Go to the Indico Home Page Oldest event Older event Up to category Newer event Newest event
  • Indico style
  • Indico style - inline minutes
  • Indico style - numbered
  • Indico style - numbered + minutes
  • Indico Weeks View
    • Switch to the management area of this event
    Login

    Metal Additive Manufacturing Conference 2018

    21–23 Nov 2018
    Wirtschaftskammer Österreich
    Europe/Vienna timezone
    Registration is closed!

    Support

    Session

    Known Materials & Characteristics (III)

    22 Nov 2018, 11:20
    Julius Raab Saal (Wirtschaftskammer Österreich)

    Julius Raab Saal

    Wirtschaftskammer Österreich

    Wiedner Hauptstraße 63 1045 Vienna, Austria

    Conveners

    Known Materials & Characteristics (III)

    • Vincent VIGNAL (ICB, CNRS-Univ de Bourgogne)

    Presentation materials

    There are no materials yet.

    1. 51. ON THE FORMATION OF PROCESS-INDUCED DEFECTS IN H13 TOOL STEEL PROCESSED BY LASER BEAM MELTING
      Mr Fengchen Xia (voestalpine additive manufacturing center)
      22/11/2018, 11:20
      Known Materials & Characteristics
      Oral Presentation
      The tool and die industry is one of the most promising markets for Additive Manufacturing, even if there is still a lack of suitable materials. For conventional process routes, H13 tool steel is a well-established material due to its high thermo-fatigue and crack resistance, especially for applications in the high pressure die casting industry. Due to this situation, H13 is a promising...
      Go to contribution page
    2. 44. FEASIBILITY INVESTIGATION FOR LASER POWDER BED FUSION OF HIGH-SPEED STEEL AISI M50 WITH BASE PLATE PREHEATING SYSTEM
      Ms Jasmin Saewe (Fraunhofer Institute for Laser Technology (ILT), Aachen)
      22/11/2018, 11:40
      Known Materials & Characteristics
      Oral Presentation
      Laser-powder bed fusion (L-PBF) is an additive manufacturing process which is used in aerospace, automotive and medical applications. In these areas nickel, aluminum and titanium based alloys are already entrenched. For mechanical engineering industry only few steels are qualified for the L-PBF process which are mostly hot work tool steels with less than 0.5 wt.-% carbon content. Many...
      Go to contribution page
    3. 27. LASER BEAM MELTING OF H13 TOOL STEEL
      Mr Liang Wu (voestalpine Additive Manufacturing Center GmbH)
      22/11/2018, 12:00
      Known Materials & Characteristics
      Oral Presentation
      H13, a type of multifunctional chromium-molybdenum carbon steel, is widely used in hot work applications. However, when applied in additive manufacturing processes, H13 suffers from process-induced defects. Thus, processing requires appropriate parameters in Laser beam melting (LBM). Based on a comprehensive parameter investigation robust LBM parameters were found. H13 can be processed...
      Go to contribution page
    Building timetable...