12th Tooling Conference & Exhibition - Tooling 2022

Name: 12th Tooling Conference & Exhibition - Tooling 2022
Start: 2022-04-25T09:00:00+02:00
End: 2022-04-27T19:00:00+02:00
Location: Conventum Conference Center

25–27 Apr 2022

Conventum Conference Center

Europe/Vienna timezone

Conference Secretary

Author List

Michael Aigner
- Co-author in Influence of carbide types and amounts on the wear of graphite-containing alloys for work rolls
Silvio Alano (ESI South America)
- Co-author in Specification of a die demonstrator for automotive class A surfaces
Mirko Albrecht
- Co-author in Wear behavior of roller-burnished high interstitial austenitic stainless steel parts in glass-reinforced plastic melt
Sasan Amirabdollahian (University of Trento)
- Author in Characterization and heat treatment of an additively manufactured tool steel fabricated by laser metal deposition
- Author in Effect of different post-processing thermal treatments on the mechanical properties and tempering resistance of additively manufactured H13 hot work tool steel
- Co-author in Thermal fatigue behaviour of AISI H13 hot work tool steel produced by Direct Laser Metal Deposition
Kristian Arntz
- Co-author in Ontology for heterogeneous manufacturing technologies in tooling
Mikael Åsberg (Karlstad University)
- Author in Influence of post treatment on wear performance of E-PBF high-alloy (Cr-Mo-V) cold work tool steel
Nader Asnafi (Örebro University)
- Co-author in A knowledge based framework to design and analyze metal working die using image processing technique
Pedro Luis Bacelar dos Santos (Universidade de São Paulo)
- Co-author in Fixture devices monitoring to machining condition optimization
Edu Back (Renault Brazil)
- Co-author in Specification of a die demonstrator for automotive class A surfaces
Matteo Benedetti (University of Trento, Dpt. Industrial Engineering)
- Author in Effect of different post-processing thermal treatments on the mechanical properties and tempering resistance of additively manufactured H13 hot work tool steel
Santiago Benito
- Co-author in Short-term heat treatment of the high-alloy cold-work tool steel X153CrMoV12: Calculation of metastable microstructural states
Mirnes Berbic (ÖGI)
- Co-author in Overall performance comparison of conventional and printed Böhler W360 for high pressure die casting
Thomas Bergs
- Co-author in Ontology for heterogeneous manufacturing technologies in tooling
Christian Bernhard (Montanuniversitaet Leoben)
- Co-author in Primary carbide formation in complex tool steels - potential of selected laboratory methods for the generation of thermodynamic data
Alexander Bezold (RWTH Aachen University - Chair and Institute for Materials Applications in Mechanical Engineering)
- Co-author in Influence of plasma-nitriding on the fatigue strength of carbide-rich tool steels
- Co-author in Influences of manufacturing-related microstructural variations on fatigue in carbide-rich tool steels
Ravi Bhatt (Department of Mechanical Engineering, Chhotubhai Gopalbhai Patel Institute of Technology (CGPIT), Uka Tarsadia University, Bardoli, Surat-394350, Gujarat, India)
- Co-author in A knowledge based framework to design and analyze metal working die using image processing technique
Mallika Bhatt
- Author in A knowledge based framework to design and analyze metal working die using image processing technique
Sara Biamino (Politecnico di Torino)
- Author in Characterization of an AISI H13 hot-work tool steel produced by Electron Beam Melting
Benedikt Blitz (SMR Premium GmbH)
- Author in What's ahead for remelted tool steels and update on PM & AM tool steels
Johannes Boes (Ruhr University Bochum)
- Author in Microstructure and properties of a novel carbon-martensitic hot work tool steel processed by Laser Additive Manufacturing without preheating
Paolo Bosetti (University of Trento)
- Author in Characterization and heat treatment of an additively manufactured tool steel fabricated by laser metal deposition
- Author in Effect of different post-processing thermal treatments on the mechanical properties and tempering resistance of additively manufactured H13 hot work tool steel
Paolo Bosetti
- Author in Direct laser metal deposition of H13 tool steel on Cu-Be alloy substrate for tooling applications
Horst Bramann (MAGMA Foundry Technology Ltd.)
- Co-author in Highly efficient temperature control systems in AM tool segments for die-casting
Dominik Brandl (Materials Center Leoben Forschung GmbH)
- Author in Characterization methods for mechanical properties and microstructural changes of tool materials at elevated temperatures
Gunnar Broberg
- Co-author in Increased service life of a plastic injection mold by using additive manufacturing.
Christoph Broeckmann (Institut für Werkstoffanwendungen im Maschinenbau / RWTH Aachen)
- Author in Resistance against abrasive wear and corrosion of a laser powder bed alloyed high chromium tool steel
- Co-author in Improving fatigue strength of laser powder bed fused AISI M3:2 by hot isostatic pressing
- Co-author in Influence of plasma-nitriding on the fatigue strength of carbide-rich tool steels
- Co-author in Influences of manufacturing-related microstructural variations on fatigue in carbide-rich tool steels
Daniel Byong (Universidade Federal do ABC)
- Co-author in Fixture devices monitoring to machining condition optimization
Thiago Cannabrava de Sousa (Universidade Federal do ABC)
- Co-author in Fixture devices monitoring to machining condition optimization
Fernando Carneiro (Department of Mechanical Engineering, Instituto Tecnológico de Aeronáutica (ITA))
- Author in Virtual tryout assessment for the evaluation of precision of dimensional prediction of stamping parts
Ianis Charleux (ArcelorMittal)
- Co-author in The role of microstructure on the properties of martensitic stainless steels used for plastic mould applications
Bogdan Chetroiu (Suzuki Garphyttan AB)
- Co-author in Additively manufactured conformal cooling tool holder for wire drawing uti- lizing triply periodic minimal surfaces
Aline Conceição Matheus (Technological Institute of Aeronautics - ITA)
- Co-author in Specification of a die demonstrator for automotive class A surfaces
Janosch Conrads (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG )
- Co-author in Plasma-nitriding of a high manganese austenitic steel for additive manufacturing
Ross Crowley (Marquette University)
- Co-author in Deformation behavior of directional die surface textures in warm and hot working
Tammo Dannen
- Co-author in Ontology for heterogeneous manufacturing technologies in tooling
Natalia Davila (Andrea Moreira da Costa e Jairo D'Ávila)
- Author in Specification of a die demonstrator for automotive class A surfaces
Alfredo de Faria (Department of Mechanical Engineering, Instituto Tecnológico de Aeronáutica (ITA))
- Co-author in Specification of a die demonstrator for automotive class A surfaces
- Co-author in Virtual tryout assessment for the evaluation of precision of dimensional prediction of stamping parts
André de Lima (Department of Mechanical Engineering, Instituto Tecnológico de Aeronáutica (ITA))
- Co-author in Virtual tryout assessment for the evaluation of precision of dimensional prediction of stamping parts
Peter Demmel (MAN Truck & Bus AG)
- Author in On the sensitivity of a tool-workpiece-thermocouple to material properties
Willian de Oliveira (UTFPR Campus Ponta Grossa)
- Co-author in Analysis of AISI H13 for high pressure die casting and its recovery via thermal spray process.
- Co-author in Plasma nitriding of H13 tool steel surfaces for improved thermal fatigue resistance of die-casting molds
Eduardo de Senzi Zancul (Universidade de São Paulo)
- Author in Fixture devices monitoring to machining condition optimization
Gelson de Souza (State University of Ponta Grossa)
- Co-author in Plasma nitriding of H13 tool steel surfaces for improved thermal fatigue resistance of die-casting molds
Arnaud Dimet (Erasteel)
- Co-author in Catalysts and batteries recycling to produce ferro-alloys and high-speed steel
Joseph Domblesky (Marquette University)
- Author in Deformation behavior of directional die surface textures in warm and hot working
- Author in Finite Element Simulation of Hot Compression Tools Having an Anisotropic Surface Texture
André Dorigueto Canal (Technological Institute of Aeronautics - ITA)
- Co-author in Specification of a die demonstrator for automotive class A surfaces
Jean-Pierre Dufour (Erasteel)
- Author in Catalysts and batteries recycling to produce ferro-alloys and high-speed steel
Reinhold Ebner (Materials Center Leoben Forschung GmbH)
- Author in Characterization methods for mechanical properties and microstructural changes of tool materials at elevated temperatures
Philippe Egea (Aubert&Duval)
- Author in Pearl®Micro TS700 powder for additive manufacturing of die casting tooling
Florian Eibl (Aconity3D)
- Author in Additive manufacturing of tool steels
Sebastian Ejnermark (Uddeholms AB)
- Co-author in Effects of Carbide Morphology on the Mechanical Properties of Cr-Mo-V Cold Work Powder Metallurgical Tool Steel
Enghag Erik (Suzuki Garphyttan AB)
- Co-author in Additively manufactured conformal cooling tool holder for wire drawing uti- lizing triply periodic minimal surfaces
Christoph Escher (Dörrenberg Edelstahl GmbH)
- Co-author in Hybrid, additive manufacturing of complex forming tools using Binder Jetting and Laser Metal Deposition
- Co-author in Microstructure and properties of a novel carbon-martensitic hot work tool steel processed by Laser Additive Manufacturing without preheating
Ulrika Fager
- Co-author in Increased service life of a plastic injection mold by using additive manufacturing.
Hipólito Fals (UTFPR Ponta Grossa Campus)
- Co-author in Analysis of AISI H13 for high pressure die casting and its recovery via thermal spray process.
Deirmina Faraz (Sandvik Additive Manufacturing)
- Author in Effect of different post-processing thermal treatments on the mechanical properties and tempering resistance of additively manufactured H13 hot work tool steel
Felipe Fellipe
- Author in Fixture devices monitoring to machining condition optimization
Jean Firmino (Toyota do Brasil)
- Co-author in Specification of a die demonstrator for automotive class A surfaces
Martina Fischbacher
- Co-author in Influence of carbide types and amounts on the wear of graphite-containing alloys for work rolls
Erik Forke
- Author in Wear behavior of roller-burnished high interstitial austenitic stainless steel parts in glass-reinforced plastic melt
Simon Frank (AIT Austrian Institute of Technology, LKR Leichtmetallkompetenzzentrum Ranshofen GmbH)
- Author in Active inserts, a plug and play solution for increasing mechanical properties and reducing porosity in LPDC-ed parts
Fabrício Frazão (Universidade Federal do ABC)
- Co-author in Fixture devices monitoring to machining condition optimization
Daniel Frie (Deutsche Edelstahlwerke Sales GmbH & Co. KG )
- Co-author in Stainless steels for plastic mold frames featuring enhanced machinability
Walter Friesenbichler (Institute of Injection Molding of Polymers, Montanuniversität Leoben, Austria)
- Co-author in Hardness loss of plastic mold steels: Phenomenon in injection molding
Federico Garcia-Bragado (voestalpine)
- Co-author in Active inserts, a plug and play solution for increasing mechanical properties and reducing porosity in LPDC-ed parts
Michael Gehde
- Co-author in Wear behavior of roller-burnished high interstitial austenitic stainless steel parts in glass-reinforced plastic melt
Siegfried Gelder (voestalpine Böhler Edelstahl)
- Co-author in Effect of the slag composition on the process behavior, energy consumption and non-metallic inclusions during electro-slag-remelting
Bernhard Gerstl (Montanuniversitaet Leoben, Chair of Ferrous Metallurgy)
- Co-author in Primary carbide formation in complex tool steels - potential of selected laboratory methods for the generation of thermodynamic data
Mohammad Gharbi
- Co-author in Effect of tooling temperature on the transient lubricant behaviour in hot metal forming processes
Cristian Ghibaudo (Politecnico di Torino)
- Author in Characterization of an AISI H13 hot-work tool steel produced by Electron Beam Melting
Anderson G. M. Pukasiewicz (Federal Technology University – Paraná)
- Co-author in Analysis of the machining process in HVOF coating for Aluminum Die Casting Mold
Stefan Gneiger (AIT Austrian Institute of Technology, LKR Leichtmetallkompetenzzentrum Ranshofen GmbH)
- Co-author in Active inserts, a plug and play solution for increasing mechanical properties and reducing porosity in LPDC-ed parts
Federico Simone Gobber (Politecnico di Torino)
- Author in Characterization of an AISI H13 hot-work tool steel produced by Electron Beam Melting
Matthias Golle (Pforzheim University)
- Author in On the sensitivity of a tool-workpiece-thermocouple to material properties
Rudolf Gradinger (1LKR Light Metals Technologies GmbH, Austrian Institute of Technology)
- Co-author in Active inserts, a plug and play solution for increasing mechanical properties and reducing porosity in LPDC-ed parts
Boris Gschöpf (b) Department of Materials Science, Montanuniversität Leoben, Austria)
- Co-author in Hardness loss of plastic mold steels: Phenomenon in injection molding
Reinhold Gschwandtner (2Österreichische Gießerei-Institut (ÖGI), Leoben, Austria)
- Co-author in Overall performance comparison of conventional and printed Böhler W360 for high pressure die casting
Alfred Hackl (voestalpine BÖHLER Edelstahl GmbH & Co KG)
- Author in On the sensitivity of a tool-workpiece-thermocouple to material properties
Susanne Hahn (Primetals Technologies Austria GmbH)
- Co-author in Primary carbide formation in complex tool steels - potential of selected laboratory methods for the generation of thermodynamic data
Isabel Hahn
- Author in Novel development of an NbC-containing powder metallurgical martensitic steel with outstanding tribocorrosion resistance
Goetz Hartmann (MAGMA)
- Author in Highly efficient temperature control systems in AM tool segments for die-casting
Lukas Henke (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)
- Co-author in Stainless steels for plastic mold frames featuring enhanced machinability
Pascal Henry (ArcelorMittal)
- Co-author in The role of microstructure on the properties of martensitic stainless steels used for plastic mould applications
Simone Herzog (IWM, RWTH Aachen University)
- Author in Resistance against abrasive wear and corrosion of a laser powder bed alloyed high chromium tool steel
- Co-author in Improving fatigue strength of laser powder bed fused AISI M3:2 by hot isostatic pressing
Andreas Hetzel (Institute of Manufacturing Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg)
- Author in Investigation on a quasi-incremental tool concept to manufacture functional components with sheet thickness gradient
Horst Hill (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)
- Author in Additive manufacturing of a high-carbon tool steel powder
- Co-author in New wear and temperature resistant Co-based Metal Matrix Composites for tooling applications
- Co-author in Plasma-nitriding of a high manganese austenitic steel for additive manufacturing
Karlheinz Hoeren (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG )
- Co-author in Plasma-nitriding of a high manganese austenitic steel for additive manufacturing
Karlheinz Hoeren (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)
- Co-author in Additive manufacturing of a high-carbon tool steel powder
Peter Hofer (Österreichische Gießerei-Institut (ÖGI), Leoben, Austria)
- Co-author in Overall performance comparison of conventional and printed Böhler W360 for high pressure die casting
Berne Högman (Uddeholms AB)
- Co-author in Industrialization of electron beam additive manufacturing process for tooling applications – A study on the process chain, productivity, quality and performance
Jakub Hornik (Czech Technical University in Prague)
- Co-author in Dry sliding tribological behaviour of cryotreated Cr-V ledeburitic tool steel against CuSn6 counterpart
Ugo Ibusuki (Universidade Federal do ABC)
- Author in Fixture devices monitoring to machining condition optimization
Solmar I Chagas (Federal Technology University – Paraná)
- Author in Analysis of the machining process in HVOF coating for Aluminum Die Casting Mold
Matic Jovicevic-Klug (Institute of Metals and Technology)
- Co-author in Altering tribological properties of tools steel through deep cryogenic treatment utilization
Patricia Jovicevic-Klug (Institute of Metals and Technology)
- Co-author in Altering tribological properties of tools steel through deep cryogenic treatment utilization
Peter Jurci (Slovak University of Technology, Faculty of Materials Technology based in Trnava)
- Co-author in Dry sliding tribological behaviour of cryotreated Cr-V ledeburitic tool steel against CuSn6 counterpart
Peter Jurči (Slovak University of Technology)
- Author in Cryogenic treatment as a way to optimalize the hardness-toughness relation for cold work tool steels
Anke Kaletsch (IWM, RWTH Aachen University)
- Author in Resistance against abrasive wear and corrosion of a laser powder bed alloyed high chromium tool steel
- Co-author in Improving fatigue strength of laser powder bed fused AISI M3:2 by hot isostatic pressing
Gert Kellezi
- Co-author in Retained austenite in tool steels - how heat treatment of tool steels effects retained austenite and tool performance
Lukas Kiessling (LKR Light Metals Technologies GmbH, Austrian Institute of Technology)
- Co-author in Active inserts, a plug and play solution for increasing mechanical properties and reducing porosity in LPDC-ed parts
Philipp Kluge (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)
- Co-author in Additive manufacturing of a high-carbon tool steel powder
Philipp Kluge
- Author in New wear and temperature resistant Co-based Metal Matrix Composites for tooling applications
Thomas Klünsner (Materials Center Leoben Forschung GmbH)
- Author in Characterization methods for mechanical properties and microstructural changes of tool materials at elevated temperatures
Marie Luise Köhler (Institute for Materials Application in Mechanical Engineering at RWTH Aachen University)
- Author in Resistance against abrasive wear and corrosion of a laser powder bed alloyed high chromium tool steel
Felix Kolpak (Institute of Forming Technology and Lightweight Components)
- Co-author in Manufacturing of integrated cooling channels by directed energy deposition for hot stamping tools with ball burnished surfaces
Anna Komodromos (Institute of Forming Technology and Lightweight Components)
- Author in Manufacturing of integrated cooling channels by directed energy deposition for hot stamping tools with ball burnished surfaces
Pavel Krakhmalev (Karlstad University)
- Author in Influence of post treatment on wear performance of E-PBF high-alloy (Cr-Mo-V) cold work tool steel
Verena Kräusel
- Co-author in Wear behavior of roller-burnished high interstitial austenitic stainless steel parts in glass-reinforced plastic melt
Simona Kresser (University of Applied Sciences Upper Austria)
- Author in Influence of partitioning effects on the retained austenite content and properties of a martensitic stainless steel
Hans-Günter Krull (Deutsche Edelstahlwerke Specialty Steel GmbH & Co KG)
- Author in Additive manufacturing of tool steels
- Author in Hot working tool steel with bainitic microstructure
Hans-Günter Krull (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)
- Co-author in Additive manufacturing of a high-carbon tool steel powder
Andreas Landefeld (Department of Materials Science, Montanuniversität Leoben, Austria)
- Co-author in Hardness loss of plastic mold steels: Phenomenon in injection molding
Joakim Larsson (Örebro University)
- Author in Additively manufactured conformal cooling tool holder for wire drawing uti- lizing triply periodic minimal surfaces
- Co-author in Surface degradation and wear mechanisms of uncoated and PVD-coated cemented carbide dies in steel wire drawing
Ingrun Laubbichler (Eisenwerk Sulzau-Werfen, R. & E. Weinberger AG)
- Co-author in Influence of carbide types and amounts on the wear of graphite-containing alloys for work rolls
Perrine Lavalley (ArcelorMittal)
- Co-author in The role of microstructure on the properties of martensitic stainless steels used for plastic mould applications
Michael Lechner (Institute of Manufacturing Technology / Friedrich-Alexander-Universität Erlangen-Nürnberg)
- Co-author in Investigation on a quasi-incremental tool concept to manufacture functional components with sheet thickness gradient
Michael Lechner
- Co-author in Versatile tool design for a tumbling self-piercing riveting process
Harald Leitner (voestalpine BÖHLER Edelstahl GmbH & Co KG)
- Author in Influence of particle size on the thermodynamic stability of TiC particulates in a solid-state consolidated heat-treatable steel
- Author in On the sensitivity of a tool-workpiece-thermocouple to material properties
Stefan Leuders (oestalpine Additive Manufacturing Center GmbH,)
- Co-author in Active inserts, a plug and play solution for increasing mechanical properties and reducing porosity in LPDC-ed parts
Heli Liu (Imperial College London)
- Co-author in Effect of tooling temperature on the transient lubricant behaviour in hot metal forming processes
Luciano Lourençato (UTFPR Ponta Grossa Campus)
- Co-author in Analysis of AISI H13 for high pressure die casting and its recovery via thermal spray process.
Milton L. Polli (Federal Technology University – Paraná)
- Co-author in Analysis of the machining process in HVOF coating for Aluminum Die Casting Mold
Kathrin Maier (Materials Center Leoben Forschung GmbH)
- Author in Characterization methods for mechanical properties and microstructural changes of tool materials at elevated temperatures
Giulio Marchese (Politecnico di Torino)
- Author in Characterization of an AISI H13 hot-work tool steel produced by Electron Beam Melting
Stefan Marsoner (Materials Center Leoben Forschung GmbH)
- Author in Characterization methods for mechanical properties and microstructural changes of tool materials at elevated temperatures
- Author in Influence of particle size on the thermodynamic stability of TiC particulates in a solid-state consolidated heat-treatable steel
Daniel Massignani (University of Trento)
- Co-author in Thermal fatigue behaviour of AISI H13 hot work tool steel produced by Direct Laser Metal Deposition
Adilson Matias (General Motors – GM)
- Co-author in Specification of a die demonstrator for automotive class A surfaces
André Mayer (UTFPR Campus Ponta Grossa)
- Author in Analysis of AISI H13 for high pressure die casting and its recovery via thermal spray process.
- Co-author in Plasma nitriding of H13 tool steel surfaces for improved thermal fatigue resistance of die-casting molds
Charlotte Mayer (Aubert&Duval)
- Author in Pearl®Micro TS700 powder for additive manufacturing of die casting tooling
Johann Mayerhofer
- Co-author in Retained austenite in tool steels - how heat treatment of tool steels effects retained austenite and tool performance
Cláudio Meneses (Universidade Federal do ABC)
- Co-author in Fixture devices monitoring to machining condition optimization
Marion Merklein (Institute of Manufacturing Technology / Friedrich-Alexander-Universität Erlangen-Nürnberg)
- Co-author in Experimental and numerical analysis of cold formed multi pin structures using a multi-acting tool design
- Co-author in Investigation on a quasi-incremental tool concept to manufacture functional components with sheet thickness gradient
Rickmer Meya (Institute of Forming Technology and Lightweight Components)
- Co-author in Manufacturing of integrated cooling channels by directed energy deposition for hot stamping tools with ball burnished surfaces
Mozammel Mia (Department of Mechanical Engineering, Imperial College London, London, UK)
- Author in Abrasive wear mechanism based interactive friction model for machining
James Miller (Scientific Forming Technologies Corp.)
- Author in Finite Element Simulation of Hot Compression Tools Having an Anisotropic Surface Texture
Andreas Mohr (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)
- Author in Plasma-nitriding of a high manganese austenitic steel for additive manufacturing
Alberto Molinari (University of Trento)
- Author in Characterization and heat treatment of an additively manufactured tool steel fabricated by laser metal deposition
- Author in Effect of different post-processing thermal treatments on the mechanical properties and tempering resistance of additively manufactured H13 hot work tool steel
Stefan Müller
- Co-author in Short-term heat treatment of the high-alloy cold-work tool steel X153CrMoV12: Calculation of metastable microstructural states
Christian Mutke (Dörrenberg Edelstahl GmbH)
- Author in Hybrid, additive manufacturing of complex forming tools using Binder Jetting and Laser Metal Deposition
- Co-author in Microstructure and properties of a novel carbon-martensitic hot work tool steel processed by Laser Additive Manufacturing without preheating
Thomas Nerzak (SMS group GmbH)
- Author in Additive manufacturing of tool steels
Manuela Neuenfeldt
- Co-author in Stainless steels for plastic mold frames featuring enhanced machinability
Ernst Neunteufl (LKR Light Metals Technologies GmbH, Austrian Institute of Technology)
- Co-author in Active inserts, a plug and play solution for increasing mechanical properties and reducing porosity in LPDC-ed parts
Philipp Niederhofer
- Author in Stainless steels for plastic mold frames featuring enhanced machinability
- Co-author in Hot working tool steel with bainitic microstructure
- Co-author in Wear behavior of roller-burnished high interstitial austenitic stainless steel parts in glass-reinforced plastic melt
Christoph Oberroither
- Author in Retained austenite in tool steels - how heat treatment of tool steels effects retained austenite and tool performance
Miloslav Ognianov (voestalpine Böhler Edelstahl GmbH & Co KG)
- Author in Overall performance comparison of conventional and printed Böhler W360 for high pressure die casting
Christos Oikonomou (Uddeholms AB)
- Author in Industrialization of electron beam additive manufacturing process for tooling applications – A study on the process chain, productivity, quality and performance
- Author in Influence of post treatment on wear performance of E-PBF high-alloy (Cr-Mo-V) cold work tool steel
Mikael Olsson (Dalarna University)
- Co-author in Surface degradation and wear mechanisms of uncoated and PVD-coated cemented carbide dies in steel wire drawing
Armin Paar
- Author in Influence of carbide types and amounts on the wear of graphite-containing alloys for work rolls
Denis Paezane (Volkswagen Brazil)
- Co-author in Specification of a die demonstrator for automotive class A surfaces
Felix Pastors (Aconity3D)
- Author in Additive manufacturing of tool steels
Massimo Pellizzari (University of Trento, Dpt. Industrial Engineering)
- Author in Effect of different post-processing thermal treatments on the mechanical properties and tempering resistance of additively manufactured H13 hot work tool steel
- Author in Thermal fatigue behaviour of AISI H13 hot work tool steel produced by Direct Laser Metal Deposition
Massimo Pellizzari
- Author in Direct laser metal deposition of H13 tool steel on Cu-Be alloy substrate for tooling applications
Matteo Perini (ProM facility, Trentino Sviluppo)
- Author in Characterization and heat treatment of an additively manufactured tool steel fabricated by laser metal deposition
Matteo Perini
- Author in Direct laser metal deposition of H13 tool steel on Cu-Be alloy substrate for tooling applications
Philip Pichler (Materials Center Leoben Forschung GmbH)
- Author in Characterization methods for mechanical properties and microstructural changes of tool materials at elevated temperatures
Pedro Pires Sulzer (Universidade de São Paulo)
- Co-author in Fixture devices monitoring to machining condition optimization
Bojan Podgornik (Institute of Metals and Technology)
- Author in Altering tribological properties of tools steel through deep cryogenic treatment utilization
Denis J. Politis (Department of Mechanical and Manufacturing Engineering, University of Cyprus, Nicosia, 1678, Cyprus)
- Co-author in Abrasive wear mechanism based interactive friction model for machining
Denis Politis
- Co-author in Effect of tooling temperature on the transient lubricant behaviour in hot metal forming processes
Josef Pörnbacher (XARION Laser Acoustics GmbH)
- Author in Influence of particle size on the thermodynamic stability of TiC particulates in a solid-state consolidated heat-treatable steel
Enrico Prati (B.A. Bonomi Acciai S.r.l)
- Co-author in New wear and temperature resistant Co-based Metal Matrix Composites for tooling applications
Peter Presoly (Montanuniversität Leoben)
- Author in Primary carbide formation in complex tool steels - potential of selected laboratory methods for the generation of thermodynamic data
Marcel Prümmer
- Co-author in Ontology for heterogeneous manufacturing technologies in tooling
ANDERSON PUKASIEWICZ (UTFPR Ponta Grossa Campus)
- Co-author in Analysis of AISI H13 for high pressure die casting and its recovery via thermal spray process.
- Co-author in Plasma nitriding of H13 tool steel surfaces for improved thermal fatigue resistance of die-casting molds
Siyuan Qin (IWM, RWTH Aachen University)
- Author in Improving fatigue strength of laser powder bed fused AISI M3:2 by hot isostatic pressing
David Quidort (ArcelorMittal)
- Author in The role of microstructure on the properties of martensitic stainless steels used for plastic mould applications
Felix Radtke (Institute for Materials Application in Mechanical Engineering at RWTH Aachen University)
- Author in Resistance against abrasive wear and corrosion of a laser powder bed alloyed high chromium tool steel
Nicklas Reis (Eratseel Kloster AB)
- Author in Effect of cleanliness on fatigue resistance of PM-HSS
Gerhard Reiter (voestalpine Böhler Edelstahl)
- Co-author in Effect of the slag composition on the process behavior, energy consumption and non-metallic inclusions during electro-slag-remelting
Gerald Ressel (Materials Center Leoben Forschung GmbH)
- Author in Influence of particle size on the thermodynamic stability of TiC particulates in a solid-state consolidated heat-treatable steel
Svenja Richert (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)
- Author in Additive manufacturing of tool steels
- Co-author in Additive manufacturing of a high-carbon tool steel powder
Philippe Rocabois (Erasteel)
- Co-author in Catalysts and batteries recycling to produce ferro-alloys and high-speed steel
David Römisch (Institute of Manufacturing Technology)
- Author in Experimental and numerical analysis of cold formed multi pin structures using a multi-acting tool design
Arne Röttger (Bergische Universität Wuppertal, Lehrstuhl für Neue Fertigungstechnologien und Werkstoffe)
- Co-author in Microstructure and properties of a novel carbon-martensitic hot work tool steel processed by Laser Additive Manufacturing without preheating
Jasmin Saewe (Fraunhofer Institut für Lasertechnik)
- Author in Additive manufacturing of tool steels
Cristiane Sales Gonçalves
- Co-author in Analysis of AISI H13 for high pressure die casting and its recovery via thermal spray process.
Bernhard Sartory (Materials Center Leoben Forschung GmbH)
- Author in Characterization methods for mechanical properties and microstructural changes of tool materials at elevated temperatures
Péricles S. Cancian (Federal Technology University – Paraná)
- Co-author in Analysis of the machining process in HVOF coating for Aluminum Die Casting Mold
Reinhold Schneider (Univ. of Appl. Sciences Upper Austria)
- Author in Effect of the slag composition on the process behavior, energy consumption and non-metallic inclusions during electro-slag-remelting
- Co-author in Influence of partitioning effects on the retained austenite content and properties of a martensitic stainless steel
Till Schneiders (Deutsche Edelstahlwerke Specialty Steel GmbH & Co KG)
- Co-author in Hot working tool steel with bainitic microstructure
Ronald Schnitzer (Montanuniversität Leoben)
- Co-author in Hardness loss of plastic mold steels: Phenomenon in injection molding
Lennart Scholl (RWTH Aachen University)
- Author in Influence of plasma-nitriding on the fatigue strength of carbide-rich tool steels
- Author in Influences of manufacturing-related microstructural variations on fatigue in carbide-rich tool steels
Jannik Schuppener
- Author in Short-term heat treatment of the high-alloy cold-work tool steel X153CrMoV12: Calculation of metastable microstructural states
Klaus Schützer (Universidade do ABC)
- Author in Fixture devices monitoring to machining condition optimization
André Schwanz de Lima (Technological Institute of Aeronautics - ITA)
- Co-author in Specification of a die demonstrator for automotive class A surfaces
AYDIN SELTE (Uddeholms AB)
- Author in Effects of Carbide Morphology on the Mechanical Properties of Cr-Mo-V Cold Work Powder Metallurgical Tool Steel
- Co-author in Industrialization of electron beam additive manufacturing process for tooling applications – A study on the process chain, productivity, quality and performance
Francisco Serbena (UEPG)
- Co-author in Plasma nitriding of H13 tool steel surfaces for improved thermal fatigue resistance of die-casting molds
Huifeng Shi (Department of Mechanical Engineering Imperial College London)
- Co-author in Effect of tooling temperature on the transient lubricant behaviour in hot metal forming processes
Huifeng Shi
- Co-author in Abrasive wear mechanism based interactive friction model for machining
Sabine Siebert (Ruhr-Universität Bochum, Lehrstuhl Werkstofftechnik)
- Co-author in Novel development of an NbC-containing powder metallurgical martensitic steel with outstanding tribocorrosion resistance
Jose Silva (Gestamp Brazil)
- Co-author in Specification of a die demonstrator for automotive class A surfaces
johnny Sjöström
- Author in Increased service life of a plastic injection mold by using additive manufacturing.
Saulo Soares (FCA Fiat Chrysler Automoveis Brazil)
- Co-author in Specification of a die demonstrator for automotive class A surfaces
Christof Sommitsch (Graz University of Technology)
- Co-author in Influence of partitioning effects on the retained austenite content and properties of a martensitic stainless steel
Emil Strandh (Swerim AB)
- Author in Influence of post treatment on wear performance of E-PBF high-alloy (Cr-Mo-V) cold work tool steel
Stefan Sundin
- Author in Effect of cleanliness on fatigue resistance of PM-HSS
Kumar Babu Surreddi (Dalarna University)
- Author in Surface degradation and wear mechanisms of uncoated and PVD-coated cemented carbide dies in steel wire drawing
Tugce Tekin (Ege University)
- Author in Characterization and heat treatment of an additively manufactured tool steel fabricated by laser metal deposition
A. Erman Tekkaya (Institute of Forming Technology and Lighweight Components)
- Co-author in Manufacturing of integrated cooling channels by directed energy deposition for hot stamping tools with ball burnished surfaces
Werner Theisen (Ruhr-Universität Bochum, Lehrstuhl Werkstofftechnik)
- Co-author in Novel development of an NbC-containing powder metallurgical martensitic steel with outstanding tribocorrosion resistance
Roxane Trehorel (ArcelorMittal)
- Author in The role of microstructure on the properties of martensitic stainless steels used for plastic mould applications
Philipp Tröber (Technische Universität München)
- Author in On the sensitivity of a tool-workpiece-thermocouple to material properties
Christoph Turk (voestalpine Böhler Edelstahl GmbH & Co KG)
- Co-author in Martensitic Stainless Steels for Food Contact Applications
Christoph Turk (voestalpine Böhler Edelstahl GmbH & Co KG)
- Co-author in Overall performance comparison of conventional and printed Böhler W360 for high pressure die casting
Daniele Ugues (Politecnico di Torino)
- Author in Characterization of an AISI H13 hot-work tool steel produced by Electron Beam Melting
Markus Uhlirsch (Swerim AB)
- Author in Influence of post treatment on wear performance of E-PBF high-alloy (Cr-Mo-V) cold work tool steel
Dorian Vadot (ArcelorMittal)
- Co-author in The role of microstructure on the properties of martensitic stainless steels used for plastic mould applications
Guilherme Valadão (UEPG)
- Author in Plasma nitriding of H13 tool steel surfaces for improved thermal fatigue resistance of die-casting molds
Frank van Soest (Deutsche Edelstahlwerke Specialty Steel & Co KG)
- Co-author in Hot working tool steel with bainitic microstructure
Frank van Soest (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)
- Co-author in Additive manufacturing of a high-carbon tool steel powder
Marcelo V. Carvalho (Federal Technology University – Paraná)
- Co-author in Analysis of the machining process in HVOF coating for Aluminum Die Casting Mold
Dominique Viale (ArcelorMittal)
- Co-author in The role of microstructure on the properties of martensitic stainless steels used for plastic mould applications
Peter Vikner (Aubert&Duval)
- Author in Pearl®Micro TS700 powder for additive manufacturing of die casting tooling
Emília Villani (Technological Institute of Aeronautics - ITA)
- Co-author in Specification of a die demonstrator for automotive class A surfaces
Andreas Vogelpoth (Fraunhofer Institute for Laser Technology ILT)
- Author in Additive manufacturing of tool steels
Wolfram Volk (Technical University of Munich)
- Author in On the sensitivity of a tool-workpiece-thermocouple to material properties
LiLiang Wang (Imperial College London)
- Co-author in Effect of tooling temperature on the transient lubricant behaviour in hot metal forming processes
Liliang Wang (Department of Mechanical Engineering, Imperial College London, London, SW7 2AZ, UK)
- Co-author in Abrasive wear mechanism based interactive friction model for machining
Sebastian Weber
- Author in Ontology for heterogeneous manufacturing technologies in tooling
Sebastian Weber
- Co-author in Microstructure and properties of a novel carbon-martensitic hot work tool steel processed by Laser Additive Manufacturing without preheating
Sebastian Weber
- Co-author in Short-term heat treatment of the high-alloy cold-work tool steel X153CrMoV12: Calculation of metastable microstructural states
Sebastian Weber (Ruhr-Universität Bochum, Lehrstuhl Werkstofftechnik)
- Co-author in Novel development of an NbC-containing powder metallurgical martensitic steel with outstanding tribocorrosion resistance
Peter Weiland (SMS group GmbH)
- Author in Additive manufacturing of tool steels
Markus Welm (Technical University of Munich)
- Author in On the sensitivity of a tool-workpiece-thermocouple to material properties
Valentin Wiesinger (Univ. of Apll. Sciences Upper Austria, K1MET)
- Co-author in Effect of the slag composition on the process behavior, energy consumption and non-metallic inclusions during electro-slag-remelting
Simon Wituschek (Institute of Manufacturing Technology)
- Author in Versatile tool design for a tumbling self-piercing riveting process
Kyle Wolf (Marquette University)
- Author in Finite Element Simulation of Hot Compression Tools Having an Anisotropic Surface Texture
- Co-author in Deformation behavior of directional die surface textures in warm and hot working
Xiao Yang
- Co-author in Abrasive wear mechanism based interactive friction model for machining
Xiao Yang (Imperial College London)
- Author in Effect of tooling temperature on the transient lubricant behaviour in hot metal forming processes
Venu Yarasu (Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava.)
- Author in Dry sliding tribological behaviour of cryotreated Cr-V ledeburitic tool steel against CuSn6 counterpart
Frederik Zanger
- Co-author in Stainless steels for plastic mold frames featuring enhanced machinability
LeMeng Zhang (Imperial College London)
- Co-author in Effect of tooling temperature on the transient lubricant behaviour in hot metal forming processes
Zhao Zhao
- Author in Direct laser metal deposition of H13 tool steel on Cu-Be alloy substrate for tooling applications
David Zidar (Montanuniversität Leoben)
- Author in Hardness loss of plastic mold steels: Phenomenon in injection molding
Horst Zunko (voestalpine Böhler Edelstahl GmbH & Co KG)
- Author in Martensitic Stainless Steels for Food Contact Applications
- Co-author in Hardness loss of plastic mold steels: Phenomenon in injection molding
- Co-author in Influence of partitioning effects on the retained austenite content and properties of a martensitic stainless steel