ESSC & DUPLEX 2019

Name: ESSC & DUPLEX 2019
Start: 2019-09-30T08:00:00+02:00
End: 2019-10-02T18:00:00+02:00
Location: Schloss Schönbrunn

30 September 2019 to 2 October 2019

Schloss Schönbrunn

Europe/Vienna timezone

<a href="https://asmet.org/event/essc-duplex-2019/" target="_blank">Registration is closed!

Support

Author List

Pasquini Aboli (QuinLogic GmbH)
- Co-author in DATA DRIVEN CONTINUOUS QUALITY MONITORING IN ROLLING MILLS
Azza Ahmed
- Co-author in HIGH NITROGEN HIGH CARBON STAINLESS STEEL
Deok-Chan Ahn
- Co-author in DEVELOPMENT OF HIGH FORMABLE FERRITIC STAINLESS STEEL FOR AUTOMOTIVE EXHAUST SYSTEM
Juan Francisco Almagro Bello (Acerinox Europa, SAU)
- Co-author in INFLUENCE OF THE ANNEALING TREATMENT ON THE TOUGHNESS OF DUPLEX STAINLESS STEEL TYPE EN-1.4462
Esperanza Andrés de la Fuente
- Co-author in INFLUENCE OF THE ANNEALING TREATMENT ON THE TOUGHNESS OF DUPLEX STAINLESS STEEL TYPE EN-1.4462
Frank Baerhold (ANDRITZ AG)
- Co-author in EFFLUENT FREE STAINLESS STEEL PICKLING
Martin Barna
- Co-author in SIMULATION OF ELECTROMAGNETIC STIRRING IN CONTINUOUS CASTING OF STAINLESS STEEL
Stephan Bauer
- Co-author in HYDROGEN UPTAKE OF DUPLEX 2205 AT H2 PARTIAL PRESSURES UP TO 100 BAR
Lakshya Bevli (Graz University of Technology)
- Author in CORROSION BEHAVIOUR OF SLM 316L FOR DIFFERENT BUILD DIRECTIONS AND SURFACE CONDITIONS
Jan Björk
- Co-author in INCLUSION OF FORTA FDX 27 (UNS S82031) INTO ASTM A1084
stefania bruschi
- Co-author in ELECTRICALLY ENHANCED PLASTIC DEFORMATION OF DUPLEX STAINLESS STEEL UNS S32750
Jaka Burja
- Author in FORMATION OF AUSTENITE DURING AGEING OF 17-4 PH PRECIPITATION HARDENING STAINLESS STEEL
- Co-author in INFLUENCE OF SIGMA PHASE PRECIPITATION IN THE 600 TO 750 °C RANGE ON MECHANICAL PROPERTIES OF SAF2205
Ricardo Buzolin (Graz University of Technology)
- Co-author in CORROSION BEHAVIOUR OF SLM 316L FOR DIFFERENT BUILD DIRECTIONS AND SURFACE CONDITIONS
Jose Wilmar Calderon-Hernandez
- Co-author in APPLICATIONS OF X-RAY DIFFRACTOMETRY ON PHASE QUANTIFICATION IN STAINLESS STEELS
irene calliari
- Co-author in COMPARISON BETWEEN AUTOGENOUS WELDING AND WITH ADDITION OF NICKEL ON Nd:YAG PULSED LASER WELDED UNS S32750 DUPLEX STAINLESS STEEL
- Co-author in ELECTRICALLY ENHANCED PLASTIC DEFORMATION OF DUPLEX STAINLESS STEEL UNS S32750
- Co-author in Nd-YAG LASER PULSED WELDING: EFFECTS ON THE SUPERDUPLEX STAINLESS STEEL UNS S32750
Daniella Caluscio dos Santos
- Author in RELATION BETWEEN PITTING POTENTIAL AND PREN VALUES FOR FERRITE AND AUSTENITE IN DUPLEX STAINLESS STEELS
Carola Celada-Casero
- Author in TAILORING THE MECHANICAL PROPERTIES THROUGH THE CONTROL OF HEAT TREATMENTS IN A PRECIPITATION HARDENING MESTABLE STAINLESS STEEL
Jesús Chao
- Co-author in TAILORING THE MECHANICAL PROPERTIES THROUGH THE CONTROL OF HEAT TREATMENTS IN A PRECIPITATION HARDENING MESTABLE STAINLESS STEEL
Giovani della Rosa Chbane
- Author in DICTRA® SIMULATIONS OF SIGMA PHASE FORMATION IN DUPLEX STAINLESS STEELS
Thomas Christiansen
- Author in NEW DEVELOPMENTS IN HIGH TEMPERATURE SOLUTION NITRIDING OF STAINLESS STEELS
- Co-author in HIGH AND LOW TEMPERATURE SURFACE HARDENING OF MARTENSITIC STAINLESS STEELS
- Co-author in INFLUENCE OF HEAT TREATMENT AND THERMOCHEMICAL SURFACE ENGINEERING ON THE HIERARCHICAL MICROSTRUCTURES OF 3D PRINTED AUSTENITIC STAINLESS STEEL
- Co-author in LOW TEMPERATURE SURFACE HARDENING OF STAINLESS STEEL; PREDICTING COMPOSITION AND STRESS PROFILES
- Co-author in THE EFFECT OF HEAT TREATMENT AND SURFACE HARDENING OF 3D PRINTED AUSTENITIC STAINLESS STEEL AlSl316 ON CORROSION AND WEAR PROPERTIES
Herrera Clara
- Author in DEVELOPMENT OF A NEW MARTENSITIC HIGH NITROGEN STAINLESS STEEL GRADE
Pilar Coca LLano
- Author in SCC BEHAVIOR OF SEVERAL AUSTENITIC STAINLESS STEELS IN PROTOTYPICAL SYNGAS CLEANING SYSTEM CONDITIONS
Julia Contreras Fortes
- Author in INFLUENCE OF THE ANNEALING TREATMENT ON THE TOUGHNESS OF DUPLEX STAINLESS STEEL TYPE EN-1.4462
Luis Coronado (ANDRITZ AG)
- Co-author in EFFLUENT FREE STAINLESS STEEL PICKLING
Eli Jorge da Cruz Junior
- Author in COMPARISON BETWEEN AUTOGENOUS WELDING AND WITH ADDITION OF NICKEL ON Nd:YAG PULSED LASER WELDED UNS S32750 DUPLEX STAINLESS STEEL
- Co-author in Nd-YAG LASER PULSED WELDING: EFFECTS ON THE SUPERDUPLEX STAINLESS STEEL UNS S32750
Kristian V. Dahl
- Co-author in NEW DEVELOPMENTS IN HIGH TEMPERATURE SOLUTION NITRIDING OF STAINLESS STEELS
Michael Davies
- Author in THE USE OF NICKEL-CONTAINING ALLOYS IN THE CHEMICAL INDUSTRY
Strhom Dennis
- Co-author in DEVELOPMENT OF A NEW MARTENSITIC HIGH NITROGEN STAINLESS STEEL GRADE
Dariusz Dyja
- Author in HOT CRACK TENDENCY IN THIN-WALLED HIGHLY ALLOYED AUSTENITIC STAINLESS STEEL
Mamdouh Eissa
- Co-author in HIGH NITROGEN HIGH CARBON STAINLESS STEEL
Hoda El-Faramawy
- Co-author in HIGH NITROGEN HIGH CARBON STAINLESS STEEL
Norbert Enzinger
- Co-author in TIME-TEMPERATURE-PRECIPITATION AND PROPERTY DIAGRAMS FOR THICK-WALLED DUPLEX STAINLESS STEEL
Sascha Eppensteiner
- Author in ADVANCED TECHNOLOGIES FOR CONTINUOUS BRIGHT ANNEALING OF STAINLESS STEEL STRIP PRODUCTS IN PURE HYDROGEN ATMOSPHERE
Helga Evers (QuinLogic GmbH)
- Author in DATA DRIVEN CONTINUOUS QUALITY MONITORING IN ROLLING MILLS
Xiuru Fan
- Co-author in SCIENCE AND TECHNOLOGY OF HIGH PERFORMANCE FERRITIC (HiperFer) STEELS
Sonja Felber
- Author in THE DUPLEX-STAINLESS-STEEL 1.4462 FOR FLOW LINES
Mariana Torteli M. Fiorante
- Author in THERMO-CALC® AND DICTRA® SIMULATIONS OF THE SOLUTION HEAT TREATMENT OF SUPERDUPLEX STAINLESS STEELS
Torsten Fischer
- Co-author in SCIENCE AND TECHNOLOGY OF HIGH PERFORMANCE FERRITIC (HiperFer) STEELS
Alexander Fleischanderl
- Co-author in ENERGY AND ENVIRONMENTAL SOLUTIONS FOR STAINLESS STEELMAKING: SUCCESSFUL PROJECTS & INNOVATIVE PRODUCTS
Rainer Fluch (voestalpine Bohler Edelstahl GmbH)
- Co-author in PASSIVITY OF STAINLESS STEELS - CHEMICAL COMPOSITION, ACTIVATION AND REPASSIVATION
michele forzan
- Co-author in ELECTRICALLY ENHANCED PLASTIC DEFORMATION OF DUPLEX STAINLESS STEEL UNS S32750
Fumio Fudanoki
- Co-author in DEVELOPMENT OF FERRITIC STAINLESS HOT-ROLLED STEEL SHEETS FOR EXHAUST PIPE FLANGE
Cecilie Vase Funch
- Author in INFLUENCE OF HEAT TREATMENT AND THERMOCHEMICAL SURFACE ENGINEERING ON THE HIERARCHICAL MICROSTRUCTURES OF 3D PRINTED AUSTENITIC STAINLESS STEEL
Daniel Fussek (ANDRITZ AG)
- Author in EFFLUENT FREE STAINLESS STEEL PICKLING
Claudio Gennari
- Author in ELECTRICALLY ENHANCED PLASTIC DEFORMATION OF DUPLEX STAINLESS STEEL UNS S32750
Claudio Gennari (University of Padova)
- Co-author in COMPARISON BETWEEN AUTOGENOUS WELDING AND WITH ADDITION OF NICKEL ON Nd:YAG PULSED LASER WELDED UNS S32750 DUPLEX STAINLESS STEEL
Saeed Ghali
- Author in HIGH NITROGEN HIGH CARBON STAINLESS STEEL
Renato Gobbo
- Co-author in ELECTRICALLY ENHANCED PLASTIC DEFORMATION OF DUPLEX STAINLESS STEEL UNS S32750
Dolores Gómez-Briceño
- Author in SCC BEHAVIOR OF SEVERAL AUSTENITIC STAINLESS STEELS IN PROTOTYPICAL SYNGAS CLEANING SYSTEM CONDITIONS
Hans Groth
- Co-author in DESIGN AGAINST BRITTLE FRACTURE IN DUPLEX STAINLESS STEEL CONSTRUCTIONS BY USING THE EN 1993-1-10 MODEL AND THE INFLUENCE OF PLATE THICKNESS ON THE IMPACT TOUGHNESS
Anthony Nicholas Grundy
- Co-author in COMPUTATIONAL THERMODYNAMICS AND KINETICS TOOLS FOR DEVELOPMENT OF ADVANCED STAINLESS STEELS
Paul Gümpel
- Co-author in APPLICATION OF HIGH STRENGTH DUPLEX STAINLESS STEEL WIRE FOR OFFSHORE FISH FARMING CAGES AND GEOLOGICAL PROTECTION SYSTEMS
Paul Gümpel
- Co-author in MAGNETIC EFFECTS ON AUSTENITIC STAINLESS STEELS AFTER A LOW TEMPERATURE CARBURIZATION
- Co-author in PITTING SUSCEPTIBILITY OF METASTABLE AUSTENITIC STAINLESS STEELS AS A FUNCTION OF SURFACE CONDITIONS
Jun-ichi Hamada
- Author in DEVELOPMENT OF FERRITIC STAINLESS HOT-ROLLED STEEL SHEETS FOR EXHAUST PIPE FLANGE
- Co-author in DEVELOPMENT OF AUSTENITIC STAINLESS STEEL SHEET WITH EXCELLENT HEAT RESISTANCE FO AUTOMOTIVE EXHAUST SYSTEM PARTS
Manfred Hausbauer (voestalpine BÖHLER Edelstahl GmbH & Co KG)
- Co-author in EARLY STAGES OF DELETERIOUS PHASES IN SUPER- AND HYPER DUPLEX STAINLESS STEEL AND THEIR EFFECT ON TOUGHNESS
Atsutaka Hayashi
- Co-author in DEVELOPMENT OF AUSTENITIC STAINLESS STEEL SHEET WITH EXCELLENT HEAT RESISTANCE FO AUTOMOTIVE EXHAUST SYSTEM PARTS
- Co-author in DEVELOPMENT OF FERRITIC STAINLESS HOT-ROLLED STEEL SHEETS FOR EXHAUST PIPE FLANGE
Björn Helmersson
- Co-author in INCLUSION OF FORTA FDX 27 (UNS S82031) INTO ASTM A1084
Nobuhiko Hiraide
- Co-author in DEVELOPMENT OF FERRITIC STAINLESS HOT-ROLLED STEEL SHEETS FOR EXHAUST PIPE FLANGE
Thomas Hofbauer (ANDRITZ AG)
- Co-author in EFFLUENT FREE STAINLESS STEEL PICKLING
Christian Höller (Graz University of Technology)
- Co-author in CORROSION BEHAVIOUR OF SLM 316L FOR DIFFERENT BUILD DIRECTIONS AND SURFACE CONDITIONS
S. Holzleitner (Montanuniversitaet Leoben)
- Co-author in PASSIVITY OF STAINLESS STEELS - CHEMICAL COMPOSITION, ACTIVATION AND REPASSIVATION
Paavo Hooli
- Author in MONITORING THE SURFACE QUALITY OF STAINLESS STEEL SLABS WITH REVEAL CAST - FINDINGS AND SUB-SEQUENT QUALITY IMPROVEMENTS
Arnulf Hörtnagl
- Author in PITTING SUSCEPTIBILITY OF METASTABLE AUSTENITIC STAINLESS STEELS AS A FUNCTION OF SURFACE CONDITIONS
- Co-author in APPLICATION OF HIGH STRENGTH DUPLEX STAINLESS STEEL WIRE FOR OFFSHORE FISH FARMING CAGES AND GEOLOGICAL PROTECTION SYSTEMS
Vahid Hosseini
- Author in PREDICTING FERRITE FRACTIONS IN SINGLE PASS SUPER DUPLEX STAINLESS STEEL WELDS - THERMAL CYCLE ANALYSIS AND PHASE TRANSFORMATION MODELING
- Co-author in TIME-TEMPERATURE-PRECIPITATION AND PROPERTY DIAGRAMS FOR THICK-WALLED DUPLEX STAINLESS STEEL
Kjell Hurtig
- Co-author in PREDICTING FERRITE FRACTIONS IN SINGLE PASS SUPER DUPLEX STAINLESS STEEL WELDS - THERMAL CYCLE ANALYSIS AND PHASE TRANSFORMATION MODELING
Aurélie Jacob
- Author in THERMOKINETIC SIMULATION OF σ PHASE IN DUPLEX STEELS
- Co-author in COMPUTATION OF COMPETITIVE PRECIPITATION OF ETA CARBONITRIDE PHASE, Z-PHASE NITRIDE, AND INTERMETALLIC G-PHASE AT VARYING NITROGEN CONTENTS IN Nb- AND Si-ALLOYED AUSTENITIC STAINLESS STEEL
Simon Jahn (Guenter Koehler Institute of Joining and Material Testing)
- Co-author in INFLUENCE OF THE PROCESS PARAMETERS ON THE TRANSFORMATION BEHAVIOR OF 2205 DURING LASER BEAM WELDING
Antti Järvenpää
- Author in AN OVERVIEW OF MECHANICAL PROPERTIES OF TODAY'S GRAIN-REFINED AUSTENITIC STAINLESS STEELS
Mirko Javurek
- Author in SIMULATION OF ELECTROMAGNETIC STIRRING IN CONTINUOUS CASTING OF STAINLESS STEEL
Bratberg Johan
- Co-author in COMPUTATIONAL THERMODYNAMICS AND KINETICS TOOLS FOR DEVELOPMENT OF ADVANCED STAINLESS STEELS
Jan Y Jonsson
- Co-author in DESIGN AGAINST BRITTLE FRACTURE IN DUPLEX STAINLESS STEEL CONSTRUCTIONS BY USING THE EN 1993-1-10 MODEL AND THE INFLUENCE OF PLATE THICKNESS ON THE IMPACT TOUGHNESS
- Co-author in INCLUSION OF FORTA FDX 27 (UNS S82031) INTO ASTM A1084
Il-Chan Jung
- Author in DEVELOPMENT OF HIGH FORMABLE FERRITIC STAINLESS STEEL FOR AUTOMOTIVE EXHAUST SYSTEM
Sven Jüttner
- Co-author in INFLUENCE OF THE ALLOY COMPOSITION OF FILLER METALS ON THE MICROSTRUCTURE OF WIRE AND ARC ADDITIVE MANUFACTURED COMPONENTS MADE OF DUPLEX STAINLESS STEEL
Damir Kahrimanović
- Co-author in UNDERSTANDING AND OPTIMIZING AOD PROCESS WITH CFD SIMULATIONS
Marianne Kapp
- Co-author in EARLY STAGES OF DELETERIOUS PHASES IN SUPER- AND HYPER DUPLEX STAINLESS STEEL AND THEIR EFFECT ON TOUGHNESS
- Co-author in HYDROGEN UPTAKE OF DUPLEX 2205 AT H2 PARTIAL PRESSURES UP TO 100 BAR
- Co-author in PASSIVITY OF STAINLESS STEELS - CHEMICAL COMPOSITION, ACTIVATION AND REPASSIVATION
Pentti Karjalainen
- Co-author in AN OVERVIEW OF MECHANICAL PROPERTIES OF TODAY'S GRAIN-REFINED AUSTENITIC STAINLESS STEELS
Leif Karlsson
- Co-author in PREDICTING FERRITE FRACTIONS IN SINGLE PASS SUPER DUPLEX STAINLESS STEEL WELDS - THERMAL CYCLE ANALYSIS AND PHASE TRANSFORMATION MODELING
Andreas Keplinger
- Author in EARLY STAGES OF DELETERIOUS PHASES IN SUPER- AND HYPER DUPLEX STAINLESS STEEL AND THEIR EFFECT ON TOUGHNESS
- Co-author in HYDROGEN UPTAKE OF DUPLEX 2205 AT H2 PARTIAL PRESSURES UP TO 100 BAR
Sun-Koo Kim
- Co-author in DEVELOPMENT OF HIGH FORMABLE FERRITIC STAINLESS STEEL FOR AUTOMOTIVE EXHAUST SYSTEM
Jin-Suk Kim
- Co-author in DEVELOPMENT OF HIGH FORMABLE FERRITIC STAINLESS STEEL FOR AUTOMOTIVE EXHAUST SYSTEM
Jongchul Kim
- Author in CONTROL OF SOLIDIFICATION STRUCTURE IN CONTINUOUS CASTING OF FERRITIC STAINLESS STEEL
- Co-author in DEVELOPMENT OF HIGH FORMABLE FERRITIC STAINLESS STEEL FOR AUTOMOTIVE EXHAUST SYSTEM
Fritz Kopin
- Author in MONOBLOCK 4.0: THE NEXT EVOLUTIONARY STEP IN THE STANDARD STAINLESS STEEL COLD ROLLING MARKET
Tadeja Kosec (Slovenian National Building & Civil Engineering Institute)
- Co-author in PASSIVITY OF STAINLESS STEELS - CHEMICAL COMPOSITION, ACTIVATION AND REPASSIVATION
Pawel Kucharczyk
- Co-author in DESIGN AGAINST BRITTLE FRACTURE IN DUPLEX STAINLESS STEEL CONSTRUCTIONS BY USING THE EN 1993-1-10 MODEL AND THE INFLUENCE OF PLATE THICKNESS ON THE IMPACT TOUGHNESS
Ömer Kücükyildiz
- Co-author in LOW TEMPERATURE SURFACE HARDENING OF STAINLESS STEEL; PREDICTING COMPOSITION AND STRESS PROFILES
Thomas Kühl
- Co-author in TREATMENT AND DISPOSAL OF Cr(Vl) CONTAMINATED STEEL PLANT WASTE PRODUCTS
Bernd Kuhn
- Author in SCIENCE AND TECHNOLOGY OF HIGH PERFORMANCE FERRITIC (HiperFer) STEELS
Mattia Lago (University of Padova)
- Co-author in Nd-YAG LASER PULSED WELDING: EFFECTS ON THE SUPERDUPLEX STAINLESS STEEL UNS S32750
Peter Langenberg
- Co-author in DESIGN AGAINST BRITTLE FRACTURE IN DUPLEX STAINLESS STEEL CONSTRUCTIONS BY USING THE EN 1993-1-10 MODEL AND THE INFLUENCE OF PLATE THICKNESS ON THE IMPACT TOUGHNESS
Jari Larkiola
- Co-author in AN APPROACH FOR PREDICTION OF COIL SPECIFIC FORMING LIMIT CURVES
Tatiane A. Lopes
- Co-author in APPLICATIONS OF X-RAY DIFFRACTOMETRY ON PHASE QUANTIFICATION IN STAINLESS STEELS
Jennifer Lopez Barrilao
- Co-author in SCIENCE AND TECHNOLOGY OF HIGH PERFORMANCE FERRITIC (HiperFer) STEELS
RODRIGO MAGNABOSCO
- Co-author in APPLICATIONS OF X-RAY DIFFRACTOMETRY ON PHASE QUANTIFICATION IN STAINLESS STEELS
- Co-author in DICTRA® SIMULATIONS OF SIGMA PHASE FORMATION IN DUPLEX STAINLESS STEELS
- Co-author in RELATION BETWEEN PITTING POTENTIAL AND PREN VALUES FOR FERRITE AND AUSTENITE IN DUPLEX STAINLESS STEELS
- Co-author in THERMO-CALC® AND DICTRA® SIMULATIONS OF THE SOLUTION HEAT TREATMENT OF SUPERDUPLEX STAINLESS STEELS
Timo Manninen
- Author in AN APPROACH FOR PREDICTION OF COIL SPECIFIC FORMING LIMIT CURVES
Andreas Markström
- Co-author in COMPUTATIONAL THERMODYNAMICS AND KINETICS TOOLS FOR DEVELOPMENT OF ADVANCED STAINLESS STEELS
Carlos Martinez (voestalpine BÖHLER Edelstahl GmbH & Co KG)
- Co-author in EARLY STAGES OF DELETERIOUS PHASES IN SUPER- AND HYPER DUPLEX STAINLESS STEEL AND THEIR EFFECT ON TOUGHNESS
Taha Mattar
- Co-author in HIGH NITROGEN HIGH CARBON STAINLESS STEEL
Isabella Mazza
- Author in REAL-TIME AND CONTACTLESS MOLD THERMAL MONITORING: IMPROVING METALLURGY, QUALITY AND PRODUCTIVITY OF BILLETS AND BLOOMS
Sebastian Meindl (Krehl & Partner)
- Co-author in MONOBLOCK 4.0: THE NEXT EVOLUTIONARY STEP IN THE STANDARD STAINLESS STEEL COLD ROLLING MARKET
Francisca Mendez Martin (Montanuniversitaet Leoben)
- Co-author in PASSIVITY OF STAINLESS STEELS - CHEMICAL COMPOSITION, ACTIVATION AND REPASSIVATION
Ulrich Meyn (MKN Technologies GmbH)
- Author in TREATMENT AND DISPOSAL OF Cr(Vl) CONTAMINATED STEEL PLANT WASTE PRODUCTS
Stefano Miani
- Co-author in REAL-TIME AND CONTACTLESS MOLD THERMAL MONITORING: IMPROVING METALLURGY, QUALITY AND PRODUCTIVITY OF BILLETS AND BLOOMS
Michael Misheraky
- Co-author in HIGH NITROGEN HIGH CARBON STAINLESS STEEL
Oleg V. Mishin (Technical University of Denmark)
- Co-author in INFLUENCE OF HEAT TREATMENT AND THERMOCHEMICAL SURFACE ENGINEERING ON THE HIERARCHICAL MICROSTRUCTURES OF 3D PRINTED AUSTENITIC STAINLESS STEEL
Franz Mittermayr
- Author in FLEXIBLE AOD OPTIMIZATION TECHNOLOGY FOR STAINLESS AND SPECIAL STEELMAKING
Markus Moll (SMR GmbH - Steel & Metals Market Research)
- Author in DUPLEX STAINLESS STEEL MARKETS IN 2019 ....... AND BEYOND
Isabelle Monfrinatti Macarrão
- Co-author in RELATION BETWEEN PITTING POTENTIAL AND PREN VALUES FOR FERRITE AND AUSTENITE IN DUPLEX STAINLESS STEELS
Gregor Mori
- Author in PASSIVITY OF STAINLESS STEELS - CHEMICAL COMPOSITION, ACTIVATION AND REPASSIVATION
- Co-author in HYDROGEN UPTAKE OF DUPLEX 2205 AT H2 PARTIAL PRESSURES UP TO 100 BAR
Emir Mujanovic (Slovenian National Building & Civil Engineering Institute)
- Co-author in PASSIVITY OF STAINLESS STEELS - CHEMICAL COMPOSITION, ACTIVATION AND REPASSIVATION
Patricia Munoz-Escalona
- Co-author in PREDICTION OF PERCENTAGE OF FERRITE AS A FUNCTION OF HEAT INPUT IN ROBOTIC GAS METAL ARC WELDING OF DUPLEX STAINLESS STEEL SAF 2205 WELDS
Aleš Nagode
- Co-author in FORMATION OF AUSTENITE DURING AGEING OF 17-4 PH PRECIPITATION HARDENING STAINLESS STEEL
Reza Naraghi
- Author in COMPUTATIONAL THERMODYNAMICS AND KINETICS TOOLS FOR DEVELOPMENT OF ADVANCED STAINLESS STEELS
Andrés Núñez Galindo
- Co-author in INFLUENCE OF THE ANNEALING TREATMENT ON THE TOUGHNESS OF DUPLEX STAINLESS STEEL TYPE EN-1.4462
Markus Oberndorfer
- Co-author in HYDROGEN UPTAKE OF DUPLEX 2205 AT H2 PARTIAL PRESSURES UP TO 100 BAR
James Oliver
- Author in INCLUSION OF FORTA FDX 27 (UNS S82031) INTO ASTM A1084
Claes OLSSON
- Author in PARAMETER EXTRACTION FROM DUPLEX STAINLESS STEEL MICROGRAPHS AND THEIR CORRELATION TO MACRO PROPERTIES
Mikko Palosaari
- Co-author in AN APPROACH FOR PREDICTION OF COIL SPECIFIC FORMING LIMIT CURVES
Krzysztof Pastucha
- Co-author in UNDERSTANDING AND OPTIMIZING AOD PROCESS WITH CFD SIMULATIONS
Maria Carolina Payares-Asprino
- Author in PREDICTION OF PERCENTAGE OF FERRITE AS A FUNCTION OF HEAT INPUT IN ROBOTIC GAS METAL ARC WELDING OF DUPLEX STAINLESS STEEL SAF 2205 WELDS
Francisco Javier Perosanz
- Author in SCC BEHAVIOR OF SEVERAL AUSTENITIC STAINLESS STEELS IN PROTOTYPICAL SYNGAS CLEANING SYSTEM CONDITIONS
Josefine Pfeiffer
- Co-author in HYDROGEN UPTAKE OF DUPLEX 2205 AT H2 PARTIAL PRESSURES UP TO 100 BAR
Johan Pilhagen
- Author in DESIGN AGAINST BRITTLE FRACTURE IN DUPLEX STAINLESS STEEL CONSTRUCTIONS BY USING THE EN 1993-1-10 MODEL AND THE INFLUENCE OF PLATE THICKNESS ON THE IMPACT TOUGHNESS
Erwin Povoden-Karadeniz
- Author in COMPUTATION OF COMPETITIVE PRECIPITATION OF ETA CARBONITRIDE PHASE, Z-PHASE NITRIDE, AND INTERMETALLIC G-PHASE AT VARYING NITROGEN CONTENTS IN Nb- AND Si-ALLOYED AUSTENITIC STAINLESS STEEL
- Co-author in THERMOKINETIC SIMULATION OF σ PHASE IN DUPLEX STEELS
Flavia R. Pucci
- Author in APPLICATIONS OF X-RAY DIFFRACTOMETRY ON PHASE QUANTIFICATION IN STAINLESS STEELS
Andrea Putz
- Author in TIME-TEMPERATURE-PRECIPITATION AND PROPERTY DIAGRAMS FOR THICK-WALLED DUPLEX STAINLESS STEEL
Thomas Reindl
- Co-author in FLEXIBLE AOD OPTIMIZATION TECHNOLOGY FOR STAINLESS AND SPECIAL STEELMAKING
Andrés Ruíz Flores
- Co-author in INFLUENCE OF THE ANNEALING TREATMENT ON THE TOUGHNESS OF DUPLEX STAINLESS STEEL TYPE EN-1.4462
Marek Rybarz
- Co-author in HOT CRACK TENDENCY IN THIN-WALLED HIGHLY ALLOYED AUSTENITIC STAINLESS STEEL
Rafael Sánchez Rodríguez (Acerinox Europa, SAU)
- Co-author in INFLUENCE OF THE ANNEALING TREATMENT ON THE TOUGHNESS OF DUPLEX STAINLESS STEEL TYPE EN-1.4462
David San-Martin
- Co-author in TAILORING THE MECHANICAL PROPERTIES THROUGH THE CONTROL OF HEAT TREATMENTS IN A PRECIPITATION HARDENING MESTABLE STAINLESS STEEL
Peter Schaaf
- Co-author in INFLUENCE OF THE PROCESS PARAMETERS ON THE TRANSFORMATION BEHAVIOR OF 2205 DURING LASER BEAM WELDING
Giovanni Schiavon
- Co-author in REAL-TIME AND CONTACTLESS MOLD THERMAL MONITORING: IMPROVING METALLURGY, QUALITY AND PRODUCTIVITY OF BILLETS AND BLOOMS
Philipp Schuler
- Author in MAGNETIC EFFECTS ON AUSTENITIC STAINLESS STEELS AFTER A LOW TEMPERATURE CARBURIZATION
- Co-author in PITTING SUSCEPTIBILITY OF METASTABLE AUSTENITIC STAINLESS STEELS AS A FUNCTION OF SURFACE CONDITIONS
Christian Schwingenschlögl
- Author in 3D ViSE - SIMULATION OF A COMPLETE PROCESSING LINES
Martin Selchert (Krehl & Partner)
- Co-author in MONOBLOCK 4.0: THE NEXT EVOLUTIONARY STEP IN THE STANDARD STAINLESS STEEL COLD ROLLING MARKET
Wolfgang Siegl
- Co-author in HYDROGEN UPTAKE OF DUPLEX 2205 AT H2 PARTIAL PRESSURES UP TO 100 BAR
Marcel Somers
- Author in LOW TEMPERATURE SURFACE HARDENING OF STAINLESS STEEL; PREDICTING COMPOSITION AND STRESS PROFILES
- Co-author in HIGH AND LOW TEMPERATURE SURFACE HARDENING OF MARTENSITIC STAINLESS STEELS
- Co-author in INFLUENCE OF HEAT TREATMENT AND THERMOCHEMICAL SURFACE ENGINEERING ON THE HIERARCHICAL MICROSTRUCTURES OF 3D PRINTED AUSTENITIC STAINLESS STEEL
- Co-author in NEW DEVELOPMENTS IN HIGH TEMPERATURE SOLUTION NITRIDING OF STAINLESS STEELS
- Co-author in THE EFFECT OF HEAT TREATMENT AND SURFACE HARDENING OF 3D PRINTED AUSTENITIC STAINLESS STEEL AlSl316 ON CORROSION AND WEAR PROPERTIES
Christof Sommitsch (Graz University of Technology)
- Co-author in CORROSION BEHAVIOUR OF SLM 316L FOR DIFFERENT BUILD DIRECTIONS AND SURFACE CONDITIONS
Matthias Sorg
- Author in APPLICATION OF HIGH STRENGTH DUPLEX STAINLESS STEEL WIRE FOR OFFSHORE FISH FARMING CAGES AND GEOLOGICAL PROTECTION SYSTEMS
- Co-author in PITTING SUSCEPTIBILITY OF METASTABLE AUSTENITIC STAINLESS STEELS AS A FUNCTION OF SURFACE CONDITIONS
Stefano Spagnul
- Co-author in REAL-TIME AND CONTACTLESS MOLD THERMAL MONITORING: IMPROVING METALLURGY, QUALITY AND PRODUCTIVITY OF BILLETS AND BLOOMS
Richard Stadlmayr
- Co-author in FLEXIBLE AOD OPTIMIZATION TECHNOLOGY FOR STAINLESS AND SPECIAL STEELMAKING
Thomas Steinparzer
- Author in ENERGY AND ENVIRONMENTAL SOLUTIONS FOR STAINLESS STEELMAKING: SUCCESSFUL PROJECTS & INNOVATIVE PRODUCTS
Michal Stopyra (Rybnik Engineering Center, Tenneco)
- Co-author in HOT CRACK TENDENCY IN THIN-WALLED HIGHLY ALLOYED AUSTENITIC STAINLESS STEEL
Natalie Stranghöner
- Co-author in DESIGN AGAINST BRITTLE FRACTURE IN DUPLEX STAINLESS STEEL CONSTRUCTIONS BY USING THE EN 1993-1-10 MODEL AND THE INFLUENCE OF PLATE THICKNESS ON THE IMPACT TOUGHNESS
Juliane Stützer
- Author in INFLUENCE OF THE ALLOY COMPOSITION OF FILLER METALS ON THE MICROSTRUCTURE OF WIRE AND ARC ADDITIVE MANUFACTURED COMPONENTS MADE OF DUPLEX STAINLESS STEEL
Blaž Šuler
- Co-author in FORMATION OF AUSTENITE DURING AGEING OF 17-4 PH PRECIPITATION HARDENING STAINLESS STEEL
Chikako Takushima
- Author in DEVELOPMENT OF AUSTENITIC STAINLESS STEEL SHEET WITH EXCELLENT HEAT RESISTANCE FO AUTOMOTIVE EXHAUST SYSTEM PARTS
Michal Talik
- Co-author in SCIENCE AND TECHNOLOGY OF HIGH PERFORMANCE FERRITIC (HiperFer) STEELS
Shin-ichi Teraoka
- Co-author in DEVELOPMENT OF AUSTENITIC STAINLESS STEEL SHEET WITH EXCELLENT HEAT RESISTANCE FO AUTOMOTIVE EXHAUST SYSTEM PARTS
Chiara Tibollo
- Author in HIGH AND LOW TEMPERATURE SURFACE HARDENING OF MARTENSITIC STAINLESS STEELS
Isaac Toda
- Co-author in TAILORING THE MECHANICAL PROPERTIES THROUGH THE CONTROL OF HEAT TREATMENTS IN A PRECIPITATION HARDENING MESTABLE STAINLESS STEEL
Tom Totzauer (Otto-von-Guericke-University Magdeburg)
- Co-author in INFLUENCE OF THE ALLOY COMPOSITION OF FILLER METALS ON THE MICROSTRUCTURE OF WIRE AND ARC ADDITIVE MANUFACTURED COMPONENTS MADE OF DUPLEX STAINLESS STEEL
Anton Trautmann
- Author in HYDROGEN UPTAKE OF DUPLEX 2205 AT H2 PARTIAL PRESSURES UP TO 100 BAR
Paul Trunner
- Co-author in ENERGY AND ENVIRONMENTAL SOLUTIONS FOR STAINLESS STEELMAKING: SUCCESSFUL PROJECTS & INNOVATIVE PRODUCTS
Mathias Truschner
- Co-author in HYDROGEN UPTAKE OF DUPLEX 2205 AT H2 PARTIAL PRESSURES UP TO 100 BAR
Stefan Ulrich
- Author in INFLUENCE OF THE PROCESS PARAMETERS ON THE TRANSFORMATION BEHAVIOR OF 2205 DURING LASER BEAM WELDING
Hiroshi Urashima
- Co-author in DEVELOPMENT OF FERRITIC STAINLESS HOT-ROLLED STEEL SHEETS FOR EXHAUST PIPE FLANGE
Esteban Urones-Garrote
- Co-author in TAILORING THE MECHANICAL PROPERTIES THROUGH THE CONTROL OF HEAT TREATMENTS IN A PRECIPITATION HARDENING MESTABLE STAINLESS STEEL
Emilie H. Valente
- Author in THE EFFECT OF HEAT TREATMENT AND SURFACE HARDENING OF 3D PRINTED AUSTENITIC STAINLESS STEEL AlSl316 ON CORROSION AND WEAR PROPERTIES
Rudolf Vallant
- Co-author in CORROSION BEHAVIOUR OF SLM 316L FOR DIFFERENT BUILD DIRECTIONS AND SURFACE CONDITIONS
Ana Vargas Velasco
- Co-author in INFLUENCE OF THE ANNEALING TREATMENT ON THE TOUGHNESS OF DUPLEX STAINLESS STEEL TYPE EN-1.4462
Vicente Afonso Ventrella
- Co-author in COMPARISON BETWEEN AUTOGENOUS WELDING AND WITH ADDITION OF NICKEL ON Nd:YAG PULSED LASER WELDED UNS S32750 DUPLEX STAINLESS STEEL
- Co-author in Nd-YAG LASER PULSED WELDING: EFFECTS ON THE SUPERDUPLEX STAINLESS STEEL UNS S32750
Arthur Moraes e Videira
- Author in Nd-YAG LASER PULSED WELDING: EFFECTS ON THE SUPERDUPLEX STAINLESS STEEL UNS S32750
- Co-author in COMPARISON BETWEEN AUTOGENOUS WELDING AND WITH ADDITION OF NICKEL ON Nd:YAG PULSED LASER WELDED UNS S32750 DUPLEX STAINLESS STEEL
Matteo Villa
- Co-author in HIGH AND LOW TEMPERATURE SURFACE HARDENING OF MARTENSITIC STAINLESS STEELS
- Co-author in NEW DEVELOPMENTS IN HIGH TEMPERATURE SOLUTION NITRIDING OF STAINLESS STEELS
Ravi Vishnu
- Co-author in DESIGN AGAINST BRITTLE FRACTURE IN DUPLEX STAINLESS STEEL CONSTRUCTIONS BY USING THE EN 1993-1-10 MODEL AND THE INFLUENCE OF PLATE THICKNESS ON THE IMPACT TOUGHNESS
Anna Visser (Montanuniversitaet Leoben)
- Co-author in PASSIVITY OF STAINLESS STEELS - CHEMICAL COMPOSITION, ACTIVATION AND REPASSIVATION
Bernhard Voraberger
- Co-author in UNDERSTANDING AND OPTIMIZING AOD PROCESS WITH CFD SIMULATIONS
Bernhard Voraberger (Primetals Technologies Austria GmbH)
- Co-author in ENERGY AND ENVIRONMENTAL SOLUTIONS FOR STAINLESS STEELMAKING: SUCCESSFUL PROJECTS & INNOVATIVE PRODUCTS
Corinna Wendeler
- Co-author in APPLICATION OF HIGH STRENGTH DUPLEX STAINLESS STEEL WIRE FOR OFFSHORE FISH FARMING CAGES AND GEOLOGICAL PROTECTION SYSTEMS
Sten Wessman
- Co-author in PREDICTING FERRITE FRACTIONS IN SINGLE PASS SUPER DUPLEX STAINLESS STEEL WELDS - THERMAL CYCLE ANALYSIS AND PHASE TRANSFORMATION MODELING
Sten Wessman
- Author in ON THE USE OF COMPUTATIONAL THERMODYNAMICS FOR PREDICTING THE PRECIPITATION AND GROWTH OF SECONDARY PHASES IN STAINLESS STEELS
Elin M. Westin
- Co-author in TIME-TEMPERATURE-PRECIPITATION AND PROPERTY DIAGRAMS FOR THICK-WALLED DUPLEX STAINLESS STEEL
Gerald Wimmer
- Co-author in UNDERSTANDING AND OPTIMIZING AOD PROCESS WITH CFD SIMULATIONS
Erich Wimmer
- Author in UNDERSTANDING AND OPTIMIZING AOD PROCESS WITH CFD SIMULATIONS
Peter Wimmer
- Co-author in SIMULATION OF ELECTROMAGNETIC STIRRING IN CONTINUOUS CASTING OF STAINLESS STEEL
Grethe Winther
- Co-author in LOW TEMPERATURE SURFACE HARDENING OF STAINLESS STEEL; PREDICTING COMPOSITION AND STRESS PROFILES
Benjamin Wittig (Otto-von-Guericke-University Magdeburg)
- Co-author in INFLUENCE OF THE ALLOY COMPOSITION OF FILLER METALS ON THE MICROSTRUCTURE OF WIRE AND ARC ADDITIVE MANUFACTURED COMPONENTS MADE OF DUPLEX STAINLESS STEEL
Atsuhisa Yakawa
- Co-author in DEVELOPMENT OF AUSTENITIC STAINLESS STEEL SHEET WITH EXCELLENT HEAT RESISTANCE FO AUTOMOTIVE EXHAUST SYSTEM PARTS
Jen-Ren Yang
- Co-author in TAILORING THE MECHANICAL PROPERTIES THROUGH THE CONTROL OF HEAT TREATMENTS IN A PRECIPITATION HARDENING MESTABLE STAINLESS STEEL
Bojan Zajec (Slovenian National Building & Civil Engineering Institute)
- Co-author in PASSIVITY OF STAINLESS STEELS - CHEMICAL COMPOSITION, ACTIVATION AND REPASSIVATION
Manuela Zinke
- Co-author in INFLUENCE OF THE ALLOY COMPOSITION OF FILLER METALS ON THE MICROSTRUCTURE OF WIRE AND ARC ADDITIVE MANUFACTURED COMPONENTS MADE OF DUPLEX STAINLESS STEEL
Borut Žužek
- Author in INFLUENCE OF SIGMA PHASE PRECIPITATION IN THE 600 TO 750 °C RANGE ON MECHANICAL PROPERTIES OF SAF2205