHAVIOUR OF 316L STAINLESS STEEL ELABORATED BY SELECTIVE LASER MELTING (SLM)
Lorenzo Fedrizzi
- Co-author in CORROSION BEHAVIOUR OF AM 316L STAINLESS STEEL
- Co-author in HIGH TEMPERATURE TRIBOLOGICAL BEHAVIOUR OF AISI 316L PRODUCED BY SLM TECHNIQUE.
Leandro Feitosa
- Co-author in LASER ADDITIVE MANUFACTURING OF NIOBIUM SILICIDE-BASED HIGH TEMPERATURE MATERIALS
Peter Felfer
- Co-author in MATERIAL EXTRUSION WITH FILAMENTS FOR THE PRODUCTION OF METAL PARTS AND FEEDSTOCK THEREFORE
Gunnel Fredriksson
- Author in INFLUENCE OF HEAT TREATMENT AND HIP ON PRECIPITATION HARDENING OF INTERMETALLIC-REINFORCED STAINLESS TOOL STEEL MANUFACTURED BY LASER POWDER BED FUSION
Teddy Gan
- Author in THERMOELECTRIC MAGNETOHYDRODYNAMICS IN ADDITIVE MANUFACTURING
Cedric Georges
- Co-author in POST PROCESSING OF METAL PARTS MADE BY ADDITIVE MANUFACTURING
Jochen Giedenbacher
- Author in INVESTIGATIONS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF GAS ATOMIZED HOT WORK TOOL STEELS MANUFACTURED BY SELECTIVE LASER MELTING USING POWDER BED PREHEATING.
Christian Gierl-Mayer
- Co-author in A NEW METHOD FOR DESCRIBING THE MORPHOLOGY OF POWDER LAYERS IN DIRECT LASER MELTING
- Co-author in LITHOGRAPHY-BASED ADDITIVE MANUFACTURING OF FUNCTIONAL METAL COMPONENTS
Pierre-François GIROUX
- Co-author in INFLUENCE OF POWDER CHARACTERISTICS ON FINAL PROPERTIES OF POWDER-BED LASER ADDITIVELY MANUFACTURED ODS Fe-14Cr STEEL
Joamin Gonzalez-Gutierrez
- Co-author in MATERIAL EXTRUSION WITH FILAMENTS FOR THE PRODUCTION OF METAL PARTS AND FEEDSTOCK THEREFORE
Richard Görgl
- Author in LASER METAL DEPOSITION (LMD) AS A COMPLEMENTARY TECHNOLOGY TO SELECTIVE LASER MELTING (SLM)
Michael Görtler
- Author in ADDITIVE MANUFACTURING OF MICROLATTICE STRUCTURES AT THE RESOLUTION LIMIT OF THE SELECTIVE LASER MELTING PROCESS
- Author in ADDITIVE MANUFACTURING OF NdFeB PERMANENT MAGNETS BY SELECTIVE LASER MELTING
Rudolf Gradinger
- Author in RECENT DEVELOPMENTS OF LIGHT ALLOY PRECURSOR MATERIAL FOR ADDITIVELY MANUFACTURED ULTRA-LIGHTWEIGHT PARTS
David Grech
- Co-author in XL MULTI-MATERIAL AM USING AN ECONOMIC BLOWN POWDER PROCESS
Alexander Gromov (National University of Science and Technology "MIsis")
- Author in 3D PRINTING OF «ALUMINUM - 10 -20 WT. % ALUMINA» COMPOSITES WITH CORE-SHELL PARTICLES AS RAW MATERIALS
Andreas Gruberbauer
- Author in INFLUENCE OF INCLINATION ANGLE ON THE MICROSTRUCTURE AND ROUGHNESS OF DOWNSKIN OF 3D-PRINTED 316L POWDER
Harald Gschiel
- Author in SURFACE ENGINEERING FOR PARTS MADE BY ADDITIVE MANUFACTURING
Ankit Gupta
- Co-author in PRECIPITATION KINETICS DURING NON-LINEAR HEAT TREATMENT IN LASER ADDITIVE MANUFACTURING
Stefan Hampel
- Co-author in MATERIAL EXTRUSION WITH FILAMENTS FOR THE PRODUCTION OF METAL PARTS AND FEEDSTOCK THEREFORE
Selma Hansal
- Co-author in SURFACE FINISHING FOR 3D-PRINTED METAL PARTS: FROM SUPPORT STRUCTURE REMOVAL TO CORROSION PROTECTION
Wolfgang Hansal
- Author in SURFACE FINISHING FOR 3D-PRINTED METAL PARTS: FROM SUPPORT STRUCTURE REMOVAL TO CORROSION PROTECTION
Markus Hatzenbichler
- Co-author in SURFACE ENGINEERING FOR PARTS MADE BY ADDITIVE MANUFACTURING
- Co-author in SURFACE MULTIFUNCTIONALITY FOR ENHANCING FRICTION AND WEAR PERFORMANCE OF 3D PRINTED LIGHTWEIGHT COMPONENTS USING TECHNOLOGY HYBRIDS
Josef Hodek
- Author in FRACTURE BEHAVIOUR ASSESSMENT OF AM PROCESSED STEEL WITH THE USE OF MINIATURIZED SPECIMENS
Dirk Hofmann
- Co-author in COMPARISON AND VALIDATION OF TOOLS FOR SIMULATION AIDED ADDITIVE MANUFACTURING
Christian Höller
- Author in INFLUENCE OF INCLINATION ANGLE ON THE MICROSTRUCTURE AND ROUGHNESS OF DOWNSKIN OF 3D-PRINTED 316L POWDER
Mads Holm
- Author in MATERIAL PROPERTIES OF A LASER CLADDED AND HIP’ED AEROSPACE COMPONENT
Stefan Holtzhausen
- Co-author in COMPARISON AND VALIDATION OF TOOLS FOR SIMULATION AIDED ADDITIVE MANUFACTURING
Clemens Holzer
- Co-author in MATERIAL EXTRUSION WITH FILAMENTS FOR THE PRODUCTION OF METAL PARTS AND FEEDSTOCK THEREFORE
Ming Hu
- Co-author in ON THE FORMATION OF PROCESS-INDUCED DEFECTS IN H13 TOOL STEEL PROCESSED BY LASER BEAM MELTING
Christian Huber
- Co-author in ADDITIVE MANUFACTURING OF NdFeB PERMANENT MAGNETS BY SELECTIVE LASER MELTING
Reinhard Hubmann
- Co-author in RESULTS AND CONCLUSIONS ON METALLIC MATERIALS MADE BY AM WITHIN THE AUSTRIAN LEADER PROJECT "ADDMANU"
Aziz Huskic
- Co-author in INVESTIGATIONS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF GAS ATOMIZED HOT WORK TOOL STEELS MANUFACTURED BY SELECTIVE LASER MELTING USING POWDER BED PREHEATING.
Eric Jaegle
- Co-author in DESIGNING A NOVEL Fe-Ni-Al-Ti MARAGING STEEL TAILOR-MADE FOR LASER METAL DEPOSITION
- Co-author in PRECIPITATION KINETICS DURING NON-LINEAR HEAT TREATMENT IN LASER ADDITIVE MANUFACTURING
- Co-author in PROCESS AND ALLOY DESIGN FOR IN-SITU PRECIPITATION STRENGTHENING OF Al-Sc ALLOYS DURING LASER METAL DEPOSITION
Lucas Jauer
- Co-author in FORMATION QUALITY, MECHANICAL PROPERTIES AND PROCESSING BEHAVIOR OF PURE ZINC (Zn) METAL PARTS PRODUCED BY LASERBASED MANUFACTURING FOR BIODEGRADABLE IMPLANTS
Markus Kaltenbrunner
- Co-author in FILAMENT METAL PRINTING: SINTERED METAL PARTS BASED ON FFF WITH REINFORCED FEEDSTOCK
Andrew Kao
- Author in THERMOELECTRIC MAGNETOHYDRODYNAMICS IN ADDITIVE MANUFACTURING
Marianne Kapp
- Co-author in ADVANCES IN MARAGING STEELS FOR ADDITIVE MANUFACTURING
Seshendra Karamchedu
- Co-author in ADVANCEMENTS IN METAL AM AND TOOLING APPLICATIONS – AN INSIGHT ON THE EFFECT OF POWDER QUALITY AND MATERIAL PROPERTIES
- Co-author in SURFACE MODIFICATION OF AM PRODUCED STAINLESS TOOL STEELS FOR PLASTIC MOULDING TOWARDS ENHANCED TRIBOLOGICAL PERFORMANCE AND CORROSION RESISTANCE
Christian Katsich
- Co-author in SURFACE MULTIFUNCTIONALITY FOR ENHANCING FRICTION AND WEAR PERFORMANCE OF 3D PRINTED LIGHTWEIGHT COMPONENTS USING TECHNOLOGY HYBRIDS
Michael Kitzmantel
- Author in FILAMENT METAL PRINTING: SINTERED METAL PARTS BASED ON FFF WITH REINFORCED FEEDSTOCK
- Co-author in PRELIMINARY STUDY OF THE PROCESSING PARAMETERS EFFECT ON THE MICROSTRUCTURE AND PROPERTIES OF TITANIUM GRADE 1 SPECIMENS FABRICATED VIA ADDITIVE MANUFACTURING
- Co-author in RESULTS AND CONCLUSIONS ON METALLIC MATERIALS MADE BY AM WITHIN THE AUSTRIAN LEADER PROJECT "ADDMANU"
- Co-author in XL MULTI-MATERIAL AM USING AN ECONOMIC BLOWN POWDER PROCESS
Marc Knauff
- Co-author in HOT ISOSTATIC PRESSING WITH INTEGRATED HEAT TREATMENT
Pavel Krakhmalev
- Author in INFLUENCE OF HEAT TREATMENT AND HIP ON PRECIPITATION HARDENING OF INTERMETALLIC-REINFORCED STAINLESS TOOL STEEL MANUFACTURED BY LASER POWDER BED FUSION
Christian Kukla
- Author in MATERIAL EXTRUSION WITH FILAMENTS FOR THE PRODUCTION OF METAL PARTS AND FEEDSTOCK THEREFORE
Johannes Kunz
- Co-author in FEASIBILITY INVESTIGATION FOR LASER POWDER BED FUSION OF HIGH-SPEED STEEL AISI M50 WITH BASE PLATE PREHEATING SYSTEM
Philipp Kürnsteiner
- Author in DESIGNING A NOVEL Fe-Ni-Al-Ti MARAGING STEEL TAILOR-MADE FOR LASER METAL DEPOSITION
- Author in PROCESS AND ALLOY DESIGN FOR IN-SITU PRECIPITATION STRENGTHENING OF Al-Sc ALLOYS DURING LASER METAL DEPOSITION
Alex Lanzutti
- Author in HIGH TEMPERATURE TRIBOLOGICAL BEHAVIOUR OF AISI 316L PRODUCED BY SLM TECHNIQUE.
- Co-author in CORROSION BEHAVIOUR OF AM 316L STAINLESS STEEL
Marcus Lartz
- Co-author in SURFACE MODIFICATION OF AM PRODUCED STAINLESS TOOL STEELS FOR PLASTIC MOULDING TOWARDS ENHANCED TRIBOLOGICAL PERFORMANCE AND CORROSION RESISTANCE
Harald Leitner
- Co-author in ADVANCES IN MARAGING STEELS FOR ADDITIVE MANUFACTURING
Wolfgang Lenz
- Co-author in HOT ISOSTATIC PRESSING WITH INTEGRATED HEAT TREATMENT
Fernando LOMELLO
- Co-author in INFLUENCE OF POWDER CHARACTERISTICS ON FINAL PROPERTIES OF POWDER-BED LASER ADDITIVELY MANUFACTURED ODS Fe-14Cr STEEL
Max Lutter-Günther
- Co-author in INVESTIGATION OF THE CORRELATION BETWEEN SIGNAL CHARACTERISTICS OF PHOTODIODE-BASED MELT POOL MONITORING AND PART QUALITY IN LASER-BASED POWDER BED FUSION OF ALSI10MG
Michele Magnan
- Co-author in CORROSION BEHAVIOUR OF AM 316L STAINLESS STEEL
- Co-author in HIGH TEMPERATURE TRIBOLOGICAL BEHAVIOUR OF AISI 316L PRODUCED BY SLM TECHNIQUE.
Julien Magnien
- Co-author in POST PROCESSING OF METAL PARTS MADE BY ADDITIVE MANUFACTURING
Guilio Maistro
- Co-author in INFLUENCE OF HEAT TREATMENT AND HIP ON PRECIPITATION HARDENING OF INTERMETALLIC-REINFORCED STAINLESS TOOL STEEL MANUFACTURED BY LASER POWDER BED FUSION
- Co-author in SURFACE MODIFICATION OF AM PRODUCED STAINLESS TOOL STEELS FOR PLASTIC MOULDING TOWARDS ENHANCED TRIBOLOGICAL PERFORMANCE AND CORROSION RESISTANCE
Anna Martin Vilardell
- Author in INFLUENCE OF HEAT TREATMENT AND HIP ON PRECIPITATION HARDENING OF INTERMETALLIC-REINFORCED STAINLESS TOOL STEEL MANUFACTURED BY LASER POWDER BED FUSION
Martin Mašek
- Author in FRACTURE BEHAVIOUR ASSESSMENT OF AM PROCESSED STEEL WITH THE USE OF MINIATURIZED SPECIMENS
Hicham MASKROT
- Co-author in INFLUENCE OF POWDER CHARACTERISTICS ON FINAL PROPERTIES OF POWDER-BED LASER ADDITIVELY MANUFACTURED ODS Fe-14Cr STEEL
Christian Masse
- Co-author in POST PROCESSING OF METAL PARTS MADE BY ADDITIVE MANUFACTURING
Taha Mattar
- Author in EVALUATING ADDITIVE MANUFACTURING TECHNIQUE TO PRODUCE DIES FOR HIGH-PRESSURE DIE CASTING
Anna Medvedeva
- Co-author in INFLUENCE OF HEAT TREATMENT AND HIP ON PRECIPITATION HARDENING OF INTERMETALLIC-REINFORCED STAINLESS TOOL STEEL MANUFACTURED BY LASER POWDER BED FUSION
Benjamin Meier
- Co-author in ADDITIVE MANUFACTURING OF NdFeB PERMANENT MAGNETS BY SELECTIVE LASER MELTING
John Meuthen
- Co-author in XL MULTI-MATERIAL AM USING AN ECONOMIC BLOWN POWDER PROCESS
Gerald Mitteramskogler
- Author in LITHOGRAPHY-BASED ADDITIVE MANUFACTURING OF FUNCTIONAL METAL COMPONENTS
Marco Mitterlehner
- Author in A NEW METHOD FOR DESCRIBING THE MORPHOLOGY OF POWDER LAYERS IN DIRECT LASER MELTING
Isabel Montealegre-Meléndez
- Author in PRELIMINARY STUDY OF THE PROCESSING PARAMETERS EFFECT ON THE MICROSTRUCTURE AND PROPERTIES OF TITANIUM GRADE 1 SPECIMENS FABRICATED VIA ADDITIVE MANUFACTURING
Frank Nachtigall
- Author in INDUSTRIAL SOLUTIONS FOR ADDITIVE MANUFACTURING
Farwah Nahif
- Co-author in SURFACE MODIFICATION OF AM PRODUCED STAINLESS TOOL STEELS FOR PLASTIC MOULDING TOWARDS ENHANCED TRIBOLOGICAL PERFORMANCE AND CORROSION RESISTANCE
Anton Nalivaiko (National University of Science and Technology "MISiS")
- Co-author in 3D PRINTING OF «ALUMINUM - 10 -20 WT. % ALUMINA» COMPOSITES WITH CORE-SHELL PARTICLES AS RAW MATERIALS
Erich Neubauer
- Author in XL MULTI-MATERIAL AM USING AN ECONOMIC BLOWN POWDER PROCESS
- Co-author in FILAMENT METAL PRINTING: SINTERED METAL PARTS BASED ON FFF WITH REINFORCED FEEDSTOCK
- Co-author in PRELIMINARY STUDY OF THE PROCESSING PARAMETERS EFFECT ON THE MICROSTRUCTURE AND PROPERTIES OF TITANIUM GRADE 1 SPECIMENS FABRICATED VIA ADDITIVE MANUFACTURING
Peter Tommy Nielsen
- Co-author in MATERIAL PROPERTIES OF A LASER CLADDED AND HIP’ED AEROSPACE COMPONENT
Thomas Niendorf
- Co-author in LASER BEAM MELTING OF H13 TOOL STEEL
- Co-author in ON THE FORMATION OF PROCESS-INDUCED DEFECTS IN H13 TOOL STEEL PROCESSED BY LASER BEAM MELTING
Manfred Ninaus
- Author in VALUE ENGINEERING FOR 3D METAL PRINTING AND BEST PRACTISE IN DESIGN & ENGINEERING
Moritz Nögel
- Co-author in COMPARISON AND VALIDATION OF TOOLS FOR SIMULATION AIDED ADDITIVE MANUFACTURING
Nicolas Nutal
- Author in POST PROCESSING OF METAL PARTS MADE BY ADDITIVE MANUFACTURING
Miloslav Ognianov
- Co-author in INVESTIGATIONS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF GAS ATOMIZED HOT WORK TOOL STEELS MANUFACTURED BY SELECTIVE LASER MELTING USING POWDER BED PREHEATING.
Christos Oikonomou
- Author in SURFACE MODIFICATION OF AM PRODUCED STAINLESS TOOL STEELS FOR PLASTIC MOULDING TOWARDS ENHANCED TRIBOLOGICAL PERFORMANCE AND CORROSION RESISTANCE
- Co-author in ADVANCEMENTS IN METAL AM AND TOOLING APPLICATIONS – AN INSIGHT ON THE EFFECT OF POWDER QUALITY AND MATERIAL PROPERTIES
- Co-author in INFLUENCE OF HEAT TREATMENT AND HIP ON PRECIPITATION HARDENING OF INTERMETALLIC-REINFORCED STAINLESS TOOL STEEL MANUFACTURED BY LASER POWDER BED FUSION
Laurent Pambaguian
- Co-author in POST PROCESSING OF METAL PARTS MADE BY ADDITIVE MANUFACTURING
Gerhard Panzl
- Author in THE APPLICATION OF POWDER RHEOLOGY FOR AM POWDERS
- Co-author in RESULTS AND CONCLUSIONS ON METALLIC MATERIALS MADE BY AM WITHIN THE AUSTRIAN LEADER PROJECT "ADDMANU"
Sun-Hong Park
- Co-author in EFFECT OF SHIELDING GAS FLOW RATE ON OXIDATION BEHAVIOR AND MECHANICAL PROPERTY IN LASER METAL DEPOSITION
Eva Maria Pérez-Soriano
- Co-author in PRELIMINARY STUDY OF THE PROCESSING PARAMETERS EFFECT ON THE MICROSTRUCTURE AND PROPERTIES OF TITANIUM GRADE 1 SPECIMENS FABRICATED VIA ADDITIVE MANUFACTURING
Koulis Pericleous
- Author in THERMOELECTRIC MAGNETOHYDRODYNAMICS IN ADDITIVE MANUFACTURING
Herbert Pfeifer
- Co-author in HOT ISOSTATIC PRESSING WITH INTEGRATED HEAT TREATMENT
Peter Pirklbauer
- Author in GENERATIVE DESIGN - NATURE AS BLUEPRINT
Reinhart Poprawe
- Author in DIGITAL PHOTONIC PRODUCTION ALONG THE LINES OF INDUSTRY 4.0
Quentin Portella
- Author in EFFECT OF SURFACE MECHANICAL ATTRITION TREATMENT (SMAT) ON THE MECHANICAL PROPERTIES OF AISI 316L PROCESSED BY SELECTIVE LASER MELTING (SLM)
Huan Qian
- Co-author in LASER ADDITIVE MANUFACTURING OF NIOBIUM SILICIDE-BASED HIGH TEMPERATURE MATERIALS
Dierk Raabe
- Co-author in DESIGNING A NOVEL Fe-Ni-Al-Ti MARAGING STEEL TAILOR-MADE FOR LASER METAL DEPOSITION
- Co-author in PRECIPITATION KINETICS DURING NON-LINEAR HEAT TREATMENT IN LASER ADDITIVE MANUFACTURING
- Co-author in PROCESS AND ALLOY DESIGN FOR IN-SITU PRECIPITATION STRENGTHENING OF Al-Sc ALLOYS DURING LASER METAL DEPOSITION
Ali Rajaei
- Co-author in HOT ISOSTATIC PRESSING WITH INTEGRATED HEAT TREATMENT
Gunther Reinhart
- Co-author in INVESTIGATION OF THE CORRELATION BETWEEN SIGNAL CHARACTERISTICS OF PHOTODIODE-BASED MELT POOL MONITORING AND PART QUALITY IN LASER-BASED POWDER BED FUSION OF ALSI10MG
delphine retraint
- Author in EFFECT OF SURFACE MECHANICAL ATTRITION TREATMENT (SMAT) ON THE MECHANICAL PROPERTIES OF AISI 316L PROCESSED BY SELECTIVE LASER MELTING (SLM)
Reynier Revilla
- Author in ANODIZING OF ADDITIVE MANUFACTURED ALUMINIUM ALLOYS: CHALLENGES
Sebastian Riehm
- Co-author in HOT ISOSTATIC PRESSING WITH INTEGRATED HEAT TREATMENT
Lucas Robert
- Co-author in POST PROCESSING OF METAL PARTS MADE BY ADDITIVE MANUFACTURING
Manel Rodriguez Ripoll
- Author in SURFACE MULTIFUNCTIONALITY FOR ENHANCING FRICTION AND WEAR PERFORMANCE OF 3D PRINTED LIGHTWEIGHT COMPONENTS USING TECHNOLOGY HYBRIDS
Claudia Rosenkranz
- Author in INVESTIGATION OF THE CORRELATION BETWEEN SIGNAL CHARACTERISTICS OF PHOTODIODE-BASED MELT POOL MONITORING AND PART QUALITY IN LASER-BASED POWDER BED FUSION OF ALSI10MG
Jasmin Saewe
- Author in FEASIBILITY INVESTIGATION FOR LASER POWDER BED FUSION OF HIGH-SPEED STEEL AISI M50 WITH BASE PLATE PREHEATING SYSTEM
Gabriela Sandulache
- Co-author in SURFACE FINISHING FOR 3D-PRINTED METAL PARTS: FROM SUPPORT STRUCTURE REMOVAL TO CORROSION PROTECTION
Max Schaukellis (Digital Additive Production (DAP), RWTH Aachen University)
- Co-author in FORMATION QUALITY, MECHANICAL PROPERTIES AND PROCESSING BEHAVIOR OF PURE ZINC (Zn) METAL PARTS PRODUCED BY LASERBASED MANUFACTURING FOR BIODEGRADABLE IMPLANTS
Michael Scheerer
- Co-author in SURFACE ENGINEERING FOR PARTS MADE BY ADDITIVE MANUFACTURING
Johannes Henrich Schleifenbaum (Digital Additive Production (DAP), RWTH Aachen University, Steinbachstraße 15, 52074 Aachen, Germany)
- Co-author in FORMATION QUALITY, MECHANICAL PROPERTIES AND PROCESSING BEHAVIOR OF PURE ZINC (Zn) METAL PARTS PRODUCED BY LASERBASED MANUFACTURING FOR BIODEGRADABLE IMPLANTS
Johannes Henrich Schleifenbaum
- Co-author in FEASIBILITY INVESTIGATION FOR LASER POWDER BED FUSION OF HIGH-SPEED STEEL AISI M50 WITH BASE PLATE PREHEATING SYSTEM
Simon Schmid
- Author in INVESTIGATION OF THE CORRELATION BETWEEN SIGNAL CHARACTERISTICS OF PHOTODIODE-BASED MELT POOL MONITORING AND PART QUALITY IN LASER-BASED POWDER BED FUSION OF ALSI10MG
Stephan Schuschnigg
- Co-author in MATERIAL EXTRUSION WITH FILAMENTS FOR THE PRODUCTION OF METAL PARTS AND FEEDSTOCK THEREFORE
Martin Schwentenwein
- Co-author in LITHOGRAPHY-BASED ADDITIVE MANUFACTURING OF FUNCTIONAL METAL COMPONENTS
Stefan Seidel
- Author in CHALLENGES OF ADDITIVE MANUFACTURING IN HIGH PERFORMANCE MARKETS
Christian Seidel
- Co-author in INVESTIGATION OF THE CORRELATION BETWEEN SIGNAL CHARACTERISTICS OF PHOTODIODE-BASED MELT POOL MONITORING AND PART QUALITY IN LASER-BASED POWDER BED FUSION OF ALSI10MG
Philipp Sembdner
- Author in COMPARISON AND VALIDATION OF TOOLS FOR SIMULATION AIDED ADDITIVE MANUFACTURING
Johnny Sjöström
- Author in ADVANCEMENTS IN METAL AM AND TOOLING APPLICATIONS – AN INSIGHT ON THE EFFECT OF POWDER QUALITY AND MATERIAL PROPERTIES
- Co-author in SURFACE MODIFICATION OF AM PRODUCED STAINLESS TOOL STEELS FOR PLASTIC MOULDING TOWARDS ENHANCED TRIBOLOGICAL PERFORMANCE AND CORROSION RESISTANCE
Mateusz Skalon
- Author in INFLUENCE OF INCLINATION ANGLE ON THE MICROSTRUCTURE AND ROUGHNESS OF DOWNSKIN OF 3D-PRINTED 316L POWDER
Anna SOBOLEWSKA
- Author in MICROSTRUCTURE, PASSIVITY AND CORROSION BEHAVIOUR OF 316L STAINLESS STEEL ELABORATED BY SELECTIVE LASER MELTING (SLM)
Christof Sommitsch
- Author in INFLUENCE OF INCLINATION ANGLE ON THE MICROSTRUCTURE AND ROUGHNESS OF DOWNSKIN OF 3D-PRINTED 316L POWDER
- Co-author in INVESTIGATIONS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF GAS ATOMIZED HOT WORK TOOL STEELS MANUFACTURED BY SELECTIVE LASER MELTING USING POWDER BED PREHEATING.
Marco Sortino
- Co-author in CORROSION BEHAVIOUR OF AM 316L STAINLESS STEEL
Marco Sortino
- Co-author in HIGH TEMPERATURE TRIBOLOGICAL BEHAVIOUR OF AISI 316L PRODUCED BY SLM TECHNIQUE.
Jurgen Stampfl
- Author in ADDITIVE MANUFACTURING FOR DIGITAL DENTISTRY
Leuders Stefan
- Co-author in LASER BEAM MELTING OF H13 TOOL STEEL
- Co-author in ON THE FORMATION OF PROCESS-INDUCED DEFECTS IN H13 TOOL STEEL PROCESSED BY LASER BEAM MELTING
Nils Stelzer
- Co-author in SURFACE ENGINEERING FOR PARTS MADE BY ADDITIVE MANUFACTURING
Ralph Stelzer
- Co-author in COMPARISON AND VALIDATION OF TOOLS FOR SIMULATION AIDED ADDITIVE MANUFACTURING
Stéphanie THIEBAUT
- Author in MICROSTRUCTURE, PASSIVITY AND CORROSION BEHAVIOUR OF 316L STAINLESS STEEL ELABORATED BY SELECTIVE LASER MELTING (SLM)
Stephanie Thie (Bohrt) (Department of Industrial Furnaces and Heat Engineering of RWTH Aachen University)
- Author in HOT ISOSTATIC PRESSING WITH INTEGRATED HEAT TREATMENT
Giovanni Totis
- Co-author in CORROSION BEHAVIOUR OF AM 316L STAINLESS STEEL
- Co-author in HIGH TEMPERATURE TRIBOLOGICAL BEHAVIOUR OF AISI 316L PRODUCED BY SLM TECHNIQUE.
Eliza Truszkiewicz (Polymer Competence Center Leoben GmbH)
- Co-author in ADDITIVE MANUFACTURING OF MICROLATTICE STRUCTURES AT THE RESOLUTION LIMIT OF THE SELECTIVE LASER MELTING PROCESS
Emanuele Vaglio
- Co-author in CORROSION BEHAVIOUR OF AM 316L STAINLESS STEEL
- Co-author in HIGH TEMPERATURE TRIBOLOGICAL BEHAVIOUR OF AISI 316L PRODUCED BY SLM TECHNIQUE.
Jean-Francois Vanhumbeeck
- Co-author in POST PROCESSING OF METAL PARTS MADE BY ADDITIVE MANUFACTURING
Elodie VASQUEZ
- Author in INFLUENCE OF POWDER CHARACTERISTICS ON FINAL PROPERTIES OF POWDER-BED LASER ADDITIVELY MANUFACTURED ODS Fe-14Cr STEEL
Vincent VIGNAL
- Author in MICROSTRUCTURE, PASSIVITY AND CORROSION BEHAVIOUR OF 316L STAINLESS STEEL ELABORATED BY SELECTIVE LASER MELTING (SLM)
Mikhail Vlaskin (Joint Institute of High-Temperature, Russian Academy of Science)
- Co-author in 3D PRINTING OF «ALUMINUM - 10 -20 WT. % ALUMINA» COMPOSITES WITH CORE-SHELL PARTICLES AS RAW MATERIALS
Christophe Voltz
- Author in MICROSTRUCTURE, PASSIVITY AND CORROSION BEHAVIOUR OF 316L STAINLESS STEEL ELABORATED BY SELECTIVE LASER MELTING (SLM)
Maximilian Voshage
- Author in FORMATION QUALITY, MECHANICAL PROPERTIES AND PROCESSING BEHAVIOR OF PURE ZINC (Zn) METAL PARTS PRODUCED BY LASERBASED MANUFACTURING FOR BIODEGRADABLE IMPLANTS
Wolfgang Waldhauser (Joanneum Research Forschungsgesellschaft mbH)
- Co-author in ADDITIVE MANUFACTURING OF MICROLATTICE STRUCTURES AT THE RESOLUTION LIMIT OF THE SELECTIVE LASER MELTING PROCESS
Christopher Wallis
- Co-author in RESULTS AND CONCLUSIONS ON METALLIC MATERIALS MADE BY AM WITHIN THE AUSTRIAN LEADER PROJECT "ADDMANU"
Stefan Wallner
- Author in POWDER PRODUCTION TECHNOLOGIES
Alexander Walzl
- Co-author in RESULTS AND CONCLUSIONS ON METALLIC MATERIALS MADE BY AM WITHIN THE AUSTRIAN LEADER PROJECT "ADDMANU"
Andreas Weisheit
- Co-author in DESIGNING A NOVEL Fe-Ni-Al-Ti MARAGING STEEL TAILOR-MADE FOR LASER METAL DEPOSITION
- Co-author in PROCESS AND ALLOY DESIGN FOR IN-SITU PRECIPITATION STRENGTHENING OF Al-Sc ALLOYS DURING LASER METAL DEPOSITION
Peng Wen
- Author in FORMATION QUALITY, MECHANICAL PROPERTIES AND PROCESSING BEHAVIOR OF PURE ZINC (Zn) METAL PARTS PRODUCED BY LASERBASED MANUFACTURING FOR BIODEGRADABLE IMPLANTS
Markus Benjamin Wilms
- Co-author in DESIGNING A NOVEL Fe-Ni-Al-Ti MARAGING STEEL TAILOR-MADE FOR LASER METAL DEPOSITION
- Co-author in PRECIPITATION KINETICS DURING NON-LINEAR HEAT TREATMENT IN LASER ADDITIVE MANUFACTURING
- Co-author in PROCESS AND ALLOY DESIGN FOR IN-SITU PRECIPITATION STRENGTHENING OF Al-Sc ALLOYS DURING LASER METAL DEPOSITION
Gridin Witalij
- Co-author in LASER BEAM MELTING OF H13 TOOL STEEL
- Co-author in ON THE FORMATION OF PROCESS-INDUCED DEFECTS IN H13 TOOL STEEL PROCESSED BY LASER BEAM MELTING
Liang Wu
- Author in LASER BEAM MELTING OF H13 TOOL STEEL
- Co-author in ON THE FORMATION OF PROCESS-INDUCED DEFECTS IN H13 TOOL STEEL PROCESSED BY LASER BEAM MELTING
Fengchen Xia
- Co-author in LASER BEAM MELTING OF H13 TOOL STEEL
Fengchen Xia
- Author in ON THE FORMATION OF PROCESS-INDUCED DEFECTS IN H13 TOOL STEEL PROCESSED BY LASER BEAM MELTING
Sergey Zmanovsky (SUAL PM)
- Co-author in 3D PRINTING OF «ALUMINUM - 10 -20 WT. % ALUMINA» COMPOSITES WITH CORE-SHELL PARTICLES AS RAW MATERIALS
Horst Zunko
- Author in ADVANCES IN MARAGING STEELS FOR ADDITIVE MANUFACTURING