Go to the Indico Home Page Oldest event Older event Up to category Newer event Newest event
  • Indico style
  • Indico style - inline minutes
  • Indico style - numbered
  • Indico style - numbered + minutes
  • Indico Weeks View
    • Switch to the management area of this event
    Login

    Metal Additive Manufacturing Conference 2018

    21–23 Nov 2018
    Wirtschaftskammer Österreich
    Europe/Vienna timezone
    Registration is closed!

    Support

    Session

    Postprocessing (II)

    23 Nov 2018, 11:00
    Julius Raab Saal (Wirtschaftskammer Österreich)

    Julius Raab Saal

    Wirtschaftskammer Österreich

    Wiedner Hauptstraße 63 1045 Vienna, Austria

    Conveners

    Postprocessing (II)

    • Michael Kitzmantel (RHP-Technology GmbH)

    Presentation materials

    There are no materials yet.

    1. 11. SURFACE ENGINEERING FOR PARTS MADE BY ADDITIVE MANUFACTURING
      Mr Markus Hatzenbichler (FOTEC)
      23/11/2018, 11:00
      Postprocessing
      Oral Presentation
      It is commonly known that the additive manufacturing (AM) technology provides various advantages, such as the production of highly complex (bionic) structures that cannot be realized conventionally, the unused raw material can be recycled and no specific tools are needed. On the economical side, also the lead time saving must be taken into account. Within this project, the surface roughness of...
      Go to contribution page
    2. 34. EFFECT OF SURFACE MECHANICAL ATTRITION TREATMENT (SMAT) ON THE MECHANICAL PROPERTIES OF AISI 316L PROCESSED BY SELECTIVE LASER MELTING (SLM)
      Mr Quentin Portella (ICD-LASMIS/University of Technology of Troyes)
      23/11/2018, 11:20
      Postprocessing
      Oral Presentation
      Selective Laser Melting (SLM) is a metal additive manufacturing process widely used in industry for its extraordinary versatility to geometry and minimum waste of material. Mechanical properties of SLM objects depend strongly on the process parameters such as power, scanning speed, hatch space and scanning strategy. Working on these latter parameters, the material can be porous or...
      Go to contribution page
    3. 45. HOT ISOSTATIC PRESSING WITH INTEGRATED HEAT TREATMENT
      Ms Stephanie Thie (Bohrt) (Department of Industrial Furnaces and Heat Engineering of RWTH Aachen University)
      23/11/2018, 11:40
      Postprocessing
      Oral Presentation
      Producing additive manufactured parts often includes post processing in a hot-isostatic press (HIP) and heat treatment. This process usually requires a long cooling and reheating time, which results in a long occupancy of the machinery with a high energy consumption. To reduce the required time and costs, a new process has been designed to reduce the process time and increase the operational...
      Go to contribution page
    Building timetable...