Metal Additive Manufacturing Conference - MAMC 2020

Name: Metal Additive Manufacturing Conference - MAMC 2020
Start: 2020-09-30T08:00:00+02:00
End: 2020-10-02T18:00:00+02:00
Location: No location set

30 September 2020 to 2 October 2020 Virtual Conference

Europe/Vienna timezone

Support

Author List

Marawan Abdelwahed
- Co-author in L-PBF PROCESSING OF ALLOY STEEL POWDERS PRODUCED BY GAS AND WATER ATOMIZATION
Mihaela Albu
- Author in CORRELATIVE MICROSCOPY APPLIED FOR INVESTIGATION OF POWDERS AND ADDITIVE MANUFACTURED PARTS
Enrique Ariza
- Co-author in PLASMA METAL DEPOSITION (PMD®) FOR AEROSPACE APPLICATIONS - ENABLING A COST-EFFICIENT TECHNOLOGY FOR HIGH TECH INDUSTRIES
Patrick Aschauer
- Co-author in SELECTIVE MELTING OF METAL POWDER WITH HIGH-POWER LED ENERGY SOURCES (SLEDM)
Nader Asnafi
- Author in METAL ADDITIVE MANUFACTURING OF PRODUCTION TOOLS THROUGH LASER-BASED POWDER BED FUSION - CURRENT POSSIBILITIES AND CONSTRAINTS
Christin Aumayr
- Author in TECHNOLOGICAL AND MECHANICAL ASPECTS OF THE BÖHLER E185 AMPO
Ľuboš Bača (Aerospace & Advanced Composites GmbH)
- Co-author in PLASMA METAL DEPOSITION (PMD®) FOR AEROSPACE APPLICATIONS - ENABLING A COST-EFFICIENT TECHNOLOGY FOR HIGH TECH INDUSTRIES
Ewald Badisch
- Co-author in DEVELOPMENT OD 3D PRINTED TOOLS FOR HIGH TEMPERATURE FORMING OF ALUMINUM
Matej Balazic
- Co-author in MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF HYBRID PROCESS PARTS MADE FROM Ti6Al4V BY LASER POWDER BED FUSION AND DIRECT ENERGY DEPOSITION
Rainer Beccard
- Author in DIGITAL PROCESS CHAINS FOR 3D LASER METAL DEPOSITION (LMD) ON FREE FORM PARTS
Stefan Belitz
- Author in HYBRID-ADDITIVE MANUFACTURING OF TOOL COMPONENTS: INVESTIGATION OF MECHANICAL PROPERTIES AND CONNECTION STRENGTH TO THE SUBSTRATE
Abdellatif Bey-Temsamani
- Author in SIMULATION-BASED SUPPORT STRUCTURES GENERATION FOR METAL 3D PRINTING PREDICTIVE LAYER PER LAYER THERMAL ANALYSIS AND EXPERIMENTAL VALIDATION
Martin Bielik (RHP-Technology GmbH)
- Author in PLASMA METAL DEPOSITION (PMD®) FOR AEROSPACE APPLICATIONS - ENABLING A COST-EFFICIENT TECHNOLOGY FOR HIGH TECH INDUSTRIES
Matthias Bleckmann
- Co-author in A NON-DESTRUCTIVE METHOD FOR SURFACE ROUGHNESS MEASUREMENT AT INACCESSIBLE SPOTS ON AS-BUILT LASER POWDER BED FUSED SURFACES
Benedikt Blitz
- Author in UPDATE ON THE WORLD MARKET FOR METAL POWDERS & STEELS
Massimiliano Bonesso
- Author in LASER POWDER BED FUSION OF COPPER
- Co-author in REFRACTORY METALS FABRICATED BY LASER POWDER BED FUSION
Francesca Bonfanti (Mimete Srl)
- Author in EFFECT OF SHAPE AND TESTING METHOD ON PSD DETERMINATION OF METAL POWDERS
- Author in EXPERIMENTAL METHODS TO DETECT METAL POWDER CONTAMINATION
Anderson Vicente Borille
- Co-author in SURFACE INTEGRITY OF CARBURIZING STEEL GEARS INDUCED BY SELECTIVE LASER MELTING CHAINS
Elmar Brandstätter
- Co-author in L-DED (LASER-DIRECTED ENERGY DEPOSITION): AN ALTERNATIVE 3D-PRINTING-TECHNOLOGY
Anders Brantnell
- Author in HOW ADDITIVE MANUFACTURING IMPACT BUSINESS MODELS
Tobias Brune
- Co-author in USING DIFFERENT MEASURING METHODS FOR POWDER CHARACTERIZATION OF METAL POWDER FOR ADDITIVE MANUFACTURING
Irene Calliari
- Co-author in LASER POWDER BED FUSION OF COPPER
Santiago Cano
- Co-author in MULTIMATERIAL COMPONENTS BY FFF
Riccardo Casati
- Co-author in L-PBF PROCESSING OF ALLOY STEEL POWDERS PRODUCED BY GAS AND WATER ATOMIZATION
Ulrike Cihak-Bayr
- Co-author in DEVELOPMENT OD 3D PRINTED TOOLS FOR HIGH TEMPERATURE FORMING OF ALUMINUM
Crawford Cullen (University of Strathclyde, Advanced Forming Research Centre)
- Co-author in REMANUFACTURE OF HOT FORGING DIES BY LMD-p USING A COBALT BASED HARD-FACING ALLOY
Herbert Danninger
- Co-author in INVESTIGATION OF THE INFLUENCE OF POWDER MOISTURE ON THE SPREADABILITY USING THE SPREADING TESTER
- Co-author in PROCESSABILITY OF MOIST SUPERALLOY POWDER BY SLM
Ryan Devine
- Author in REMANUFACTURE OF HOT FORGING DIES BY LMD-p USING A COBALT BASED HARD-FACING ALLOY
Simon Donovan (Rolls-Royce plc)
- Co-author in EFFECT OF DEPOSITION ANGLES ON LASER BLOWN POWDER OF THIN-WALLED STRUCTURES
Martin Dopler
- Author in ENERGY CONSUMPTION IN METAL POWDER PRODUCTION
Marie Fischer
- Co-author in MOISTURE IN METAL POWDER, AND ITS IMPLICATION FOR PROCESSABILITY IN L-PBF AND ELSEWHERE
Stephen Fitzpatrick (University of Strathclyde, Advanced Forming Research Centre)
- Co-author in REMANUFACTURE OF HOT FORGING DIES BY LMD-p USING A COBALT BASED HARD-FACING ALLOY
Jim Foster
- Co-author in REMANUFACTURE OF HOT FORGING DIES BY LMD-p USING A COBALT BASED HARD-FACING ALLOY
Enrico Gelain
- Co-author in EXPERIMENTAL METHODS TO DETECT METAL POWDER CONTAMINATION
Claudio Gennari (INFN Padova)
- Co-author in REFRACTORY METALS FABRICATED BY LASER POWDER BED FUSION
Christian Gierl-Mayer
- Co-author in INVESTIGATION OF THE INFLUENCE OF POWDER MOISTURE ON THE SPREADABILITY USING THE SPREADING TESTER
- Co-author in PROCESSABILITY OF MOIST SUPERALLOY POWDER BY SLM
Riccardo Girelli
- Co-author in EXPERIMENTAL METHODS TO DETECT METAL POWDER CONTAMINATION
Joamin Gonzalez-Gutierrez
- Co-author in MULTIMATERIAL COMPONENTS BY FFF
Richard Görgl
- Author in L-DED (LASER-DIRECTED ENERGY DEPOSITION): AN ALTERNATIVE 3D-PRINTING-TECHNOLOGY
Rudolf Gradinger
- Author in NOVEL METHODS OF PRODUCING 3D HOLLOWS IN PARTS PRODUCED BY DED TECHNOLOGIES
Gregor Graf
- Author in EFFICIENT QUALIFICATION STRATEGY OF NEW TOOL STEEL ALLOYS FOR LASER POWDER BED FUSION
Harald Gschiel
- Co-author in INVESTIGATION OF THE INFLUENCE OF POWDER MOISTURE ON THE SPREADABILITY USING THE SPREADING TESTER
- Co-author in PROCESSABILITY OF MOIST SUPERALLOY POWDER BY SLM
Guilherme Fernandes Guimarães
- Co-author in SURFACE INTEGRITY OF CARBURIZING STEEL GEARS INDUCED BY SELECTIVE LASER MELTING CHAINS
Franz Haas
- Author in SELECTIVE MELTING OF METAL POWDER WITH HIGH-POWER LED ENERGY SOURCES (SLEDM)
Wolfgang Hansal (RENA Technologies Austria GmbH)
- Author in USER-CASE: THE LONG WAY FROM AN INNOVATIVE IDEA TO A 3D-PRINTED INDUSTRIALLY APPLICABLE METAL PART
Markus Hatzenbichler
- Co-author in PROCESSABILITY OF MOIST SUPERALLOY POWDER BY SLM
Clemens Holzer
- Co-author in MULTIMATERIAL COMPONENTS BY FFF
Johannes Homa (Lithoz GmbH)
- Author in ADDITIVE MANUFACTURING IN AUSTRIA - PAST, PRESENT AND FUTURE
Johannes Homa
- Author in ROAD TO SUCCESS - CROSS-DOMAIN INNOVATION IN METAL ADDITIVE MANUFACTURING
Reinhard Hubmann
- Co-author in DEVELOPMENT OD 3D PRINTED TOOLS FOR HIGH TEMPERATURE FORMING OF ALUMINUM
Christopher Hulme-Smith
- Author in SPREADABILITY TESTING OF POWDER FOR ADDITIVE MANUFACTURING
- Co-author in MOISTURE IN METAL POWDER, AND ITS IMPLICATION FOR PROCESSABILITY IN L-PBF AND ELSEWHERE
Panaitescu Ileana
- Author in DEVELOPMENT OD 3D PRINTED TOOLS FOR HIGH TEMPERATURE FORMING OF ALUMINUM
Ana Gabrielle Impere
- Co-author in SURFACE INTEGRITY OF CARBURIZING STEEL GEARS INDUCED BY SELECTIVE LASER MELTING CHAINS
Georg Kalss
- Co-author in USER-CASE: THE LONG WAY FROM AN INNOVATIVE IDEA TO A 3D-PRINTED INDUSTRIALLY APPLICABLE METAL PART
Christian Katsich
- Co-author in DEVELOPMENT OD 3D PRINTED TOOLS FOR HIGH TEMPERATURE FORMING OF ALUMINUM
Michael Kitzmantel
- Co-author in MULTIMATERIAL COMPONENTS BY FFF
- Co-author in PLASMA METAL DEPOSITION (PMD®) FOR AEROSPACE APPLICATIONS - ENABLING A COST-EFFICIENT TECHNOLOGY FOR HIGH TECH INDUSTRIES
Gerald Kothleitner
- Co-author in CORRELATIVE MICROSCOPY APPLIED FOR INVESTIGATION OF POWDERS AND ADDITIVE MANUFACTURED PARTS
Christian Kukla
- Author in MULTIMATERIAL COMPONENTS BY FFF
Mykola Kulakov
- Co-author in REMANUFACTURE OF HOT FORGING DIES BY LMD-p USING A COBALT BASED HARD-FACING ALLOY
Anna Larsson
- Co-author in L-PBF PROCESSING OF ALLOY STEEL POWDERS PRODUCED BY GAS AND WATER ATOMIZATION
Harald Leitner
- Co-author in DEFECT AND MICROSTRUCTURE CHARACTERIZATION OF LASER POWDER BED FUSED COLD-WORK TOOL STEEL
Katharina Leitner
- Co-author in TECHNOLOGICAL AND MECHANICAL ASPECTS OF THE BÖHLER E185 AMPO
Denis Lima
- Co-author in SURFACE INTEGRITY OF CARBURIZING STEEL GEARS INDUCED BY SELECTIVE LASER MELTING CHAINS
Carlos Lopez
- Co-author in SIMULATION-BASED SUPPORT STRUCTURES GENERATION FOR METAL 3D PRINTING PREDICTIVE LAYER PER LAYER THERMAL ANALYSIS AND EXPERIMENTAL VALIDATION
Andreas Ludwig
- Co-author in NUMERICAL SIMULATION OF HEAT TREATMENT OF Ti6Al4V BY USING A PHASE FIELD METHOD BASED SOFTWARE
Conor MacFadden
- Co-author in REMANUFACTURE OF HOT FORGING DIES BY LMD-p USING A COBALT BASED HARD-FACING ALLOY
Chiara Malaspina
- Co-author in EFFECT OF SHAPE AND TESTING METHOD ON PSD DETERMINATION OF METAL POWDERS
- Co-author in EXPERIMENTAL METHODS TO DETECT METAL POWDER CONTAMINATION
Lorenzo Marchetti
- Co-author in MOISTURE IN METAL POWDER, AND ITS IMPLICATION FOR PROCESSABILITY IN L-PBF AND ELSEWHERE
Clemens Maucher
- Author in MASTERING THE ADDITIVE-SUBSTRATIVE PROCESS CHAIN
Brian McAuliffe (Lufthansa Technick Turbine Shannon)
- Co-author in EFFECT OF DEPOSITION ANGLES ON LASER BLOWN POWDER OF THIN-WALLED STRUCTURES
Benjamin Meier
- Author in MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF HYBRID PROCESS PARTS MADE FROM Ti6Al4V BY LASER POWDER BED FUSION AND DIRECT ENERGY DEPOSITION
- Co-author in EFFECT OF PROCESS PARAMETERS ON DENSITY, POROSITY AND MICROSTRUCTURE OF SELECTIVELY LASER-MELTED Ti6Al7Nb ALLOY
Martina Meisnar (Materials & Processes Engineer, European Space Agency)
- Author in ADDITIVE MANUFACTURING AT ESA - ACHIEVEMENTS, LESSONS LEARNED AND THE NEXT CHALLENGES
John Meuthen
- Co-author in PLASMA METAL DEPOSITION (PMD®) FOR AEROSPACE APPLICATIONS - ENABLING A COST-EFFICIENT TECHNOLOGY FOR HIGH TECH INDUSTRIES
Marco Mitterlehner
- Author in INVESTIGATION OF THE INFLUENCE OF POWDER MOISTURE ON THE SPREADABILITY USING THE SPREADING TESTER
- Author in PROCESSABILITY OF MOIST SUPERALLOY POWDER BY SLM
Johann Mogeritsch
- Author in NUMERICAL SIMULATION OF HEAT TREATMENT OF Ti6Al4V BY USING A PHASE FIELD METHOD BASED SOFTWARE
Christian Möhring (University of Stuttgart)
- Co-author in MASTERING THE ADDITIVE-SUBSTRATIVE PROCESS CHAIN
Adrien Mouchard
- Author in EFFECT OF DEPOSITION ANGLES ON LASER BLOWN POWDER OF THIN-WALLED STRUCTURES
Erich Neubauer
- Co-author in PLASMA METAL DEPOSITION (PMD®) FOR AEROSPACE APPLICATIONS - ENABLING A COST-EFFICIENT TECHNOLOGY FOR HIGH TECH INDUSTRIES
Lars Nyborg
- Co-author in MOISTURE IN METAL POWDER, AND ITS IMPLICATION FOR PROCESSABILITY IN L-PBF AND ELSEWHERE
Simon Okwir
- Author in HOW ADDITIVE MANUFACTURING IMPACT BUSINESS MODELS
Kristin Paetzold
- Co-author in A NON-DESTRUCTIVE METHOD FOR SURFACE ROUGHNESS MEASUREMENT AT INACCESSIBLE SPOTS ON AS-BUILT LASER POWDER BED FUSED SURFACES
Gerhard Panzl
- Co-author in NUMERICAL SIMULATION OF HEAT TREATMENT OF Ti6Al4V BY USING A PHASE FIELD METHOD BASED SOFTWARE
Mellin Pelle
- Author in MOISTURE IN METAL POWDER, AND ITS IMPLICATION FOR PROCESSABILITY IN L-PBF AND ELSEWHERE
Adriano Pepato
- Co-author in LASER POWDER BED FUSION OF COPPER
- Co-author in REFRACTORY METALS FABRICATED BY LASER POWDER BED FUSION
Stefano Petrella
- Co-author in L-PBF PROCESSING OF ALLOY STEEL POWDERS PRODUCED BY GAS AND WATER ATOMIZATION
Vojislav Petrovic-Filipovic
- Co-author in EFFECT OF PROCESS PARAMETERS ON DENSITY, POROSITY AND MICROSTRUCTURE OF SELECTIVELY LASER-MELTED Ti6Al7Nb ALLOY
- Co-author in L-DED (LASER-DIRECTED ENERGY DEPOSITION): AN ALTERNATIVE 3D-PRINTING-TECHNOLOGY
Jelena Petruša
- Author in EFFECT OF PROCESS PARAMETERS ON DENSITY, POROSITY AND MICROSTRUCTURE OF SELECTIVELY LASER-MELTED Ti6Al7Nb ALLOY
Martin Pfaffeneder-Kmen (RENA Technologies Austria Gmbh)
- Co-author in USER-CASE: THE LONG WAY FROM AN INNOVATIVE IDEA TO A 3D-PRINTED INDUSTRIALLY APPLICABLE METAL PART
Tanja Pfeifer
- Author in 3D PRINTING CHALLENGES FOR SERIES VALIDATION
Tobias Pichler
- Author in GEOMETRY SPECIFIC PROCESS CONTROL FOR LASER POWDER BED FUSION USING THE EXAMPLE OF Ti6Al4V
Jan Platl
- Author in DEFECT AND MICROSTRUCTURE CHARACTERIZATION OF LASER POWDER BED FUSED COLD-WORK TOOL STEEL
Michael Pomeroy (Bernal Institute, University of Limerick)
- Co-author in EFFECT OF DEPOSITION ANGLES ON LASER BLOWN POWDER OF THIN-WALLED STRUCTURES
Masoud Rashidi
- Co-author in MOISTURE IN METAL POWDER, AND ITS IMPLICATION FOR PROCESSABILITY IN L-PBF AND ELSEWHERE
Johannes Rattenberger
- Co-author in CORRELATIVE MICROSCOPY APPLIED FOR INVESTIGATION OF POWDERS AND ADDITIVE MANUFACTURED PARTS
Pietro Rebesan
- Author in REFRACTORY METALS FABRICATED BY LASER POWDER BED FUSION
- Co-author in LASER POWDER BED FUSION OF COPPER
Ronnie Rego
- Co-author in SURFACE INTEGRITY OF CARBURIZING STEEL GEARS INDUCED BY SELECTIVE LASER MELTING CHAINS
Lucas Robatto
- Author in SURFACE INTEGRITY OF CARBURIZING STEEL GEARS INDUCED BY SELECTIVE LASER MELTING CHAINS
Jeremy Robinson (School of Engineering, University of Limerick)
- Co-author in EFFECT OF DEPOSITION ANGLES ON LASER BLOWN POWDER OF THIN-WALLED STRUCTURES
Manel Rodríguez Ripoll
- Co-author in DEVELOPMENT OD 3D PRINTED TOOLS FOR HIGH TEMPERATURE FORMING OF ALUMINUM
Guilherme José Santos
- Co-author in SURFACE INTEGRITY OF CARBURIZING STEEL GEARS INDUCED BY SELECTIVE LASER MELTING CHAINS
Thomas Schalkhammer
- Co-author in DEVELOPMENT OD 3D PRINTED TOOLS FOR HIGH TEMPERATURE FORMING OF ALUMINUM
Johannes Henrich Schleifenbaum
- Co-author in GEOMETRY SPECIFIC PROCESS CONTROL FOR LASER POWDER BED FUSION USING THE EXAMPLE OF Ti6Al4V
Martin Schnall
- Co-author in NOVEL METHODS OF PRODUCING 3D HOLLOWS IN PARTS PRODUCED BY DED TECHNOLOGIES
Ronald Schnitzer
- Co-author in DEFECT AND MICROSTRUCTURE CHARACTERIZATION OF LASER POWDER BED FUSED COLD-WORK TOOL STEEL
Alexander Sieger
- Author in HOW CAN AM TOOLS CONTRIBUTE TO REDUCING THE CO2 FOOTPRINT?
Jurgen Stampfl
- Author in FRACTURE MECHANICAL ASPECTS RELATED TO THE LITHOGRAPHY BASED ADDITIVE MANUFACTURING OF METALS, CERAMICS AND POLYMERS
Nils Stelzer (Aerospace & Advanced Composites GmbH)
- Co-author in PLASMA METAL DEPOSITION (PMD®) FOR AEROSPACE APPLICATIONS - ENABLING A COST-EFFICIENT TECHNOLOGY FOR HIGH TECH INDUSTRIES
Annika Strondl
- Co-author in MOISTURE IN METAL POWDER, AND ITS IMPLICATION FOR PROCESSABILITY IN L-PBF AND ELSEWHERE
Olga Sulcova
- Author in 3D PRINTING CHALLENGES FOR SERIES VALIDATION
Bengtsson Sven
- Co-author in L-PBF PROCESSING OF ALLOY STEEL POWDERS PRODUCED BY GAS AND WATER ATOMIZATION
David Tanner
- Co-author in EFFECT OF DEPOSITION ANGLES ON LASER BLOWN POWDER OF THIN-WALLED STRUCTURES
Serdar Temiz
- Author in HOW ADDITIVE MANUFACTURING IMPACT BUSINESS MODELS
Michele Tosi
- Co-author in EFFECT OF SHAPE AND TESTING METHOD ON PSD DETERMINATION OF METAL POWDERS
Christoph Turk
- Co-author in DEFECT AND MICROSTRUCTURE CHARACTERIZATION OF LASER POWDER BED FUSED COLD-WORK TOOL STEEL
Giorgio Vattasso
- Co-author in EXPERIMENTAL METHODS TO DETECT METAL POWDER CONTAMINATION
Maurizio Vedani
- Author in L-PBF PROCESSING OF ALLOY STEEL POWDERS PRODUCED BY GAS AND WATER ATOMIZATION
- Co-author in REFRACTORY METALS FABRICATED BY LASER POWDER BED FUSION
Dries Verhees
- Co-author in SIMULATION-BASED SUPPORT STRUCTURES GENERATION FOR METAL 3D PRINTING PREDICTIVE LAYER PER LAYER THERMAL ANALYSIS AND EXPERIMENTAL VALIDATION
Wolfgang Waldhauser
- Co-author in EFFECT OF PROCESS PARAMETERS ON DENSITY, POROSITY AND MICROSTRUCTURE OF SELECTIVELY LASER-MELTED Ti6Al7Nb ALLOY
- Co-author in MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF HYBRID PROCESS PARTS MADE FROM Ti6Al4V BY LASER POWDER BED FUSION AND DIRECT ENERGY DEPOSITION
Alexander Walzl
- Co-author in NUMERICAL SIMULATION OF HEAT TREATMENT OF Ti6Al4V BY USING A PHASE FIELD METHOD BASED SOFTWARE
Peter Weiland
- Co-author in USING DIFFERENT MEASURING METHODS FOR POWDER CHARACTERIZATION OF METAL POWDER FOR ADDITIVE MANUFACTURING
Armin Wiedenegger
- Author in HOW CAN AM TOOLS CONTRIBUTE TO REDUCING THE CO2 FOOTPRINT?
Yannik Wilkens
- Author in USING DIFFERENT MEASURING METHODS FOR POWDER CHARACTERIZATION OF METAL POWDER FOR ADDITIVE MANUFACTURING
Laura Wirths
- Author in A NON-DESTRUCTIVE METHOD FOR SURFACE ROUGHNESS MEASUREMENT AT INACCESSIBLE SPOTS ON AS-BUILT LASER POWDER BED FUSED SURFACES
Henning Zeidler
- Co-author in HYBRID-ADDITIVE MANUFACTURING OF TOOL COMPONENTS: INVESTIGATION OF MECHANICAL PROPERTIES AND CONNECTION STRENGTH TO THE SUBSTRATE