Name: 42nd International Deep Drawing Research Group Conference - IDDRG 2023
Start: 2023-06-19T08:00:00+02:00
End: 2023-06-22T15:00:00+02:00
Location: House of Culture, Luleå, Sweden

42nd International Deep Drawing Research Group Conference - IDDRG 2023

from Monday, 19 June 2023 (08:00) to Thursday, 22 June 2023 (15:00)

Monday, 19 June 2023

08:00 REGISTRATION
REGISTRATION
08:00 - 09:00

09:00 OPENING BY IDDRG PRESIDENT AND GENERAL-SECRETARY
OPENING BY IDDRG PRESIDENT AND GENERAL-SECRETARY
09:00 - 09:10
09:10 PLENARY TALKS
09:10 - 10:10
Room: 1. Lilla Salen
Contributions

09:10 SSAB’s transformation to Fossil Free Steel with the HYBRIT Technology - Martin Pei (SSAB)

09:40 History of Hot Stamping process and hot stamping simulations - Per-Emil Back (Gestamp R&D Sweden)
10:10 COFFEE BREAK
COFFEE BREAK
10:10 - 10:40
10:40 COLD AND HOT FORMING AND TRIMMING (INCL. SINGLE AND MULTI-STEP FORMING)
10:40 - 12:20
Room: 1. Lilla Salen
Contributions

10:40 Carburization behavior at elevated temperatures and mechanical properties of a hot stamped complex phase steel - Jan Henning Risse (Friedrich-Alexander Universität Erlangen-Nürnberg, Institute of Manufacturing Technology)

11:00 Analysis of process limits for partial hot stamping with controlled pre-cooling by radiation exchange - Alborz Reihani

11:20 Oxygen-free resistance heating with nitrogen and silane as an energy-efficient heating process for hot stamping - Lorenz Albracht (Institute of Forming Technology and Machines)

11:40 Study of Microstructural Evolution of Press Hardening Steels using Dilatometer and In-situ Studies for a Simulated Hot Stamping Condition - Hong Zhu (ArcelorMittal USA Research LLC)

12:00 Development of Rapid Die Cooling Technology to Reduce Cycle Time in Hot Stamping Process - Jae myoung Park (HYUNDAI STEEL)
FOSSIL-FREE STEEL, SUSTAINABLE MATERIALS, AND MATERIAL FORMING
10:40 - 12:00
Room: 2. Världsarvet/ Hägnan
Contributions

10:40 Strength enhancement and uniform grain refinement through cross route-constrained groove pressing - Sunil Kumar (Sardar Vallabhbhai National Institute of Technology Surat)

11:00 Evaluation of hole expansion ratio of ultra-high strength martensitic steels produced with various processing routes - Jaakko Hannula (University Of Oulu)

11:20 Material variability effects on automotive part production process - Toni Chezan (Tata Steel Nederland)

11:40 Partial resistance tempering of hot-stamped components for subsequent bending - Ehsan Farahmand (Institute of Forming Technology and Machines)
12:20 LUNCH
LUNCH
12:20 - 13:30
13:30 PLENARY TALKS
13:30 - 14:00
Room: 1. Lilla Salen
Contributions

13:30 Sheet metal forming simulations at Volvo Cars: the past, the present and the future - Mats Sigvant (Volvo Cars)
14:00 COLD AND HOT FORMING AND TRIMMING (INCL. SINGLE AND MULTI-STEP FORMING)
14:00 - 15:20
Room: 1. Lilla Salen
Contributions

14:00 Investigation on evolution of microstructure and mechanical properties of heat-treatable aluminum alloy during hot sheet metal forming process - Tobias Teeuwen (IBF RWTH Aachen University)

14:20 Numerical analysis of the load paths and the resulting damage evolution during the deep drawing of dual-phase steel - Martina Mueller (Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University)

14:40 Part quality improvement in flexible roll forming of a combined variable width and depth component - Matthias Weiss (Deakin University)

15:00 Development of geometry variants and forming technology for metal diaphragms to increase the efficiency of diaphragm compressors - Mikhail Solovev (Institute for Machine Tools and Production Processes, Chemnitz University of Technology, Chemnitz, Germany)
FOSSIL-FREE STEEL, SUSTAINABLE MATERIALS, AND MATERIAL FORMING
14:00 - 14:40
Room: 2. Världsarvet/ Hägnan
Contributions

14:00 Evaluation of hardening models coupled with shear modified Lemaitre damage model for fracture prediction in incremental sheet forming - K Narasimhan (IIT Bombay)

14:20 The effect of scrap originating trace elements on the properties of low-alloyed steels’ - Shahroz Ahmed (Tampere University)
14:40 ADVANCED/SMART MATERIALS, BIPOLAR PLATES, AND MULTI-MATERIAL CONCEPTS/SOLUTIONS
14:40 - 15:20
Room: 2. Världsarvet/ Hägnan
Contributions

14:40 A mechanical interlocking joint between sheet metal and carbon fibre reinforced polymers through punching - Núria Latorre (Fundació Eurecat)

15:00 Process chain for forming and consolidating fiber-reinforced thermoplastics and metallic sheets in a two-stage isothermal tool - Joern Wehmeyer (Institute of Forming Technology and Machines)
15:20 COFFEE BREAK
COFFEE BREAK
15:20 - 15:50
15:50 FORMABILITY
15:50 - 17:10
Room: 2. Världsarvet/ Hägnan
Contributions

15:50 Local and global forming potential of present dual-phase steel developments - Thorsten Beier (thyssenkrupp Steel Europe AG)

16:10 Hot-forming of a 980 MPa third generation advanced high strength steel - ABDELBASET MIDAWI (University of Waterloo)

16:30 The Investigations on Formability of Tantalum RO5200 Thin Foils: Bio-Material - Omkar Kulkarni (Dr Vishwanath Karad MIT World Peace University, Pune) Ganesh kakandikar (Dr Vishwanath Karad MIT World Peace University, Pune)

16:50 Yield Locus Development and Microstructure Characterization of AA2219 under Planar Biaxial Loading - Priya Tiwari (Mechanical Engineering Department, Indian Institute of Technology, Bombay)
SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)
15:50 - 17:10
Room: 1. Lilla Salen
Contributions

15:50 Substitutive models of press deflections for efficient numerical die cambering - Peter Ottosson (RISE AB)

16:10 Simulation of deep drawing of dual phase steel sheets incorporating tribological behaviour predicted by advanced friction modelling - Archit Shrivastava (IIT Delhi)

16:30 Numerical modelling of shear cutting using particle methods - Olle Sandin (Luleå university of technology)

16:50 Evaluation of anisotropic fracture in AA1050-O sheet using uncoupled ductile fracture models with Hill48 plasticity - Aishwary Gupta (Seoul National University)
17:30 WELCOME RECEPTION
WELCOME RECEPTION
17:30 - 19:30
Tuesday, 20 June 2023

08:00 REGISTRATION
REGISTRATION
08:00 - 08:30
08:30 PLENARY TALKS
08:30 - 09:30
Room: 1. Lilla Salen
Contributions

08:30 Perspectives on AI applications in sheet metal forming - Mathias Liewald (Institute for Metal Forming Technology, University of Stuttgart)

09:00 Towards Virtual Tryout and Digital Twins at Volvo Cars - Johan Pilthammar (Volvo Cars)
09:30 FORMABILITY
09:30 - 10:10
Room: 3. VIP Room
Contributions

09:30 Numerical and experimental investigation of hole flangeability of AA6061 alloy - Vinay Kumar (Indian Institute of Technology, Delhi, India)

09:50 Influence of elevated surface temperature on the formability in cold forming of aluminum alloy sheets - Josef Domitner (Graz University of Technology)
LIGHTWEIGHT STRUCTURES
09:30 - 10:10
Room: 1. Lilla Salen
Contributions

09:30 Development of a novel in-situ measurement method for thermo-mechanically coupled material characterization of high-strength aluminum alloys - Nikolaos Rigas (Institute for Manufacturing Technology)

09:50 Performance of stringer sheet parts under static and dynamic load - Simon Biffar (Institute for Production Engineering and Forming Machines)
TOOLS AND DIES
09:30 - 10:10
Room: 2. Världsarvet/ Hägnan
Contributions

09:30 Dimensional precision and wear of a new approach for prototype tooling in deep drawing - Katja HOLZER (Technical University of Munich, Chair of Metal Forming and Casting)

09:50 Proposal of a new tool for pre-straining operations of sheet metals - Alexander Barlo (Blekinge Institute of Technology)
10:10 COFFEE BREAK
COFFEE BREAK
10:10 - 10:40
10:40 FORMABILITY
10:40 - 12:20
Room: 3. VIP Room
Contributions

10:40 An evaluation method for experimental necking detection of automotive sheet metals - Quoc Tuan Pham (Department of Mechanical Engineering, Blekinge Institute of Technology, Karlskrona, Sweden)

11:00 Edge fracture of the first and third-generation high-strength steels: DP1000 and QP1000 - Zinan Li (Aalto University)

11:20 Strain evolution during hole expansion testing of 800 MPa tensile strength hot-rolled steels - Pekka Plosila (University of Oulu)

11:40 Accuracy of stretch flange formability prediction by considering strain gradient for actual car body parts - EIJI IIZUKA (JFE Steel Corporation)

12:00 Effect of blank size on impact hydroforming of 2195 Al-Li alloy half-tube part with curvature - Hong-Liang Zhu (Institute of Metals, Chinese Academy of Sciences;University of Science and Technology of China)
LIGHTWEIGHT STRUCTURES
10:40 - 11:40
Room: 1. Lilla Salen
Contributions

10:40 Characterization of the mechanical properties of selectively embossed sheet metal materials under multi-axial loads - Pascal Heinzelmann (Institut for Metal Forming Technology)

11:00 Micro incremental forming of thin SS304 foils and its microstructural study - Peeyush Mahajan (IIT Bombay)

11:20 Multi-functional SMC-aluminum battery tray to drive lightweight design - Michael Machhammer (AP&T Sweden AB)
TOOLS AND DIES
10:40 - 12:00
Room: 2. Världsarvet/ Hägnan
Contributions

10:40 Investigation of tool damage in shear cutting of ultra high strength sheet steels - Thorsten Beier (thyssenkrupp Steel Europe AG)

11:00 Optimization of wear-, fracture- and corrosion performance of Vanadis 6 steel through cryogenic treatment and tempering - Peter Jurči (Slovak University of Technology)

11:20 Pressure distributions in deep drawing with a passive cardanic blank holder - Alexander Breunig (Technical University Darmstadt)

11:40 Novel tool steels for application in hot stamping - Jonas Knippenberg (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)
11:40 SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)
11:40 - 12:20
Room: 1. Lilla Salen
Contributions

11:40 Research on the evolving yielding behavior and micro-mechanism in biaxial deformation of DP1180 sheet based on crystal plasticity finite element model - Bingying Zhou (Beihang University)

12:00 An artificial neural network approach on crystal plasticity for material modeling in macroscopic simulations - Lukas Martinitz (Technical University of Munich, Chair of Metal Forming and Casting)
12:20 LUNCH + GROUP PHOTOGRAPHY
LUNCH + GROUP PHOTOGRAPHY
12:20 - 13:40
13:40 PLENARY TALKS
13:40 - 14:10
Room: 1. Lilla Salen
Contributions

13:40 Optimal milling data preparation for draw dies - Bart Carleer (AutoForm Engineering Switzerland )
14:10 FORMABILITY
14:10 - 15:50
Room: 3. VIP Room
Contributions

14:10 Effect of pre-strain on the edge formability of high strength steels for chassis applications - Anna Payà (Eurecat)

14:30 Forming of a cylindrical cup in 7075-T6 under warm temperature conditions - Sylvain royne (IRDL Lorient)

14:50 Determination of edge fracture limit strain for AHSS in the ISO-16630 hole expansion test - Alexander Barlo (Blekinge Institute of Technology)

15:10 Effect of the intercritical annealing in the formability and microstructure of a medium Mn steel sheet - JOSE LUIS HERNANDEZ RIVERA (CONACYT-UNIVERSIDAD AUTONOMA DE SAN LUIS POTOSI)

15:30 Experiments and simulations of the drawing envelope of pure aluminum - Yannis Korkolis (The Ohio State University)
SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)
14:10 - 15:50
Room: 1. Lilla Salen
Contributions

14:10 Measurement and prediction methods for forming limit strain of stretch bending deformation in sheet metal forming - Yuki Taguchi (Application Technology Center, Technical Development Group, Kobe Steel, LTD.)

14:30 Displacement based simulation and material calibration based on digital image correlation part I - theory - Christian Liebold (DYNAmore GmbH)

14:50 An overview of Methods for Simulating Sheet Metal Forming with Elastic Dies - Johan Pilthammar (Volvo Cars & Blekinge Institute of Technology)

15:10 Three Industrial Cases of Sheet Metal Forming Simulations with Elastic Dies - Johan Pilthammar (Volvo Cars)

15:30 Displacement based simulation and material calibration based on digital image correlation part II - application - Christian Ilg (DYNAmore GmbH)
TOOLS AND DIES
14:10 - 15:10
Room: 2. Världsarvet/ Hägnan
Contributions

14:10 Prediction strategy for forming and joining process of oval tubes - Markus Stennei (TU Dortmund)

14:30 Optimization of the physical scaling approach through adaption of the inverted membrane stresses - Philipp Zimmermann (Heilbronn University of Applied Sciences)

14:50 Wear characteristics of the tool in the cold stamping process of ultra high strength steel sheet by establishing a novel wear test method based on the progressive die - Junho Bang (Korea Institute of Industrial Technology)
15:10 TRIBOLOGY
15:10 - 15:50
Room: 2. Världsarvet/ Hägnan
Contributions

15:10 Friction and lubrication modelling in sheet metal forming: Influence of local tool roughness on product quality and process robustness - Johan Hol (TriboForm Engineernig B.V.)

15:30 Experimental investigation of the effect of lubricant change on automotive component - Lucas Alexandre de Carvalho (University of Miskolc) Zsolt Lukács (Institute of Materials Science & Technology, Faculty of Mechanical Engineering)
15:50 COFFEE BREAK
COFFEE BREAK
15:50 - 16:20
16:20 DIGITAL TRANSFORMATION, DIGITALIZATION, SMART PLANTS, SMART PRESSHOPS
16:20 - 17:20
Room: 2. Världsarvet/ Hägnan
Contributions

16:20 Formability evaluation based on a constitutive model with stress rate direction dependency considering bifurcation modes - Tetsuo Oya (Keio University)

16:40 Process Monitoring using Digital Twin-Based Sensors integrated in Tool Clamping Surface - Robin Kurth

17:00 Industrial Internet of Things and Big Data Techniques for the Smart Press Shop 4.0 Development in Automotive Industry - Ivan Peinado-Asensi (CEU Cardenal Herrera University)
FORMABILITY
16:20 - 17:00
Room: 3. VIP Room
Contributions

16:20 Experimental Characterization and Prediction of Forming Limit Diagrams of PHS1800 During Hot Stamping - Pedram Samadian (University of Waterloo)

16:40 CRASHWORTHINESS EVALUATION OF PRESS HARDENED STEELS WITH DIFFERENT LATH-LIKE MICROSTRUCTURES - Vicente P. Aroca (CENIM-CSIC)
SIMULATIONS (INCL. MATERIAL MODELS, TOPOLOGY OPTIMIZATION, TRIBOLOGY, SPRINGBACK COMPENSATION, AND GEOMETRY ASSURANCE)
16:20 - 17:20
Room: 1. Lilla Salen
Contributions

16:20 Development of a new cyclic shear test setup for characterizing thin metallic foils - Maxim Beck (Institute for Metal Forming Technology, University of Stuttgart)

16:40 Impact of elastic modulus evolution on springback prediction - Xavier LEMOINE (ArcelorMittal R&D Maizières)

17:00 Prediction of texture-induced plastic anisotropy in AA6014-T4 aluminium sheets utilising two different crystal plasticity constitutive models - Alexander Wessel (Fraunhofer Institute for Mechanics of Materials IWM, Chair of Metal Forming and Casting, Technical University of Munich)
19:00 IDDRG CEREMONY
IDDRG CEREMONY
19:00 - 22:00
Wednesday, 21 June 2023

08:00 REGISTRATION
REGISTRATION
08:00 - 08:30
08:30 PLENARY TALKS
08:30 - 09:30
Room: 1. Lilla Salen
Contributions

08:30 Press hardening - History, and future - Jan Larsson

09:00 Novel and revisited experiments for plasticity and fracture testing of sheet metals - Vincent Grolleau (ETH Zurich)
09:30 DIGITAL TRANSFORMATION, DIGITALIZATION, SMART PLANTS, SMART PRESSHOPS
09:30 - 10:10
Room: 2. Världsarvet/ Hägnan
Contributions

09:30 On-line quality control and tool wear evaluation in trimming process by data analytics technics - Eduard Garcia Llamas (Fundació Eurecat)

09:50 Application of a neural network for predicting the cutting surface quality of punching processes based on tooling parameters - Adrian Schenek (Institute for Metal Forming Technology)
SPRINGBACK, SHAPE ACCURACY, GEOMETRY ASSURANCE, AND SURFACE QUALITY
09:30 - 10:10
Room: 1. Lilla Salen
Contributions

09:30 Impact of the process velocities on the quality of free-form bent parts - Lorenzo Scandola (Technical University of Munich, Chair of Metal Forming and Casting)

09:50 Study of the Influence of part features of AHSS A-pillar on springback and its robustness - Chao Niu (Baosteel)
10:10 COFFEE BREAK
COFFEE BREAK
10:10 - 10:40
10:40 SPRINGBACK, SHAPE ACCURACY, GEOMETRY ASSURANCE, AND SURFACE QUALITY
10:40 - 12:20
Room: 1. Lilla Salen
Contributions

10:40 Process optimization and robustness analysis for HFQ process using AutoForm-Sigma - Mohamed Mohamed (Impression Technologies Ltd, UK)

11:00 Measurement of skid line formation and formation mechanism of automotive outer panel - Yasuhiro Kishigami (JFE Steel Corporation)

11:20 Effect of strain mode and blank orientation on waviness and its potential improvement in paint appearance of automotive outer panels - Yuguo An (Tata Steel Europe)

11:40 Experimental investigation of the effect of W-temper forming process parameters on springback - Jemal Ebrahim Dessie (Institute of Materials Science & Technology, Faculty of Mechanical Engineering)

12:00 Influence of process and material parameters on the twist springback prediction of a panel - Marta C- Oliveira (CEMMPRE, Department of Mechanical Engineering, University of Coimbra)
TESTING, TESTBEDS
10:40 - 12:20
Room: 2. Världsarvet/ Hägnan
Contributions

10:40 Cruciform tension-shear test for sheet metal and application to material modeling of mild steel sheet - Sota Sato (Tokyo University of Agriculture and Technology)

11:00 Optimised parametrisation of the MMC failure model using acoustic emission and FE analysis - Eugen Stockburger (Institute of Forming Technology and Machines)

11:20 Fracture toughness to assess the effect of trimming on the fatigue behaviour of high-strength steels for chassis parts - Sergi Parareda (Fundació EURECAT, Plaça de la Ciència 2, 08243 Manresa, Spain)

11:40 Innovative experimental setup for the investigation of material models with regard to strain hardening behavior - Lorenz Maier (Technical University of Munich, Chair of Metal Forming and Casting)
12:20 LUNCH
LUNCH
12:20 - 13:20
13:20 SPRINGBACK, SHAPE ACCURACY, GEOMETRY ASSURANCE, AND SURFACE QUALITY
13:20 - 14:20
Room: 1. Lilla Salen
Contributions

13:20 Deformation Prediction of Titanium Alloy in Incremental Sheet Forming with Anisotropic and Asymmetric Yield Function - Minki Kim (Korea Institute of Industrial Technology (KITECH))

13:40 Artificial intelligence-based springback compensation of EV motor component - Hyunsung Choi (Korea Institute of Material Science)

14:00 Formed developables - a new class of sheet metal parts - Jeet Bhuva (Deakin University)
TESTING, TESTBEDS
13:20 - 14:20
Room: 2. Världsarvet/ Hägnan
Contributions

13:20 A uniform method for the characterization of shear fracture strain for high-strength steel sheets under quasi-static and crash loading - Silke Klitschke (Fraunhofer Institut für Werkstoffmechanik IWM)

13:40 Bendability assessment of advanced high strength steels thanks to artificial neural networks - Mihaela Teaca (ARCELORMITTAL)

14:00 EXPERIMENTAL CHARACTERIZATION OF FORMING BEHAVIOR OF 3rd GEN AHSS - Elise Champolivier (ArcelorMittal Global R&D Montataire)
14:20 SHORT BREAK TO CHANGE THE ROOM
SHORT BREAK TO CHANGE THE ROOM
14:20 - 14:25

14:25 ANNOUNCEMENT "IDDRG 2024"
ANNOUNCEMENT "IDDRG 2024"
14:25 - 14:40
Room: 1. Lilla Salen

14:40 IDDRG 2023 CLOSING
IDDRG 2023 CLOSING
14:40 - 14:45
Room: 1. Lilla Salen

14:45 COFFEE BREAK & END OF THE CONFERENCE
COFFEE BREAK & END OF THE CONFERENCE
14:45 - 15:15
Thursday, 22 June 2023

08:00 TECHNICAL TOUR-Gestamp HardTech
TECHNICAL TOUR-Gestamp HardTech
08:00 - 10:00

TECHNICAL TOUR-Scania Luleå
TECHNICAL TOUR-Scania Luleå
08:00 - 10:00

10:00 TECHNICAL TOUR-Gestamp HardTech
TECHNICAL TOUR-Gestamp HardTech
10:00 - 12:00

TECHNICAL TOUR-Scania Luleå
TECHNICAL TOUR-Scania Luleå
10:00 - 12:00

12:00 END OF TECHNICAL TOUR
END OF TECHNICAL TOUR
12:00 - 12:20