Name: 5th International Conference on Advances in Solidification Processes (ICASP-5) 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR-5)
Start: 2019-06-17T08:00:00+02:00
End: 2019-06-21T18:00:00+02:00
Location: IMLAUER HOTEL PITTER SALZBURG

5th International Conference on Advances in Solidification Processes (ICASP-5) 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR-5)

from Monday, 17 June 2019 (08:00) to Friday, 21 June 2019 (18:00)

Monday, 17 June 2019

17:50 Registration & Fingerfood
Registration & Fingerfood
17:50 - 20:50
Tuesday, 18 June 2019

07:30 Registration & Welcome
Registration & Welcome
07:30 - 08:50
08:50 Plenary Session
08:50 - 10:00
Room: P1
Contributions

08:50 STEPS IN BUILDING THE FOUNDATIONS OF MODERN SOLIDIFICATION SCIENCE BEFORE 1953 - Wilfried Kurz (EPFL, Lausanne, Switzerland)

09:25 BRIDGING THE GAP BETWEEN ATOMISTIC AND MICROSTRUCTURE-SCALE SIMULATIONS OF SOLIDIFICATION: FROM A PERSPECTIVE OF LARGE-SCALE MOLECULAR DYNAMICS SIMULATION - Yasushi Shibuta (The University of Tokyo)
10:00 Break
Break
10:00 - 10:30
10:30 Liquid metal processing
10:30 - 12:10
Room: Auersperg 2
Contributions

10:30 EFFECT OF DIFFERENT PROCESS PARAMETERS ON NON-METALLIC INCLUSIONS DURING ELECTO-SLAG REMELTING OF A TEMPERING STEEL - Reinhold Schneider (Univ. of Appl. Sciences Upper Austria)

10:50 A STUDY OF THE MASS TRANSFER KINETICS DURING THE DISSOLUTION OF Ti-N PARTICLES IN LIQUID TITANIUM - Steven Cockcroft (University of British Columbia)

11:10 INFLUENCE OF SIDE ARCS ON THE SOLIDIFICATION OF A VAR INGOT - Ebrahim Karimi Sibaki (Montanuniversitaet)

11:30 NUMERICAL SIMULATIONS OF LIQUID STEEL ALLOYING IN THE THREE STRAND CONTINUOUS CASTING BLOOM TUNDISH - Adam Cwudzinski (Czestochowa University of Technology)

11:50 INVESTIGATION ON BAND SEGREGATE FORMATION DURING THE ELECTROSLAG REMELTING OF H13 DIE STEEL - Qiang Wang (Wuhan University of Science and Technology and Delft University of Technology)
Nucleation and grain refinement: #1
#1
10:30 - 12:10
Room: P1
Contributions

10:30 RECENT ADVANCES IN UNDERSTANDING THE EARLY STAGES OF SOLIDIFICATION - Zhongyun Fan (BCAST, Brunel University London)

10:50 ELEMENTAL ADSORPTION AT THE LIQUID/OXIDE INTERFACE IN ALUMINIUM ALLOYS - Feng Wang (BCAST, Brunel University London)

11:10 GRAIN REFINEMENTS OF MAGNESIUM ALLOYS INOCULATED BY ADDITIONS OF EXTERNAL SiC PARTICLES - Yuanding Huang (MagIC Magnesium Innovation Centre, Helmholtz-Zentrum Geesthacht)

11:30 GRAIN INITIATION BEHAVIOUR AND ITS EFFECT ON GRAIN REFINEMENT - Feng Gao (BCAST, Brunel Univerisity)

11:50 INCREASING THE LIQUIDUS TEMPERATURE BY EMPLOYING THE CONTROLLED DIFFUSION SOLIDIFICATION (CDS) PROCESS: A POTENTIAL ROUTE TO IMPROVED CASTINGS - Alberto Fabrizi (University of Padova)
Dendritic microstructure: Characterization
Characterization
10:30 - 12:10
Room: P4
Contributions

10:30 DIRECT OBSERVATION OF DENDRITE FRAGMENTATION IN THE SOLIDIFICATION OF UNDERCOOLED MELTS - Andrew Mullis (University of Leeds)

10:50 STUDY OF NUCLEATION AND GROWTH IN RAPIDLY SOLIDIFYING Al-Ni ALLOYS - Marcus Reinartz (Friedrich-Schiller-Universität Jena)

11:10 PRIMARY DENDRITE TRUNK DIAMETER IN Al-7wt% ALLOY DIRECTIONALLY SOLIDIFIED ABOARD THE INTERNATIONAL SPACE STATION - Surendra Tewari (Cleveland State University)

11:30 FORMATION CONDITION AND PATTERN EVOLUTION OF TWINNED DENDRITES IN Al-4.5%Cu ALLOY DURING BRIDGMAN SOLIDIFICATION - Shuangming Li (Northwestern Polytechnical University)

11:50 SOLIDIFICATION BEHAVIOUR OF HYPOEUTECTIC QUATERNARY Al-Cu-Si-Mg BASED HPDC ALLOYS - Qing Cai (BCAST)
12:10 Lunch
Lunch
12:10 - 13:30
13:30 Continuous casting
13:30 - 15:40
Room: Auersperg 2
Contributions

13:30 EVALUATION OF AHSS CONCEPTS WITH A FOCUS ON THE PRODUCT PROPERTIES AND APPROPRIATE CASTING CHARACTERISTICS OF ARVEDI ESP THIN SLAB CASTERS - Christian Bernhard (Montanuniversitaet Leoben)

14:00 INNOVATIONS AND IMPLICATIONS OF NEAR NET SHAPE CASTING ON THE MICROSTRUCTURE OF MODERN STEELS - Carl Slater (University of Warwick)

14:20 SOLIDIFYING SHELL WAVINESS DURING CONTINUOUS CASTING OF AHSS SLABS - Hongbin Yin (ArcelorMittal Global R&D)

14:40 A NOVEL POWDER METALLURGY TECHNIQUE FOR INTRODUCING SYNTHETIC INCLUSIONS INTO LIQUID STEEL - Andrew Smith (Materials Processing INstitute)

15:00 DENDRITE GROWTH DIRECTION MEASUREMENTS: UNDERSTANDING THE SOLUTE ADVANCEMENT IN CONTINUOUS CASTING OF STEEL - ARUNAVA SENGUPTA (Warwick Manufacturing Group, University of Warwick, UK)

15:20 PROGRESS ON SURFACE QUALITY CONTROL BY INSPECTION AND ADVANCED NUMERICAL MODELLING DURING CONTINUOUS CASTING OF STAINLESS STEEL SLABS - Pavel E. Ramirez Lopez (SWERIM AB)
Nucleation and grain refinement: #2
#2
13:30 - 15:40
Room: P1
Contributions

13:30 THE INFLUENCE OF SHORT-RANGE ORDER IN THE LIQUID ON SOLIDIFICATION MORPHOLOGIES - Michel Rappaz (École Polytechnique Fédérale de Lausanne)

14:00 INFLUENCE OF MINOR ADDITIONS ON ICOSAHEDRAL SHORT-RANGE ORDER (ISRO) AND ITS CONSEQUENCES ON NUCLEATION AND SOLIDIFICATION GROWTH KINETICS IN FCC ALLOYS - Julien Zollinger (Institut Jean Lamour)

14:20 Si POISONING OF TiB2 BASED GRAIN REFINERS FOR Al-ALLOYS - Yun Wang (BCAST, Brunel University London)

14:40 PHASE FIELD CRYSTAL AND MOLECULAR DYNAMIC MODELING OF NUCLEATION DURING SOLIDIFICATION ON THE ATOMIC SCALE - Jincheng Wang (Northwestern Polytechnical University)

15:00 PRENUCLEATION ON OXIDE PARTICLES IN Al- AND Mg-ALLOYS FROM AB INITIO MOLECULAR DYNAMICS SIMULATIONS - Changming Fang (BCAST Brunel University London)

15:20 HETEROGENEOUS NUCLEATION BY STRUCTURAL TEMPLATING - Hua Men (BCAST, Brunel University London)
Dendritic microstructure: In situ experiments
In situ experiments
13:30 - 15:40
Room: P4
Contributions

13:30 VISUALISATION OF MELT FLOW EFFECTS ON DENDRITIC SOLIDIFICATION - Natalia Shevchenko (Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany)

14:00 IN SITU STUDIES OF NATURAL CONVECTION DURING SOLIDIFICATION OF TERNARY MIXTURES - Virkeshwar Kumar (Indian Institute of Technology Bombay)

14:20 TIME-RESOLVED X-RAY TOMOGRAPHY STUDIES OF DENDRITIC EVOLUTION IN Al-Cu ALLOYS - Kate Elder (Northwestern University)

14:40 3D PATTERN EVOLUTION DURING DIRECTIONAL SOLIDIFICATION OF A TRANSPARENT ALLOY CONDUCTED ON DECLIC-DSI - Fatima Mota (IM2NP UMR CNRS 7334)

15:00 MICROSTRUCTURE EVOLUTION OF AN Al-Cu ALLOY IN THIN-SAMPLE POLYCRYSTALLINE SOLIDIFICATION: IN SITU SYNCHROTON X-RAY RADIOGRAPHY IMAGING AND FULL-SCALE PHASE-FIELD SIMULATIONS - Tong Zhao Gong (Institute of Metal Research, Chinese Academy of Sciences)
15:40 Break
Break
15:40 - 16:10
16:10 Solidification processing
16:10 - 17:50
Room: Auersperg 2
Contributions

16:10 ADVANCED SOLIDIFICATION MODELS FOR THE SIMULATION OF MECHANICAL BONDING IN HYBRID LIGHT METAL STRUCTURES PRODUCED BY HIGH PRESSURE DIE CASTING - Juergen Jakumeit (Access e.V.)

16:30 EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE EFFECTS OF FILLING DYNAMICS IN LOW PRESSURE SAND CASTING - Marie Bedel (MSMP Laboratory)

16:50 OPTIMIZATION OF ULTRASONIC CAVITATION PROCESSING IN THE LIQUID MELT FLOW - Tungky Subroto (Brunel University London)

17:10 MICROSTRUCTURE EVOLUTION IN AN Al-Si PISTON ALLOY UNDER ULTRASONIC MELT PROCESSING - Suwaree Chankitmunkong (King Mongkut's University of Technology Thonburi)

17:30 FORMATION OF MICRO-PLUMES AT A PLANAR SOLID/LIQUID INTERFACE IN A TEMPERATURE GRADIENT - Johann Peter Mogeritsch (Montanuniversitaet Leoben)
Nucleation and grain refinement: #3
#3
16:10 - 17:50
Room: P1
Contributions

16:10 REVEALING THE TEMPERATURE GRADIENT INFLUENCE ON THE HETEROGENEOUS NUCLEATION BEHAVIOR OF GRAINS IN INOCULATED Al ALLOYS - Lars Arnberg (Department of Materials Science and Engineering, NTNUTNU) Yanjun Li (Department of Materials Science and Engineering, NTNUTNU)

16:30 NUMERICAL SIMULATION OF WAVE-LIKE NUCLEATION EVENTS - David StJohn (The University of Queensland)

16:50 TUNING MECHANISM FOR HETEROGENEOUS NUCLEATION OF METALLIC CRYSTALS - Mingxu Xia (Shanghai Jiao Tong University)

17:10 REVEALING THE NUCLEATION AND GROWTH BEHAVIOR OF PRIMARY Si DURING SOLIDIFICATION OF HYPEREUTECTIC Al-Si ALLOYS - Yijiang Xu (Department of Materials Science and Engineering)

17:30 MECHANISMS OF TiAl ALLOYS ISOMORPHIC INOCULATION FROM CRYO-MILLED Ti-AL-Nb POWDERS - Julien Zollinger (Institut Jean Lamour)
Dendritic microstructure: Microscopic modeling #1
Microscopic modeling #1
16:10 - 17:50
Room: P4
Contributions

16:10 CAPILLARY-MEDIATED SOLID-LIQUID ENERGY FIELDS: THEIR DETECTION WITH PHASE-FIELD METHOD - Martin Glicksman (Florida Institute of Technology)

16:30 ANALYSIS AND MODELING OF DENDRITE FRAGMENTATION IN DIRECTIONAL SOLIDIFICATION - Hieram Neumann-Heyme (Helmholtz-Zentrum Dresden-Rossendorf (HZDR), Institute of Fluid Dynamics)

16:50 A NOVEL ROUTE TO THE COUPLING OF MOLECULAR DYNAMICS AND PHASE-FIELD SIMULATIONS OF CRYSTAL GROWTH - Peter Bollada (University of Leeds)

17:10 PHASE-FIELD MODELLING OF NON-EQUILIBRIUM SOLIDIFICATION BY THE THERMODYNAMIC EXTREMAL PRINCIPLE - Haifeng Wang (tate Key Laboratory of Solidification Processing, Center of Advanced Lubrication and Seal Materials, Northwestern Polytechnical University)

17:30 KINETICS OF RAPID CRYSTAL GROWTH: PHASE FIELD THEORY VERSUS ATOMISTIC SIMULATIONS - Peter Galenko (Friedrich Schiller University of Jena)
17:50 Poster Session
17:50 - 19:20
Contributions

17:50 PHASE-FIELD SIMULATION OF THE MICROSTRUCTURE EVOLUTION DURING DIRECTIONAL SOLIDIFICATION OF THE TERNARY EUTECTIC SYSTEM Bi-In-Sn - Kaveh Dargahi Noubary (Karlsruhe Institute of Technology (KIT))

17:51 FINITE ELEMENT MODELING OF SOLIDIFICATION STRUCTURES IN STEEL INGOTS - Gildas Guillemot (CEMEF - Mines ParisTech)

17:52 PHASE-FIELD STUDY OF EUTECTIC COLONY FORMATION - Michael Kellner (Karlsruhe Institute of Technology (KIT))

17:53 THE EFFECT OF STATIC MAGNETIC FIELDS ON CRYSTAL-MELT INTERFACIAL FREE ENERGY IN SOLIDIFICATION - Jiang Wang (Shanghai University)

17:54 SOLIDIFICATION OF Ti-46Al-8Nb IN HYPER-GRAVITY AND MULTI-PHYSICS MODELLING - Can Huang (Access e.V., Aachen, Germany)

17:55 DENDRITIC COLUMNAR GROWTH OF BBC BETA-(TiAl) IN MICRO- AND -HYPER GRAVITY: 1. EXPERIMENTAL RESULTS AND MACRO-SCALE MODELING - Julien Zollinger (Institut Jean Lamour)

17:56 DENDRITIC COLUMNAR GROWTH OF BBC BETA-(TiAl) IN MICRO- AND -HYPER GRAVITY: 2. PHASE-FIELD MODELING - Alexandre Viardin (ACCESS e.V.)

17:57 SOLIDIFICATION MODELING USING USER DEFINED FUNCTION IN ANSYS FLUENT - Moritz Eickhoff (Department for Industrial Furnaces and Heat Engineering of the RWTH Aachen University)

17:58 MODELING OF EUTECTIC GROWTH KINETICS WITH THERMODYNAMIC COUPLINGS - Oriane Senninger (CEMEF)

17:59 THE EFFECT OF THE ANISOTROPY OF SURFACE ENERGY AND KINETIC ATTACHMENT ON SILICON SOLIDIFICATION - Jean-Marc Debierre (Aix-Marseille University)

18:01 RAPID SOLIDIFICATION OF Al-Cu DROPLETS OF NEAR EUTECTIC COMPOSITION - Hani Henein (University of Alberta)

18:02 STUDY ON MICROSTRUCTURES, GROWTH ORIENTATION AND MECHANICAL PROPERTIES OF DIRECTIONALLY SOLIDIFIED Mg-14.61Gd ALLOY - Guangyu YANG (State Key Laboratory of Solidification Processing, Northwestern Polytechnical University)

18:03 SEMI-GRAND CANONICAL MONTE CARLO SIMULATION FOR DERIVATION OF THERMODYNAMIC PROPERTIES OF BINARY ALLOY - Ueno Kensho (The University of Tokyo)

18:04 PHASE-FIELD SIMULATIONS ON MORPHOLOGICAL CHANGE OF DENDRITE WITH DIFFERENT PREFERRED GROWTH DIRECTIONS - Geunwoo Kim (Hokkaido University)

18:05 MULTI-GPU ACCELERATION OF THREE-DIMENSIONAL PHASE-FILED COMPUTATION FOR DENDRITE GROWTH WITH THERMAL-SOLUTAL CONVECTION - Shinji Sakane (Kyoto Institute of Technology)

18:06 MICROSEGREGATION AT GRAIN BOUNDARY IN A BINARY ALLOY BICRYSTAL ANALYZED BY PHASE-FIELD SIMULATIONS - Jaehoon Lee (Hokkaido University)

18:07 ESTIMATION OF PROPERTIES OF SOLID-LIQUID INTERFACE BASED ON DATA ASSIMILATION - Yukimi OKA (Hokkaido Unicversity)

18:08 PHASE-FIELD SIMULATION OF ABNORMAL GRAIN GROWTH IN CARBON STEEL - Takahisa Kinoshita (Hokkaido University)

18:09 CHARACTERIZATION OF DENDRITIC GROWTH IN Fe-C SYSTEM BY USING TIME-RESOLVED X-RAY TOMOGRAPHY AND PHYSICS-BASED FILTERING - Hideyuki Yasuda (Kyoto University)

18:10 INTERACTION BETWEEN FLOW AND FACETED CRYSTAL GROWTH - Mihaela Stefan (Montauniversität leoben)

18:11 MULTISCALE MODELLING OF THE TWIN ROLL CASTING PROCESS - Yi Qiu (Brunel University London)

18:12 ON THE FORMATION OF INCLUSION AND MACROSEGREGATION BY AN INCLUSION-COMBINED MACROSEGREGATION MODEL - JUN LI (Shanghai Jiao Tong University)

18:14 PERMEABILITY PREDICTION IN ANY DIRECTION OF COLUMNAR DENDRITE BY PHASE-FIELD AND LATTICE BOLTZMANN METHODS - Yasumasa Mitsuyama (Kyoto Institute of Technology)

18:16 SOLIDIFICATION CRACKING DURING WELDING OF STEEL: IN SITU X-RAY OBSERVATION - Jun Li (Department of Engineering, University of Leicester)

18:18 ATOMISTIC SIMULATION OF CRACK PROPAGATION ALONG γ-TiAl LAMELLAR INTERFACE - Li Wen (Huazhong University)

18:19 CELLULAR-TO-DENDRITIC AND DENDRITIC-TO-CELLULAR MORPHOLOGICAL TRANSITIONS IN A TERNARY Al-Mg-Si ALLOY - Nathalie Mangelinck (University of São Paulo)
19:30 Dinner
Dinner
19:30 - 21:00
Wednesday, 19 June 2019
08:15 Plenary Session: Plenary Session
Plenary Session
08:15 - 10:00
Room: P1
Contributions

08:15 In situ X-ray imaging investigation of solidification of high melting temperature materials: Silicon and superalloys - Nathalie Mangelinck-Noël (IM2NP CNRS UMR 7334)

08:50 MULTISCALE MODELING OF DENDRITIC ALLOY MICROSTRUCTURES - Alain Karma (Northeastern University, Boston Massachusetts)

09:25 PHASE BOUNDARY ANISOTROPY IN LAMELLAR EUTECTICS: RESULTS FROM RECENT MICROGRAVITY EXPERIMENTS - Ulrike Hecht (Access e.V.)
10:00 Break
Break
10:00 - 10:30
10:30 Eutectic microstructure: Eutectic microstructure #1
Eutectic microstructure #1
10:30 - 12:10
Room: P1
Contributions

10:30 ROD-TO-LAMELLAR TRANSITION DURING DIRECTIONAL SOLIDIFICATION OF A MODEL TRANSPARENT EUTECTIC ALLOY - Silvere Akamatsu (CNRS - SU - INSP)

10:50 POST-SOLIDICATION EFFECTS IN DIRECTIONALLY SOLIDIFIED TERNARY EUTECTIC Al-Al2Cu-Ag2Al - Amber Genau (University of Alabama at Birmingham)

11:10 MICROSTRUCTURAL EVOLUTION DURING MULTICOMPONENT EUTECTIC SOLIDIFICATION IN THE Al-Cu-Si-Mg SYSTEM - Isaac Chang (BCAST, Brunel University London)

11:30 THE EFFECT OF FORCED MELT FLOW INDUCED BY ROTATING MAGNETIC FIELD ON THE STRUCTURE OF Al-Si EUTECTIC - Zsolt Veres (University of Miskolc)

11:50 PHASE-FIELD SIMULATIONS OF COUPLED DENDRITIC-EUTECTIC GROWTH - Marco Seiz (Karlsruhe Institute of Technology)
Dendritic microstructure: Microscopic modeling #2
Microscopic modeling #2
10:30 - 12:10
Room: P4
Contributions

10:30 MESHLESS PHASE FIELD MODELING OF DENDRITIC GROWTH BY USING AN H-ADAPTIVE COMPUTATIONAL NODE ARRANGEMENT - Tadej Dobravec (Institute of Metals and Technology, Lepi pot 11, 1000 Ljubljana, Slovenia)

10:50 MULTISCALE MATHEMATICAL SIMULATION STUDIES ON THE 3-D MORPHOLOGY AND ORIENTATION SELECTION MECHANISM OF MAGNESIUM ALLOY DENDRITE - Jinglian Du (Tsinghua University, Northwestern Polytechnical University)

11:10 SENSITIVITY OF OSCILATORY GROWTH MODES TO MISORIENTATIONS OF THE CRYSTAL AXES - Jean-Marc Debierre (IM2NP, Aix-Marseille University)

11:30 LARGE-SCALE MULTI-PHASE-FIELD SIMULATION OF POLYCRYSTALLINE GRAIN GROWTH WITH ANISOTROPIC GRAIN BOUNDARY PROPERTIES - Eisuke Miyoshi (Kyoto Institute of Technology)

11:50 SOLIDIFICATION MICROSTRUCTURES IN LPBF PROCESSED IN718 - Guillaume Boussinot (Access e.V.)
Thermomechanics & properties: Thermomechanics & properties #1
Thermomechanics & properties #1
10:30 - 12:10
Room: Auersperg 2
Contributions

10:30 STUDY OF ELASTO-PLASTIC DEFORMATION IN CAST AlCu7 ALLOY - Michael Schöbel (TU München, Germany)

10:50 A PARTITIONED SOLUTION ALGORITHM FOR FLUID FLOW AND STRESS-STRAIN COMPUTATIONS APPLIED TO CONTINUOUS CASTING - SHAOJIE ZHANG (Mines Paristech, PSL Research University - ARMINES CEMEF)

11:10 SOLID-LIQUID INTERFACIAL ENERGY OF SOLID Alα SOLITION IN EQUILIBRIUM WITH AlZn LIQUID - Elif Yılmaz (Kayseri University)

11:30 SHAPE OF THE IN-SITU (Al,Zn)-Ti REINFORCING PARTICLES AND THEIR INFLUENCE ON STRUCTURE AND STRUCTURAL STABILITY OF SELECTED Zn-Al AND Al-Zn CAST ALLOYS - Witold K. Krajewski (AGH University of Science and Technology, Faculty of Foundry Engineering, 23 Reymonta Street, 30-059 Krakow, Poland)

11:50 EFFECT OF PORES ON TENSILE FRACTURE OF DIE-CAST AlSiMgMn ALLOYS WITH 3D X-RAY μ-CT AND FE SIMULATION - Haidong Zhao (National Engineering Research Center of Near-net Shape Forming for Metallic Materials, South China University of Technology)
12:10 Lunch
Lunch
12:10 - 13:30
13:30 Eutectic microstructure: Eutectic microstructure #2
Eutectic microstructure #2
13:30 - 15:40
Room: P1
Contributions

13:30 INFLUENCE OF INTERPHASE BOUNDARY ANISOTROPY ON EUTECTIC SOLIDIFICATION MICROSTRUCTURES - Mathis Plapp (Laboratoire PMC - Ecole Polytechnique)

14:00 ANISOTROPY EFFECTS ON LAMELLAR-EUTECTIC SOLIDIFICATION MICROSTRUCTURES IN THIN Al-Al2Cu SAMPLES - Sabine Bottin-Rousseau (Sorbonne Université)

14:20 INVESTIGATION OF THE MICROSTRUCTURE ADJUSTMENT BY VELOCITY VARIATIONS DURING THE DIRECTIONAL SOLIDIFICATION OF Al-Ag-Cu WITH THE PHASE-FIELD METHOD - Johannes Hötzer (Herr)

14:40 ROLE OF SOLID-SOLID AND SOLID-LIQUID ANISOTROPIES IN EUTECTIC COLONY STRUCTURE FORMATION - Kiran Aramanda Shanmukha (Indian Institute of Science)

15:00 EFFECTS OF INTERPHASE BOUNDARY ANISOTROPY ON THE THREE-PHASE GROWTH DYNAMICS IN THE β(In) – In2Bi – γ(Sn) TERNARY-EUTECTIC SYSTEM - Melis Serefoglu (Koc University)

15:20 RAPID SOLIDIFICATION MEDIATED LAMELLAR EUTECTICS FORMATION IN Nb-Si BASED ALLOY POWDERS AND THEIR SURFACE OXIDES - Lina Jia (Beihang University)
Dendritic microstructure: Mesoscopic modeling #1
Mesoscopic modeling #1
13:30 - 15:40
Room: P4
Contributions

13:30 A 3D DISCRETE-ELEMENT MODEL FOR SIMULATING LIQUID FEEDING DURING DENDRITIC SOLIDIFICATION OF STEEL - Yi Feng (Department of Materials Science and Engineering, McMaster University, Canada.)

14:00 MULTISCALE MODELING OF DENDRITIC GROWTH USING THE DENDRITIC NEEDLE NETWORK APPROACH: RECENT DEVELOPMENTS AND FUTURE DIRECTIONS - Damien Tourret (IMDEA Materials)

14:20 MESOSCALE ENVELOPE MODELLING OF COLUMNAR GROWTH AND CONDITIONS FOR CET IN NPG-DC ALLOY - Alexandre Viardin (ACCESS e.V.)

14:40 A MESOSCOPIC MODEL FOR SOLIDIFICATION OF SYSTEMS OF LARGE NUMBER OF COLUMNAR DENDRITES - Abdellah kharicha (Montunivesität leoben)

15:00 3D DENDRITE NEEDLE NETWORK MODELING AND X-RAY RADIOGRAPHY OF EQUIAXED ALLOY SOLIDIFICATION IN GRAIN-REFINED Al-3.5wt.-%Ni - Laszlo Sturz (Access e.V.)

15:20 THREE-DIMENSIONAL MESOSCOPIC MODELING OF EQUIAXED DENDRITIC SOLIDIFICATION IN A THIN SAMPLE: EFFECT OF CONVECTION FLOW - ANTONIO OLMEDILLA (INSTITUT JEAN LAMOUR)
Thermomechanics & properties: Thermomechanics & properties #2
Thermomechanics & properties #2
13:30 - 15:40
Room: Auersperg 2
Contributions

13:30 MICROSTRUCTURE DEPENDENT ELASTIC PROPERTIES AND THERMO-ELASTO-VISCOPLASTIC CONSTITUTIVE LAWS OF METALLIC ALLOYS DURING THEIR SOLIDIFICATION - Gottfried Laschet (ACCESS e.V.)

14:00 AN INVESTIGATION OF THE CHILL-CASTING INTERFACE DYNAMICS IN PRODUCTION OF SAND-CAST A319 ENGINE BLOCKS - Farzaneh Farhang Mehr (University of British Columbia)

14:20 ON MODELLING VISCOPLASTIC BEHAVIOUR OF THE SOLIDIFYING SHELL IN THE FUNNEL-TYPE CONTINUOUS CASTING MOLD - Alexander Vakhrushev (Christian Doppler Laboratory, Montantunivesitaet Leoben)

14:40 DETERMINATION OF PATTERN ALLOWANCES FOR A STEEL CASTING USING AN INVERSE ELASTOPLASTIC DEFORMATION ANALYSIS - Christoph Beckermann (University of Iowa)

15:00 ON THE USE OF HETEROGENEOUS THERMOMECHANICAL AND THERMOPHYSICAL MATERIAL PROPERTIES IN FINITE ELEMENT ANALYSES OF CAST COMPONENTS - Johan Jansson (Jönköping University)

15:20 INTERFACES AT INTERNAL CHILLS IN SOLIDIFYING STEEL SECTIONS - Charles Monroe (UAB)
15:40 Social programme
Social programme
15:40 - 19:30

19:30 Dinner
Dinner
19:30 - 21:00
Thursday, 20 June 2019
08:15 Plenary Session: Plenary Session
Plenary Session
08:15 - 10:00
Room: P1
Contributions

08:15 MESOSCOPIC MODELING OF POWDER BED BASED ADDITIVE MANUFACTURING - Carolin Körner (FAU, Friedrich-Alexander Univeristät Erlangen-Nürnberg)

08:50 COMBINING FLOW AND STRUCTURE MECHANICS MODELLING IN SOLIDIFYING REGIONS - Andreas Ludwig (Montanuniversität Leoben)

09:25 MACROSEGREGATION FORMATION AND CONTROL IN BEARING STEEL VIA NUMERICAL SIMULATION AND EXPERIMENTAL CHARACTERIZATION - Dianzhong Li (Institute of Metal Research,Chinese Academy of Sciences)
10:00 Break
Break
10:00 - 10:30
10:30 Peritectic growth
10:30 - 12:10
Room: P1
Contributions

10:30 INVESTIGATION USING 4D-CT OF MASSIVE-LIKE TRANSFORMATION FROM THE δ TO γ PHASE DURING AND AFTER δ-SOLIDIFICATION IN CARBON STEELS - Hideyuki Yasuda (Kyoto University)

10:50 APPLICATION OF A CONCENTRIC SOLIDIFICATION TECHNIQUE TO STUDY EARLY SOLIDIFICATION PHENOMENA PERTINENT TO THE CONTINUOUS CASTING OF STEEL - Rian Dippenaar (School of Mechanical, Materials and Mechatronic and Biomedical Engineering, University of Wollongong)

11:10 PHASE-FIELD SIMULATIONS OF SOLID/LIQUID INTERFACE MORPHOLOGY AND THERMODYNAMIC PARAMETERS EVALUATION IN PERITECTIC STEELS FOR THE CONCENTRIC SOLIDIFICATION TECHNIQUE USING HIGH TEMPERATURE LASER SCANNING CONFOCAL MICROSCOPE (HTLSCM) - Dasith Deshan Liyanage (School of Mechanical, Materials and Mechatronic Engineering University of Wollongong, NSW 2522, Australia)

11:30 IMPACT OF UNEQUAL PHASE BOUNDARY ENERGIES ON THE PERITECTIC REACTION STUDIED BY PHASE-FIELD SIMULATION - Janin Eiken (Access e. V.)

11:50 OPTIMIZATION STRATEGIES FOR IDENTIFYING THE CONTROLLING MECHANISM FOR SOLID-STATE TRANSFORMATION IN FeCrNi DURING RAPID SOLIDIFICATION - Douglas M. Matson (Tufts University)
Dendritic microstructure: Mesoscopic modeling #2
Mesoscopic modeling #2
10:30 - 12:10
Room: P4
Contributions

10:30 MULTI-PHASE-FIELD LATTICE BOLTZMANN SIMULATIONS DURING FORMATION PROCESS OF EQUIAXED STRUCTURE CONSIDERING DENDRITE MOTION - Tomohiro Takaki (Kyoto Institute of Technology)

10:50 NUMERICAL SIMULATIONS OF SOLIDIFICATION STRUCTURES AND MACROSEGREGATION BY A CELLULAR AUTOMATON MODEL COUPLED WITH FLOW CALCULATION - Yukinobu Natsume (Akita University)

11:10 DIRECT NUMERICAL SIMULATIONS OF FLOTATION OF LIGHT OXIDE INCLUSIONS IN STEEL MELT AND INTERACTION WITH GROWING DENDRITIC CRYSTALS - Yun Chen (Institute of Metal Research, Chinese Academy of Sciences)

11:30 THE EFFECT OF NUCLEANT PARTICLE AGGLOMERATION ON THE EFFECTIVENESS OF GRAIN REFINEMENT BY A CELLULAR AUTOMATON APPROACH - Alain Jacot (BCAST, Brunel University London)

11:50 THREE-DIMENSIONAL PHASE-FIELD LATTICE-BOLTZMANN MODELING ON DENDRITIC AND EUTECTIC GROWTH WITH COUPLED THERMAL-SOLUTE-CONVECTION FIELDS - Ang Zhang (Tsinghua University)
Additive manufacturing: Exp. & mesoscale modeling
Exp. & mesoscale modeling
10:30 - 12:10
Room: Auersperg 2
Contributions

10:30 CAPTURING RAPID SOLIDIFICATION DURING LASER ADDITIVE MANUFACTURING USING SYNCHROTRON IMAGING - Peter Lee (University College London)

10:50 SOLIDIFICATION OF NIOBIUM-SILICIDE-BASED ALLOYS DURING LASER ADDITIVE MANUFACTURING PROCESS - Adam Allen (Department of Engineering, University of Leicester)

11:10 CELLULAR-AUTOMATON SIMULATION OF MICROSTRUCTURE EVOLUTION DURING ADDITIVE MANUFACTURING - Abhishek G.S. (Indian Institute of Technology Bombay, Mumbai, India - 400076)

11:30 SOLIDIFICATION MICROSTRUCTURE DURING SELECTIVE LASER MELTING OF Ni BASED SUPPERALLOY: EXPERIMENT AND MESOSCOPIC MODELLING - Yuze Li (Institut Jean Lamour, CNRS, IRT M2P)

11:50 STATIC MAGNETIC FIELD HAS IMPACT ON SOLIDIFICATION STRUCTURE OF METALLIC SAMPLES FABRICATED VIA ADDITIVE MANUFACTURING - Jiang Wang (State Key Laboratory of Advanced Special Steel & Shanghai University)
12:10 Lunch
Lunch
12:10 - 13:30
13:30 Intermetallics
13:30 - 15:40
Room: P1
Contributions

13:30 NUCLEATION AND GROWTH TWINNING IN Al-Mn-Fe INTERMETALLIC SOLIDIFICATION IN Mg ALLOYS - Chris Gourlay (Imperial College London)

14:00 THE FORMATION OF Al6 (Fe, Mn) PHASE IN DIE-CAST Al-Mg ALLOYS - Shouxun Ji (Brunel University London)

14:20 QUANTIFICATION OF MICROSTRUCTURE TO REVEAL THE SOLIDIFICATION PATH OF AN ALLOY - Hani Henein (University of Alberta)

14:40 SOLIDIFICATION PATH AND PHASE TRANSFORMATION IN SUPER-AUSTENITIC STAINLESS STEEL UNS S31254 - Raphaël MARIN (Institut Jean Lamour)

15:00 RECENT ADVANCES IN THE UNDERSTANDING OF THE ROLE OF VANADIUM CARBONITRIDE PRECIPITATION TO IMPROVE SURFACE EDGE CRACKING ON CONTINUOUS CASTING OF BLOOMS - Esra Erdem Hornauer (SMS group GmbH)

15:20 HIGH SHEAR TREATMENT ASSISTED FABRICATION OF METAL MATRIX PARTICULATE NANOCOMPOSITES - Yan Huang (BCAST, Brunel University London)
Dendritic microstructure: Macroscopic modeling #1
Macroscopic modeling #1
13:30 - 15:40
Room: P4
Contributions

13:30 SIMULATION OF MACROSEGREGATION AND COLUMNAR TO EQUIAXED TRANSITION IN A NUMERICAL SOLIDIFICATION BENCHMARK PROBLEM - Christoph Beckermann (University of Iowa)

14:00 COMPARISON OF NUMERICAL MACROSCOPIC MODEL FOR SEGREGATION IN SOLIDIFICATION OF BINARY ALLOYS BASED ON A MESO-SCALE EQUIAXED SOLIDIFICATION - Olga BUDENKOVA (CNRS UGA SIMAP)

14:20 THREE-PHASE NUMERICAL MODELING FOR EQUIAXED SOLIDIFICATION OF Sn-10 wt.%Pb ALLOY UNDER FORCED CONVECTION DRIVEN BY ELECTROMAGNETIC FORCE - Tao WANG (Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University, P. R. China; Univ. Grenoble Alpes, CNRS, Grenoble INP, SIMAP, F-38000 Grenoble, France)

14:40 FINITE DIFFUSION MICROSEGREGATION MODEL APPLIED TO MULTICOMPONENT ALLOYS - Vincent Maguin (SAFRAN TECH - Mines ParisTech PSL)

15:00 EFFICIENT MODEL FOR THE PREDICTION OF DENDRITIC GRAIN GROWTH USING THE LATTICE BOLTZMANN METHOD COUPLED WITH A CELLULAR AUTOMATON ALGORITHM - Stephan Jäger (LKR Leichmetallkompetenzzentrum Ranshofen GmbH, Austrian Institute of Technology, Ranshofen, Austria)
Additive manufacturing: Multiscale modeling
Multiscale modeling
13:30 - 15:40
Contributions

13:30 THERMO-MECHANICAL MODELING OF ADDITIVE MANUFACTURING BY POWDER BED FUSION AT PART SCALE - Yancheng ZHANG (CEMEF - Centre de Mise En Forme de Matériaux, MINES ParisTech, France)

14:00 THERMO-MECHANICAL SIMULATION OF TRACK DEVELOPMENT IN THE LBM PROCESSES - EFFECT OF LASER-METAL INTERACTION - Alexis Queva (CEMEF - Mines ParisTech)

14:20 PARTICLE SCALE MODELLING OF POROSITY FORMATION DURING SELECTIVE LASER MELTING PROCESS USING A COUPLED DEM-CFD APPROACH - Arvind Kumar (Indian Institute of Technology Kanpur)

14:40 MODELLING COLUMNAR AND EQUIAXED SOLIDIFICATION IN METAL ALLOY ADDITIVE MANUFACTURING - David Browne (University College Dublin)

15:00 PHASE FIELD STUDY OF SPACING EVOLUTION DURING WIRE AND LASER ADDITIVE MANUFACTURING UNDER TRANSIENT CONDITIONS - Wang Zheng (School of Materials Science and Engineering, Tsinghua University)

15:20 MACRO-MICRO COUPLED SIMULATION OF SOLIDIFICATION MICROSTRUCTURE DURING LASER ADDITIVE MANUFACTURING PROCESS - Junjie Li (State Key Laboratory of Solidification Processing, Northwestern Polytechnical University)
15:40 Break
Break
15:40 - 16:10
16:10 Solidification processing: Defects
Defects
16:10 - 17:50
Room: Auersperg 2
Contributions

16:10 A MODEL FOR COUPLING PREDICTION OF INVERSE SEGREGATION AND POROSITY FOR UP-VERTICAL UNIDIRECTIONAL SOLIDIFICATION OF Al-Cu ALLOYS - Wanqi Jie (State Key Laboratory of Solidification Processing, Northwestern Polytechnical University))

16:30 EFFECTS OF STRAIN RATE ON HOT TEAR FORMATION IN Al-Si-Cu ALLOYS - Shishira Bhagavath (Indian Institute of Technology Bombay, Mumbai)

16:50 EFFECT OF COOLING RATE ON THE POROSITY DEFECT IN THE THICK ALUMINUM CASTING BY 3D COMPUTED TOMOGRAPHY ANALYSIS - In-Sung Cho (Korea Instititue of Industrial Technology)

17:10 ANALYSIS OF COLUMNAR-TO-EQUIAXED TRANSITION EXPERIMENT IN LAB SCALE STEEL CASTING BY A MULTIPHASE MODEL - Savya Sachi (Université de Lorraine, CNRS, IJL, F-54000 Nancy, France)

17:30 THE EFFECT OF Cu AND Si CONTENTS ON THE HOT-TEARING SENSITIVITY OF 3xxx HEAT-EXCHANGER ALLOYS - Kjerstin Ellingsen (SINTEF)
Intermetallics: Intermetallics
Intermetallics
16:10 - 17:50
Room: P1
Contributions

16:10 COARSE PARTICLES FORMED DURING THE DC CASTING OF Al-Mn-Ti-Fe-Si ALLOYS - Qiang Du (SINTEF)

16:30 PREDICTION OF CARBIDE PRECIPITATION USING A COMBINED PARTIAL EQUILIBRIUM-PARA-EQUILIBRIUM - LEVER RULE APPROXIMATION IN AUTOMOBILE GEAR MATERIALS - Hongwei Zhang (1Northeastern University, Key Laboratory of Electromagnetic Processing of Materials, Shenyang, 110004, P.R. China 2 Northeastern University, School of Metallurgy, Shenyang, 110004, P.R. China)

16:50 SOLIDIFICATION BEHAVIOR AND MICROSTRUCTURE EVOLUTION OF γ-TiAl ALLOYS - Kou Hongchao (Northwestern Polytechnical University)

17:10 NUMERICAL MODELLING OF INFILTRATION OF Al INTO ADDITIVE MANUFACTURED Fe PREFORMS IN ORDER TO OBTAIN Fe-Al INTERMETALLICS - Ralf Berger (Access e.V.)
Dendritic microstructure: Macroscopic modeling #2
Macroscopic modeling #2
16:10 - 17:50
Room: P4
Contributions

16:10 ANALYSIS OF THE IMPACT OF INLET INDUCED FORCED CONVECTION ON MACROSEGREGATION FORMATION IN DC CASTING OF ALUMINIUM SHEET INGOTS - Mohammed M'Hamdi (SINTEF/NTNU)

16:30 PREDICTION OF SOLIDIFICATION STRUCTURES IN A 9.8 TON STEEL INGOT - Benjamin Gerin (CNRS, Institut Jean Lamour)

16:50 THE PREDICTION OF CASTING DEFECTS: FROM MACROSEGREGATION TO MULTI-DEFECTS MODELLING - JUN LI (Shanghai Jiao Tong University)

17:10 EFFECT OF THE CORIOLIS FORCE ON THE MACROSEGREGATION OF ALUMINUM IN THE CENTRIFUGAL CASTING OF Ti-Al ALLOYS - Martín Matías Cisternas Fernández (Université de Lorraine, CNRS, IJL)

17:30 3D MACROSEGREGATION AND FLOW CHARACTERIZATION OF HORIZONTAL DIRECT CHILL CAST ALUMINIUM SLABS - John Coleman (Purdue University)
17:50 Poster Session
17:50 - 19:20
Contributions

17:53 SOLIDIFICATION ASSESSMENT OF COMMERCIAL STEEL GRADES WITH THERMODYNAMIC DATABASES - Begoña Santillana (Tata Steel R&D)

17:54 SIMULATION OF THE MICROSTRUCTURE FORMATION DURING LASER MELTING ADDITIVE MANUFACTURING VIA THE MODIFIED CELLULAR AUTOMATA METHOD AND ITS EXPERIMENTAL VERIFICATION - Jiang Wang (State Key Laboratory of Advanced Special Steel &amp; School of Materials Science and Engineering, Shanghai University)

17:55 UTILIZING INCLUSION DATA IN CHARACTERIZATION OF OXIDE-SULFIDE STRINGERS IN HOT-ROLLED PLATES - Tuomas Alatarvas (Process Metallurgy Research Unit, University of Oulu, Finland)

17:56 CHARACTERIZATION OF HEAT TRANSFER AND ITS EFFECT ON SOLIDIFICATION IN WATER COOLED LPDC OF WHEELS - Anis Umi Saadah Binti Othman (University of British Columbia)

17:57 THE USE OF ADVANCED ANALYTICS ON ENGINEERED FEATURES TO DETECT STICKER BREAKOUT IN CONTINUOUS CASTERS - Anurag Bhatt (Tata iQ) Ranjay Singh (Tata Steel)

18:00 NUMERICAL SIMULATIONS OF ELECTROMAGNETIC COUNTERACTIONS TO MOLD FLUID FLOW ASYMMETRY DEVIATIONS - Martin Sedén (ABB)

18:01 Cerium containing inclusions: kinetic model and experimental results - Christian Bernhard (Montanuniversitaet Leoben)

18:04 LEVEL-SET MODELLING OF LASER BEAM MELTING PROCESS APPLIED ONTO CERAMIC MATERIALS - COMPARISON WITH EXPERIMENTAL RESULTS - Gildas Guillemot (CEMEF, Centre de Mise en Forme des Matériaux - Mines ParisTech)

18:05 MOLECULAR DYNAMICS SIMULATION OF THE HETEROGENEOUS NUCLEATION VIA GRAIN REFINER INOCULATED IN ALUMINIUM MELT - Takuya Fujinaga (The University of Tokyo)

18:08 MOLECULAR DYNAMICS SIMULATION OF NUCLEATION AND SOLIDIFICATION FOR ALLOY SYSTEMS - Yasushi Shibuta (The University of Tokyo)

18:09 NUMERICAL OPTIMIZATION OF THE MELT CONDITIONED DIRECT-CHILL (MC-DC) CASTING PROCESS - Bruno Lebon (BCAST, Brunel University London)

18:10 NUMERICAL SIMULATION OF FLUID FLOW, SOLIDIFICATION AND DEFECTS IN HIGH PRESSURE DIE CASTING (HPDC) PROCESS - Alain Jacot (BCAST, Brunel University London)

18:12 SOLIDIFICATION PROCESSING OF SCRAP Al-ALLOYS CONTAINING HIGH LEVELS OF Fe - Zhongyun Fan (Brunel University London)

18:13 SEGREGATION OF Ca AT THE Mg/MgO INTERFACE AND ITS EFFECT ON GRAIN REFINEMENT OF Mg ALLOYS - Zhongyun Fan (BCAST, Brunel University London, UK)

18:14 IN SITU AND OPERANDO SYNCHROTRON QUANTIFICATION OF PRIMARY SOLIDIFICATION IN IN713C DURING ADDITIVE MANUFACTURING - Samuel Clark (University College London)

18:15 MICROSTRUCTURE IN A356/AA6xxx AFTER COMPOUND CASTING WITH FLUX COATING - Aina Opsal Bakke (Norwegian University of Science and Technology)

18:17 SOLIDIFICATION MODELLING IMPROVEMENT OF THE CONTINUOUS CASTING STEEL BILLET QUALITY - Gonzalo Alvarez de Toledo (Sidenor I+D)

18:19 USING MORPHOLOGY-EQUIVALENT METHOD TO SIMULATE THE EVOLUTION OF SHRINKAGE IN Ti6Al4V ALLOY CASTINGS DURING HIP - Qian Xu (Huazhong University)

18:21 INFLUENCE OF SLAB SURFACE COOLING HISTORY ON CRACK SENSITIVITY OF MICRO-ALLOYED STEELS - Jakob Six (voestalpine Stahl GmbH)

18:22 INFLUENCE FACTORS ANALYSIS OF THE BLOCKING LAYER IN THE ELECTROMAGNETIC INDUCTION CONTROLLED AUTOMATED STEEL TEEMING SYSTEM - Qiang Wang (Wuhan University of Science and Technology and Delft University of Technology)
19:30 Music & Conference Dinner
Music & Conference Dinner
19:30 - 21:00
Friday, 21 June 2019
08:15 Plenary Session: Plenary Session
Plenary Session
08:15 - 10:00
Room: P1
Contributions

08:15 OBJECTS INTERACTING WITH SOLIDIFICATION FRONTS: FROM MATERIALS SCIENCE TO GEOPHYSICS AND BIOLOGY - Sylvain Deville (CNRS)

08:50 KEY DATA FOR SIMULATING THERMAL PROBLEMS - SWIFT MEASUREMENT OF THERMAL DIFFUSIVITY, THERMAL CONDUCTIVITY AND HEAT CAPACITY IN COMPLEX ALLOYS - Markus Rettenmayr (Otto-Schott-Institut für Materialforschung Jena)

09:25 Time Resolved X-ray Tomography: from Dendritic Growth to Mushy Zones - Peter Voorhees (Northwestern University)
10:00 Break
Break
10:00 - 10:30
10:30 Solidification processing: Simulation and optimization
Simulation and optimization
10:30 - 12:30
Room: Auersperg 2
Contributions

10:30 PREDICTION SOLIDIFICATION MICROSTRUCTURE IN HIGH PRESSURE DIE CASTING OF ALUMINIUM ALLOYS USING AN INTEGRATED COMPUTATIONAL MATERIAL ENGINEERING (ICME) APPROACH - Alan A. Luo (Ohio State University)

10:50 ONLINE MODELLING OF HEAT TRANSFER, SOLIDIFICATION AND MICROSTRUCTURE IN CONTINUOUS CASTING OF STEEL - Ville-Valtteri Visuri (Process Metallurgy Research Unit, University of Oulu)

11:10 SINGLE-PIECE SIMULATION AND QUALITY CONTROL METHODS FOR THE COMPLEX SHAPE CASTING - Jianxin Zhou (InteCAST Software Center/ Huazhong University of Science and Technology)

11:30 ON ANALYTICAL CONCEPTS OF NOVEL MULTI-RESOLUTION CASTING SIMULATIONS - Amir Horr (senior Scientist)

11:50 SIMULATION OF CASTING FILLING PROCESS USING THE LATTICE BOLTZMANN METHOD - Yongjia Zhang (Huazhong University of Science and Technology)

12:10 A NOVEL TECHNOLOGY TO PRODUCE HOMOGENIZED STEEL BY FORGING SOLIDIFYING METAL - Yun Chen (Institute of Metal Research, Chinese Academy of Sciences)
Iron and Steel processing
10:30 - 12:30
Room: P1
Contributions

10:30 CHUNKY GRAPHITE IN SPHEROIDAL GRAPHITE IRON: REVIEW OF RECENT RESULTS AND DEFINITION OF A PREDICTING INDEX - Jacques Lacaze (CIRIMAT, Université de Toulouse)

10:50 CONTROL OF SOLIDIFICATION PATTERN OF CAST IRONS BY SIMULTANEOUS THERMALS AND CONTRACTION/EXPANSION ANALYSIS - IULIAN RIPOSAN (POLITEHNICA University of Bucharest, ROMANIA)

11:10 EFFECT OF Mn/S RELATIONSHIP IN PRECIPITATION SEQUENCE OF THE MnS IN A HYPOEUTECTIC GRAY IRON - Manuel de Jesús Castro-Román (Cinvestav Saltillo)

11:30 THREE-DIMENSIONAL STUDY OF NODULE CLUSTERING AND HETEROGENEOUS STRAIN LOCALIZATION FOR TAILORED MATERIAL PROPERTIES IN DUCTILE IRON - Jakob Olofsson (Department of Materials and Manufacturing, School of Engineering, Jönköping University, Sweden)

11:50 CONTINUOUS CASTING OF HIGH CARBON STEEL: HOW DOES HARD COOLING INFLUENCE SOLIDIFICATION, MICRO- AND MACRO SEGREGATION? - Anthony Nicholas Grundy (Thermo-Calc AB)

12:10 ADVANCES IN MODELING OF STEEL SOLIDIFICATION WITH IDS - Ville-Valtteri Visuri (Process Metallurgy Research Unit, University of Oulu)
Dendritic microstructure: Role of magnetic field
Role of magnetic field
10:30 - 12:30
Room: P4
Contributions

10:30 INFLUENCE OF THERMOELECTRIC-MAGNETIC EFFECT ON SOLIDIFICATION OF ALLOYS - Zhongming REN (Shanghai University)

10:50 MODELLING OF MAGNETO-THERMO-ELECTRIC EFFECT ON SOLID GRAINS TRAJECTORIES DURING SOLIFICATION OF AlCu ALLOYS UNDER LOW FREQUENCY MAGNETIC FIELD - YVES DU TERRAIL COUVAT (SIMAP LABORATORY)

11:10 NUMERICAL SIMULATION OF FORCED FLUID FLOW IN THE MUSHY ZONE WITH THE EXISTING OF INTERMETALLIC PHASE IN AlSi7Fe1 ALLOY - Haijie Zhang (University of Leoben)

11:30 FORMATION OF METASTABLE MICROSTRUCTURES IN Al-45wt%Cu ALLOY QUENCHED IN HIGH MAGNETIC FIELD - Chuanjun Li (Shanghai University)

11:50 INSTABILITY PATTERN FORMATION AND MAGNETISM OF LIQUID METALS BY USING LIQUID-LIQUID PHASE SEPARATION UNDER HIGH MAGNETIC FIELD - JUN WANG (Northwestern Polytechnical University)

12:10 ELECTROMAGNETIC EFFECTS OF MELT AND DENDRITE GROWTH WITH PULSED MAGNETIC FIELD - Yuansheng Yang (Institute of Metal Research, Chinese Academy of Sciences)
12:30 Lunch
Lunch
12:30 - 13:30