Name: ESSC & DUPLEX 2019
Start: 2019-09-30T08:00:00+02:00
End: 2019-10-02T18:00:00+02:00
Location: Schloss Schönbrunn

ESSC & DUPLEX 2019

from Monday, 30 September 2019 (08:00) to Wednesday, 2 October 2019 (18:00)

Monday, 30 September 2019

14:00 Registration
Registration
14:00 - 15:15

15:15 Welcome
Welcome
15:15 - 15:35
Room: Room A - Maria Theresia
15:35 Keynote 1
15:35 - 16:00
Room: Room A - Maria Theresia
Contributions

15:35 DUPLEX STAINLESS STEEL MARKETS IN 2019 ....... AND BEYOND - Markus Moll (SMR GmbH - Steel & Metals Market Research)
16:00 Fabrication, forming and welding
16:00 - 17:00
Room: Room B - Maximilian
Contributions

16:00 Nd-YAG LASER PULSED WELDING: EFFECTS ON THE SUPERDUPLEX STAINLESS STEEL UNS S32750 - Vicente Afonso Ventrella (UNESP - Universidade Estadual Paulista)

16:20 COMPARISON BETWEEN AUTOGENOUS WELDING AND WITH ADDITION OF NICKEL ON Nd:YAG PULSED LASER WELDED UNS S32750 DUPLEX STAINLESS STEEL - Irene Calliari (University of Padova)

16:40 AN APPROACH FOR PREDICTION OF COIL SPECIFIC FORMING LIMIT CURVES - Timo Manninen (Outokumpu)
Metallurgy
16:00 - 17:00
Room: Room A - Maria Theresia
Contributions

16:00 REAL-TIME AND CONTACTLESS MOLD THERMAL MONITORING: IMPROVING METALLURGY, QUALITY AND PRODUCTIVITY OF BILLETS AND BLOOMS - Stefano Miani (Ergolines Lab s.r.l.)

16:20 ADVANCED TECHNOLOGIES FOR CONTINUOUS BRIGHT ANNEALING OF STAINLESS STEEL STRIP PRODUCTS IN PURE HYDROGEN ATMOSPHERE - Sascha Eppensteiner (EBNER Industrieofenbau GmbH)

16:40 CONTROL OF SOLIDIFICATION STRUCTURE IN CONTINUOUS CASTING OF FERRITIC STAINLESS STEEL - Jongchul Kim (POSCO)
17:00 Welcome Reception
Welcome Reception
17:00 - 19:00

20:30 Classical concerts with music by Mozart and Strauss in Vienna
Classical concerts with music by Mozart and Strauss in Vienna
20:30 - 22:30
Tuesday, 1 October 2019
08:30 Keynote 2
08:30 - 09:00
Room: Room A - Maria Theresia
Contributions

08:30 TAILORING THE MECHANICAL PROPERTIES THROUGH THE CONTROL OF HEAT TREATMENTS IN A PRECIPITATION HARDENING MESTABLE STAINLESS STEEL - David San-Martin (CENIM-CSIC)
09:00 Duplex stainless steels: Duplex stainless steels I
Duplex stainless steels I
09:00 - 10:20
Room: Room A - Maria Theresia
Contributions

09:00 TIME-TEMPERATURE-PRECIPITATION AND PROPERTY DIAGRAMS FOR THICK-WALLED DUPLEX STAINLESS STEEL - Andrea Putz (Institute of Materials Sciene, Joining and Forming, TU Graz, Kopernikusgasse 24/I, 8010 Graz, Austria)

09:20 APPLICATIONS OF X-RAY DIFFRACTOMETRY ON PHASE QUANTIFICATION IN STAINLESS STEELS - RODRIGO MAGNABOSCO (FEI University)

09:40 RELATION BETWEEN PITTING POTENTIAL AND PREN VALUES FOR FERRITE AND AUSTENITE IN DUPLEX STAINLESS STEELS - RODRIGO MAGNABOSCO (FEI University)

10:00 INFLUENCE OF THE PROCESS PARAMETERS ON THE TRANSFORMATION BEHAVIOR OF 2205 DURING LASER BEAM WELDING - Stefan Ulrich (Guenter Koehler Institute of Joining and Material Testing)
Simulation and modelling: Simulation and modelling I
Simulation and modelling I
09:00 - 10:20
Room: Room B - Maximilian
Contributions

09:00 UNDERSTANDING AND OPTIMIZING AOD PROCESS WITH CFD SIMULATIONS - Bernhard Voraberger (Primetals Technologies)

09:20 THERMOKINETIC SIMULATION OF σ PHASE IN DUPLEX STEELS - Aurélie Jacob (TU Wien)

09:40 COMPUTATION OF COMPETITIVE PRECIPITATION OF ETA CARBONITRIDE PHASE, Z-PHASE NITRIDE, AND INTERMETALLIC G-PHASE AT VARYING NITROGEN CONTENTS IN Nb- AND Si-ALLOYED AUSTENITIC STAINLESS STEEL - Erwin Povoden-Karadeniz (CDL-IPE TU Wien)

10:00 SIMULATION OF ELECTROMAGNETIC STIRRING IN CONTINUOUS CASTING OF STAINLESS STEEL - Mirko Javurek (Johannes Kepler Universität Linz, Institut für Strömungslehre und Wärmeüübertragung)
10:20 Coffee Break
Coffee Break
10:20 - 10:50
10:50 Duplex stainless steels: Duplex stainless steels II
Duplex stainless steels II
10:50 - 12:30
Room: Room A - Maria Theresia
Contributions

10:50 INCLUSION OF FORTA FDX 27 (UNS S82031) INTO ASTM A1084 - James Oliver (Outokumpu Stainless AB)

11:10 PARAMETER EXTRACTION FROM DUPLEX STAINLESS STEEL MICROGRAPHS AND THEIR CORRELATION TO MACRO PROPERTIES - Claes OLSSON (Sandvik Materials Technology)

11:30 EARLY STAGES OF DELETERIOUS PHASES IN SUPER- AND HYPER DUPLEX STAINLESS STEEL AND THEIR EFFECT ON TOUGHNESS - Andreas Keplinger (voestalpine BÖHLER Edelstahl GmbH & Co KG)

11:50 INFLUENCE OF THE ALLOY COMPOSITION OF FILLER METALS ON THE MICROSTRUCTURE OF WIRE AND ARC ADDITIVE MANUFACTURED COMPONENTS MADE OF DUPLEX STAINLESS STEEL - Benjamin Wittig (Otto-von-Guericke-University Magdeburg)

12:10 THE DUPLEX-STAINLESS-STEEL 1.4462 FOR FLOW LINES - Sonja Felber (Institute for Building Construction and Technology, Vienna University of Technology)
Simulation and modelling: Simulation and modelling II
Simulation and modelling II
10:50 - 12:30
Room: Room B - Maximilian
Contributions

10:50 DICTRA® SIMULATIONS OF SIGMA PHASE FORMATION IN DUPLEX STAINLESS STEELS - RODRIGO MAGNABOSCO (FEI University)

11:10 LOW TEMPERATURE SURFACE HARDENING OF STAINLESS STEEL; PREDICTING COMPOSITION AND STRESS PROFILES - Marcel Somers (Technical University of Denmark)

11:30 FLEXIBLE AOD OPTIMIZATION TECHNOLOGY FOR STAINLESS AND SPECIAL STEELMAKING - Richard Stadlmayr (Primetals Technologies Austria)

11:50 PREDICTION OF PERCENTAGE OF FERRITE AS A FUNCTION OF HEAT INPUT IN ROBOTIC GAS METAL ARC WELDING OF DUPLEX STAINLESS STEEL SAF 2205 WELDS - Maria Carolina Payares-Asprino (Norwich University)

12:10 THERMO-CALC® AND DICTRA® SIMULATIONS OF THE SOLUTION HEAT TREATMENT OF SUPERDUPLEX STAINLESS STEELS - RODRIGO MAGNABOSCO (FEI University)
12:30 Lunch
Lunch
12:30 - 14:00
14:00 Duplex stainless steels: Duplex stainless steels III
Duplex stainless steels III
14:00 - 15:40
Room: Room A - Maria Theresia
Contributions

14:00 INFLUENCE OF THE ANNEALING TREATMENT ON THE TOUGHNESS OF DUPLEX STAINLESS STEEL TYPE EN-1.4462 - Julia Contreras Fortes (ACERINOX EUROPA, SAU)

14:20 COMPUTATIONAL THERMODYNAMICS AND KINETICS TOOLS FOR DEVELOPMENT OF ADVANCED STAINLESS STEELS - Anthony Nicholas Grundy (Thermo-Calc Software, Citizen Space Zurich, Heinrichstrasse 267, 8005 Zürich, Switzerland)

14:40 DESIGN AGAINST BRITTLE FRACTURE IN DUPLEX STAINLESS STEEL CONSTRUCTIONS BY USING THE EN 1993-1-10 MODEL AND THE INFLUENCE OF PLATE THICKNESS ON THE IMPACT TOUGHNESS - Johan Pilhagen (Outokumpu Stainless, R&D Avesta, Sweden)

15:00 ELECTRICALLY ENHANCED PLASTIC DEFORMATION OF DUPLEX STAINLESS STEEL UNS S32750 - Claudio Gennari (University of Padova)

15:20 PREDICTING FERRITE FRACTIONS IN SINGLE PASS SUPER DUPLEX STAINLESS STEEL WELDS - THERMAL CYCLE ANALYSIS AND PHASE TRANSFORMATION MODELING - Vahid A Hosseini (Department of Engineering Science, University West)
Simulation and modelling: Simulation and modelling III
Simulation and modelling III
14:00 - 14:20
Room: Room B - Maximilian
Contributions

14:00 3D ViSE - SIMULATION OF A COMPLETE PROCESSING LINES - Christian Schwingenschlögl (ANDRITZ AG)
14:20 Surface properties
14:20 - 15:40
Room: Room B - Maximilian
Contributions

14:20 MAGNETIC EFFECTS ON AUSTENITIC STAINLESS STEELS AFTER A LOW TEMPERATURE CARBURIZATION - Philipp Schuler (Institute for Materials System Technology Thurgau at the University of Applied Sciences Konstanz)

14:40 PITTING SUSCEPTIBILITY OF METASTABLE AUSTENITIC STAINLESS STEELS AS A FUNCTION OF SURFACE CONDITIONS - Arnulf Hörtnagl (Institute for Materials System Technology Thurgau)

15:00 NEW DEVELOPMENTS IN HIGH TEMPERATURE SOLUTION NITRIDING OF STAINLESS STEELS - Thomas L. Christiansen (Technical University of Denmark (DTU), Department of Mechanical Engineering)

15:20 DATA DRIVEN CONTINUOUS QUALITY MONITORING IN ROLLING MILLS - Hans Peintinger (QuinLogic GmbH)
15:40 Coffee Break
Coffee Break
15:40 - 16:10
16:10 Corrosion and in service problems
16:10 - 17:30
Room: Room B - Maximilian
Contributions

16:10 CORROSION BEHAVIOUR OF SLM 316L FOR DIFFERENT BUILD DIRECTIONS AND SURFACE CONDITIONS - Rudolf Vallant (Graz University of Technology)

16:30 SCC BEHAVIOR OF SEVERAL AUSTENITIC STAINLESS STEELS IN PROTOTYPICAL SYNGAS CLEANING SYSTEM CONDITIONS - Francisco Javier Perosanz (CIEMAT)

16:50 THE USE OF NICKEL-CONTAINING ALLOYS IN THE CHEMICAL INDUSTRY - Michael Davies (Nickel Institute)

17:10 HYDROGEN UPTAKE OF DUPLEX 2205 AT H2 PARTIAL PRESSURES UP TO 100 BAR - Anton Trautmann (Montanuniversitaet Leoben)
Duplex stainless steels: Duplex stainless steels IV
Duplex stainless steels IV
16:10 - 16:50
Room: Room A - Maria Theresia
Contributions

16:10 ON THE USE OF COMPUTATIONAL THERMODYNAMICS FOR PREDICTING THE PRECIPITATION AND GROWTH OF SECONDARY PHASES IN STAINLESS STEELS - Sten Wessman (Swerim AB)

16:30 INFLUENCE OF SIGMA PHASE PRECIPITATION IN THE 600 TO 750 °C RANGE ON MECHANICAL PROPERTIES OF SAF2205 - Borut Žužek (Institute of metals and technology)
16:50 Environmental aspects
16:50 - 17:50
Room: Room A - Maria Theresia
Contributions

16:50 TREATMENT AND DISPOSAL OF Cr(Vl) CONTAMINATED STEEL PLANT WASTE PRODUCTS - Ulrich Meyn (MKN Technologies GmbH)

17:10 ENERGY AND ENVIRONMENTAL SOLUTIONS FOR STAINLESS STEELMAKING: SUCCESSFUL PROJECTS & INNOVATIVE PRODUCTS - Thomas Steinparzer (Primetals Technologies Austria)

17:30 EFFLUENT FREE STAINLESS STEEL PICKLING - Daniel Fussek (ANDRITZ AG)
17:30 Fabrication, forming and welding: Fabrication, forming and welding
Fabrication, forming and welding
17:30 - 17:50
Room: Room B - Maximilian
Contributions

17:30 MONOBLOCK 4.0: THE NEXT EVOLUTIONARY STEP IN THE STANDARD STAINLESS STEEL COLD ROLLING MARKET - Fritz Kopin (ANDRITZ Sundwig GmbH)
19:00 Conference dinner
Conference dinner
19:00 - 22:00
Wednesday, 2 October 2019
08:30 Keynote 3
08:30 - 09:00
Room: Room A - Maria Theresia
Contributions

08:30 PASSIVITY OF STAINLESS STEELS - CHEMICAL COMPOSITION, ACTIVATION AND REPASSIVATION - Gregor Mori (Montanuniversitaet Leoben)
09:00 Applications
09:00 - 10:20
Room: Room B - Maximilian
Contributions

09:00 APPLICATION OF HIGH STRENGTH DUPLEX STAINLESS STEEL WIRE FOR OFFSHORE FISH FARMING CAGES AND GEOLOGICAL PROTECTION SYSTEMS - Matthias Sorg (Institute for Materials System Technology Thurgau)

09:20 DEVELOPMENT OF FERRITIC STAINLESS HOT-ROLLED STEEL SHEETS FOR EXHAUST PIPE FLANGE - Jun-ichi Hamada (Nippon Steel & Sumikin Stainless Steel Corporation, Research & Development Center)

09:40 DEVELOPMENT OF AUSTENITIC STAINLESS STEEL SHEET WITH EXCELLENT HEAT RESISTANCE FO AUTOMOTIVE EXHAUST SYSTEM PARTS - Chikako Takushima (Nippon Steel & Sumikin Stainless Steel Corporation, Research & Development Center)

10:00 HOT CRACK TENDENCY IN THIN-WALLED HIGHLY ALLOYED AUSTENITIC STAINLESS STEEL - Dariusz Dyja (Rybnik Engineering Center, Tenneco Automotive)
Martensitic stainless steels
09:00 - 10:00
Room: Room A - Maria Theresia
Contributions

09:00 FORMATION OF AUSTENITE DURING AGEING OF 17-4 PH PRECIPITATION HARDENING STAINLESS STEEL - Jaka Burja (Institute of Metals and Technology)

09:20 DEVELOPMENT OF A NEW MARTENSITIC HIGH NITROGEN STAINLESS STEEL GRADE - Herrera Clara (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)

09:40 HIGH AND LOW TEMPERATURE SURFACE HARDENING OF MARTENSITIC STAINLESS STEELS - Chiara Tibollo (Technical University of Denmark)
10:00 Austenitic stainless steels
10:00 - 10:20
Room: Room A - Maria Theresia
Contributions

10:00 AN OVERVIEW OF MECHANICAL PROPERTIES OF TODAY'S GRAIN-REFINED AUSTENITIC STAINLESS STEELS - Antti Järvenpää (University of Oulu / Kerttu Saalasti Institute / FMT-group)
10:20 Coffee Break
Coffee Break
10:20 - 10:50
10:50 Austenitic stainless steels: Austenitic stainless steels
Austenitic stainless steels
10:50 - 12:10
Room: Room A - Maria Theresia
Contributions

10:50 INFLUENCE OF HEAT TREATMENT AND THERMOCHEMICAL SURFACE ENGINEERING ON THE HIERARCHICAL MICROSTRUCTURES OF 3D PRINTED AUSTENITIC STAINLESS STEEL - Cecilie Vase Funch (Technical University of Denmark)

11:10 MONITORING THE SURFACE QUALITY OF STAINLESS STEEL SLABS WITH REVEAL CAST - FINDINGS AND SUB-SEQUENT QUALITY IMPROVEMENTS - Paavo Hooli (Senior Adviser)

11:30 THE EFFECT OF HEAT TREATMENT AND SURFACE HARDENING OF 3D PRINTED AUSTENITIC STAINLESS STEEL AlSl316 ON CORROSION AND WEAR PROPERTIES - Emilie H. Valente (Technical University of Denmark)

11:50 HIGH NITROGEN HIGH CARBON STAINLESS STEEL - Mamdouh Eissa (Central Metallurgical Research & Development Institute (CMRDI))
Ferritic stainless steels: Ferritic stainless steels
Ferritic stainless steels
10:50 - 11:30
Room: Room B - Maximilian
Contributions

10:50 DEVELOPMENT OF HIGH FORMABLE FERRITIC STAINLESS STEEL FOR AUTOMOTIVE EXHAUST SYSTEM - Il-Chan Jung (POSCO STS Research group)

11:10 SCIENCE AND TECHNOLOGY OF HIGH PERFORMANCE FERRITIC (HiperFer) STEELS - Bernd Kuhn (Forschungszentrum Juelich GmbH, Insitute of Energy and Climate Reserach (IEK), Microstructure and Properties of Materials (IEK-2))
12:10 Lunch
Lunch
12:10 - 13:40