9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking - STEELSIM2021

Name: 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking - STEELSIM2021
Start: 2021-10-04T08:00:00+02:00
End: 2021-10-07T16:00:00+02:00
Location: Virtual Conference

5–7 Oct 2021 Virtual Conference

Virtual Conference

Europe/Vienna timezone

Conference Secretary

Author List

Mohsen Aghadavoudi Jolfaei
- Co-author in Steel strip hot runout table simulation and high temperature electromagnetic measurement for phase transformation monitoring
Björn Ahlin (KTH- Royal Institute of Technology)
- Author in Improving nitrogen control in AOD processes with the aid of computational fluid dynamics and thermodynamics databases.
Tuomas Alatarvas
- Author in Applicability of heat transfer and solidification simulations in investigating microstructural banding in continuously cast steel
- Co-author in Online 3D Heat Transfer and Solidification/Microstructure Models and their Capabilities for Simulation of Continuous Casting of Steel and Quality Prediction
Duarte Albuquerque (Instituto Superior Técnico)
- Co-author in Numerical investigation of steelmaking by-products recycling using microwave radiation
Mohammed Liaket Ali
- Author in Development of a kinetic mechanism for the direct reduction of hematite pellets in CO-H2 atmospheres using a porous solid pellet model
- Co-author in Development of a porous solid model for DRI applications
Katharina Amend
- Co-author in Real Time Modelling of Burden Components Distribution during Hopper Outflow and Burdening via a rotating Chute
Goran Andonovski
- Co-author in Digitalization and Software Support of the Electric Arc Furnace Process
Stephane Andrietti
- Co-author in Impact of radiative heat transfer on cooling of steel ingots during transport – a numerical analysis
Lorenzo Angelini (Feralpi Siderurgica)
- Author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Vitalis Anisiuba
- Author in Numerical Investigation of Air-Mist Spray in the Secondary Cooling during Continuous Casting of Steel
Niklas Apell
- Co-author in Recent modeling approaches to close-coupled atomization for powder production
Jari Asikainen (Ovako Imatra Oy, Finland)
- Author in Applicability of heat transfer and solidification simulations in investigating microstructural banding in continuously cast steel
Filippo Avellino (RINA)
- Author in Automatic unstructured quadrilateral mesh generator based on a direct method
Piotr Bala
- Co-author in Identification of the 3D cellular automata model of static recrystallization based on the inverse analysis
Bharath Bandi
- Author in Rapid alloy processing approach for ductility enhancement in commercial dual-phase steels through industrially relevant process and composition changes.
Sebastian Bangel
- Co-author in Probabilistic EAF charge mix optimization using machine learning based scrap characterization
Hadi Barati
- Author in Simulation of SEN clogging during continuous casting of Ti-ULC steel using a combined model
Martin Barna
- Co-author in Flow control in continuous slab casting by local electromagnetic braking
Vikram Bedekar
- Co-author in Unravelling the competing effects of chemical composition and grain size in affecting austenite stability in high carbon steels
Cameron Bee
- Author in Micro-segregation induced strain inhomogeneity in >900MPa UTS martensitic hot rolled advanced high strength steel
Vladimir Berenzon (PSI Metals GmbH)
- Co-author in Simulating the impact of complex rules’ configuration on quality control in steel manufacturing
Christian Bernhard
- Co-author in An integrated approach for near process modelling of the continuous casting of steel
- Co-author in Defect monitoring tool for CC strands
Michael Bernhard
- Co-author in An integrated approach for near process modelling of the continuous casting of steel
Massimiliano Bersani (Acciaierie di Calvisano)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Xavier Besseron
- Co-author in Analysis of a blast furnace behaviour through a resolving Euler-Lagrange approach
Liesbeth Beunder
- Co-author in Euler-Euler Multiphase Simulation for Optimization of Bottom Tuyere Configuration in a Combined-Blowing Worn Out Converter
Sai Pavan Bhogireddy
- Author in Prediction and optimization of the mechanical properties of Q&P Steel using process – property correlation via multiscale modelling
- Author in Role of cooling rate on microstructure evolution of Zn-Al-Mg based coatings via phase-field approach
Loris Bianco (Ferriere Nord)
- Author in Computational fluid modelling of plastics injections in EAF metallurgical operation through innovative nozzles and industrial testing
Jayasree Biswas
- Author in Study the effect of slag conductivity on liquid fe-c droplet decarburization kinetics
Bart Blanpian
- Co-author in A sub-particle model for inclusions at the gas/steel interface
Aljaž Blažič
- Author in Estimation of the bath temperature in an electric arc furnace using operational data and fuzzy modelling approach
J. Bohacek (Faculty of Mechanical Engineering, Brno)
- Author in A numerical study on the impact of a time-varying axial magnetic field on an industrial vacuum arc remelting (VAR) process
Ces Bos
- Co-author in The Introduction of a Boundary Intensity Factor to Cellular Automata Modelling to Improve Prediction of Recrystallisation in Hot Rolled Steel
Markus Bösenhofer
- Author in On the Role of Heat Transfer in the Thermo Chemical Conversion of Pulverized Coal
- Co-author in Species Diffusion Modeling in Porous Particles for Metallurgical Applications
Jaroslav Brhel (HTT)
- Author in Computational fluid modelling of plastics injections in EAF metallurgical operation through innovative nozzles and industrial testing
Christian Bruch
- Co-author in Model experiments in a liquid metal mockup focusing on the bubble dynamics in a steel ladle
Tobias Brune
- Co-author in Recent modeling approaches to close-coupled atomization for powder production
Daniel Buchberger
- Co-author in Hydrogen based direct iron ore reduction plant simulation
Birgit Bückner
- Co-author in Big data handling in process surveillance and quality control of secondary metallurgical processes
Heike Busch
- Co-author in Real Time Modelling of Burden Components Distribution during Hopper Outflow and Burdening via a rotating Chute
Serg Chanouian (KTH Royal Institute of Technology)
- Author in A fundamental investigation of decarburization reactions in the AOD converter using coupled CFD and thermodynamics databases.
Kinnor Chattopadhyay
- Co-author in Melting Kinetics of Metallic Particles in a Bottom Stirred Ladle during the Tapping Operation of Liquid Steel from the Furnace to the Ladle
Yuchao Chen
- Author in Numerical Modeling of Scrap Melting and Heat Transfer During Electrode Bore-In IN AC EAF
Matteo Chini (Ferriere Nord)
- Author in Computational fluid modelling of plastics injections in EAF metallurgical operation through innovative nozzles and industrial testing
Maximilain Christ
- Co-author in Probabilistic EAF charge mix optimization using machine learning based scrap characterization
Brugger Christian
- Co-author in Digital twin for continuous casters – Optimizing production with modeling and simulation methods
Biagio Cinquegrana (Feralpi Siderurgica)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Grzegorz Cios
- Co-author in Identification of the 3D cellular automata model of static recrystallization based on the inverse analysis
Filippo Cirilli (Rina Consulting - Centro Sviluppo Materiali SpA)
- Author in Computational fluid modelling of plastics injections in EAF metallurgical operation through innovative nozzles and industrial testing
Kenneth Coley
- Author in Modelling of steel-slag-inclusion reactions during refining of Si-Mn killed steel
- Co-author in Study the effect of slag conductivity on liquid fe-c droplet decarburization kinetics
Xavier Cornet
- Co-author in Prediction and optimization of the mechanical properties of Q&P Steel using process – property correlation via multiscale modelling
Frederic Costes
- Author in Impact of radiative heat transfer on cooling of steel ingots during transport – a numerical analysis
Jiří Cupek
- Co-author in Analysis of inclusions removal during steel flow in multi-strand tundish using numerical modelling
Edoardo D'Amanzo
- Co-author in Modelling in Continuous Casting in the frame of the VALCRA RFCS project
Fuchshuber Daniel
- Co-author in Digital twin for continuous casters – Optimizing production with modeling and simulation methods
Claire Davis
- Co-author in Effect of sample geometry on strain uniformity and double hit compression tests for recrystallisation kinetics determination
- Co-author in Micro-segregation induced strain inhomogeneity in >900MPa UTS martensitic hot rolled advanced high strength steel
- Co-author in Rapid alloy processing approach for ductility enhancement in commercial dual-phase steels through industrially relevant process and composition changes.
- Co-author in The Introduction of a Boundary Intensity Factor to Cellular Automata Modelling to Improve Prediction of Recrystallisation in Hot Rolled Steel
- Co-author in Using alloy design, modelling and rapid alloy processing validation to improve through-thickness microstructural uniformity during the production of large section components
Claire Davis
- Co-author in Steel strip hot runout table simulation and high temperature electromagnetic measurement for phase transformation monitoring
Bart de Graaff
- Co-author in Interpretation of the state of the blast furnance hearth by wear-model analysis
Michele De Santis (Rina Consulting - Centro Sviluppo Materiali SpA)
- Author in Computational fluid modelling of plastics injections in EAF metallurgical operation through innovative nozzles and industrial testing
Michele De Santis
- Co-author in Modelling in Continuous Casting in the frame of the VALCRA RFCS project
Vinod Dhiman
- Author in Euler-Euler Multiphase Simulation for Optimization of Bottom Tuyere Configuration in a Combined-Blowing Worn Out Converter
Cosmo Di Cecca (Feralpi Siderurgica)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Filippo Dionisi Vici
- Co-author in Ultrafine grained high C steel bars obtained by multi-pass warm caliber rolling
Tadej Dobravec
- Author in Development of adaptive meshless solution procedure for phase field modelling of dendritic solidification in carbon steel.
Tadej Dobravec
- Co-author in A temperature, concentration, stress and grain structure slice model for continuous casting of steel
Marianne Doletschek
- Author in Application of Liquid-Liquid Mass Transfer for a Steel Ladle
Hongbiao Dong
- Co-author in DEVELOPMENT OF A THICK STEEL PLATE MANUFACTURING ROUTE
- Co-author in Metallurgical Data Science for Steel Industry
- Co-author in On the modelling of channel segregation: from benchmark to steel ingots
- Co-author in Prediction of mechanical properties of hot rolled steel plates using neural network and statistical method
- Co-author in Search for Compositionally Complex Coating Materials for a Sustainable Steel Industry
Zihui Dong
- Author in Search for Compositionally Complex Coating Materials for a Sustainable Steel Industry
Zihui Dong
- Co-author in DEVELOPMENT OF A THICK STEEL PLATE MANUFACTURING ROUTE
- Co-author in Metallurgical Data Science for Steel Industry
Hongbiao Dong
- Co-author in Numerical modelling of thermal evolution and phase transformation during high-heat input electro-gas welding of marine steel
Andrew Dunsmore
- Co-author in DEVELOPMENT OF A THICK STEEL PLATE MANUFACTURING ROUTE
- Co-author in Metallurgical Data Science for Steel Industry
Vincenzo Duro (Acciaierie di Calvisano)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Sven Eckert
- Co-author in Control of liquid metal flow in a laboratory model of a continuous caster with Electromagnetic Brake and Contactless Inductive Flow Tomography
- Co-author in Experimental study of turbulent flow in a continuous casting mold under the influence of an EMBr at various positions
- Co-author in Model experiments in a liquid metal mockup focusing on the bubble dynamics in a steel ladle
Rupert Egger
- Co-author in Predicting the change in strength properties of heavy plates due to the levelling operation
Moritz Eickhoff
- Co-author in From Bubble-Scale to Full-Scale: Optimization of Numerical Modeling of the Ladle Furnace
- Co-author in Numerical Simulations of the Molten Metal Droplet Formation in the Electro-slag Remelting Process with a Rotating Electrode
Roland Eisl
- Author in Hydrogen based direct iron ore reduction plant simulation
Gabriel Ekoja
- Author in The Introduction of a Boundary Intensity Factor to Cellular Automata Modelling to Improve Prediction of Recrystallisation in Hot Rolled Steel
Mikael Ersson (KTH Royal institute of technology)
- Co-author in A fundamental investigation of decarburization reactions in the AOD converter using coupled CFD and thermodynamics databases.
Mikael Ersson (KTH- Royal Institute of Technology)
- Co-author in Improving nitrogen control in AOD processes with the aid of computational fluid dynamics and thermodynamics databases.
Ramona Eßbichl
- Co-author in Big data handling in process surveillance and quality control of secondary metallurgical processes
Timo Fabritius
- Co-author in Dynamic changes in slag properties during the reduction stage of the AOD process
- Co-author in Online 3D Heat Transfer and Solidification/Microstructure Models and their Capabilities for Simulation of Continuous Casting of Steel and Quality Prediction
Stefan Falkner
- Co-author in Predicting the change in strength properties of heavy plates due to the levelling operation
Francesco Fanicchia
- Co-author in Search for Compositionally Complex Coating Materials for a Sustainable Steel Industry
Didier Farrugia
- Co-author in Micro-segregation induced strain inhomogeneity in >900MPa UTS martensitic hot rolled advanced high strength steel
- Co-author in Rapid alloy processing approach for ductility enhancement in commercial dual-phase steels through industrially relevant process and composition changes.
Christoph Feilmayr
- Co-author in On the Role of Heat Transfer in the Thermo Chemical Conversion of Pulverized Coal
Wolfgang Fellner
- Co-author in Water model experiments on the influence of the phase distribution in the SEN considering varying operating conditions
Xiaoming Feng
- Co-author in Effect of bottom tuyere blockage on the mixing efficiency of molten bath in a converter
Michal Filipowicz
- Author in Bolt forging process optimisation using simulation software with applied Avrami model for recrystallisation
Gianpaolo Foglio (Feralpi Siderurgica)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Quentin Fradet
- Author in Development of a porous solid model for DRI applications
- Co-author in Development of a kinetic mechanism for the direct reduction of hematite pellets in CO-H2 atmospheres using a porous solid pellet model
Francesco Fredi (Feralpi Siderurgica)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Piero Frittella (Feralpi Siderurgica)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
JUN FU
- Author in Numerical modelling of thermal evolution and phase transformation during high-heat input electro-gas welding of marine steel
- Co-author in DEVELOPMENT OF A THICK STEEL PLATE MANUFACTURING ROUTE
- Co-author in Metallurgical Data Science for Steel Industry
Stefan Fuchshumer (voestalpine Stahl GmbH)
- Co-author in Temperature model for secondary metallurgical application
Maurizio Fusato (Feralpi Siderurgica)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Daniela Gaith
- Co-author in Predicting the change in strength properties of heavy plates due to the levelling operation
Gabriele Galeazzi (Visiorobotics)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Enrique Galindo-Nava
- Co-author in Unravelling the competing effects of chemical composition and grain size in affecting austenite stability in high carbon steels
Matthew Galler
- Co-author in From ladle to wire: Integration of calphad-based design and traditional through process modelling approaches
Pascal Gardin
- Co-author in Liquid-liquid mass transfer in steelmaking processes
- Co-author in Model experiments in a liquid metal mockup focusing on the bubble dynamics in a steel ladle
Daniele Gaspardo (Ferriere Nord)
- Author in Computational fluid modelling of plastics injections in EAF metallurgical operation through innovative nozzles and industrial testing
Jerzy Gawad
- Co-author in Prediction and optimization of the mechanical properties of Q&P Steel using process – property correlation via multiscale modelling
- Co-author in Role of cooling rate on microstructure evolution of Zn-Al-Mg based coatings via phase-field approach
Jean-Christophe Gebelin
- Author in DEVELOPMENT OF A THICK STEEL PLATE MANUFACTURING ROUTE
- Co-author in Metallurgical Data Science for Steel Industry
Ivan Glavinic
- Author in Control of liquid metal flow in a laboratory model of a continuous caster with Electromagnetic Brake and Contactless Inductive Flow Tomography
- Co-author in Experimental study of turbulent flow in a continuous casting mold under the influence of an EMBr at various positions
Joachim Gnauk (PSI Metals)
- Author in Simulating the impact of complex rules’ configuration on quality control in steel manufacturing
Arianna Gotti
- Author in Modelling in Continuous Casting in the frame of the VALCRA RFCS project
Matthew Green
- Co-author in Using alloy design, modelling and rapid alloy processing validation to improve through-thickness microstructural uniformity during the production of large section components
Georg Grimm (voestalpine Stahl GmbH)
- Co-author in Temperature model for secondary metallurgical application
Christine Gruber
- Author in Big data handling in process surveillance and quality control of secondary metallurgical processes
Anthony Nicholas Grundy
- Author in Digital Twin of Steelmaking and -refining Process by On-Line Thermodynamic and Kinetic Model
Huazhi Gu (Wuhan University of Science and Technology)
- Author in Numerical Simulation on Refractory Wear and Inclusion Formation in Continuous Casting Tundish
Rui Guan
- Author in Using a Multiphase Model to Study the Solidification Structure and Macrosegregation in Continuous Casting Process
Claudio Guarnaschelli
- Author in Ultrafine grained high C steel bars obtained by multi-pass warm caliber rolling
Francesco Guerra (Acciaierie di Calvisano)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Bruno Filipe Guimarães
- Co-author in Improving the slag-metal separation of a Blast Furnance Trough with the use of numerical simulations
Muxing Guo
- Co-author in A sub-particle model for inclusions at the gas/steel interface
Johanna Haapasalmi (Ovako Imatra Oy, Finland)
- Author in Applicability of heat transfer and solidification simulations in investigating microstructural banding in continuously cast steel
Tim Haas
- Author in From Bubble-Scale to Full-Scale: Optimization of Numerical Modeling of the Ladle Furnace
Gernot Hackl
- Co-author in Improving the slag-metal separation of a Blast Furnance Trough with the use of numerical simulations
- Co-author in Model experiments in a liquid metal mockup focusing on the bubble dynamics in a steel ladle
- Co-author in Modelling Asymmetric Flow in the Thin Slab Casting Mould under Electromagnetic Brake
- Co-author in Water model experiments on the influence of the phase distribution in the SEN considering varying operating conditions
Susanne Hahn
- Author in Defect monitoring tool for CC strands
Russell Hall
- Author in Steel strip hot runout table simulation and high temperature electromagnetic measurement for phase transformation monitoring
- Co-author in Using alloy design, modelling and rapid alloy processing validation to improve through-thickness microstructural uniformity during the production of large section components
Andreas Hammervold
- Co-author in Model predictive control of the AOD process for material and energy optimisation
Umut Hanoglu
- Author in Use of damage theory to improve material model and predict potential failures in a hot rolling simulation system
Michael Harasek
- Co-author in On the Role of Heat Transfer in the Thermo Chemical Conversion of Pulverized Coal
- Co-author in Species Diffusion Modeling in Porous Particles for Metallurgical Applications
Erwin Harbers
- Co-author in CFD modelling on impact of plug clogging in industrial scale steel ladles
Harald Harmuth
- Co-author in Application of Liquid-Liquid Mass Transfer for a Steel Ladle
Franz Hauzenberger
- Co-author in On the Role of Heat Transfer in the Thermo Chemical Conversion of Pulverized Coal
Zhu He (Wuhan University of Science and Technology)
- Author in Numerical Simulation on Refractory Wear and Inclusion Formation in Continuous Casting Tundish
Eetu-Pekka Heikkinen
- Co-author in Dynamic changes in slag properties during the reduction stage of the AOD process
Mikko Helle
- Author in Interpretation of the state of the blast furnance hearth by wear-model analysis
Philippe Hernaut
- Co-author in Prediction and optimization of the mechanical properties of Q&P Steel using process – property correlation via multiscale modelling
Steven Hill
- Co-author in Bolt forging process optimisation using simulation software with applied Avrami model for recrystallisation
Marlen Hochwimmer
- Co-author in Hydrogen based direct iron ore reduction plant simulation
Stephan Hojda
- Author in Real Time Modelling of Burden Components Distribution during Hopper Outflow and Burdening via a rotating Chute
Kai Huang (PSI Information Technology Co., Ltd.)
- Co-author in Simulating the impact of complex rules’ configuration on quality control in steel manufacturing
Ao Huang (Wuhan University of Science and Technology)
- Author in Numerical Simulation on Refractory Wear and Inclusion Formation in Continuous Casting Tundish
Tomáš Huczala
- Co-author in Analysis of inclusions removal during steel flow in multi-strand tundish using numerical modelling
ILARIA IACONETA
- Author in Prediction and optimization of the mechanical properties of Q&P Steel using process – property correlation via multiscale modelling
- Co-author in Role of cooling rate on microstructure evolution of Zn-Al-Mg based coatings via phase-field approach
Sergiu Ilie
- Co-author in An integrated approach for near process modelling of the continuous casting of steel
- Co-author in Defect monitoring tool for CC strands
- Co-author in Simulation of SEN clogging during continuous casting of Ti-ULC steel using a combined model
Olivier Jaouen
- Co-author in Impact of radiative heat transfer on cooling of steel ingots during transport – a numerical analysis
Matias Jaskari (University of Oulu, Finland)
- Author in Applicability of heat transfer and solidification simulations in investigating microstructural banding in continuously cast steel
Mirko Javurek
- Author in Continuous Casting Mold Flow with Gas Injection: Comparison of Physical and Mathematical Simulations
- Author in Continuous Casting Secondary Cooling: Realtime Simulation of Local Strand Temperatures
Klaus Jax (Primetals Technologies Austria GmbH)
- Co-author in AI models for mechanical properties prediction and their application in product development
Johan Jeppsson
- Co-author in Digital Twin of Steelmaking and -refining Process by On-Line Thermodynamic and Kinetic Model
Cheng Ji
- Co-author in Using a Multiphase Model to Study the Solidification Structure and Macrosegregation in Continuous Casting Process
Yu Jin (Tangshan Branch, Hebei Iron and Steel Co., Ltd.)
- Co-author in Thermodynamic Performance Optimization of CaO-SiO2-MgO-Al2O3 Slag System Based on Response Surface Methodology and Multiobjective Optimization
Nelson Joubert
- Author in Liquid-liquid mass transfer in steelmaking processes
Nico Kaden
- Co-author in Ultrafine grained high C steel bars obtained by multi-pass warm caliber rolling
Antti Kaijalainen (University of Oulu, Finland)
- Author in Applicability of heat transfer and solidification simulations in investigating microstructural banding in continuously cast steel
Thomas Kaltenbrunner
- Author in Predicting the change in strength properties of heavy plates due to the levelling operation
Rainer Kaltseis
- Co-author in Defect monitoring tool for CC strands
Marzuk Kamal (AeonX AI)
- Co-author in Search for Compositionally Complex Coating Materials for a Sustainable Steel Industry
Ebrahim Karimi Sibaki (Montanuniversitaet)
- Author in A numerical study on the impact of a time-varying axial magnetic field on an industrial vacuum arc remelting (VAR) process
Abdellah Kharicha
- Author in A numerical study on the impact of a time-varying axial magnetic field on an industrial vacuum arc remelting (VAR) process
- Co-author in Modeling of the as-cast structure and macrosegregation in the continuous casting of a steel billet: Effect of M-EMS
- Co-author in Modelling Asymmetric Flow in the Thin Slab Casting Mould under Electromagnetic Brake
- Co-author in Simulation of SEN clogging during continuous casting of Ti-ULC steel using a combined model
Christoph Kirmse
- Author in Probabilistic EAF charge mix optimization using machine learning based scrap characterization
Matthias Kiss
- Author in Species Diffusion Modeling in Porous Particles for Metallurgical Applications
Lina Kjellqvist
- Co-author in Digital Twin of Steelmaking and -refining Process by On-Line Thermodynamic and Kinetic Model
Sami Koskenniska (Ovako Imatra Oy, Finland)
- Author in Applicability of heat transfer and solidification simulations in investigating microstructural banding in continuously cast steel
Ernst Kozeschnik
- Co-author in From ladle to wire: Integration of calphad-based design and traditional through process modelling approaches
Johannes Kreyca
- Author in From ladle to wire: Integration of calphad-based design and traditional through process modelling approaches
- Co-author in Recrystallization simulation and double-hit compression tests of microalloyed steel
Konrad Krimpelstaetter
- Co-author in Digital Process and Product Twin for hot rolling
Roman Krobath
- Co-author in Defect monitoring tool for CC strands
Pentti Kupari
- Co-author in Model predictive control of the AOD process for material and energy optimisation
Gerhard Kurka
- Co-author in Simulation based Proof-of-Concept for Plant Transformation from Integrated BOF towards Hybrid BOF/EAF Production Route
Helmut Lachmund
- Co-author in Model experiments in a liquid metal mockup focusing on the bubble dynamics in a steel ladle
Luigi Langellotto (RINA SpA)
- Author in Automatic unstructured quadrilateral mesh generator based on a direct method
Paul Lansdell
- Co-author in Bolt forging process optimisation using simulation software with applied Avrami model for recrystallisation
Julian Laschinger
- Co-author in An integrated approach for near process modelling of the continuous casting of steel
Aleksi Laukka
- Co-author in Online 3D Heat Transfer and Solidification/Microstructure Models and their Capabilities for Simulation of Continuous Casting of Steel and Quality Prediction
Didier LAWRJANIEC
- Author in Impact of radiative heat transfer on cooling of steel ingots during transport – a numerical analysis
Reinhold Leitner
- Author in Digital twin for continuous casters – Optimizing production with modeling and simulation methods
Chenlei Leng
- Co-author in Prediction of mechanical properties of hot rolled steel plates using neural network and statistical method
Ming Li
- Co-author in DEVELOPMENT OF A THICK STEEL PLATE MANUFACTURING ROUTE
- Co-author in Metallurgical Data Science for Steel Industry
- Co-author in Numerical modelling of thermal evolution and phase transformation during high-heat input electro-gas welding of marine steel
Baokuan Li
- Co-author in Numerical Simulation of Solid Shell Distribution in a Funnel Shape Mold under Electromagnetic Braking and Strand Electromagnetic Stirring
JUN LI
- Author in On the modelling of channel segregation: from benchmark to steel ingots
Jianguo Li
- Co-author in On the modelling of channel segregation: from benchmark to steel ingots
Guangqiang Li (Wuhan University of Science and Technology)
- Author in Numerical Simulation on Refractory Wear and Inclusion Formation in Continuous Casting Tundish
Fucun Li
- Co-author in Metallurgical Data Science for Steel Industry
Michael Liebrecht
- Co-author in Predicting the change in strength properties of heavy plates due to the levelling operation
Rongshan Lin
- Co-author in Real Time Modelling of Burden Components Distribution during Hopper Outflow and Burdening via a rotating Chute
Wenhui Lin
- Co-author in Effect of bottom tuyere blockage on the mixing efficiency of molten bath in a converter
Qing Liu
- Co-author in Effect of bottom tuyere blockage on the mixing efficiency of molten bath in a converter
- Co-author in Thermodynamic Performance Optimization of CaO-SiO2-MgO-Al2O3 Slag System Based on Response Surface Methodology and Multiobjective Optimization
Zhongqiu Liu
- Co-author in Numerical Simulation of Solid Shell Distribution in a Funnel Shape Mold under Electromagnetic Braking and Strand Electromagnetic Stirring
Vito Lotar
- Author in Digitalization and Software Support of the Electric Arc Furnace Process
- Co-author in Estimation of the bath temperature in an electric arc furnace using operational data and fuzzy modelling approach
Wentao Lou
- Author in Study of Bubble Breakup and Coalescence in Gas-Stirred Ladle Refining Process
Seppo Louhenkilpi
- Author in Online 3D Heat Transfer and Solidification/Microstructure Models and their Capabilities for Simulation of Continuous Casting of Steel and Quality Prediction
Andreas Ludwig
- Author in A numerical study on the impact of a time-varying axial magnetic field on an industrial vacuum arc remelting (VAR) process
- Co-author in Modeling of the as-cast structure and macrosegregation in the continuous casting of a steel billet: Effect of M-EMS
- Co-author in Simulation of SEN clogging during continuous casting of Ti-ULC steel using a combined model
Andreas Ludwig
- Co-author in Modelling Asymmetric Flow in the Thin Slab Casting Mould under Electromagnetic Brake
Hans Bodo Lüngen
- Co-author in Model experiments in a liquid metal mockup focusing on the bubble dynamics in a steel ladle
SEN LUO
- Co-author in Influence Mechanisms of Processing Parameters on Solidification Structure of Continuously Cast Steel
- Co-author in Numerical Simulation of Free Grain Sedimentation in Continuously Cast Billet
Haibo Ma
- Co-author in Numerical Investigation of Air-Mist Spray in the Secondary Cooling during Continuous Casting of Steel
Jacob Maarek
- Co-author in Liquid-liquid mass transfer in steelmaking processes
Lukasz Madej
- Co-author in Identification of the 3D cellular automata model of static recrystallization based on the inverse analysis
Annelies Malfliet
- Co-author in A sub-particle model for inclusions at the gas/steel interface
Silvia Mancini (RINA SpA)
- Author in Automatic unstructured quadrilateral mesh generator based on a direct method
Carlo Mapelli (Politecnico di Milano)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Sofia Maurina (Visiorobotics)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Boštjan Mavrič
- Co-author in A temperature, concentration, stress and grain structure slice model for continuous casting of steel
Boštjan Mavrič
- Co-author in Development of adaptive meshless solution procedure for phase field modelling of dendritic solidification in carbon steel.
Dipak Mazumdar
- Co-author in Ensuring better inert gas shielding of ladle shroud-collector nozzle (LS-CN) assembly: A new gas delivery design and industrial scale assessment
Chen Meng
- Co-author in Influence Mechanisms of Processing Parameters on Solidification Structure of Continuously Cast Steel
Karel Michalek
- Co-author in Analysis of inclusions removal during steel flow in multi-strand tundish using numerical modelling
Susanne Michelic
- Co-author in Simulation of SEN clogging during continuous casting of Ti-ULC steel using a combined model
Jyrki Miettinen
- Co-author in Online 3D Heat Transfer and Solidification/Microstructure Models and their Capabilities for Simulation of Continuous Casting of Steel and Quality Prediction
Giuseppe Miglietta (Acciaierie di Calvisano)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Ersson Mikael (KTH)
- Author in Experimental and numerical study of the open eye in the uphill teeming ingot casting process
Alessandro Milan (Feralpi Siderurgica)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Kaamil Ur Rahman Mohamed Shibly
- Author in Modelling the Effects of Different Degrees of NMI Adhesion on Particle Deposition Behaviour in a Nozzle
Mateusz Mojzeszko
- Co-author in Identification of the 3D cellular automata model of static recrystallization based on the inverse analysis
Debanga Mondal
- Author in CFD-DEM simulation of dynamics of the upper part of the blast furnance
Rodolfo Morales
- Author in The Physical Chemistry of Steel Deoxidation and Nozzle Clogging in Continuous Casting
Rodolfo Morales
- Author in Melting Kinetics of Metallic Particles in a Bottom Stirred Ladle during the Tapping Operation of Liquid Steel from the Furnace to the Ladle
Fabio Morandini (Feralpi Siderurgica)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Maksim Moschenko
- Co-author in Prediction and optimization of the mechanical properties of Q&P Steel using process – property correlation via multiscale modelling
Katarina Mramor
- Author in Large eddy simulation of continuous casting process
Stefan Mühlböck
- Author in Simulation based Proof-of-Concept for Plant Transformation from Integrated BOF towards Hybrid BOF/EAF Production Route
Suvam Mukherjee
- Author in Ensuring better inert gas shielding of ladle shroud-collector nozzle (LS-CN) assembly: A new gas delivery design and industrial scale assessment
Carlos Muniz
- Co-author in Melting Kinetics of Metallic Particles in a Bottom Stirred Ladle during the Tapping Operation of Liquid Steel from the Furnace to the Ladle
- Co-author in The Physical Chemistry of Steel Deoxidation and Nozzle Clogging in Continuous Casting
Bahareh Najafian Ashrafi
- Author in Flow control in continuous slab casting by local electromagnetic braking
Alfonso Najer-Bastida
- Co-author in Melting Kinetics of Metallic Particles in a Bottom Stirred Ladle during the Tapping Operation of Liquid Steel from the Furnace to the Ladle
- Co-author in The Physical Chemistry of Steel Deoxidation and Nozzle Clogging in Continuous Casting
Stephan Natschläger (voestalpine Stahl GmbH)
- Co-author in Temperature model for secondary metallurgical application
Bogdan Nenchev
- Author in Metallurgical Data Science for Steel Industry
- Co-author in DEVELOPMENT OF A THICK STEEL PLATE MANUFACTURING ROUTE
- Co-author in Numerical modelling of thermal evolution and phase transformation during high-heat input electro-gas welding of marine steel
Du Ngyuen Duy (Primetals Technologies)
- Co-author in AI models for mechanical properties prediction and their application in product development
Johannes Niel
- Author in A new sinter plant model for flowsheet simulations
- Co-author in Optimization of integrated steel plants operation using the m.simtop strategic planning platform
Samuel Nielson
- Co-author in Development of a Prediction Simulator Software for Blast Furnace Operation
Gerald Nitzl
- Co-author in Modelling Asymmetric Flow in the Thin Slab Casting Mould under Electromagnetic Brake
Julius Norrena
- Co-author in Online 3D Heat Transfer and Solidification/Microstructure Models and their Capabilities for Simulation of Continuous Casting of Steel and Quality Prediction
Hans-Jürgen Odenthal
- Author in Recent modeling approaches to close-coupled atomization for powder production
- Co-author in Model experiments in a liquid metal mockup focusing on the bubble dynamics in a steel ladle
Peter Oertelt
- Co-author in Simulation based Proof-of-Concept for Plant Transformation from Integrated BOF towards Hybrid BOF/EAF Production Route
Tyamo Okosun
- Author in Development of a Prediction Simulator Software for Blast Furnace Operation
Clemens Oppeneiger
- Co-author in Hydrogen based direct iron ore reduction plant simulation
Chinnapat Panwiswas
- Co-author in DEVELOPMENT OF A THICK STEEL PLATE MANUFACTURING ROUTE
- Co-author in Metallurgical Data Science for Steel Industry
- Co-author in Numerical modelling of thermal evolution and phase transformation during high-heat input electro-gas welding of marine steel
Francesco Papini
- Co-author in Ultrafine grained high C steel bars obtained by multi-pass warm caliber rolling
Jönsson Pär (KTH)
- Author in Experimental and numerical study of the open eye in the uphill teeming ingot casting process
Erik Parteder
- Co-author in Predicting the change in strength properties of heavy plates due to the levelling operation
Pennerstorfer Paul
- Co-author in Digital twin for continuous casters – Optimizing production with modeling and simulation methods
Shiladitya Paul
- Co-author in Search for Compositionally Complex Coating Materials for a Sustainable Steel Industry
Vera Peiss
- Co-author in Model predictive control of the AOD process for material and energy optimisation
José Pereira (Instituto Superior Técnico)
- Co-author in Numerical investigation of steelmaking by-products recycling using microwave radiation
Bernhard Peters
- Author in Analysis of a blast furnace behaviour through a resolving Euler-Lagrange approach
Herbert Pfeifer
- Co-author in From Bubble-Scale to Full-Scale: Optimization of Numerical Modeling of the Ladle Furnace
- Co-author in Numerical Simulations of the Molten Metal Droplet Formation in the Electro-slag Remelting Process with a Rotating Electrode
Andre Phillion (McMaster Steel Research Center, Department of Materials Science and Engineering, McMaster University, Hamilton, Ontario, Canada, ON L8S 4L7)
- Author in Modelling of steel-slag-inclusion reactions during refining of Si-Mn killed steel
- Co-author in Modelling the Effects of Different Degrees of NMI Adhesion on Particle Deposition Behaviour in a Nozzle
Eveliina Piipponen
- Co-author in Online 3D Heat Transfer and Solidification/Microstructure Models and their Capabilities for Simulation of Continuous Casting of Steel and Quality Prediction
Stefan Pirker
- Author in From real-time CFD simulations towards flow-based digital shadows of metallurgical processes
- Co-author in Analysis of the hysteresis behavior in regime transition of co-current liquid-gas flow using computational fluid dynamics
- Co-author in On the removal of a spherical Al2O3 inclusion at the steel-slag interface: A numerical study
Angshuman Podder (PhD student, Materials Science Engineering, McMaster University)
- Author in Modelling of steel-slag-inclusion reactions during refining of Si-Mn killed steel
Martin Pollet
- Co-author in Real Time Modelling of Burden Components Distribution during Hopper Outflow and Burdening via a rotating Chute
Stéphane Popinet
- Co-author in Liquid-liquid mass transfer in steelmaking processes
Erwin Povoden-Karadeniz
- Co-author in Multiscale homogenization of elastic properties in hypereutectoid steel
- Co-author in Recrystallization simulation and double-hit compression tests of microalloyed steel
Ulrich Prahl
- Co-author in Ultrafine grained high C steel bars obtained by multi-pass warm caliber rolling
Peter Presoly
- Co-author in Defect monitoring tool for CC strands
Lukas Preuler
- Co-author in An integrated approach for near process modelling of the continuous casting of steel
Stefan Puttinger
- Co-author in From real-time CFD simulations towards flow-based digital shadows of metallurgical processes
Zilong Qiu
- Author in A sub-particle model for inclusions at the gas/steel interface
Vanessa Quaranta
- Author in Prediction and optimization of the mechanical properties of Q&P Steel using process – property correlation via multiscale modelling
- Author in Role of cooling rate on microstructure evolution of Zn-Al-Mg based coatings via phase-field approach
Pavel Ramirez Lopez
- Author in Modeling Contact and Friction at the Mold-strand Gap through Lubrication and Contact Indexes
- Author in Modelling in Continuous Casting in the frame of the VALCRA RFCS project
Andreas Rath
- Author in Implementation of a surface-to-surface model for implicitly solved multiple one-dimensional simulations
Harald Raupenstrauch
- Co-author in Implementation of a surface-to-surface model for implicitly solved multiple one-dimensional simulations
Nabi Allah Razani
- Author in Flow stress modelling considering dislocation density and recrystallization kinetics during hot deformation of API X70 pipeline steel
Neng Ren
- Co-author in On the modelling of channel segregation: from benchmark to steel ingots
Alexandre Dolabella Resende
- Co-author in Improving the slag-metal separation of a Blast Furnance Trough with the use of numerical simulations
Davide Ressegotti (Rina Centro Sviluppo Materiali)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Ralf Rettig
- Co-author in Digital Twin of Steelmaking and -refining Process by On-Line Thermodynamic and Kinetic Model
Nick Rheinheimer
- Co-author in Development of a Prediction Simulator Software for Blast Furnace Operation
Rodrigo Garcia Ribeiro
- Author in Improving the slag-metal separation of a Blast Furnance Trough with the use of numerical simulations
Aloisio Simões RIBEIRO
- Co-author in Improving the slag-metal separation of a Blast Furnance Trough with the use of numerical simulations
Uwe Riedel
- Co-author in Development of a kinetic mechanism for the direct reduction of hematite pellets in CO-H2 atmospheres using a porous solid pellet model
- Co-author in Development of a porous solid model for DRI applications
Axel Rimnac
- Co-author in Digital Process and Product Twin for hot rolling
Jafeth Rodriguez
- Co-author in Melting Kinetics of Metallic Particles in a Bottom Stirred Ladle during the Tapping Operation of Liquid Steel from the Furnace to the Ladle
- Co-author in The Physical Chemistry of Steel Deoxidation and Nozzle Clogging in Continuous Casting
Ilia Roisman
- Co-author in Recent modeling approaches to close-coupled atomization for powder production
Roman Rössler
- Author in Temperature model for secondary metallurgical application
- Co-author in From real-time CFD simulations towards flow-based digital shadows of metallurgical processes
Roman Rössler
- Co-author in Big data handling in process surveillance and quality control of secondary metallurgical processes
Alban Rousset
- Co-author in Analysis of a blast furnace behaviour through a resolving Euler-Lagrange approach
Frank Rückert
- Co-author in Real Time Modelling of Burden Components Distribution during Hopper Outflow and Burdening via a rotating Chute
Henrik Rusche
- Co-author in Analysis of a blast furnace behaviour through a resolving Euler-Lagrange approach
Steve Ryan
- Co-author in Numerical Modeling of Scrap Melting and Heat Transfer During Electrode Bore-In IN AC EAF
Lukasz Rychłowski
- Co-author in Identification of the 3D cellular automata model of static recrystallization based on the inverse analysis
Mahdi Saeedipour
- Author in Analysis of the hysteresis behavior in regime transition of co-current liquid-gas flow using computational fluid dynamics
- Co-author in On the removal of a spherical Al2O3 inclusion at the steel-slag interface: A numerical study
Ilaria Salvatori
- Co-author in Ultrafine grained high C steel bars obtained by multi-pass warm caliber rolling
Gabriel Santos
- Author in An integrated approach for near process modelling of the continuous casting of steel
Denis Saraev
- Co-author in Prediction and optimization of the mechanical properties of Q&P Steel using process – property correlation via multiscale modelling
- Co-author in Role of cooling rate on microstructure evolution of Zn-Al-Mg based coatings via phase-field approach
Bozidar Sarler
- Co-author in Use of damage theory to improve material model and predict potential failures in a hot rolling simulation system
Božidar Šarler
- Author in A temperature, concentration, stress and grain structure slice model for continuous casting of steel
- Co-author in Development of adaptive meshless solution procedure for phase field modelling of dendritic solidification in carbon steel.
- Co-author in Large eddy simulation of continuous casting process
Henrik Saxén
- Co-author in CFD-DEM simulation of dynamics of the upper part of the blast furnance
- Co-author in Interpretation of the state of the blast furnance hearth by wear-model analysis
Magdalena Schatzl
- Co-author in Big data handling in process surveillance and quality control of secondary metallurgical processes
Magdalena Schatzl
- Co-author in On the Role of Heat Transfer in the Thermo Chemical Conversion of Pulverized Coal
- Co-author in Species Diffusion Modeling in Porous Particles for Metallurgical Applications
Martin Schlautmann
- Co-author in Model predictive control of the AOD process for material and energy optimisation
Alexander Schlemminger (QuantoLux GmbH)
- Author in How laser OES real time analysis enables the in-situ integration of slag analysis into simulation models
Matthias Schmidtchen
- Co-author in Ultrafine grained high C steel bars obtained by multi-pass warm caliber rolling
Christian Schubert
- Author in Numerical Simulations of the Molten Metal Droplet Formation in the Electro-slag Remelting Process with a Rotating Electrode
- Co-author in From Bubble-Scale to Full-Scale: Optimization of Numerical Modeling of the Ladle Furnace
Dennis Schurmann
- Author in Experimental study of turbulent flow in a continuous casting mold under the influence of an EMBr at various positions
Alois Seilinger
- Co-author in Digital Process and Product Twin for hot rolling
Christian Senes (Acciaierie di Calvisano)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Alfred Seyr (Primetals Technologies)
- Co-author in AI models for mechanical properties prediction and their application in product development
Hannes Seyrkammer (voestalpine Stahl GmbH)
- Co-author in Temperature model for secondary metallurgical application
Jenny Shepherd
- Co-author in Prediction of mechanical properties of hot rolled steel plates using neural network and statistical method
Armin Silaen
- Co-author in Numerical Investigation of Air-Mist Spray in the Secondary Cooling during Continuous Casting of Steel
- Co-author in Numerical Modeling of Scrap Melting and Heat Transfer During Electrode Bore-In IN AC EAF
Luís Silva
- Author in Numerical investigation of steelmaking by-products recycling using microwave radiation
Mateusz Sitko
- Author in Identification of the 3D cellular automata model of static recrystallization based on the inverse analysis
Jakob Six
- Co-author in Defect monitoring tool for CC strands
Igor Škrjanc
- Co-author in Digitalization and Software Support of the Electric Arc Furnace Process
- Co-author in Estimation of the bath temperature in an electric arc furnace using operational data and fuzzy modelling approach
Carl Slater
- Author in Using alloy design, modelling and rapid alloy processing validation to improve through-thickness microstructural uniformity during the production of large section components
- Co-author in Bolt forging process optimisation using simulation software with applied Avrami model for recrystallisation
- Co-author in Effect of sample geometry on strain uniformity and double hit compression tests for recrystallisation kinetics determination
- Co-author in Rapid alloy processing approach for ductility enhancement in commercial dual-phase steels through industrially relevant process and composition changes.
- Co-author in The Introduction of a Boundary Intensity Factor to Cellular Automata Modelling to Improve Prediction of Recrystallisation in Hot Rolled Steel
Carl Slater
- Co-author in Micro-segregation induced strain inhomogeneity in >900MPa UTS martensitic hot rolled advanced high strength steel
Evelyn Sobotka
- Author in Recrystallization simulation and double-hit compression tests of microalloyed steel
Christoph Spijker
- Co-author in Implementation of a surface-to-surface model for implicitly solved multiple one-dimensional simulations
Georg Stechauner
- Co-author in Defect monitoring tool for CC strands
Frank Stefani
- Co-author in Control of liquid metal flow in a laboratory model of a continuous caster with Electromagnetic Brake and Contactless Inductive Flow Tomography
Stefan Stein
- Co-author in Prediction of mechanical properties of hot rolled steel plates using neural network and statistical method
Alessandro Stenico (PSI Metals GmbH)
- Co-author in Simulating the impact of complex rules’ configuration on quality control in steel manufacturing
Hugo Stocker
- Co-author in On the Role of Heat Transfer in the Thermo Chemical Conversion of Pulverized Coal
Sonja Straßer (Primetals Technologies)
- Author in AI models for mechanical properties prediction and their application in product development
Kumar Subramanian
- Author in CFD modelling on impact of plug clogging in industrial scale steel ladles
Jiankun sun
- Author in Effect of bottom tuyere blockage on the mixing efficiency of molten bath in a converter
Matthias Taferner
- Co-author in An integrated approach for near process modelling of the continuous casting of steel
Nusrat Tamanna
- Author in Effect of sample geometry on strain uniformity and double hit compression tests for recrystallisation kinetics determination
Chong Tan (Wuhan University of Science and Technology)
- Author in Numerical Simulation on Refractory Wear and Inclusion Formation in Continuous Casting Tundish
Yong Tang
- Author in Thin slab casting nozzle geomery design study with the aid of numerical and water modelling
- Co-author in Modelling Asymmetric Flow in the Thin Slab Casting Mould under Electromagnetic Brake
Biao Tao
- Co-author in DEVELOPMENT OF A THICK STEEL PLATE MANUFACTURING ROUTE
- Co-author in Metallurgical Data Science for Steel Industry
- Co-author in Numerical modelling of thermal evolution and phase transformation during high-heat input electro-gas welding of marine steel
Qing Tao
- Co-author in DEVELOPMENT OF A THICK STEEL PLATE MANUFACTURING ROUTE
- Co-author in Metallurgical Data Science for Steel Industry
- Co-author in Numerical modelling of thermal evolution and phase transformation during high-heat input electro-gas welding of marine steel
- Co-author in Prediction of mechanical properties of hot rolled steel plates using neural network and statistical method
Mattia Tellaroli (Feralpi Siderurgica)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
maria thumfart
- Author in Water model experiments on the influence of the phase distribution in the SEN considering varying operating conditions
Maria Thumfart
- Co-author in Big data handling in process surveillance and quality control of secondary metallurgical processes
Anders Tilliander (KTH Royal Institute of Technology)
- Co-author in A fundamental investigation of decarburization reactions in the AOD converter using coupled CFD and thermodynamics databases.
Anders Tilliander (KTH- Royal Institute of Technology)
- Co-author in Improving nitrogen control in AOD processes with the aid of computational fluid dynamics and thermodynamics databases.
Klaus Timmel
- Co-author in Experimental study of turbulent flow in a continuous casting mold under the influence of an EMBr at various positions
- Co-author in Model experiments in a liquid metal mockup focusing on the bubble dynamics in a steel ladle
Stefan Tjaden
- Co-author in Optimization of integrated steel plants operation using the m.simtop strategic planning platform
Markéta Tkadlečková
- Author in Analysis of inclusions removal during steel flow in multi-strand tundish using numerical modelling
Simon Tomažič
- Co-author in Digitalization and Software Support of the Electric Arc Furnace Process
Victor Trejo
- Author in Impact of radiative heat transfer on cooling of steel ingots during transport – a numerical analysis
Cameron Tropea
- Co-author in Recent modeling approaches to close-coupled atomization for powder production
Ganna Tsymokh (Feralpi Siderurgica)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Stephen Tullis (Dept. of Mechanical Engineering, McMaster University, Hamilton, ON)
- Co-author in Modelling the Effects of Different Degrees of NMI Adhesion on Particle Deposition Behaviour in a Nozzle
Alexander Vakhrushev
- Author in Modelling Asymmetric Flow in the Thin Slab Casting Mould under Electromagnetic Brake
Alexander Vakhrushev (CD-Lab for Metallurgical Applications of MHD, University of Leoben, A-8700, Austria)
- Author in Thin slab casting nozzle geomery design study with the aid of numerical and water modelling
Kari Välimaa (Ovako Imatra Oy, Finland)
- Author in Applicability of heat transfer and solidification simulations in investigating microstructural banding in continuously cast steel
Cornelis van der Bent
- Co-author in Interpretation of the state of the blast furnance hearth by wear-model analysis
Dirk van der Plas
- Co-author in CFD modelling on impact of plug clogging in industrial scale steel ladles
Diana Vasallo
- Co-author in Modeling Contact and Friction at the Mold-strand Gap through Lubrication and Contact Indexes
Alessio Ventua (Rina Centro Sviluppo Materiali)
- Co-author in Application of process simulation strategies in off line prediction models and on-line Decision Support Systems with through process approach on Feralpi sites
Robert Vertnik
- Co-author in A temperature, concentration, stress and grain structure slice model for continuous casting of steel
Robert Vertnik
- Co-author in Large eddy simulation of continuous casting process
Alija Vila
- Author in Roller geometry optimization in order to minimize unsteady bulging of slab casters
Ville-Valtteri Visuri
- Author in Dynamic changes in slag properties during the reduction stage of the AOD process
- Author in Model predictive control of the AOD process for material and energy optimisation
Ville-Valtteri Visuri
- Co-author in Online 3D Heat Transfer and Solidification/Microstructure Models and their Capabilities for Simulation of Continuous Casting of Steel and Quality Prediction
Norbert Vogl
- Co-author in Recent modeling approaches to close-coupled atomization for powder production
Marko Vogric
- Author in Multiscale homogenization of elastic properties in hypereutectoid steel
Sandra Vollmann
- Co-author in Application of Liquid-Liquid Mass Transfer for a Steel Ladle
Rohit Voothaluru
- Co-author in Unravelling the competing effects of chemical composition and grain size in affecting austenite stability in high carbon steels
Bernhard Voraberger
- Co-author in Simulation based Proof-of-Concept for Plant Transformation from Integrated BOF towards Hybrid BOF/EAF Production Route
Josef Walek
- Co-author in Analysis of inclusions removal during steel flow in multi-strand tundish using numerical modelling
Weiling Wang
- Author in Influence Mechanisms of Processing Parameters on Solidification Structure of Continuously Cast Steel
- Co-author in Numerical Simulation of Free Grain Sedimentation in Continuously Cast Billet
Qiang Wang (Wuhan University of Science and Technology)
- Author in Numerical Simulation on Refractory Wear and Inclusion Formation in Continuous Casting Tundish
Changjun Wang
- Author in Numerical Simulation of Solid Shell Distribution in a Funnel Shape Mold under Electromagnetic Braking and Strand Electromagnetic Stirring
Xiaoyu Wang
- Author in Study of Bubble Breakup and Coalescence in Gas-Stirred Ladle Refining Process
Zhaohui Wang
- Author in Numerical Simulation of Free Grain Sedimentation in Continuously Cast Billet
Fang Wang
- Co-author in Metallurgical Data Science for Steel Industry
Stein O. Wasbø
- Co-author in Model predictive control of the AOD process for material and energy optimisation
Josef Watzinger
- Co-author in Modelling Asymmetric Flow in the Thin Slab Casting Mould under Electromagnetic Brake
Irene Watzinger
- Co-author in Roller geometry optimization in order to minimize unsteady bulging of slab casters
Han Wei
- Co-author in CFD-DEM simulation of dynamics of the upper part of the blast furnance
Bernd Weiß
- Author in Optimization of integrated steel plants operation using the m.simtop strategic planning platform
- Co-author in A new sinter plant model for flowsheet simulations
Markus Widder
- Author in Digital Process and Product Twin for hot rolling
Philipp Wieser
- Co-author in Roller geometry optimization in order to minimize unsteady bulging of slab casters
Bernd Willers
- Co-author in Experimental study of turbulent flow in a continuous casting mold under the influence of an EMBr at various positions
- Co-author in Model experiments in a liquid metal mockup focusing on the bubble dynamics in a steel ladle
Peter Wimmer
- Co-author in Flow control in continuous slab casting by local electromagnetic braking
Raimund Wincor
- Co-author in Continuous Casting Mold Flow with Gas Injection: Comparison of Physical and Mathematical Simulations
Thomas Wondrak
- Author in Model experiments in a liquid metal mockup focusing on the bubble dynamics in a steel ladle
- Co-author in Control of liquid metal flow in a laboratory model of a continuous caster with Electromagnetic Brake and Contactless Inductive Flow Tomography
Adriel Wong
- Author in Unravelling the competing effects of chemical composition and grain size in affecting austenite stability in high carbon steels
Menghuai Wu
- Author in Modeling of the as-cast structure and macrosegregation in the continuous casting of a steel billet: Effect of M-EMS
- Co-author in Modelling Asymmetric Flow in the Thin Slab Casting Mould under Electromagnetic Brake
- Co-author in Simulation of SEN clogging during continuous casting of Ti-ULC steel using a combined model
Marleen Wuestenenk
- Co-author in CFD modelling on impact of plug clogging in industrial scale steel ladles
Walter Wukovits
- Co-author in Optimization of integrated steel plants operation using the m.simtop strategic planning platform
Walter Wukovits
- Co-author in A new sinter plant model for flowsheet simulations
Zicheng Xin (State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing)
- Author in Thermodynamic Performance Optimization of CaO-SiO2-MgO-Al2O3 Slag System Based on Response Surface Methodology and Multiobjective Optimization
Wen Yan (Wuhan University of Science and Technology)
- Author in Numerical Simulation on Refractory Wear and Inclusion Formation in Continuous Casting Tundish
Hyunjin Yang
- Author in Modeling Contact and Friction at the Mold-strand Gap through Lubrication and Contact Indexes
Xiaoan Yang
- Author in Prediction of mechanical properties of hot rolled steel plates using neural network and statistical method
- Co-author in DEVELOPMENT OF A THICK STEEL PLATE MANUFACTURING ROUTE
Xiaoan Yang
- Co-author in Metallurgical Data Science for Steel Industry
Hongbin Yin
- Author in Distribution of TiN precipitates in high Ti UHSS grade conventional thick slab
Jun Yin (KTH)
- Author in Experimental and numerical study of the open eye in the uphill teeming ingot casting process
Yaowei Yu
- Co-author in CFD-DEM simulation of dynamics of the upper part of the blast furnance
Stéphane Zaleski
- Co-author in Liquid-liquid mass transfer in steelmaking processes
Sabine Zamberger
- Co-author in From ladle to wire: Integration of calphad-based design and traditional through process modelling approaches
Jiangshan Zhang
- Co-author in Effect of bottom tuyere blockage on the mixing efficiency of molten bath in a converter
- Co-author in Thermodynamic Performance Optimization of CaO-SiO2-MgO-Al2O3 Slag System Based on Response Surface Methodology and Multiobjective Optimization
Zhao Zhang
- Co-author in Modeling of the as-cast structure and macrosegregation in the continuous casting of a steel billet: Effect of M-EMS
Haijie Zhang
- Co-author in Modeling of the as-cast structure and macrosegregation in the continuous casting of a steel billet: Effect of M-EMS
xiaomeng zhang
- Author in On the removal of a spherical Al2O3 inclusion at the steel-slag interface: A numerical study
Junguo Zhang (Tangshan Branch, Hebei Iron and Steel Co., Ltd.)
- Co-author in Thermodynamic Performance Optimization of CaO-SiO2-MgO-Al2O3 Slag System Based on Response Surface Methodology and Multiobjective Optimization
Jin Zheng (Tangshan Branch, Hebei Iron and Steel Co.)
- Co-author in Thermodynamic Performance Optimization of CaO-SiO2-MgO-Al2O3 Slag System Based on Response Surface Methodology and Multiobjective Optimization
Chenn Zhou
- Co-author in Development of a Prediction Simulator Software for Blast Furnace Operation
- Co-author in Numerical Investigation of Air-Mist Spray in the Secondary Cooling during Continuous Casting of Steel
- Co-author in Numerical Modeling of Scrap Melting and Heat Transfer During Electrode Bore-In IN AC EAF
Lei Zhou
- Co-author in Steel strip hot runout table simulation and high temperature electromagnetic measurement for phase transformation monitoring
Miaoyong Zhu
- Author in Study of Bubble Breakup and Coalescence in Gas-Stirred Ladle Refining Process
- Co-author in Influence Mechanisms of Processing Parameters on Solidification Structure of Continuously Cast Steel
- Co-author in Numerical Simulation of Free Grain Sedimentation in Continuously Cast Billet
- Co-author in Using a Multiphase Model to Study the Solidification Structure and Macrosegregation in Continuous Casting Process
Jihad Zraibi (AeonX AI)
- Co-author in Search for Compositionally Complex Coating Materials for a Sustainable Steel Industry