9th ECCC European Continuous Casting Conference – ECCC 2017

Name: 9th ECCC European Continuous Casting Conference – ECCC 2017
Start: 2017-06-26T08:00:00+02:00
End: 2017-06-29T18:00:00+02:00
Location: Austria Center Vienna

26–29 Jun 2017

Austria Center Vienna

Europe/Vienna timezone

Speaker List

Gerrit Abbel
- Speaker at In or On? About inclusion entrapment in slabs leading to clean steel defects
Marco Alloni
- Speaker at Study on thermal properties of a low fluorine mold flux
Gonzalo Alvarez de Toledo
- Speaker at Atypical secondary oscillation marks formation with abnormal oscillation settings
- Speaker at Influence of MnS secondary precipitation on the hot ductility trough and surface defects of as cast billets
Johannes Atzlesberger
- Speaker at Continuous heat temperature measurement in the tundish
Fabiano Barbosa (ArcelorMittal Tubarão Gerência de Unidade Técnica da Aciaria)
- Speaker at ArcelorMittal Tubarão production increase through continuous casting improvements
Philippe BARREAU
- Speaker at Pre-evaluation of as-cast round bloom quality from monitoring of process records and temperature measurements
Narottam Behera
- Speaker at Investigation of the causes of ladle nozzle clogging during steel pouring
Christian Bernhard (ECCC 2017 - Chairman (Montanuniversität Leoben))
- Speaker at Opening ECCC2017
Denijel Burzic
- Speaker at Latest innovations in bloom casting at Hyundai Steel Dangjin
Paolo Cancian
- Speaker at CMT „Continuous Minimill Technology“ for efficient production of long products
Luca Cestari
- Speaker at Modeling complex caster layouts and material flows through discrete event simulation
Kinnor Chattopadhyay
- Speaker at Open eye formation in a slab caster tundish: Cause and effects
Jung Wook Cho
- Speaker at Innovative ideas for successful continuous casting of high aluminum AHSS
- Speaker at Smart mold flux of dual viscous functions for good lubrication and prevention of slag entrainment in a continuous steel caster mold
Sangbae Choi
- Speaker at Simulations to design thin slab casting SEN and the SEN's applications at work
Rudolf Cihal
- Speaker at Slab stacking automation in the hot slab yard as key factor for postprocessing of cast slabs
Maïté CORNILLE
- Speaker at Mold Level Scanning, a new tool to characterize steel flows in mold
Adam Cwudzinski
- Speaker at Numerical analysis of influence of modern ladle shroud for hydrodynamic conditions of liquid steel flow in one strand slab tundish
Andrea De Luca
- Speaker at Productivity Record @ 75tpy in a single endless line for bars
Alexandre Dolabella Resende
- Speaker at Tundish furniture optimization to maximize steel quality
Jean-François Domgin
- Speaker at Mould flow monitoring solution: An on-line tool to characterize flows in CC mould
Andreas Eichinger
- Speaker at Technological solutions for the revamp of long product casters
Mauro Fabrizioli
- Speaker at Accurate mould powder thickness measuring and mould level measuring with one radiometric sensor
- Speaker at Reliable and radiation-free mould level control system in open steel casting based on smart thermal control system
Stephan Feldhaus
- Speaker at Continuous casting machine for oversized blooms
Magdy Feshar
- Speaker at Longitudinal Facial Crack (LFC) in thin slab casting
Lothar Fischer (SMS group GmbH)
- Speaker at Casting of stainless steels and special steel grades
- Speaker at Hebei Puyang Iron and Steel Co., Ltd. (Puyang Steel), China, successfully commissioned continuous slab caster
Lothar Fischer
- Speaker at Future-oriented modernization concepts with proven technology for continuous casting plants
Marcellino Fornasier
- Speaker at The world thickest (355 mm) austenitic stainless steel slab ever cast - ArcelorMittal Industeel in Belgium
- Speaker at Dynamic soft reduction for round blooms: New concept and experience
- Speaker at A new benchmack in largest round bloom casters
Christian Froehling
- Speaker at E-CO Energy Collector – Energy recovery on the continuous caster at Salzgitter Flachstahl
Bastien GERARD
- Speaker at Weld-overlay – How to make the best choice to extend the service life of your continuous casting rolls
Karel Gryc
- Speaker at Determination of critical bath level in the tundish by physical modelling
Liangliang GUO
- Speaker at Cooling behavior in continuous casting with hot-top mold
Roderick Guthrie
- Speaker at The effect of the position of a submerged entry nozzle (SEN) exit ports on fluid flows, and meniscus stability, for square billet casting molds
Yanshen HAN
- Speaker at Influence of non-uniform water distribution and water coverage ratio on cooling effect in secondary cooling zone for 82B steel continuous casting billet
Kurt Herzog
- Speaker at CCM 4.0 – digitalization for intelligent production in continuous casting
Martin Hirschmanner
- Speaker at Maintenance of continuous casters for high product quality: Simple measures and advanced tools
Mario Hirth (Primetals Technologies Austria GmbH)
- Speaker at LiquiRob – Next level shroud manipulation – from an idea to an industrial solution in 3 major steps
Gerhard Holzinger
- Speaker at Tundish inclusion removal modelling implemented in OpenFOAM
Paavo Hooli
- Speaker at Real time monitoring of hot steel slabs during casting and automatic slab surface quality assessment enabling fast utilization of quality information feedback – for planning of grinding, fast evaluation of trials and online feedback of maintenance needs.
Gerald Hrazdera
- Speaker at Semi-continuous casting technology – Combining technological advantages of two different casting practices
Adam Hunt
- Speaker at Novel techniques for controlling heat transfer in the mould-strand gap
Jong-Yeon Hwang
- Speaker at Numerical Simulation of turbulent Steel CEM® mold under high mass flow condition
Mihaiela Isac
- Speaker at The effect of the position of a submerged entry nozzle (SEN) exit ports on fluid flows, and meniscus stability, for square billet casting molds
Nils Jacobson
- Speaker at Flow control by FC Mold G3, operation and result from slab casting process.
Steven Jansto
- Speaker at Carbon content, solidification and strain energy phenomena affecting hot ductility behavior during continuous casting of microalloy steels
Olivier JAOUEN
- Speaker at Study of the interaction between slag and cast alloy at meniscus and mold contact in continuous casting process with a 3D multi-physics fluid/stucture numerical simulation model
Mirko Javurek
- Speaker at Secondary cooling with pulsed sprays: Enhanced cooling range and lower operating costs
Dino Kabosch
- Speaker at New electrical oscillation drive with adjustable stroke and frequency during operation
Rudi Kalter
- Speaker at Breakout reduction by prevention of splashes at start of cast in the Tata Steel IJmuiden thin slab caster
Shin Eon Kang
- Speaker at The influence of compositions on hot ductility of high Al TWIP steels
Youn-Bae Kang
- Speaker at A reaction mechanism and model for the composition change of mold flux during continuous casting of high Al steel
- Speaker at Interfacial reaction between ultra low C steel and refractory material used for submerged entry nozzle for continuous casting
Abdullah Kareem
- Speaker at Superheat range optimization and evaluation of continuous temperature measurement system in tundish
Jens Kempken
- Speaker at PQA-the successfactor to reach next performance level in continuous casting
Oleg Khlybov (JSC "Vyksa Steel Works")
- Speaker at FEM modeling of thin slab continuous casting strain-stress state
TAE-SUNG KIM
- Speaker at Influence of rice husk ash on the reoxidation of molten steel in continuous casting tundish
Sun-joong Kim
- Speaker at Precipitation of CaS from CaO-Al2O3 type inclusion
Seong-beum Kim
- Speaker at Grain refinement of solidification structure by direct inoculation
Jijoon Kim
- Speaker at Improvement of surface quality during continuous casting of type 304 stainless steel
Martin Klein
- Speaker at HD scan – Ultrasound scans slab quality
Franz Kolmbauer
- Speaker at Advanced mold copper plating - Variable hiper coating
Ravishekar Konangi
- Speaker at Ladle purging versus tundish purging during casting for enhanced inclusion removal efficiency
Roman Krobath
- Speaker at Study on transversal crack formation in Al-killed medium carbon steel by in-situ bending tests
Jan Kromhout
- Speaker at A novel view on casting performance: Application of fiber bragg gratings for slab casting
Sang-Hyeon Lee
- Speaker at State of the art technology in slab continuous casting: A casting speed point of view in POSCO
Sangmin Lee
- Speaker at Experiences of pilot slab caster for development of advanced casting technologies
Ho-yeol Lee (POSCO)
- Speaker at Investigation on interfacial tension between the slag and initial solidification shell affecting sliver defects
Ke Liu
- Speaker at Numerical simulation on soft reduction parameters design to aviod internal cracks in slab casting
Yan-zhao Luo (Shougang Research Institute of Technology)
- Speaker at Investigation of cleanliness in two-strand tundish with different dams
Federica Mantovani
- Speaker at A new instrumented mold powder diffuser with built-in optical sensor for powder thickness control
Irmtraud Marschall
- Speaker at Slag rim formation of two mold powders used for casting of construction steel
Oliver Mathews
- Speaker at Mould developments for high speed casting
Michael McDonald
- Speaker at Slab section thickness, precipitation and off-corner cracking in microalloyed plate steel.
Kerstin Meder
- Speaker at Dillinger’s new continuous caster no. 6
Juho Moilanen (Outokumpu Stainless Oy)
- Speaker at Unsteady bulging compensation at Outokumpu Tornio Caster 1 and 2 – Stable meniscus during casting of ferritic stainless steel
Jürgen Morosz
- Speaker at Slab milling - Postprocessing of slabs in hot condition
Salem Mosbah
- Speaker at Experimental and numerical modeling of solidification grain structure and segregation in stainless steel continuous casting process
Guo Muxing
- Speaker at Research of clogging in continuous casting nozzles at KU Leuven
Noritaka Nishiguchi
- Speaker at Recent development to improve cleanliness of bearing steel
Gerald Nitlz
- Speaker at Energy saving Monolithic ISO Components for Flow-Control and Clean-Steel
Oleksii Novokoshonov
- Speaker at New 5-strand bloom continuous casting machine with soft reduction for high-end tire-cord production
KYUNG-SHIK OH
- Speaker at Initial solidification behavior in extra large CC mold at ultra low casting speed
Shimpei Okayasu
- Speaker at Rolling technologies for the direct strip casting process
Johann Penn
- Speaker at New generation of continuous casting plants with intelligent manufacturing strategy
Paul Pennerstorfer
- Speaker at DynaJet Flex – Ultimate flexibility in secondary cooling
Sunilkumar Pillai
- Speaker at Installation of dynamic soft reduction system in slab caster to improve hot rolled steel quality
Tomas Pindur
- Speaker at VUHZ electromagnetic mold level measuring system on thin slab caster equipped with electromagnetic mold brake
Andreas Pissenberger (voestalpine Stahl GmbH)
- Speaker at Segregation measurements of slabs produced with soft reduction
Peter Presoly (Montanuniversität Leoben)
- Speaker at Further development and validation of IDS by means of selected experiments
Lukas Preuler
- Speaker at Experimental investigations on spray characteristics of water/air nozzles.
Stefan Puttinger
- Speaker at Modelling slag entrainment in the continuous casting mold with LES-VOF simulations and comparison to a water/oil benchmark experiment
Matthias Ratajczak
- Speaker at Developments in the application of contactless inductive flow tomography
Miroslav Raudensky
- Speaker at Optimization of cooling in nozzle overlapping area of continuous casting by using experiments and mathematical models
johan richaud
- Speaker at Ladle purging versus tundish purging during casting for enhanced inclusion removal efficiency
- Speaker at Refractory design and process optimization in Tata CSP® caster
Benjamin Rivaux
- Speaker at Chamfer mold technology for corner cracks reduction: Understanding and design optimization through numerical simulation
- Speaker at Hot tearing prediction during casting of steel through thermomechanical simulation: Comparison with laboratory and semi-industrial experiment
Albert Rödfalk
- Speaker at Implementation of silicon based photomultiplier technology for radiometric sensors for mould level measurement
P P Sahoo
- Speaker at Identification of peritectic grades of steel using high temperature phase transformation studies
Begoña Santillana
- Speaker at Influence of casting parameters in segregation and cracking – Assessment with OES-PDA method
Markus Schäperkötter
- Speaker at Industrial investigations of fiber optical sensor instrumented thick slab caster mould
Matthias Schmitz
- Speaker at HKM operation results: Effective use of PT process models
Alfred Schmuckermayer
- Speaker at Highly flexible deburring grinding machine for a reliable burr removal at front, tail and side edges of continuously cast slabs, blooms or billets
Gerold Schoeftner-Gruebl
- Speaker at High speed casting and the innovative WinLink Mini Mill at GPH Bangladesh
Dennis Schurmann
- Speaker at Ultrasonic measurements in a model experiment for continuous casting of round blooms with magnetic stirring in the submerged entry nozzle
Martin Seden
- Speaker at Securing dynamic mold flow control with FC mold and OptiMold monitor
A Sengupta
- Speaker at Phase-field based solidification model for binary alloy in OpenFOAM
Dieter Senk
- Speaker at Continuous Casting between Hopes and Reality
- Speaker at MAXILA - A rapid process for analysis of macro-segregation
Dieter Senk
- Speaker at High temperature embrittlement of 2nd and 3rd generation advanced high strength steels
Frank Seuffert (SMS group GmbH)
- Speaker at New micro-mill concepts
Mustafa Seyrek
- Speaker at Effect of CaO/Al2O3 ratio on steel-slag interaction for high-Al steel casting
Hitesh Hasmukhrai Shah
- Speaker at Refractory design and process optimization in Tata CSP® caster
Jaehong Shin
- Speaker at Thermochemical and kinetic modeling for the evolution of non-metallic inclusions during ladle refining and continuous casting processes
Stephan Six
- Speaker at STEC-Roll® - High endurance, easy maintenance
Bastien Soete
- Speaker at Tundish flow optimization in Aperam Genk for quality improvement
Georg Stechauner
- Speaker at Impact of various refractory materials on the wear of stopper rods
Josef Stetina
- Speaker at Utilization of the fuzzy logic regulator and solidification model for improvement the quality of structural S355 steel
Kenji Taguchi
- Speaker at Hot temperature embrittlement of continuously cast slab of boron containing steel
Tomaso Tosolini
- Speaker at Quality tracking and yield optimization in a continuous caster with mechanical soft reduction
Tu Tran
- Speaker at New insights into the effect of steel chemistry and caster design on microalloying precipitation and surface quality of low carbon boron steels
Carsten Tscheuschner
- Speaker at Analysis and optimisation of mould cooling conditions by application of CFD modelling and verification in industrial trials
KOICHI TSUTSUMI
- Speaker at Development of mist spray nozzle of saving energy type in a continuous casting process
Alexander Vakhrushev
- Speaker at Influence of the free surface oscillation on the SEN flow prediction for the thin slab casting
Robert Vertnik
- Speaker at Simulation of continuous casting of steel with EM stirring
Norbert Vogl
- Speaker at Coupled fluid dynamic and electromagnetic calculation of mold and secondary cooling region in a continuous caster
Klaus von Eynatten
- Speaker at Developments for a hydraulic free casting platform for continuous casting to improve operational and production safety
- Speaker at Segment casting – A semi-continuous casting technology for high-end semi-finished steel products
Minglin Wang
- Speaker at Retention characteristics of ultra-low carbon steel slab corner shape and its influence on edge defects of steel strip
Josef Watzinger
- Speaker at Study on spray cooling for voestalpine CC4 slab caster
Josef Watzinger (Primetals Technologies Austria GmbH)
- Speaker at Arvedi ESP’s caster skills to enter a new world of endless production
Oliver Wiens
- Speaker at Continuous casting mold goes digital…
Franz Wimmer
- Speaker at Operation results of vertical casting of heavy round blooms at Zhong Yuan Special Steel
Guangmin Xia
- Speaker at An investigation of precipitation in continuous steel slab with the help of dissolution technology
Changhong Ye
- Speaker at Development and industrialization of strip casting technology in Baosteel
sadik yetkin
- Speaker at The Influence of Casting Speed, Mould Powder and Oscillation Parameters on Mould Level Fluctuation
Hongbin Yin
- Speaker at Investigation of mold slag film sampled right below meniscus
Shin Yoo
- Speaker at Slag entrapment behavior of molten mold flux technology
Zhi Zeng
- Speaker at Primary cooling control for high-speed slab continuous casting up to 2.50 m/min
Hui Zhang
- Speaker at Retention characteristics of ultra-low carbon steel slab corner shape and its influence on edge defects of steel strip
Xubin ZHANG
- Speaker at Oscillation marks and subsurface hooks in continuous casting slabs of ultra-low-carbon steel
Lifeng Zhang
- Speaker at Oscillation marks and subsurface hooks in continuous casting slabs of ultra-low-carbon steel
- Speaker at Water modeling on the multiphase fluid flow in a continuous casting mold
Enno Zinngrebe
- Speaker at Relationship between oxidic slivers defects on direct rolled Ca treated steel and deposits formed inside the SEN during casting