Name: 27th IFHTSE CONGRESS & EUROPEAN CONFERENCE ON HEAT TREATMENT 2022
Start: 2022-09-05T09:00:00+02:00
End: 2022-09-08T19:00:00+02:00
Location: Wyndham Grand Salzburg Conference Center

27th IFHTSE CONGRESS & EUROPEAN CONFERENCE ON HEAT TREATMENT 2022

from Monday, 5 September 2022 (09:00) to Thursday, 8 September 2022 (19:00)

Monday, 5 September 2022

15:00 Registration
Registration
15:00 - 18:00

18:00 Welcome Reception
Welcome Reception
18:00 - 20:00
Tuesday, 6 September 2022

08:30 Registration
Registration
08:30 - 09:30

09:30 Opening
Opening
09:30 - 09:50

09:50 Awards (Fellowship, Honorary President, Medal)

09:50 - 10:20
Room: Room 1 - SALZBURG
10:20 KEYNOTE: Dr. Stefan HOCK "50 years of IFHTSE – Paths from the past to the present and beyond"
Dr. Stefan HOCK "50 years of IFHTSE – Paths from the past to the present and beyond"
10:20 - 10:50
Room: Room 1 - SALZBURG
Contributions

10:20 50 years of IFHTSE – Paths from the past to the present and beyond - Stefan Hock
10:50 KEYNOTE: Prof. John G. SPEER (IFHTSE Medal) “Recent developments and perspectives of heat treatment in steel processing”
Prof. John G. SPEER (IFHTSE Medal) “Recent developments and perspectives of heat treatment in steel processing”
10:50 - 11:20
Room: Room 1 - SALZBURG
Contributions

10:50 Recent Developments and Perspectives of Heat Treatment in Steel Processing - John Speer (Director of the Advanced Steel Processing and Products Research Center (ASPPRC), Colorado School of Mines)
11:20 Lunch
Lunch
11:20 - 12:50
12:50 KEYNOTE: Prof. Massimo PELLIZZARI "The importance of Heat Treatment in Additive Manufacturing of tool steels and Ti alloys"
Prof. Massimo PELLIZZARI "The importance of Heat Treatment in Additive Manufacturing of tool steels and Ti alloys"
12:50 - 13:20
Room: Room 1 - SALZBURG
Contributions

12:50 The importance of Heat Treatment in Additive Manufacturing of tool steels and Ti alloys - Massimo Pellizzari (University of Trento, Dpt. Industrial Engineering)
13:20 HEAT TREATMENT: Heat Treatment and Surface Engineering in Additive Manufacturing
Heat Treatment and Surface Engineering in Additive Manufacturing
13:20 - 15:00
Room: Room 1 - SALZBURG
Contributions

13:20 Vacuum heat treatment of Ti6Al4V alloy produced via SLM additive manufacturing - Giorgio VALSECCHI

13:45 Recent advances in heat treatment and surface engineering within metal additive manufacturing - Thomas CHRISTIANSEN (Technical University of Denmark (DTU), Department of Mechanical Engineering)

14:10 Simultaneous aging and surface treatment of 3D printed maraging steel - Imre FELDE (ÓBUDA UNIVERSITY)

14:35 Influence of the total thermal cycle during wire-based cladding by means of electron beam and subsequent boriding on the microstructure and properties of the Inconel 718 layer - Anja BUCHWALDER (TU Bergakademie Freiberg, Institute of Materials Engineering)
STEEL: Continuous Heat Treatment Processes for Steels
Continuous Heat Treatment Processes for Steels
13:20 - 15:00
Room: Room 3 - ATTERSEE
Contributions

13:20 Continuous Annealing Digital Twin Implementation and Calibration - Roland EISL (ENRAG GmbH) Peter SEEMANN (EBNER Industrieofenbau GmbH)

13:45 Influence of the quenching and partitioning heat treatment process on the hydrogen embrittlement resistivity of 20MnSi steel - Hamdi ELASYED (TU Graz)

14:10 Replacement of Si by Al in Q&P-steels and its effect on the tempering behavior of martensite - Matthias WALLNER (Univ. of Appl. Sciences Upper Austria)
SURFACE ENGINEERING: Surface Hardening, Carburizing, Carbonitriding
Surface Hardening, Carburizing, Carbonitriding
13:20 - 15:00
Room: Room 2 - WOLFGANGSEE
Contributions

13:20 Determination of machining parameters for a specific adjustment of the residual stress profile by induction hardening - Friedhelm FRERICHS (Leibniz-IWT)

13:45 Carbon penetration behavior of Cr-Mo steel specimen in carburizing above eutectic temperature - Ryosuke YAMAMOTO (Kansai University)

14:10 Martensitic Induction hardening of nitrided layers - Stefanie HOJA (Leibniz-Institut für Werkstofforientierte Technologien - IWT)

14:35 Impact of process parameters during multi-step carbo-austempering on the hardness and microstructure morphology - Rainer FECHTE-HEINEN (Leibniz-Institut für Werkstofforientierte Technologien - IWT)
15:00 Coffee Break
Coffee Break
15:00 - 15:20
15:20 HEAT TREATMENT: Heat Treatment of Non-ferrous Alloys & Advanced Surface Engineering
Heat Treatment of Non-ferrous Alloys & Advanced Surface Engineering
15:20 - 16:35
Room: Room 1 - SALZBURG
Contributions

15:20 The effects of heat treatments on the mechanical properties of secondary aluminium alloys - Onur ÖZAYDIN (Cevher Jant Sanayii A.S.)

15:45 Analysis of the stress-relief heat treatment of aluminium alloy wheels - Onur ÖZAYDIN (Cevher Jant Sanayii A.S.)

16:10 Modification of boride layers on alloy steel by impulse electron beam - Undrakh MISHIGORZHIYN (Institute of Physical Materials Science Russian Academy of Sciences, Siberian Branch)
STEEL: Heat Treatment of Steels
Heat Treatment of Steels
15:20 - 16:10
Room: Room 3 - ATTERSEE
Contributions

15:20 The hydrochloric acid corrosion susceptibility of steel rebars exposed to heat treatments - Christian PAGLIA (SUPSI, Insitute of materials and constructions)

15:45 Energy efficient manufacturing chain for advanced bainitic steels based on thermo-mechanical processing - Pedro José DE CASTRO (Leibniz-Institut für Werkstofforientierte Technologien - IWT)
SURFACE ENGINEERING: Surface Hardening, Carburizing, Carbonitriding
Surface Hardening, Carburizing, Carbonitriding
15:20 - 17:00
Room: Room 2 - WOLFGANGSEE
Contributions

15:20 Contact fatigue in carbonitrided steels and the influence of retained austenite - Emil STÅLNACKE (Swerim AB)

15:45 Carbo-nitriding of CVT pushbelt components for further optimization of wear and fatigue properties - Bert PENNINGS (Bosch Transmission Technology B.V.)

16:10 Influence of nitrogen enrichment on microstructure and mechanical properties of a carbonidrided low steel alloy - David Maréchal (IRT M2P)

16:35 Influence of shot peening on carbonitrided low alloy steel - David Maréchal (IRT M2P)
17:00 Sightseeing Walking Tour from Wyndham Grand Salzburg Conference Center to the Residence Salzburg
Sightseeing Walking Tour from Wyndham Grand Salzburg Conference Center to the Residence Salzburg
17:00 - 18:30

18:30 Residence Salzburg-CONCERT
Residence Salzburg-CONCERT
18:30 - 19:30

19:30 Conference Dinner-Restaurant "Stiegl-Keller" Salzburg
Conference Dinner-Restaurant "Stiegl-Keller" Salzburg
19:30 - 22:00
Wednesday, 7 September 2022
08:30 KEYNOTE: Dr. Tirumalai S. SUDARSHAN "The Kaleidoscope of Surface Engineering”
Dr. Tirumalai S. SUDARSHAN "The Kaleidoscope of Surface Engineering”
08:30 - 09:00
Room: Room 1 - SALZBURG
Contributions

08:30 The Kaleidoscope of Surface Engineering - Tirumalai S Sudarshan (President and CEO of Materials Modification Inc (MMI))
09:00 HEAT TREATMENT: Modelling and Simulation
Modelling and Simulation
09:00 - 10:40
Room: Room 1 - SALZBURG
Contributions

09:00 Visualization of vapor film collapse mode during unsteady boiling on oil quenching by using cellular automaton simulation - Tsuyoshi SUGIMOTO (National Institute of Technology, Asahikawa College)

09:25 Combined CFD and heat treatment simulation of high-pressure gas quenching process. - Paul HEINZ (Schaeffler) Kay JUCKELANDT (Schaeffler)

09:50 Applying the ANSYS GEKO Turbulence Model to Simulate Jet Impingement Cooling in Continuous Heat Treatment Lines - Jan Erik MENZLER (RWTH Aachen University - Department for Industrial Furnaces and Heat Engineering)

10:15 Experimental and numerical investigation of heterogenous gas quenching for determining optimal heat treatment parameters - Nithin Mohan NARAYAN (Leibniz Institute for Materials Engineering- IWT Bremen)
STEEL: Heat Treatment of Powder Metallurgical and Tool steels
Heat Treatment of Powder Metallurgical and Tool steels
09:00 - 09:50
Room: Room 3 - ATTERSEE
Contributions

09:00 Insufficient heat treatment and retained austenite in tool steels and high-speed steels - Harald LEITNER (voestalpine Böhler Edelstahl GmbH & CoKG)

09:25 Hardenability of PM steel alloyed using tailored Master Alloys - Stefan GEROLDINGER (TU Wien)
SURFACE ENGINEERING: Nitriding and Nitrocarburizing
Nitriding and Nitrocarburizing
09:00 - 10:15
Room: Room 2 - WOLFGANGSEE
Contributions

09:00 Impact of deep cryogenic treatment on nitridability and properties of nitrided hot work tool steel - Bojan PODGORNIK (Institute of Metals and Technology)

09:25 Improving the properties of K490MC tool steel after hardening accompanied with deep cryogenic treatment and plasma nitriding - Darko LANDEK (University of Zagreb)

09:50 Effects of Chromium and Nickel Screens on Plasma Nitriding with Screen - Akio NISHIMOTO (Kansai University)
10:40 Coffee Break
Coffee Break
10:40 - 11:10
11:10 HEAT TREATMENT: Modelling and Simulation
Modelling and Simulation
11:10 - 12:25
Room: Room 1 - SALZBURG
Contributions

11:10 Analysis of shots flight inside and outside of peening nozzle - Yusuke SAEKI (Toyota Technological Institute)

11:35 Simulated Strains-Based Approach for Explaining Distortion and Residual Stress in Quenched Steel Cylinder - Kyozo ARIMOTO (Arimotech Ltd.)

12:00 Application of New Artificial Neural Network model to Predict Heat Transfer Coefficients during Quenching - Imre FELDE (Obuda University)
STEEL: Heat Treatment of Stainless Steels
Heat Treatment of Stainless Steels
11:10 - 12:50
Room: Room 3 - ATTERSEE
Contributions

11:10 Corrosion resistance of cryogenically treated tool steels. - Peter JURIČ (Slovak University of Technology)

11:35 Investigations on the effect of cooling rate on quenching & partitioning (Q&P) in martensitic stainless steels - Simona KRESSER (University of Applied Sciences Upper Austria)

12:00 Fine grained high-interstitial stainless TRIP steel; processing and properties - Marcel A.J. SOMERS (Technical University of Denmark)

12:25 Austenite aging of 17-4 PH martensitic stainless steel: phenomena, effects and implications - Matteo VILLA (Technical University of Denmark)
SURFACE ENGINEERING: Nitriding and Nitrocarburizing
Nitriding and Nitrocarburizing
11:10 - 12:50
Room: Room 2 - WOLFGANGSEE
Contributions

11:10 High temperature solution nitriding and heat treatment of martensitic stainless steels for bearing applications - Matteo VILLA (Technical University of Denmark)

11:35 Solution nitriding of a Fe-0.13%C-1.2%ni-13%Cr grade steel: a theoretical and experimental study - Olivier SKIBA (IRT-M2P)

12:00 Nitriding on as quenched steel 33CrMoV12-9 - Sébastien JÉGOU (Arts et Métiers)

12:25 Salt Bath Nitrocarburizing: Technology ready for future including environmental challenges - Luc HERRMANN
12:50 Lunch
Lunch
12:50 - 14:20
14:20 HEAT TREATMENT: Energy and Environmental Aspects
Energy and Environmental Aspects
14:20 - 15:35
Room: Room 1 - SALZBURG
Contributions

14:20 Discussion on energy saving and emission reduction technology of heat treatment equipment - Klaus BUCHNER (Aichelin Holding GmbH)

14:45 CO2-Reduction by enhanced energy efficiency in LPC-heat treating plants - Ben KAHLE (ALD Vacuum Technologies GmbH)

15:10 CO2-neutral process heating for carburizing furnaces – Ecological analysis and first experimental results - Lukas SANKOWSKI (RWTH Aachen University - Department for Industrial Furnaces and Heat Engineering)
HEAT TREATMENT: Quenching Technology
Quenching Technology
14:20 - 15:35
Room: Room 3 - ATTERSEE
Contributions

14:20 Design of a Quench Ring for Proper Quenching of Small Cylinders – Initial Investigation - Patrice LASNE (Transvalor S.A)

14:45 Design of a Quench Ring for Proper Quenching of Small Cylinders – Modified Design - Donald MACKENZIE (Quaker Houghton Inc.)

15:10 Control of quench severity by applying an electric potential during heat treatment of aluminium alloys - Peter KRUG (Cologne University of Applied Sciences)
SURFACE ENGINEERING: Advanced Surface Engineering and Coating
Advanced Surface Engineering and Coating
14:20 - 15:35
Room: Room 2 - WOLFGANGSEE
Contributions

14:20 Advances in thermochemical surface engineering and heat treatment of titanium and titanium alloys - Thomas CHRISTIANSEN (Technical University of Denmark (DTU), Department of Mechanical Engineering)

14:45 PACVD- and nitriding processes as surface treatments to enhance corrosion- and wear resistance of piston rods for the hydraulic industry - Christian DIPOLT (RÜBIG GmbH & Co KG)

15:10 Surface nitriding of aluminum using barrel and its applications - Masahiro OKUMIYA (Toyota Technological Institute)
15:35 Coffee Break
Coffee Break
15:35 - 16:05
16:05 HEAT TREATMENT: Energy and Environmental Aspects
Energy and Environmental Aspects
16:05 - 17:20
Room: Room 1 - SALZBURG
Contributions

16:05 Carburizing atmospheres in heat-treatment furnaces - Contribution of industrial gases for reducing the carbon footprint - Georg LEHMKUHL (Air Liquide Deutschland GmbH)

16:30 Decarbonization plan for conventional heat-treatment facilities : CO2 contributors assessment, neutrality targets, levers and actions plan - Valerie WOIMBEE (Faurecia Forvia)

16:55 Climate change and loss of biodiversity raise new provocations on the materials science and surface engineering - Zoltan KOLOZSVARY (Sapientia University, Tg.Mures)
HEAT TREATMENT: Quenching Technology
Quenching Technology
16:05 - 17:20
Room: Room 3 - ATTERSEE
Contributions

16:05 Development of an individually adjustable nozzle cooling system for optimization of the strip flatness for ultra-thin precision strips: state of the art and evaluation of the solution approaches - Nico RADEMACHER (Department for Industrial Furnaces and Heat Engineering of the RWTH Aachen University)

16:30 Investigation methods for the determination of flow topography on horizontal surfaces in spray nozzle fields - Jan HOF (RWTH Aachen University - Department for Industrial Furnaces and Heat Engineering)

16:55 Design of cooling sections for heat treatment based on laboratory measurements of heat transfer coefficient - Petr KOTRBACEK (Brno University of Technology, Faculty of Mechanical Engineering, Heat Transfer and Fluid Flow Laboratory)
17:20 IFHTSE - Vision 2040

17:20 - 18:00
Room: Room 1 - SALZBURG

18:00 Networking-Evening: Network-Evening
Network-Evening
18:00 - 20:15
Poster: Poster
Poster
18:00 - 20:15
Contributions

18:02 Plasma nitriding properties of sintered body formed using CoCrFeNiMn high-entropy alloy powder by varying ball-milling duration - Jiaxin PENG (Kansai University)

18:04 Gas-Cyclic Nitriding of Corrosion Resistant Steels - Larisa PETROVA (MADI University)

18:06 Effect of the Amount of Zr Addition on Microstructure and Mechanical Properties of CoCrFeNi High-Entropy Alloys Prepared by Mechanical Alloying and Spark Plasma Sintering - Zixiang FAN (Kansai University)

18:08 Influence of carbon contamination on the gas discharge composition in an active screen nitrocarburizing reactor - Andrei PIPA (Leibniz Institute for Plasma Science and Technology (INP), Felix-Hausdorff-Straße 2, 17489 Greifswald, Germany)

18:10 Solution treatment duration influence on microstructural and mechanical properties of a cold-rolled Ti-Nb-Zr-Ta-Sn-Fe alloy - Vasile Danut COJOCARU (University POLITEHNICA of Bucharest)

18:12 Study of the influence of heat treatment on the metallurgical characteristics of the IN625 alloy - Luis Henrique PIZETTA ZORDAO (Politecnico di Milano)

18:14 Increasing the wear resistance of high-alloy tool steels for cold work with multilayer coatings TiN/TiCN and TiN/Ti-B-N applied by the PACVD process - Darko LANDEK (university professor)

18:16 Abnormal plate type iron-carbonitrides development during salt bath nitrocarburizing of Fe-4wt.%V alloy - Anupama KASHYAP (IIT Roorkee)

18:18 Cyclic application of ultrasonic shot peening and low-temperature liquid nitriding on 316 stainless steel - Jagadeesh NEDURI (Indian Institute of Technology-Roorkee, India)

18:20 Salt Bath Quenching after Nitriding in AISI H13 Tool - Lauralice CAMPOS FRANCESCHINI CANALE (EESC - USP)

18:22 Prospects for the use of additive manufacturing technology for manufacturing metal matrix composite materials - Riana ABLEYEVA

18:24 Non-destructive determination of the hardness penetration depth by laser-ultrasound - Edgar SCHERLEITNER (Research Center for Non Destructive Testing GmbH - RECENDT)
Thursday, 8 September 2022
09:00 HEAT TREATMENT: Sören SEGERBERG memorial Symposium
Sören SEGERBERG memorial Symposium
09:00 - 10:40
Room: Room 1 - SALZBURG
Contributions

09:00 Quenching for the future - In memoriam of Sören Segerberg - Eva TROELL (Unit manager)

09:25 Born of SmartQuench - In Memoriam of Dr. Soren Segerberg - Imre FELDE (ÓBUDA UNIVERSITY)

09:50 An Overview of Researches and Standardization Activities on Test Systems for Quenchant Characterization in Japan - Kyozo ARIMOTO (Arimotech Ltd.)

10:15 Advanced developments in the field of liquid quenchants State of technique - New Requirements – Technical Perspectives - Rainer BRAUN (BU)
SURFACE ENGINEERING: Induction Heating Symposium
Induction Heating Symposium
09:00 - 10:15
Room: Room 3 - ATTERSEE
Contributions

09:00 Induction heating modelling for tempering of low alloy steels - Xabier QUEREJETA IRIZAR (Ikerlan)

09:25 Neural Metamodels for the Identification of Driving Parameters of an Induction Heating Process - Matteo Ciofani (University of Padova)

09:50 Inductive heat treatment of high-speed steels - Harald LEITNER (voestalpine Böhler Edelstahl GmbH & CoKG)
SURFACE ENGINEERING: Low-Temperature Surface Engineering
Low-Temperature Surface Engineering
09:00 - 10:40
Room: Room 2 - WOLFGANGSEE
Contributions

09:00 Influence of cold rolling and post annealing on low-temperature gaseous nitriding of meta-stable and nitrogen-stabilized 304 austenitic stainless steel - Bo WANG (DTU)

09:25 Active-Screen Plasma Nitriding and Carburizing of an Austenitic Stainless Steel Small-Diameter Thin Pipe - Kenzo SUMIYA (Hatta Kogyo Co. Ltd.)

09:50 Improved corrosion fatigue performance of stainless steels by low temperature surface hardening - Alexandra BAUER

10:15 'Ultra-low' temperature nitriding of martensitic stainless steels - Magnus Grüner
10:40 Coffee Break
Coffee Break
10:40 - 11:00
11:00 HEAT TREATMENT: Furnace equipment & Process Control
Furnace equipment & Process Control
11:00 - 12:40
Room: Room 2 - WOLFGANGSEE
Contributions

11:00 Technological Shift : from mesh-belt furnaces to a clean, compact and automated production - Patrick POULOUX (ECM Technologies)

11:25 The ISO 20431 standard: a new quality standard for heat treatment workshops - Marc BUVRON

11:50 Intelligent Heat Treatment with digital Solutions - Thomas HEINRICH (Bürkert Werke Gmbh & Co KG)

12:15 Smart sensors fulfilling the promise of the de-carbonization and IoT - Ivica NUJIC (No) Uwe SCHERF
HEAT TREATMENT: Sören SEGERBERG memorial Symposium
Sören SEGERBERG memorial Symposium
11:00 - 12:40
Room: Room 1 - SALZBURG
Contributions

11:00 Quenching with Aqueous Polymer Solutions - Thomas LÜBBEN (Leibniz-IWT, Bremen, Germany)

11:25 Comparison of high-severity quenchants for low-carbon steels - Lauralice CAMPOS FRANCESCHINI CANALE (EESC - USP)

11:50 Current Investigations at Quenching Research Centre - Darko LANDEK (University profesor)

12:15 Characterization of Polymer Quenchants - Influence of Agitation - Donald MACKENZIE (Quaker Houghton Inc.)
SURFACE ENGINEERING: Induction Heating Symposium
Induction Heating Symposium
11:00 - 12:15
Room: Room 3 - ATTERSEE
Contributions

11:00 Multi-physics finite element simulations for induction brazing - Michele FORZAN (University of Padova Department of Industrial Engineering)

11:25 Lifetime Enhancement of Induction Heating Coils: A Complex Approach Based on Numerical Simulations and 3D-Printing - Dmitry IVANOV

11:50 Calibration of model for hardening gear wheels - Debela DESISA (Silesian University of Technology)
12:40 TBYAA-annoncement & Poster Awards & Closing
TBYAA-annoncement & Poster Awards & Closing
12:40 - 12:50
Room: Room 1 - SALZBURG

12:50 Lunch
Lunch
12:50 - 13:50