5th International High Manganese Steel Conference - HMNS 2022

Name: 5th International High Manganese Steel Conference - HMNS 2022
Start: 2022-05-23T08:00:00+02:00
End: 2022-05-25T16:50:00+02:00
Location: voestalpine Stahlwelt

23–25 May 2022 Hybrid conference

voestalpine Stahlwelt

Europe/Vienna timezone

Support

Author List

Sébastien Allain (Institut Jean Lamour)
- Author in In situ determination of austenite mechanical stability in medium manganese steels by high energy X-ray diffraction on synchrotron beamline
- Author in In situ investigation of medium manganese microstructure formation during intercritical annealing by high energy X-ray diffraction on synchrotron beamline
- Author in TEM characterization of stability of retained austenite in medium Mn steel under severe deformation
Tarek Allam (RWTH Aachen)
- Co-author in Alloying and Processing of Medium Manganese Steels for Forging Applications
Auezhan Amanov (Sunmoon University)
- Author in Hydrogen charging behavior of the UNSM processed high-Mn steels
John Aristeidakis (University of Thessaly)
- Author in Computational alloy design of Medium-Mn steels
- Author in Constitutive and transformation kinetics modeling of ε-, α΄-Martensite and mechanical twinning in Medium-Mn steels
Seyed Nima Babaei (IEHK - Steel Institute)
- Author in Effect of Nitrogen and Grain Size on Mechanical Properties of High Manganese TWIP Steels
Hyo Ju Bae (Gyeongsang national university)
- Author in Comparison of passive films formed on a high-Cr adding high-Mn steel and typical austenitic stainless steels (virtual presentation)
Seung Mi Baek (POSTECH)
- Author in Hydrogen charging behavior of the UNSM processed high-Mn steels
David A Baker (ExxonMobil Upstream Research Company)
- Author in High Manganese Steel for Mooring Chain Applications (virtual presentation)
Silvia Barella (Politecnico di Milano)
- Author in Thermal treatment effect on cold rolled high Mn lightweight steels
Patrick Barges (Arcelormittal Global R&D)
- Author in Intergranular and interphase segregation in Medium Mn TRIP steels
Andrea Bauch (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)
- Author in Development of a new high-strength maraging steel for aerospace applications.
- Author in Development of high-Mn high strength steel for electric vehicles
Erich Berger
- Author in Consideration of critical aspects concerning large-scale production and use in automotive applications based on an optimized alloying concept for a batch-annealed medium-Mn780 grade
Christian Bernhard (Montanuniversitaet Leoben)
- Co-author in High temperature thermodynamics of the Fe-C-Mn system; new experimental data for the Fe-C-10 and 20 wt.-% Mn system
Kazi Bhadhon (McMaster University)
- Author in Selective Oxidation and Reactive Wetting of Medium-Manganese Third-Generation Advanced High Strength Steels
Charline Blankart
- Author in The potential of Q&P-Treated Medium Manganese Steels for Press-Hardening Applications
Wolfgang Bleck (Steel Institute, RWTH Aachen University)
- Author in Nano-precipitation and austenite reversion in a Cu and Ni containing medium-Mn steel
- Co-author in Revealing the austenite reversion mechanism in medium-Mn steel by innovative cyclic partial-transformation annealing
Wolfgang Bleck (RWTH Aachen)
- Author in Alloying and Processing of Medium Manganese Steels for Forging Applications
- Author in Applicability improvement by deformation mechanism-controlled rolling of high manganese steels
Eve-Line Cadotte (Université Libre de Bruxelles)
- Author in Understanding the contributions on the work-hardening of a 5 wt.% manganese quenched and partitioned steel
Changhong Cai (University of Science and Technology Beijing)
- Co-author in The effect of intercritical annealing temperature on warm-rolled medium manganese steel
F. Cao (ExxonMobil Research & Engineering)
- Co-author in High Manganese Steels for the Oil, Gas, and Energy Industry Applications: State-of-the-art & Emerging Opportunities (virtual presentation)
Perla Julieta Cerda-Vazquez (Universidad Autonoma de San Luis Potosi)
- Author in Mechanical integrity and microstructural changes in the welded joints of third generation automotive AHSS in as hot rolled and after post-annealing
Guocai Chai (Sandvik group)
- Author in Advanced austenitic stainless steels with high N and Mn
Hao Chen (Key Laboratory for Advanced Materials of Ministry of Education, School of Materials Science and Engineering, Tsinghua University, Beijing, China)
- Co-author in High strength medium Manganese TRIP steel with increased hydrogen resistance due to heterogeneous Mn distribution (virtual presentation)
Seon-Min Choi (Yonsei university)
- Co-author in Incomplete γ → ε Martensitic Transformation in a High Mn Alloy
Seunggyu Choi (Jeonbuk National University)
- Co-author in Resetting process into medium-Mn steel to recover the reduced ductility by cold working
Pyuck-Pa Choi (Korea Advanced Institute of Science and Technology)
- Co-author in Microstructural evolution and tensile behaviour of V-added medium-Mn steel
Won Seok Choi (Korea Advanced Institute of Science and Technology)
- Co-author in Microstructural evolution and tensile behaviour of V-added medium-Mn steel
Christian Commenda (voestalpine Steel Linz, Department for microstructure and surface analysis)
- Author in Correlative Diffraction Studies of Deformed Medium Manganese Steel Grades
Jean-Philippe Couzinié (CNRS UMR7182, Institut de Chimie et des Matériaux de Paris Est)
- Author in Direct monitoring of twinning/detwining in a TWIP steel under reversed cyclic loading (virtual presentation)
José de Jesús Cruz Rivera (Instituto de Metalurgía-UASLP)
- Co-author in Microstructural characterization and tensile properties of a medium Mn steel welded joint
Claire Davis (The University of Warwick)
- Co-author in A study of the deformation mechanisms and scaling up of a medium Mn steel with 8 wt% Mn
Emmanuel De Moor (Colorado School of Mines)
- Author in Processing, Properties, and Microstructure Interrelationships in Medium Manganese Steels
- Co-author in Austenite Evolution and Mn Redistribution during Double Soaking
Clément D'Hondt (CNRS UMR7649, Laboratoire de Mécanique des Solides, Ecole Polytechnique and Institut de Chimie des Matériaux Paris Est)
- Author in Direct monitoring of twinning/detwining in a TWIP steel under reversed cyclic loading (virtual presentation)
Ran Ding (Key Laboratory for Advanced Materials of Ministry of Education, School of Materials Science and Engineering, Tsinghua University, Beijing, China)
- Co-author in High strength medium Manganese TRIP steel with increased hydrogen resistance due to heterogeneous Mn distribution (virtual presentation)
Xizhen Dong (Max-Planck-Institut für Eisenforschung, Germany)
- Author in Hydrogen associated decohesion and localized plasticity in a high-Mn austenite-ferrite lightweight steel (virtual presentation)
Véronique DOQUET (CNRS, Laboratoire de mécanique des Solides, Ecole Polytechnique)
- Author in Direct monitoring of twinning/detwining in a TWIP steel under reversed cyclic loading (virtual presentation)
Claudia Drebenstedt
- Co-author in Structure-Property Relationship in Additively Manufactured High-Manganese Steels
Lode Duprez (Arcelormittal Global R&D Gent)
- Author in Advanced characterization of medium Mn steel using a combination of EPMA and EBSD
- Author in Using high speed camera to understand edge cracking during hot rolling of lightweight Fe-Mn-Al-C steels
Aniruddha Dutta (ArcelorMittal)
- Author in Advanced characterization of medium Mn steel using a combination of EPMA and EBSD
- Author in Using high speed camera to understand edge cracking during hot rolling of lightweight Fe-Mn-Al-C steels
David Dye (Imperial College London)
- Co-author in A study of the deformation mechanisms and scaling up of a medium Mn steel with 8 wt% Mn
Sven Eck (Materials Center Leoben Forschung GmbH)
- Co-author in Investigation of detwinning due to cyclic tensile straining in Hadfield steel
Mohamed Elkot (Max-Planck-Institut für Eisenforschung)
- Author in Grain boundary κ-carbides in high manganese lightweight steel: Degradation assessment and potential solutions (virtual presentation)
Günter Fafilek (Technical University of Vienna, Department of Chemical Technologies and Analytics)
- Author in Comparative studies of passive layers of CrMnN and CrNi austenitic steel stainless grades highlighting the effect of manganese
J. Fenske (ExxonMobil Upstream Research Company)
- Co-author in High Manganese Steels for the Oil, Gas, and Energy Industry Applications: State-of-the-art & Emerging Opportunities (virtual presentation)
Jamey A Fenske (ExxonMobil Upstream Research Company)
- Author in High Manganese Steel for Mooring Chain Applications (virtual presentation)
Rainer Fluch (voestalpine BÖHLER Edelstahl GmbH& CoKG)
- Author in Comparative studies of passive layers of CrMnN and CrNi austenitic steel stainless grades highlighting the effect of manganese
Carlos Gamaliel Garay Reyes (Centro de Investigación de Materiales Avanzados (CIMAV) )
- Co-author in Microstructural characterization and tensile properties of a medium Mn steel welded joint
Carlos Gamaliel Garay-Reyes (Centro de Investigación en Materiales Avanzados)
- Author in Mechanical integrity and microstructural changes in the welded joints of third generation automotive AHSS in as hot rolled and after post-annealing
Carlos Garcia-Mateo (National Center for Metallurgical Research (CENIM-CSIC))
- Co-author in Grain size evolution during intercritical annealing of 5% medium-Mn steel
Baptiste Gault (Max-Planck-Institut für Eisenforschung, Düsseldorf, Germany)
- Co-author in High strength medium Manganese TRIP steel with increased hydrogen resistance due to heterogeneous Mn distribution (virtual presentation)
Mélanie Gauvin
- Author in Advanced characterization of medium Mn steel using a combination of EPMA and EBSD
Guillaume Geandier (Institut Jean Lamour)
- Author in In situ determination of austenite mechanical stability in medium manganese steels by high energy X-ray diffraction on synchrotron beamline
- Author in In situ investigation of medium manganese microstructure formation during intercritical annealing by high energy X-ray diffraction on synchrotron beamline
- Author in TEM characterization of stability of retained austenite in medium Mn steel under severe deformation
Alexandra Glover (Los Alamos National Lab, Colorado School of Mines)
- Author in Processing, Properties, and Microstructure Interrelationships in Medium Manganese Steels
- Co-author in Austenite Evolution and Mn Redistribution during Double Soaking
Stéphane Godet (Université Libre de Bruxelles)
- Author in Understanding the contributions on the work-hardening of a 5 wt.% manganese quenched and partitioned steel
Peng Gong (The University of Sheffield)
- Co-author in A study of the deformation mechanisms and scaling up of a medium Mn steel with 8 wt% Mn
Ana González (UASLP)
- Author in Microstructural characterization and tensile properties of a medium Mn steel welded joint
Abraham Alfredo González Lara (Instituto de Metalurgía-UASLP)
- Co-author in Microstructural characterization and tensile properties of a medium Mn steel welded joint
Frank Erik Goodwin Goodwin (International Zinc Association)
- Author in Selective Oxidation and Reactive Wetting of Medium-Manganese Third-Generation Advanced High Strength Steels
Adam Grajcar (SIlesian University of Technology)
- Author in Comparison of dynamic mechanical behavior and microstructure features in thermo-mechanically rolled 3Mn-Al and 5Mn-Al sheet steels
- Author in Effect of heating and cooling rates on the microstructure of a double soaked medium-manganese Al-alloyed steel
- Author in Influence of second intercritical annealing temperature on austenite grain size and its thermal stability in 5Mn steel
- Co-author in Grain size evolution during intercritical annealing of 5% medium-Mn steel
Alexander Gramlich (Steel Institute, RWTH Aachen University)
- Co-author in Alloying and Processing of Medium Manganese Steels for Forging Applications
Zbigniew Gronostajski
- Author in Effect of the heat generated during deformation at high strain rates on the structure and properties of high manganese steels with twinning as the dominant deformation mechanism.
- Co-author in Comparison of dynamic mechanical behavior and microstructure features in thermo-mechanically rolled 3Mn-Al and 5Mn-Al sheet steels
Andrea Gruttadauria (Politecnico di Milano)
- Author in Thermal treatment effect on cold rolled high Mn lightweight steels
Guiyoung Gu (POSTECH)
- Author in Microstructure and tensile properties of room temperature Q&P processed 0.25C – 4.0Mn – 1.5Si steel starting from chemically heterogeneous microstructure
Qinyi Guo (University of Science and Technology Beijing)
- Co-author in Revealing the austenite reversion mechanism in medium-Mn steel by innovative cyclic partial-transformation annealing
Christian Haase
- Author in Design and properties of additively manufactured high-manganese steels
- Co-author in Structure-Property Relationship in Additively Manufactured High-Manganese Steels
Carola Hahn (Materials Center Leoben Forschung GmbH)
- Co-author in Investigation of detwinning due to cyclic tensile straining in Hadfield steel
Susanne Hahn (Primetals Technologies Austria GmbH)
- Co-author in High temperature thermodynamics of the Fe-C-Mn system; new experimental data for the Fe-C-10 and 20 wt.-% Mn system
Gregory Haidemenopoulos (University of Thessaly, Greece)
- Author in Computational alloy design of Medium-Mn steels
- Author in Constitutive and transformation kinetics modeling of ε-, α΄-Martensite and mechanical twinning in Medium-Mn steels
Jeongho Han (Hanyang University)
- Co-author in Microstructural evolution and tensile behaviour of V-added medium-Mn steel
Jeongho Han (Hanyang university)
- Author in Relationship between the microstructural morphology and mechanical response of medium-Mn steels
- Co-author in Novel cryogenic impact toughness of 200 J in Low-Ni martensitic steels
Jeongho Han (Hanyang University)
- Co-author in Design of lightweight maraging steel
Jeongho Han (Hanyang University)
- Co-author in Resetting process into medium-Mn steel to recover the reduced ductility by cold working
Christian Hannemann
- Co-author in Structure-Property Relationship in Additively Manufactured High-Manganese Steels
Marco Haupt (RWTH Aachen)
- Author in Applicability improvement by deformation mechanism-controlled rolling of high manganese steels
Michael Hauser (TU Bergakademie Freiberg)
- Author in Modeling of mechanical properties of metastable austenitic Cr-Mn-Ni steels with TRIP and TWIP effect
- Co-author in Quenching and Partitioning of Metastable Austenitic CrMnNi-Steels
JOSE LUIS HERNANDEZ RIVERA (UNIVERSIDAD AUTONOMA DE SAN LUIS POTOSI)
- Author in Mechanical integrity and microstructural changes in the welded joints of third generation automotive AHSS in as hot rolled and after post-annealing
José Luis Hernández Rivera (CONACYT- Instituto de Metalurgia-UASLP)
- Co-author in Microstructural characterization and tensile properties of a medium Mn steel welded joint
Clara Herrera (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)
- Author in Development of a new high-strength maraging steel for aerospace applications.
- Author in Development of high-Mn high strength steel for electric vehicles
Tilmann Hickel (MPIE)
- Author in Ab initio based investigation of the role of retained austenite in Hydrogen embrittlement of steels
Ryota Hidaka (Kyushu University)
- Author in Effect of carbon on dislocation density and hardness in ausformed medium Mn martensitic steel (virtual presentation)
Thomas Hipke
- Co-author in Structure-Property Relationship in Additively Manufactured High-Manganese Steels
Gerhard Hirt (Institute of Metal Forming)
- Co-author in Simulation of the TWIP/TRIP effect of high manganese steels in dependence of the applied stress condition
Nils Holtmann
- Author in Consideration of critical aspects concerning large-scale production and use in automotive applications based on an optimized alloying concept for a batch-annealed medium-Mn780 grade
Jin-Sung Hong (Yonsei university)
- Co-author in Incomplete γ → ε Martensitic Transformation in a High Mn Alloy
Bin Hu (University of Science and Technology Beijing)
- Co-author in Revealing the austenite reversion mechanism in medium-Mn steel by innovative cyclic partial-transformation annealing
Mingxin Huang (The University of Hong Kong)
- Author in Negative strain rate sensitivity in a quenching and partitioning medium Mn steel (virtual presentation)
Chengpeng Huang (The University of Hong Kong)
- Author in Negative strain rate sensitivity in a quenching and partitioning medium Mn steel (virtual presentation)
Qiuliang Huang (TU Bergakademie Freiberg/ IEC)
- Co-author in Quenching and Partitioning of Metastable Austenitic CrMnNi-Steels
Weifeng Huo (University of Science and Technology Beijing)
- Author in Achieving Short-time Annealing Toughening Through Trace Nb Addition in 4Mn steels
Weifeng Huo (University of Science and Technology Beijing)
- Co-author in The effect of intercritical annealing temperature on warm-rolled medium manganese steel
Sergiu Ilie (voestalpine Stahl Linz GmbH)
- Co-author in High temperature thermodynamics of the Fe-C-Mn system; new experimental data for the Fe-C-10 and 20 wt.-% Mn system
Atsushi Ito (University of Hyogo)
- Author in Analysis of mechanical properties in ultrafine single variant martensite in 5-7%Mn steels by synchrotron radiation
Magdalena, Barbara Jabłońska (Silesian University of Technology)
- Author in Dynamic deformation behaviours and microstructure evolution of high manganese steels
Magdalena B. Jabłońska (Silesian University of Technology)
- Author in Effect of the heat generated during deformation at high strain rates on the structure and properties of high manganese steels with twinning as the dominant deformation mechanism.
Mun Sik Jeong (Hanyang University)
- Co-author in Microstructural evolution and tensile behaviour of V-added medium-Mn steel
Mun Sik Jeong (Hanyang University)
- Author in Resetting process into medium-Mn steel to recover the reduced ductility by cold working
José A. Jiménez (National Center for Metallurgical Research)
- Co-author in Grain size evolution during intercritical annealing of 5% medium-Mn steel
H.W. JIN (ExxonMobil Research & Engineering)
- Author in High Manganese Steels for the Oil, Gas, and Energy Industry Applications: State-of-the-art & Emerging Opportunities (virtual presentation)
H. W. Jin (ExxonMobil Research & Engineering Company)
- Author in High Manganese Steel for Mooring Chain Applications (virtual presentation)
H. Jun (ExxonMobil Research & Engineering)
- Co-author in High Manganese Steels for the Oil, Gas, and Energy Industry Applications: State-of-the-art & Emerging Opportunities (virtual presentation)
Chanwon Jung (Korea Advanced Institute of Science and Technology)
- Co-author in Microstructural evolution and tensile behaviour of V-added medium-Mn steel
Simone Kaar (voestalpine Stahl GmbH)
- Author in Correlation between microstructure and ductility characteristics of lean medium Mn Q&P steels
Karolinka Kowalczyk
- Author in Effect of the heat generated during deformation at high strain rates on the structure and properties of high manganese steels with twinning as the dominant deformation mechanism.
Katarzyna Jasiak
- Author in Effect of the heat generated during deformation at high strain rates on the structure and properties of high manganese steels with twinning as the dominant deformation mechanism.
Yuzo Kawamoto (Nippon Steel)
- Author in Effect of carbon on dislocation density and hardness in ausformed medium Mn martensitic steel (virtual presentation)
Yuzo Kawamoto (Nippon Steel)
- Co-author in Strain distribution in duplex martensitic medium Mn steel (virtual presentation)
Yuzo Kawamoto (Nippon Steel)
- Author in Toughening mechanism of medium Mn martensitic steel treated with thermomechanical control process and intercritical annealing-virtual presentation
Shinya Kawamura (Kyushu University)
- Co-author in Strain distribution in duplex martensitic medium Mn steel (virtual presentation)
Dilay Kibaroglu (RWTH Aachen)
- Author in Structure-Property Relationship in Additively Manufactured High-Manganese Steels
Chae Young Kim (Hanyang University)
- Author in Design of lightweight maraging steel
Ji Hoon Kim (Graduate Institute of Ferrous & Energy Technology, POSTECH)
- Co-author in Microstructure and tensile properties of room temperature Q&P processed 0.25C – 4.0Mn – 1.5Si steel starting from chemically heterogeneous microstructure
Sung-Joon Kim (Graduate Institute of Ferrous Technology, POSTECH)
- Author in Recent progress and understanding N behavior in Cr-Mn-(C,N) austenitic steels - virtual presentation
Jung Gi Kim (Gyeongsang National University)
- Author in Comparison of passive films formed on a high-Cr adding high-Mn steel and typical austenitic stainless steels (virtual presentation)
- Author in Hydrogen charging behavior of the UNSM processed high-Mn steels
Hyoung Seop Kim (POSTECH)
- Author in Hydrogen charging behavior of the UNSM processed high-Mn steels
Kwang Kyu Ko (Gyeongsang national university, Repulic of Korea)
- Author in Comparison of passive films formed on a high-Cr adding high-Mn steel and typical austenitic stainless steels (virtual presentation)
Patrick Köhnen
- Co-author in Structure-Property Relationship in Additively Manufactured High-Manganese Steels
Aleksandra Kozłowska (Silesian University of Technology)
- Author in Effect of heating and cooling rates on the microstructure of a double soaked medium-manganese Al-alloyed steel
- Author in Influence of second intercritical annealing temperature on austenite grain size and its thermal stability in 5Mn steel
Jakub Krawczyk (Wroclaw University of Technology)
- Co-author in Comparison of dynamic mechanical behavior and microstructure features in thermo-mechanically rolled 3Mn-Al and 5Mn-Al sheet steels
Daniel Krizan (voestalpine Steel Division GmbH Linz)
- Author in Research and development of steel grades with elevated Mn content at voestalpine and its scientific partners
Daniel Krizan (voestalpine Stahl GmbH, Linz, Austria)
- Author in Consideration of critical aspects concerning large-scale production and use in automotive applications based on an optimized alloying concept for a batch-annealed medium-Mn780 grade
- Co-author in Correlation between microstructure and ductility characteristics of lean medium Mn Q&P steels
Lutz Krüger (Institute of Materials Engineering, TU Bergakademie Freiberg)
- Co-author in Quenching and Partitioning of Metastable Austenitic CrMnNi-Steels
- Co-author in Strain-induced α´-Martensite Evolution of Fe-17Cr-8.6Mn-4Ni-0.17N Steel at different Temperatures
Ulrich Krupp (RWTH Aachen University / IEHK Steel Institute)
- Author in Applicability improvement by deformation mechanism-controlled rolling of high manganese steels
- Author in Effect of Nitrogen and Grain Size on Mechanical Properties of High Manganese TWIP Steels
- Author in Influence of second intercritical annealing temperature on austenite grain size and its thermal stability in 5Mn steel
- Co-author in The potential of Q&P-Treated Medium Manganese Steels for Press-Hardening Applications
Ulrich Krupp
- Co-author in Structure-Property Relationship in Additively Manufactured High-Manganese Steels
Ulrich Krupp (Steel Institute, RWTH Aachen University)
- Co-author in Revealing the austenite reversion mechanism in medium-Mn steel by innovative cyclic partial-transformation annealing
Thomas Kwok (Imperial College London)
- Author in A study of the deformation mechanisms and scaling up of a medium Mn steel with 8 wt% Mn
Mathias Lamari (Institut Jean Lamour)
- Author in In situ determination of austenite mechanical stability in medium manganese steels by high energy X-ray diffraction on synchrotron beamline
- Author in In situ investigation of medium manganese microstructure formation during intercritical annealing by high energy X-ray diffraction on synchrotron beamline
- Author in TEM characterization of stability of retained austenite in medium Mn steel under severe deformation
Young-Kook Lee (Yonsei university)
- Author in Incomplete γ → ε Martensitic Transformation in a High Mn Alloy
Hyun Wook Lee (Hanyang university)
- Author in Novel cryogenic impact toughness of 200 J in Low-Ni martensitic steels
Chong Soo Lee (POSTECH)
- Author in Hydrogen charging behavior of the UNSM processed high-Mn steels
Seok-Jae Lee (Jeonbuk National University)
- Co-author in Resetting process into medium-Mn steel to recover the reduced ductility by cold working
Ulrike Lorenz (OCAS )
- Author in Advanced characterization of medium Mn steel using a combination of EPMA and EBSD
Wenjun Lu (Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China)
- Co-author in High strength medium Manganese TRIP steel with increased hydrogen resistance due to heterogeneous Mn distribution (virtual presentation)
Marina Lukas (Materials Center Leoben)
- Author in Investigation of detwinning due to cyclic tensile straining in Hadfield steel
Haiwen Luo (University of Science and Technology Beijing)
- Co-author in Revealing the austenite reversion mechanism in medium-Mn steel by innovative cyclic partial-transformation annealing
Takuya Maeda (Kyushu University)
- Author in Strain distribution in duplex martensitic medium Mn steel (virtual presentation)
Takuya Maeda (Kyushu University, Nippon Steel)
- Author in Toughening mechanism of medium Mn martensitic steel treated with thermomechanical control process and intercritical annealing-virtual presentation
Takuya Maeda (Nippon Steel)
- Author in Effect of carbon on dislocation density and hardness in ausformed medium Mn martensitic steel (virtual presentation)
Surendra Kumar Makineni (Max-Planck-Institut für Eisenforschung, Düsseldorf, Germany)
- Co-author in High strength medium Manganese TRIP steel with increased hydrogen resistance due to heterogeneous Mn distribution (virtual presentation)
Loic Malet (Université Libre de Bruxelles)
- Author in Understanding the contributions on the work-hardening of a 5 wt.% manganese quenched and partitioned steel
Marcel Mandel (Institute of Materials Engineering, TU Bergakademie Freiberg )
- Co-author in Strain-induced α´-Martensite Evolution of Fe-17Cr-8.6Mn-4Ni-0.17N Steel at different Temperatures
Carlo Mapelli (Politecnico di Milano)
- Author in Thermal treatment effect on cold rolled high Mn lightweight steels
Wendler Marco (TU Bergakademie Freiberg)
- Author in Quenching and Partitioning of Metastable Austenitic CrMnNi-Steels
- Co-author in Modeling of mechanical properties of metastable austenitic Cr-Mn-Ni steels with TRIP and TWIP effect
- Co-author in Strain-induced α´-Martensite Evolution of Fe-17Cr-8.6Mn-4Ni-0.17N Steel at different Temperatures
Marek Tkocz
- Author in Effect of the heat generated during deformation at high strain rates on the structure and properties of high manganese steels with twinning as the dominant deformation mechanism.
Takuro Masumura (Kyushu University)
- Co-author in Strain distribution in duplex martensitic medium Mn steel (virtual presentation)
Takuro Masumura (Kyushu University)
- Author in Toughening mechanism of medium Mn martensitic steel treated with thermomechanical control process and intercritical annealing-virtual presentation
Takuro Masumura (Kyushu University)
- Author in Effect of carbon on dislocation density and hardness in ausformed medium Mn martensitic steel (virtual presentation)
Mateusz Skwarski
- Author in Effect of the heat generated during deformation at high strain rates on the structure and properties of high manganese steels with twinning as the dominant deformation mechanism.
David Matlock (Colorado School of Mines)
- Author in Processing, Properties, and Microstructure Interrelationships in Medium Manganese Steels
- Co-author in Austenite Evolution and Mn Redistribution during Double Soaking
kyosuke matsuda (Kyushu University)
- Author in Toughening mechanism of medium Mn martensitic steel treated with thermomechanical control process and intercritical annealing-virtual presentation
Joseph McDermid (McMaster University)
- Author in Austenite Nucleation and Growth as a Function of Starting Microstructure in a Fe-0.15C-5.56Mn-1.1Si-1.89Al Medium-Mn Steel
- Author in Selective Oxidation and Reactive Wetting of Medium-Manganese Third-Generation Advanced High Strength Steels
Azin Mehrabi (McMaster University)
- Author in Austenite Nucleation and Growth as a Function of Starting Microstructure in a Fe-0.15C-5.56Mn-1.1Si-1.89Al Medium-Mn Steel
Lorenzo Mereghetti (Politecnico di Milano)
- Author in Thermal treatment effect on cold rolled high Mn lightweight steels
Davide Mombelli (Politecnico di Milano)
- Author in Thermal treatment effect on cold rolled high Mn lightweight steels
Mateusz Morawiec (Silesian University of Technology)
- Author in Effect of heating and cooling rates on the microstructure of a double soaked medium-manganese Al-alloyed steel
- Author in Influence of second intercritical annealing temperature on austenite grain size and its thermal stability in 5Mn steel
- Co-author in Comparison of dynamic mechanical behavior and microstructure features in thermo-mechanically rolled 3Mn-Al and 5Mn-Al sheet steels
- Co-author in Grain size evolution during intercritical annealing of 5% medium-Mn steel
S. Amir H. Motaman
- Co-author in Structure-Property Relationship in Additively Manufactured High-Manganese Steels
Josh Mueller
- Author in Austenite Evolution and Mn Redistribution during Double Soaking
- Author in Processing, Properties, and Microstructure Interrelationships in Medium Manganese Steels
Ishtiaq Muhammad (Gyeongsang national university)
- Author in Comparison of passive films formed on a high-Cr adding high-Mn steel and typical austenitic stainless steels (virtual presentation)
Sebastian Münstermann (RWTH Aachen University)
- Author in Localization, damage and fracture properties of Medium Manganese Steels
Joerg Neugebauer (MPIE)
- Author in Ab initio based investigation of the role of retained austenite in Hydrogen embrittlement of steels
John Nutter (The University of Sheffield)
- Co-author in A study of the deformation mechanisms and scaling up of a medium Mn steel with 8 wt% Mn
Uwe Ossberger (voestalpine Railway Systems GmbH)
- Co-author in Investigation of detwinning due to cyclic tensile straining in Hadfield steel
Ryusuke Oya (The graduate school of engineering, Unoversity of Hyogo)
- Author in Analysis of mechanical properties in ultrafine single variant martensite in 5-7%Mn steels by synchrotron radiation
Ítalo Oyarzabal (Université de Lorraine)
- Author in TEM characterization of stability of retained austenite in medium Mn steel under severe deformation
José Sergio Pacheco Cedeño (Tecnológico de Monterrey, campus Morelia)
- Co-author in Microstructural characterization and tensile properties of a medium Mn steel welded joint
Daniella Pallisco (McMaster University)
- Author in Selective Oxidation and Reactive Wetting of Medium-Manganese Third-Generation Advanced High Strength Steels
Jeong Min Park (Korea Institute of Materials Science)
- Author in Hydrogen charging behavior of the UNSM processed high-Mn steels
Tak Min Park (Hanyang University)
- Author in Microstructural evolution and tensile behaviour of V-added medium-Mn steel
Tak Min Park (Hanyang University)
- Co-author in Design of lightweight maraging steel
Tak Min Park (Hanyang university)
- Co-author in Novel cryogenic impact toughness of 200 J in Low-Ni martensitic steels
Tak Min Park (Hanyang University)
- Co-author in Resetting process into medium-Mn steel to recover the reduced ductility by cold working
Eunhye Park (Gyeongsang national university)
- Author in Comparison of passive films formed on a high-Cr adding high-Mn steel and typical austenitic stainless steels (virtual presentation)
Astrid Perlade (Arcelormittal Global R&D)
- Author in In situ determination of austenite mechanical stability in medium manganese steels by high energy X-ray diffraction on synchrotron beamline
- Author in In situ investigation of medium manganese microstructure formation during intercritical annealing by high energy X-ray diffraction on synchrotron beamline
- Author in Intergranular and interphase segregation in Medium Mn TRIP steels
Dustin Peterle (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)
- Author in Development of high-Mn high strength steel for electric vehicles
Roumen Petrov (Ghent University,)
- Author in Effect of heating and cooling rates on the microstructure of a double soaked medium-manganese Al-alloyed steel
- Co-author in Comparison of dynamic mechanical behavior and microstructure features in thermo-mechanically rolled 3Mn-Al and 5Mn-Al sheet steels
- Co-author in Grain size evolution during intercritical annealing of 5% medium-Mn steel
Andreas Pichler (voestalpine Stahl GmbH)
- Author in Research and development of steel grades with elevated Mn content at voestalpine and its scientific partners
Dirk Ponge (Max-Planck-Institut für Eisenforschung)
- Co-author in Grain boundary κ-carbides in high manganese lightweight steel: Degradation assessment and potential solutions (virtual presentation)
- Co-author in High strength medium Manganese TRIP steel with increased hydrogen resistance due to heterogeneous Mn distribution (virtual presentation)
- Co-author in Hydrogen associated decohesion and localized plasticity in a high-Mn austenite-ferrite lightweight steel (virtual presentation)
- Co-author in Solute Enrichment at the α/γ Phase Boundary in Medium Mn Steel (virtual presentation)
Peter Presoly (Montanuniversität Leoben)
- Author in High temperature thermodynamics of the Fe-C-Mn system; new experimental data for the Fe-C-10 and 20 wt.-% Mn system
Angela Quadfasel (Institute of Metal Forming)
- Author in Simulation of the TWIP/TRIP effect of high manganese steels in dependence of the applied stress condition
Caroline Quitzke (TU Bergakademie Freiberg, Institut für Eisen- und Stahltechnologie)
- Author in Strain-induced α´-Martensite Evolution of Fe-17Cr-8.6Mn-4Ni-0.17N Steel at different Temperatures
Dierk Raabe (Max-Planck-Institut für Eisenforschung, Düsseldorf, Germany)
- Co-author in High strength medium Manganese TRIP steel with increased hydrogen resistance due to heterogeneous Mn distribution (virtual presentation)
Dierk Raabe (Max-Planck-Institut)
- Co-author in Grain boundary κ-carbides in high manganese lightweight steel: Degradation assessment and potential solutions (virtual presentation)
- Co-author in Solute Enrichment at the α/γ Phase Boundary in Medium Mn Steel (virtual presentation)
Mark Rainforth (The Univeristy of Sheffield)
- Co-author in A study of the deformation mechanisms and scaling up of a medium Mn steel with 8 wt% Mn
Mitsuo Osvaldo Ramos Azpeitia (Facultad de Ingeniería-UASLP)
- Co-author in Microstructural characterization and tensile properties of a medium Mn steel welded joint
Mitsuo Osvaldo Ramos-Azpeitia (Universidad Autonoma de San Luis Potosi)
- Author in Mechanical integrity and microstructural changes in the welded joints of third generation automotive AHSS in as hot rolled and after post-annealing
Radhakanta Rana (Tata Steel)
- Author in Control of liquid metal embrittlement induced cracking during resistance spot welding of a medium Mn high ductile Zn-coated hot press forming steel
Gerald Ressel (Materials Center Leoben Forschung GmbH)
- Co-author in Investigation of detwinning due to cyclic tensile straining in Hadfield steel
Sabine Ritsche
- Author in Consideration of critical aspects concerning large-scale production and use in automotive applications based on an optimized alloying concept for a batch-annealed medium-Mn780 grade
Bernhard Sartory (Materials Center Leoben Forschung GmbH)
- Co-author in Investigation of detwinning due to cyclic tensile straining in Hadfield steel
Alexander Schlemminger (QuantoLux GmbH)
- Author in How fast laser OES based slag analysis enables in situ process management and thereby limits the loss of Mn into slag
Reinhold Schneider (Univ. of Appl. Sciences Upper Austria)
- Author in Consideration of critical aspects concerning large-scale production and use in automotive applications based on an optimized alloying concept for a batch-annealed medium-Mn780 grade
- Author in Research and development of steel grades with elevated Mn content at voestalpine and its scientific partners
- Co-author in Correlation between microstructure and ductility characteristics of lean medium Mn Q&P steels
- Co-author in Effect of Si and Al on retained austenite stabilization during Q&P and galvannealing process
Ronald Schnitzer (Montanuniversität Leoben)
- Author in Consideration of critical aspects concerning large-scale production and use in automotive applications based on an optimized alloying concept for a batch-annealed medium-Mn780 grade
Jürgen Schodl (CEST, Competence Centre for Electrochemical Surface Technologies)
- Author in Comparative studies of passive layers of CrMnN and CrNi austenitic steel stainless grades highlighting the effect of manganese
Christina Schröder (Institute of Iron and Steel Technology, TU Bergakademie Freiberg)
- Co-author in Strain-induced α´-Martensite Evolution of Fe-17Cr-8.6Mn-4Ni-0.17N Steel at different Temperatures
Hyun Joo Seo (POSTECH)
- Author in Hydrogen charging behavior of the UNSM processed high-Mn steels
Jae Bok Seol (Gyeongsang national university)
- Author in Comparison of passive films formed on a high-Cr adding high-Mn steel and typical austenitic stainless steels (virtual presentation)
Vladimir Shemet (Nationale Technische Universität „Kiewer Polytechnisches Institut Ihor Sikorskyj“)
- Author in Microstructure, mechanical and high temperature properties of cast high Mn and Al austenitic steels.
Xiao Shen (Steel Institute, RWTH Aachen University)
- Author in Revealing the austenite reversion mechanism in medium-Mn steel by innovative cyclic partial-transformation annealing
Fuhui Shen (RWTH Aachen University)
- Author in Localization, damage and fracture properties of Medium Manganese Steels
Hiroyuki Shirahata (Nippon Steel)
- Author in Toughening mechanism of medium Mn martensitic steel treated with thermomechanical control process and intercritical annealing-virtual presentation
Hiroyuki Shirahata (Nippon Steel)
- Co-author in Strain distribution in duplex martensitic medium Mn steel (virtual presentation)
Hiroyuki Shirahata (Nippon Steel)
- Author in Effect of carbon on dislocation density and hardness in ausformed medium Mn martensitic steel (virtual presentation)
Harpreet Sidhar (ExxonMobil Upstream Research Company)
- Author in High Manganese Steel for Mooring Chain Applications (virtual presentation)
H. Sidhar (ExxonMobil Upstream Research Company)
- Co-author in High Manganese Steels for the Oil, Gas, and Energy Industry Applications: State-of-the-art & Emerging Opportunities (virtual presentation)
Adam Skowronek (Silesian University of Technology)
- Author in Grain size evolution during intercritical annealing of 5% medium-Mn steel
Carl Slater (University of Warwick)
- Co-author in A study of the deformation mechanisms and scaling up of a medium Mn steel with 8 wt% Mn
Christof Sommitsch (Graz University of Technology)
- Co-author in Correlation between microstructure and ductility characteristics of lean medium Mn Q&P steels
- Co-author in Effect of Si and Al on retained austenite stabilization during Q&P and galvannealing process
Renbo Song (University of Science and Technology Beijing)
- Author in Achieving Short-time Annealing Toughening Through Trace Nb Addition in 4Mn steels
- Author in The effect of intercritical annealing temperature on warm-rolled medium manganese steel
Wenwen Song (Steel Institute, RWTH Aachen University)
- Author in Nano-precipitation and austenite reversion in a Cu and Ni containing medium-Mn steel
- Co-author in Revealing the austenite reversion mechanism in medium-Mn steel by innovative cyclic partial-transformation annealing
John Speer (Colorado School of Mines)
- Author in Processing, Properties, and Microstructure Interrelationships in Medium Manganese Steels
- Co-author in Austenite Evolution and Mn Redistribution during Double Soaking
KIRANBABU SRIKAKULAPU
- Co-author in Solute Enrichment at the α/γ Phase Boundary in Medium Mn Steel (virtual presentation)
Manfred Stadler
- Author in Consideration of critical aspects concerning large-scale production and use in automotive applications based on an optimized alloying concept for a batch-annealed medium-Mn780 grade
Katharina Steineder (Researcher)
- Author in Consideration of critical aspects concerning large-scale production and use in automotive applications based on an optimized alloying concept for a batch-annealed medium-Mn780 grade
- Co-author in Effect of Si and Al on retained austenite stabilization during Q&P and galvannealing process
Dong-Woo Suh (Graduate Institute of Ferrous & Energy Technology, POSTECH)
- Co-author in Microstructure and tensile properties of room temperature Q&P processed 0.25C – 4.0Mn – 1.5Si steel starting from chemically heterogeneous microstructure
Prithiv Thoudden Sukumar (Max-Planck-Institut für Eisenforschung)
- Co-author in Hydrogen associated decohesion and localized plasticity in a high-Mn austenite-ferrite lightweight steel (virtual presentation)
Binhan Sun (Max-Planck-Institut für Eisenforschung)
- Author in High strength medium Manganese TRIP steel with increased hydrogen resistance due to heterogeneous Mn distribution (virtual presentation)
- Co-author in Grain boundary κ-carbides in high manganese lightweight steel: Degradation assessment and potential solutions (virtual presentation)
- Co-author in Hydrogen associated decohesion and localized plasticity in a high-Mn austenite-ferrite lightweight steel (virtual presentation)
- Co-author in Solute Enrichment at the α/γ Phase Boundary in Medium Mn Steel (virtual presentation)
Jianlin Sun (University of Science and Technology Beijing)
- Author in Achieving Short-time Annealing Toughening Through Trace Nb Addition in 4Mn steels
Hyokyung Sung (Gyeongsang National University)
- Author in Comparison of passive films formed on a high-Cr adding high-Mn steel and typical austenitic stainless steels (virtual presentation)
Yusuke Suzuki (The graduate school of gegineering, University of Hyogo)
- Author in Analysis of mechanical properties in ultrafine single variant martensite in 5-7%Mn steels by synchrotron radiation
Faisal Waqar Syed (Max-Planck-Institut für Eisenforschung)
- Author in Solute Enrichment at the α/γ Phase Boundary in Medium Mn Steel (virtual presentation)
Ali Tehranchi (Max planck ins. for Iron research)
- Author in Ab initio based investigation of the role of retained austenite in Hydrogen embrittlement of steels
Marco Teller (Institute of Metal Forming)
- Co-author in Simulation of the TWIP/TRIP effect of high manganese steels in dependence of the applied stress condition
Thomas Titze (voestalpine Railway Systems GmbH)
- Co-author in Investigation of detwinning due to cyclic tensile straining in Hadfield steel
Shiro Torizuka (University of Hyogo)
- Author in Analysis of mechanical properties in ultrafine single variant martensite in 5-7%Mn steels by synchrotron radiation
Stephan Trattner (CEST, Competence Centre for Electrochemical Surface Technologies)
- Author in Comparative studies of passive layers of CrMnN and CrNi austenitic steel stainless grades highlighting the effect of manganese
Toshihiro Tsuchiyama (Kyushu University)
- Author in Effect of carbon on dislocation density and hardness in ausformed medium Mn martensitic steel (virtual presentation)
Toshihiro Tsuchiyama (Kyushu University)
- Co-author in Strain distribution in duplex martensitic medium Mn steel (virtual presentation)
Toshihiro Tsuchiyama (Kyushu University)
- Author in Toughening mechanism of medium Mn martensitic steel treated with thermomechanical control process and intercritical annealing-virtual presentation
Ryuji Uemori (Kyushu University)
- Author in Toughening mechanism of medium Mn martensitic steel treated with thermomechanical control process and intercritical annealing-virtual presentation
Ryuji Uemori (Kyushu University)
- Author in Effect of carbon on dislocation density and hardness in ausformed medium Mn martensitic steel (virtual presentation)
Ryuji Uemori (Kyushu University)
- Co-author in Strain distribution in duplex martensitic medium Mn steel (virtual presentation)
Ellen van der Aa (Tata Steel)
- Author in Control of liquid metal embrittlement induced cracking during resistance spot welding of a medium Mn high ductile Zn-coated hot press forming steel
Neerav Verma (Formerly of ExxonMobil Upstream Research Company)
- Author in High Manganese Steel for Mooring Chain Applications (virtual presentation)
Giacomo Villa (Politecnico di Milano)
- Author in Thermal treatment effect on cold rolled high Mn lightweight steels
Olena Volkova (Institute of Iron and Steel Technology, TU Bergakademie Freiberg)
- Co-author in Strain-induced α´-Martensite Evolution of Fe-17Cr-8.6Mn-4Ni-0.17N Steel at different Temperatures
Olena Volkova
- Co-author in Modeling of mechanical properties of metastable austenitic Cr-Mn-Ni steels with TRIP and TWIP effect
- Co-author in Quenching and Partitioning of Metastable Austenitic CrMnNi-Steels
Matthias Wallner
- Author in Effect of Si and Al on retained austenite stabilization during Q&P and galvannealing process
Di Wan (Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, Trondheim, Norway)
- Co-author in High strength medium Manganese TRIP steel with increased hydrogen resistance due to heterogeneous Mn distribution (virtual presentation)
Yongjin Wang (University of Science and Technology Beijing)
- Author in Achieving Short-time Annealing Toughening Through Trace Nb Addition in 4Mn steels
Hesong Wang (Northeastern University)
- Author in Localization, damage and fracture properties of Medium Manganese Steels
Yongjin Wang (University of Science and Technology Beijing)
- Co-author in The effect of intercritical annealing temperature on warm-rolled medium manganese steel
Tom Waterschoot (Arcelormittal Global R&D Gent)
- Author in Advanced characterization of medium Mn steel using a combination of EPMA and EBSD
- Author in Using high speed camera to understand edge cracking during hot rolling of lightweight Fe-Mn-Al-C steels
Sebastian Wesselmecking
- Author in Applicability improvement by deformation mechanism-controlled rolling of high manganese steels
Sebastian Wesselmecking (Steel Institute of RWTH Aachen University)
- Author in Effect of Nitrogen and Grain Size on Mechanical Properties of High Manganese TWIP Steels
- Co-author in The potential of Q&P-Treated Medium Manganese Steels for Press-Hardening Applications
Chun-Hung Wu (Max-Planck-Institut für Eisenforschung, Düsseldorf, Germany)
- Co-author in High strength medium Manganese TRIP steel with increased hydrogen resistance due to heterogeneous Mn distribution (virtual presentation)
Zigan Xu (RWTH Aachen University)
- Author in Nano-precipitation and austenite reversion in a Cu and Ni containing medium-Mn steel
Xin Xu (Imperial College London)
- Co-author in A study of the deformation mechanisms and scaling up of a medium Mn steel with 8 wt% Mn
Wei Xu (ExxonMobil Upstream Research Company)
- Author in High Manganese Steel for Mooring Chain Applications (virtual presentation)
Xin Yue (Formerly of ExxonMobil Upstream Research Company)
- Author in High Manganese Steel for Mooring Chain Applications (virtual presentation)
Javier Issac Zapot Cervantes (Universidad Autonoma de San Luis Potosi)
- Author in Mechanical integrity and microstructural changes in the welded joints of third generation automotive AHSS in as hot rolled and after post-annealing
Javier Isaac Zapot Cervantes (Instituto de Metalurgía-UASLP)
- Co-author in Microstructural characterization and tensile properties of a medium Mn steel welded joint
Yingchao Zhang (University of Science and Technology Beijing)
- Author in Achieving Short-time Annealing Toughening Through Trace Nb Addition in 4Mn steels
Yingchao Zhang
- Author in The effect of intercritical annealing temperature on warm-rolled medium manganese steel
Shuai Zhao (University of Science and Technology Beijing)
- Co-author in The effect of intercritical annealing temperature on warm-rolled medium manganese steel
Shuai Zhao (University of Science and Technology Beijing)
- Author in Achieving Short-time Annealing Toughening Through Trace Nb Addition in 4Mn steels
Xuyang Zhou (Max-Planck-Institut für Eisenforschung)
- Co-author in Grain boundary κ-carbides in high manganese lightweight steel: Degradation assessment and potential solutions (virtual presentation)
Kangying Zhu (Arcelormittal Global R&D)
- Author in In situ determination of austenite mechanical stability in medium manganese steels by high energy X-ray diffraction on synchrotron beamline
- Author in In situ investigation of medium manganese microstructure formation during intercritical annealing by high energy X-ray diffraction on synchrotron beamline
- Author in Intergranular and interphase segregation in Medium Mn TRIP steels
Hatem Zurob (McMaster University)
- Author in Austenite Nucleation and Growth as a Function of Starting Microstructure in a Fe-0.15C-5.56Mn-1.1Si-1.89Al Medium-Mn Steel