13–17 Sept 2021 Virtual Conference
Virtual
Europe/Vienna timezone
Thank you very much for your participation!

Effect of forced melt flow on the micro- and mesostructure of Al-12.6Si eutectic alloy

16 Sept 2021, 17:40
20m
Room 7

Room 7

Oral Presentation C6. Solidification, casting and advanced metallurgical processing C6_Solidification, casting and advanced metallurgical processing

Speaker

Mr Kassab Alomari (University of Miskolc)

Description

The experiments aimed to investigate the effect of stirring by Rotation Magnetic Field (RMF) on the solidified micro- and mesostructure of Al-12.6%Si alloy. The solidification experiments were performed in a Bridgman-type furnace in earth conditions at an average sample-movement velocity (vmov = 0.1 mm/s) and average temperature gradients (G = 6 K/mm) without stirring the melt as well as during a magnetic stirring of different intensity. The diameter of the samples was 8 mm, and their length was 110 mm. In the solidification process, the sample's temperature was measured at 13 points using thermocouples. On the parallel section of the sample, the amount of the eutectic, the Si concentration distribution, the interlamellar distances (λ), the length, and orientation angle of Si lamellas were investigated by using new measuring methods

Speaker Country Jordan

Authors

Mr Kassab Alomari (University of Miskolc) Prof. András Roósz (Miskolc University) Dr Arnold Rónaföldi Mária Svéda Zsolt Veres (University of Miskolc)

Presentation materials

There are no materials yet.