EUROPEAN CONGRESS AND EXHIBITION ON ADVANCED MATERIALS AND PROCESSES - EUROMAT 2021

Despite extensive research, the manufacture in the bulk of high‐performance flake‐based magnetic composites with a highly aligned, nacre‐like structure remains challenging. Many challenges can be overcome by freeze casting in an externally applied, uniform magnetic field, which causes both the flakes and the composite walls of the cellular solid to align parallel to the B‐field lines. When appropriately sized, the flakes experience a second alignment parallel to the freezing direction because of a shear flow that occurs due to both the volumetric expansion of the ice phase and mold contraction during the directional solidification. The resulting orthotropic structure of the freeze‐cast magnetic composite is reflected in orthotropic mechanical and magnetic properties of the material. The magnetic composites manufactured by magnetic‐field assisted freeze casting outperform by a factor of 2–4 in terms of stiffness, strength, and toughness materials that are processed in the absence of a magnetic field and do not exhibit a monodomain architecture. Additionally, the anisotropic freeze‐cast magnetic composites achieve lower losses in two directions of flux excitation so that they can be used without an additional high permeability flux return path in applications like power transformation. Because of the highly aligned microstructure, it is possible to compact the initially lamellar composite with 90% porosity to at least 80% strain. The results presented in this study illustrate the tremendous potential for magnetic freeze casting of nacre-like magnetic composites for use in power conversion.