Go to the Indico Home Page Oldest event Older event Up to category Newer event Newest event
  • Indico style
  • Indico style - inline minutes
  • Indico style - numbered
  • Indico style - numbered + minutes
  • Indico Weeks View
    • Switch to the management area of this event
    Login

    5th International Conference on Advances in Solidification Processes (ICASP-5) 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR-5)

    17–21 Jun 2019
    IMLAUER HOTEL PITTER SALZBURG
    Europe/Vienna timezone

    Support

    Session

    Continuous casting

    18 Jun 2019, 13:30
    IMLAUER HOTEL PITTER SALZBURG

    IMLAUER HOTEL PITTER SALZBURG

    Rainerstraße 6, 5020 Salzburg, Austria

    Presentation materials

    There are no materials yet.

    1. 219. EVALUATION OF AHSS CONCEPTS WITH A FOCUS ON THE PRODUCT PROPERTIES AND APPROPRIATE CASTING CHARACTERISTICS OF ARVEDI ESP THIN SLAB CASTERS
      Christian Bernhard (Montanuniversitaet Leoben)
      18/06/2019, 13:30
      Keynote
      The Arvedi ESP process and a variety of produced materials have been continuously developed since the opening of the Arvedi ESP plant in Cremona in 2009 to meet market demands for more sophisticated steel grades. The development of grades for more advanced applications such as advanced high strength steels and multiphase grades is of interest. Dual phase grades such as DP600 are already...
      Go to contribution page
    2. 216. INNOVATIONS AND IMPLICATIONS OF NEAR NET SHAPE CASTING ON THE MICROSTRUCTURE OF MODERN STEELS
      Carl Slater (University of Warwick)
      18/06/2019, 14:00
      Oral Presentation
      Belt casting as a technology has been suggested as a potential casting method for steels for decades. However it has been hindered by technological capabilities and investment. The potential draw of > 3GJ/tonne reduction in energy this process has on conventional continuous casting has meant that this technology has always shown great potential. With recent improvements and the active mill in...
      Go to contribution page
    3. 228. SOLIDIFYING SHELL WAVINESS DURING CONTINUOUS CASTING OF AHSS SLABS
      Hongbin Yin (ArcelorMittal Global R&D)
      18/06/2019, 14:20
      Oral Presentation
      Transverse cracking of continuously cast products has been encountered at almost every caster operation. Enormous efforts have been carried out in the past aiming at identifying the cause and reducing the problem, especially on steel grades with peritectic chemistries. So far, however, there is still no cost-effective solution with good trade-off for internal quality and productivity. In this...
      Go to contribution page
    4. 82. A NOVEL POWDER METALLURGY TECHNIQUE FOR INTRODUCING SYNTHETIC INCLUSIONS INTO LIQUID STEEL
      Andrew Smith (Materials Processing INstitute)
      18/06/2019, 14:40
      Oral Presentation
      Previous studies have shown that it is extremely problematic to add synthetic inclusions successfully into liquid steel for clean steel experiments. Small micro-particles encapsulated in a metallic parcel are difficult to pass through the melt-gas interface and inclusions tend to agglomerate then float up to the liquid surface. In this study, powder metallurgy is used to distribute cerium...
      Go to contribution page
    5. 23. DENDRITE GROWTH DIRECTION MEASUREMENTS: UNDERSTANDING THE SOLUTE ADVANCEMENT IN CONTINUOUS CASTING OF STEEL
      ARUNAVA SENGUPTA (Warwick Manufacturing Group, University of Warwick, UK)
      18/06/2019, 15:00
      Oral Presentation
      Maintaining competitiveness in steel manufacturing requires improving process efficiency and production volume whilst enhancing product quality and performance. This is particularly challenging for producing value-added advanced steel grades such as advanced high strength steels and electrical steels. These grades due to higher weight percentage of alloying elements cause difficulties in...
      Go to contribution page
    6. 256. PROGRESS ON SURFACE QUALITY CONTROL BY INSPECTION AND ADVANCED NUMERICAL MODELLING DURING CONTINUOUS CASTING OF STAINLESS STEEL SLABS
      Pavel E. Ramirez Lopez (SWERIM AB)
      18/06/2019, 15:20
      Oral Presentation
      The ongoing RFCS project SUPPORT-CAST is aimed at finding optimal casting parameters and cooling rates to improve product quality based on high-resolution visualization topography scanning in combination with advanced numerical modelling. Surface scanning is performed by a blue laser sensor adapted to withstand temperatures up to 1200°C and capable of resolutions up to 30 microns. This enables...
      Go to contribution page
    Building timetable...