20th International Forgemasters Meeting - IFM 2017

Name: 20th International Forgemasters Meeting - IFM 2017
Start: 2017-09-11T07:30:00+00:00
End: 2017-09-15T18:00:00+00:00
Location: Congress Graz, Austria

11–15 Sept 2017

Congress Graz, Austria

UTC timezone

Author List

Gustavo Acarine Ferraz de Campos
- Author in The Effect of Forging Temperature on the Mechanical Properties of AISI 4130 Engineering Steel
- Co-author in Comparison between Four Die Forging Device and Conventional Forging Processes of Cold Work Tool Steel
Shuichi Adachi
- Author in DEVELOPMENT OF SIC HEAT STORAGE MEDIA AND IMPROVEMENT OF THE COMBUSTION EFFICIENCY FOR HEATING FURNACES
Shingo AGATA (FUJI OOZX Inc.)
- Co-author in DEVELOPMENT AND INSTALLATION OF ADVANCED MULTI-FUNCTIONAL HYDRAULIC PRESS, INTENDED TO IMPROVE ENGINE VALVE QUALITY
Sinan Al-Bermani
- Author in Dimensional control during forging: the 3D Laser Measurement System
- Co-author in A New Experimental Methodology for Predicting Through Thickness Property Variation in Large Forgings
- Co-author in Understanding Macrosegregation in Ingots
Zimmer Alexander
- Co-author in Ultrasonic Computed Tomography – Pushing the Boundaries of the Ultrasonic Inspection of Forgings
Mohammed Al-Husseini
- Co-author in Qualification of Hollow Ingot Technology in Safety Critical Forgings and Fabrications
LUCA AMBROSONI
- Author in TAILOR MADE DESIGN FOR FORGING PRESS
- Co-author in IMPROVEMENT OF FATIGUE PERFORMANCES ON WELDED STRUCTUAL FRAMES OF FORGING PRESS
Akihiro AOYAMA (The Japan Steel Works, Ltd.)
- Author in DEVELOPMENT OF SIC HEAT STORAGE MEDIA AND IMPROVEMENT OF THE COMBUSTION EFFICIENCY FOR HEATING FURNACES
Takefumi Arikawa
- Co-author in Application of Optimum Forging Pass Schedule for the void consolidation
Takeshi Arima
- Co-author in STUDY ON EVALUATION FACTORS FOR VOID CLOSURE IN MULTIPASS FORGING
Norbert ASAMER
- Author in LATEST DEVELOPMENTS IN ABRASIVE CUTTING AND GRINDING OF LARGE-SCALE FORGINGS
Nobuyuki ASOU
- Co-author in DEVELOPMENT OF A NON-CONTACT MEASUREMENT SYSTEM USING IMAGING SENSOR
Martin Auer
- Co-author in New forging drive system for radial forging based on double stroke mechanism
Nick Bagshaw
- Co-author in Qualification of Hollow Ingot Technology in Safety Critical Forgings and Fabrications
Yaguan Bai
- Co-author in Development of 617 alloy rotor forging for 700oC℃ advanced USC powder plant
MAURO BALDASSI
- Author in INTEGRATED RAILWAY AXLE COMPLEX
- Author in TAILOR MADE DESIGN FOR FORGING PRESS
- Co-author in DEEP COGGING AND HIGH PACE RATE RADIAL FORGING IN ONE EQUIPMENT: DANIELI BREDA RF2
- Co-author in IMPROVEMENT OF FATIGUE PERFORMANCES ON WELDED STRUCTUAL FRAMES OF FORGING PRESS
- Co-author in SOLUTIONS ON TECHNOLOGICAL FORGING TOOLS FOR A MODERN OPEN DIE PRESS
Andrew Barrow
- Co-author in Manufacture of large disc and ring forgings in Alloy 600
Christian Barth
- Co-author in Virtual Hedging of Added Value for incremental formed parts
Martin Baues
- Co-author in Manufacture of large disc and ring forgings in Alloy 600
- Co-author in New Material and Manufacturing Developments for USC Steam Turbine Rotor Forgings
- Co-author in Ni-Base Forgings from Large Remelted Ingots
Estelle Baumbach
- Author in Manufacture of large disc and ring forgings in Alloy 600
Coline Beal
- Co-author in Development of high creep resistant MARBN steels for forged components in high efficient power plants
Nick Biba
- Co-author in Industrial implementation of ring and wheel rolling simulation
Ullrich Biebricher
- Co-author in VID – Flexibility in Refining and Integration in melt Shop
Ulrich Biebricher
- Author in Temperature distribution in ESR ingot withdrawal technology
Michael Blackmore
- Author in Dimensional control during forging: the 3D Laser Measurement System
- Author in Qualification of Hollow Ingot Technology in Safety Critical Forgings and Fabrications
Nikolaus Blaes
- Co-author in Manufacture of large disc and ring forgings in Alloy 600
- Co-author in New Material and Manufacturing Developments for USC Steam Turbine Rotor Forgings
Benedikt Blitz
- Author in Update on Forged Special Steels, Remelting and Powder Metallurgy
Dieter Bokelmann
- Author in Review and Recent Trends in Main Topics of IFM-Conferences 1954 - 2017 and Conclusions
Franco Bonollo
- Co-author in HEAT TREATMENT EFFECTS ON MICROSTRUCTURE, MECHANICAL PROPERTIES AND DURABILITY OF UNS N06625 ROLLED RINGS FOR OIL & GAS APPLICATIONS
ROBERTO BONORA
- Author in IMPROVEMENT OF FATIGUE PERFORMANCES ON WELDED STRUCTUAL FRAMES OF FORGING PRESS
- Author in INTEGRATED RAILWAY AXLE COMPLEX
- Author in SOLUTIONS ON TECHNOLOGICAL FORGING TOOLS FOR A MODERN OPEN DIE PRESS
- Author in TAILOR MADE DESIGN FOR FORGING PRESS
- Co-author in DEEP COGGING AND HIGH PACE RATE RADIAL FORGING IN ONE EQUIPMENT: DANIELI BREDA RF2
Renato Borgna
- Author in Optimizing Ultrasonic Forgings Inspection by exploiting Pulse-Compression technique and multi-frequency AVG analysis
Neeraj Borwankar
- Co-author in Potential Detrimental Consequences of Stringent PWHT on Pressure Vessel Steel Forgings
- Co-author in Study of thick 1 1/4Cr- ½ Mo Steel Forgings for Heavy Wall Pressure Vessel applications using Design of Experiments
Christian Buchmaier
- Co-author in Advanced Teeming System – Development, design and operational experience with a new high performance ingot casting system
Pietro Burrascano
- Author in Optimizing Ultrasonic Forgings Inspection by exploiting Pulse-Compression technique and multi-frequency AVG analysis
- Author in Ultrasonic attenuation in a medium carbon forged component as a function of microstructure
Karsten Busch
- Co-author in Latest developments in the SMX hydraulic radial forging machine
John Cain
- Co-author in INSTALLATION AND PERFORMANCE OF A NEW 90MN OPEN DIE FORGING PRESS AT NORTH AMERICAN FORGEMASTERS
Massimo Calderini
- Author in Optimizing Ultrasonic Forgings Inspection by exploiting Pulse-Compression technique and multi-frequency AVG analysis
- Author in Ultrasonic attenuation in a medium carbon forged component as a function of microstructure
Giordano Camicia
- Author in HEAT TREATMENT EFFECTS ON MICROSTRUCTURE, MECHANICAL PROPERTIES AND DURABILITY OF UNS N06625 ROLLED RINGS FOR OIL & GAS APPLICATIONS
Yanfei Cao (Institute of Metal Research, Chinese Academy of Sciences)
- Co-author in A novel method for manufacturing qualified special steel by Forging Solidifying Metal
Fenghua Cao
- Co-author in On the deformation of dead metal zones at ingots’ ends areas during upsetting
- Co-author in On the multi-ram forging for large marine crankthrows
Zhiyuan Cao
- Co-author in Development of 617 alloy rotor forging for 700oC℃ advanced USC powder plant
HORST CERJAK
- Author in STUDY TO UNDERSTAND REVERSSIBLE TEMPER EMBRITTLEMENT OF HIGH STRENGTH STEEL
HiSang Chang
- Author in Manufacturing of Ø1,000 grade large diameter round bloom and development of cost effective hot forging process using the round bloom
- Co-author in Design and Manufacturing Technology of Large Class Main Shaft for Wind Turbine
MUKUL CHAUDHRY
- Author in IFM 2017 - Evolution and growth of CHW FORGE
Guozhen Chen
- Co-author in The Hot Ring Rolling Process for manufacturing Large Rings with As-cast Ring-shaped Billets
Huiqin Chen
- Author in The Hot Ring Rolling Process for manufacturing Large Rings with As-cast Ring-shaped Billets
Ales Chrast
- Co-author in Automated Forging And Utilization of 3D Visualization in Forging Process
DAVIDE CIBECCHINI
- Author in DEEP COGGING AND HIGH PACE RATE RADIAL FORGING IN ONE EQUIPMENT: DANIELI BREDA RF2
- Author in TAILOR MADE DESIGN FOR FORGING PRESS
- Co-author in SOLUTIONS ON TECHNOLOGICAL FORGING TOOLS FOR A MODERN OPEN DIE PRESS
Daniel Cogswell
- Co-author in DEVELOPMENT OF A HIGH FIDELITY COMPUTER MODEL OF QUENCHING OF LARGE NUCLEAR FORGINGS
- Co-author in Qualification of Hollow Ingot Technology in Safety Critical Forgings and Fabrications
Brendan Connolly
- Co-author in DEVELOPMENT, IMPLEMENTATION AND RESULTS OF LARGE BOTTOM POURED INGOTS AT ELLWOOD QUALITY STEELS
Javier Cordón
- Author in NEW GENERATION FATIGUE ENHANCED CRANKSHAFTS
Frederic Costes
- Co-author in Forged ingot casting process simulation with a powerful 3D thermo-mechanical fluid/structure numerical model
Amol Dange
- Co-author in Study of thick 1 1/4Cr- ½ Mo Steel Forgings for Heavy Wall Pressure Vessel applications using Design of Experiments
Rainer Dango
- Author in Energy Savings and Maintenance Friendliness in Special Machinery for Open Die as well as Closed Die Forging Plants
- Co-author in Automated Handling Systems for modern Heat Treatment Plants including flexible Quenching Pools with efficient Agitation
- Co-author in South Korea’s strongest Open Die Forging Plant from Planning to Commissioning
Christina Decker
- Co-author in Alternative Methods for Determining Microcleanliness: A Study Based on Hot Work Tool Steels
Emilio de Diego
- Author in NEW GENERATION FATIGUE ENHANCED CRANKSHAFTS
Andrea Di Schino
- Author in Ultrasonic attenuation in a medium carbon forged component as a function of microstructure
CLAUDIO DI STEFANO (DANIELI)
- Co-author in DEEP COGGING AND HIGH PACE RATE RADIAL FORGING IN ONE EQUIPMENT: DANIELI BREDA RF2
Andreas Diwo
- Author in Ni-Base Forgings from Large Remelted Ingots
- Co-author in Manufacture of large disc and ring forgings in Alloy 600
Bernhard Donth
- Author in New Material and Manufacturing Developments for USC Steam Turbine Rotor Forgings
- Co-author in Ni-Base Forgings from Large Remelted Ingots
matthew draper
- Author in Hydrogen Embrittlement Mitigation Techniques in High Strength Steel Manufacture
Peter Dreinhoff
- Co-author in Latest developments in the SMX hydraulic radial forging machine
Tianzeng Duan
- Co-author in Quality Control in Manufacturing Process of Large Forgings
Michal Duchek
- Author in DEVELOPMENT AND OPTIMIZATION OF A TEST FOR DETERMINING THE FRICTION COEFFICIENT
Justin Dzik
- Author in Recent Advances of Furnace and Regenerative Combustion System Design in Large Open Die Forging Applications
Andreas Eich
- Author in VID – Flexibility in Refining and Integration in melt Shop
Andrew Elliott
- Co-author in The Application of Low Frequency Melt Power in the Production of Large Scale Electro-slag Re-melted Ingots
Roberto Elvira
- Author in NEW GENERATION FATIGUE ENHANCED CRANKSHAFTS
Gerhard Epp
- Co-author in Development, Implementation and Startup of State-Of-The-Art Multi-Directional Forging Complex at Ellwood Crankshaft Group
Theodore Fandrei
- Co-author in Development of NiCrMoV Steel with Lower Nickel for Generator Rotor Forgings
Ulrike Fau
- Author in Automated ultrasonic inspection system for high performance forged parts
Alexander Felde
- Co-author in Development and Integration of Digital Technologies in Forging Processes
Paolo Ferro
- Co-author in HEAT TREATMENT EFFECTS ON MICROSTRUCTURE, MECHANICAL PROPERTIES AND DURABILITY OF UNS N06625 ROLLED RINGS FOR OIL & GAS APPLICATIONS
Henrik Franz
- Co-author in Temperature distribution in ESR ingot withdrawal technology
- Co-author in VID – Flexibility in Refining and Integration in melt Shop
Roberto Tiburcio Frota Junior
- Author in Comparison between Four Die Forging Device and Conventional Forging Processes of Cold Work Tool Steel
- Co-author in The Effect of Forging Temperature on the Mechanical Properties of AISI 4130 Engineering Steel
Nobuyuki Fujitsuna
- Co-author in Manufacturing process and mechanical properties of large-sized high tensile strength intermediate shafts
Michiaki Fukuya
- Co-author in STUDY ON EVALUATION FACTORS FOR VOID CLOSURE IN MULTIPASS FORGING
Takashi Furuhashi
- Co-author in The forging method of high chromium steel to achieve both forming and forging in 3,000Ton vertical press
Shinichi FUTAGOISHI
- Author in DEVELOPMENT AND INSTALLATION OF ADVANCED MULTI-FUNCTIONAL HYDRAULIC PRESS, INTENDED TO IMPROVE ENGINE VALVE QUALITY
Bjorn Gabrielsson
- Author in DEVELOPMENT, IMPLEMENTATION AND RESULTS OF LARGE BOTTOM POURED INGOTS AT ELLWOOD QUALITY STEELS
Alberto Gaspari
- Author in Dimensional control during forging: the 3D Laser Measurement System
Frank Gatazka
- Co-author in Development of NiCrMoV Steel with Lower Nickel for Generator Rotor Forgings
Jörg GEIDIES (ANDRITZ Maerz)
- Author in USE OF REGENERATIVE BURNER SYSTEMS IN BATCH-WISE FURNACE OPERATION
Siegfried Gelder
- Co-author in Effect of the slag composition and a protective atmosphere on chemical reactions and non-metallic inclusions during electro slag remelting of a hot-work tool steel
Sandeep Goel
- Author in Open Die Forging- Indian Scenario
Matthias Goldammer
- Co-author in Induction and Conduction Thermography: A new Surface Inspection Method Suited for the Forging Industry
Gerson Graciano
- Author in The South America Forging Industry
- Co-author in Comparison between Four Die Forging Device and Conventional Forging Processes of Cold Work Tool Steel
- Co-author in The Effect of Forging Temperature on the Mechanical Properties of AISI 4130 Engineering Steel
Yi Guo
- Co-author in Research on the near net shape forging technology for CAP1400 main pipe
Yifeng Guo
- Author in Effects of solid-liquid fraction on microstructure and mechanical properties of SKD 61 under ultra-high temperature forging
Yifeng Guo (Institute of Metal Research, Chinese Academy of Sciences)
- Co-author in A novel method for manufacturing qualified special steel by Forging Solidifying Metal
Mario Gussago
- Author in ITALIAN MARKET AND INDUSTRY OVERVIEW
Jong-mun Ha
- Co-author in Manufacturing of High Strength and Toughness Steel for Offshore Structure
Georg Haberz
- Author in Integrated Forging and Life-time Computational Simulation for Aerospace Parts – Developed for International Sourcing of Various Manufacturing Bases
TAKUYA HAMAI
- Author in Development of Forging Shape Evaluation in Open Die Forging
Mulin Han
- Co-author in STUDY ON THE KEY TECHNOLOGY & THE ROUTINE OF INTELLEGENT MANUFACTURING FOR OPEN DIE FORGING
- Co-author in STUDY ON THE KEY TECHNOLOGY & THE ROUTINE OF INTELLEGENT MANUFACTURING FOR OPEN DIE FORGING PLANTS
SangHyun Heo
- Co-author in Design and Manufacturing Technology of Large Class Main Shaft for Wind Turbine
- Co-author in Manufacturing of Ø1,000 grade large diameter round bloom and development of cost effective hot forging process using the round bloom
Paul Hibbe
- Co-author in Process integrated production of complex workpieces in open-die forging
Frank Hippenstiel
- Author in Direct quenching after forging and inductive re-heating - a new efficient process technology
Junichi Hirabayashi
- Author in EVALUATION OF MAXIMUM THICKNESS FOR FORGED SUPER DUPLEX STAINLESS STEEL PRODUCTS BY USING FEM ANALYSIS
Gerhard Hirt
- Co-author in Modelling of microstructure and damage in ring rolling
- Co-author in Process integrated production of complex workpieces in open-die forging
Josef Hodek
- Co-author in DEVELOPMENT AND OPTIMIZATION OF A TEST FOR DETERMINING THE FRICTION COEFFICIENT
Albrecht Holl
- Co-author in Latest developments in the SMX hydraulic radial forging machine
Joerg Hollerbach
- Author in Automated Handling Systems for modern Heat Treatment Plants including flexible Quenching Pools with efficient Agitation
Harald Holzgruber
- Author in Melting and Casting Technologies for the production of 9-12% Chromium Steels for the Power Generation Industry
- Author in SUPERSIZED ESR - STRATEGIES FOR THE FURTHER OPTIMIZATION AND SIZE INCREASE OF THE PROCESS
Graham Honeyman
- Author in Current Developments in the UK Forging Industry
Norio Honjo
- Author in Study about re-crystallization behavior of new Ni-base super-alloy under sub-solvus forging process
Shohei Horie
- Co-author in Manufacturing process and mechanical properties of large-sized high tensile strength intermediate shafts
Krzysztof Hornig (ANDRITZ Maerz)
- Co-author in USE OF REGENERATIVE BURNER SYSTEMS IN BATCH-WISE FURNACE OPERATION
Michael Howson
- Author in DEVELOPMENT OF A HIGH FIDELITY COMPUTER MODEL OF QUENCHING OF LARGE NUCLEAR FORGINGS
Kazunari Ido
- Co-author in EVALUATION OF MAXIMUM THICKNESS FOR FORGED SUPER DUPLEX STAINLESS STEEL PRODUCTS BY USING FEM ANALYSIS
- Co-author in Increasing of steel making capacity and solidification simulation with upsizing of the steel ingot
- Co-author in ON THE INTERMEDIATE HEAT TREATMENT OF THE FORGED WHITE CAST IRON ROLL
- Co-author in The Manufacture and Properties of Forged Combination Main Stop Valve / Control valve for Thermal Power Plant
Yu Iguchi
- Co-author in Manufacturing process and mechanical properties of large-sized high tensile strength intermediate shafts
Makoto Ikeda
- Co-author in Development of 2%CrMoV Steel Rotor Forging for Geothermal Power Generation
Tsuyoshi Ikeno
- Co-author in EVALUATION OF MAXIMUM THICKNESS FOR FORGED SUPER DUPLEX STAINLESS STEEL PRODUCTS BY USING FEM ANALYSIS
Tsuyoshi Ikeno
- Author in Increasing of steel making capacity and solidification simulation with upsizing of the steel ingot
- Co-author in ON THE INTERMEDIATE HEAT TREATMENT OF THE FORGED WHITE CAST IRON ROLL
Kiyohito Ishida
- Co-author in Development and Manufacturing of Wrought Co-Ni-Al-W-Cr Alloy “COWALOY” with High Temperature Strength and High Hot Workability.
Hitoshi Ishida
- Co-author in Improvement on the quality of Vacuum Casting Ingots by applying the Multiple Layered Refractory and the Various Sensing Equipments
sakae Izumi
- Co-author in Development of 2%CrMoV Steel Rotor Forging for Geothermal Power Generation
Frederic Jamet
- Author in Power on Demand for Forging Presses
Myeong-Su Jang (Doosan Heavy Industries & Construction)
- Co-author in Development of high performance tool steel for hot stamping and die casting of automotive parts
Wolfgang Janz
- Co-author in Direct quenching after forging and inductive re-heating - a new efficient process technology
Jaeyeol Jeon
- Author in Application of Processing Map to Hot Forging in Duplex Stainless Steel
Jae-Suk Jeong
- Author in Development of back up roll for skin pass mill with high performance by optimization of processes and alloy
- Author in Development of high performance tool steel for hot stamping and die casting of automotive parts
- Co-author in Development of material manufacturing technology and welding rods for spent nuclear fuel shipping cask
Chonghong Jiang (University & Shanghai Dianji University)
- Co-author in Study on the multi-ram forging technology of the high temperature-pressure valve body
Zhang Jin (Chinaforge)
- Author in HEAVY FORGING IN CHINA
ByeongDon Joo
- Author in Design and Manufacturing Technology of Large Class Main Shaft for Wind Turbine
- Co-author in Manufacturing of Ø1,000 grade large diameter round bloom and development of cost effective hot forging process using the round bloom
Taketomo Kageyama (TYK corporation, Environmental Materials R&D Center)
- Co-author in DEVELOPMENT OF SIC HEAT STORAGE MEDIA AND IMPROVEMENT OF THE COMBUSTION EFFICIENCY FOR HEATING FURNACES
Hideki Kakimoto
- Co-author in Application of Optimum Forging Pass Schedule for the void consolidation
Michael Kamnikar
- Author in RECENT CHANGES THAT HAVE OCCURRED IN THE NORTH AMERICAN OPEN DIE FORGING INDUSTRY
- Co-author in INSTALLATION AND PERFORMANCE OF A NEW 90MN OPEN DIE FORGING PRESS AT NORTH AMERICAN FORGEMASTERS
Sung Tae Kang (Doosan Heavy Industries & Construction)
- Co-author in Development of high performance tool steel for hot stamping and die casting of automotive parts
Celalettin Karadogan
- Author in Development and Integration of Digital Technologies in Forging Processes
Fendt Karl
- Co-author in Ultrasonic Computed Tomography – Pushing the Boundaries of the Ultrasonic Inspection of Forgings
Faris Karouni
- Author in MODELLING OF HYDROGEN REMOVAL FROM MOLTEN STEEL IN A VACUUM ARC DEGASSER
Schörner Karsten
- Co-author in Ultrasonic Computed Tomography – Pushing the Boundaries of the Ultrasonic Inspection of Forgings
Kolk Karsten
- Co-author in Ultrasonic Computed Tomography – Pushing the Boundaries of the Ultrasonic Inspection of Forgings
Milan Kasparek
- Co-author in Automated Forging And Utilization of 3D Visualization in Forging Process
Toru Katayama
- Co-author in The Manufacture and Properties of Forged Combination Main Stop Valve / Control valve for Thermal Power Plant
Sakai Katsunori
- Author in ON THE INTERMEDIATE HEAT TREATMENT OF THE FORGED WHITE CAST IRON ROLL
Keita Kawano
- Author in Development of NiCrMoV Steel with Lower Nickel for Generator Rotor Forgings
Younghoon Kim
- Co-author in Application of PAUT technique for flaw detection on large casting
NamYong Kim
- Co-author in Design and Manufacturing Technology of Large Class Main Shaft for Wind Turbine
- Co-author in Manufacturing of Ø1,000 grade large diameter round bloom and development of cost effective hot forging process using the round bloom
HunHee Kim
- Co-author in Application of PAUT technique for flaw detection on large casting
- Co-author in Development and application of automated periphery UT system for rotor forgings
Kuk-Chul Kim (Doosan Heavy Industries & Construction)
- Co-author in Development of high performance tool steel for hot stamping and die casting of automotive parts
Jeong-Wook Kim (Doosan Heavy Industries & Construction)
- Co-author in Development of high performance tool steel for hot stamping and die casting of automotive parts
byoung-koo kim
- Co-author in Development of high performance tool steel for hot stamping and die casting of automotive parts
Dong-Soo Kim
- Co-author in Development and Manufacturing of Monoblock Low Pressure Rotor Shaft Forged from 650 Ton Ingot
Jungyeup Kim
- Co-author in Development and Manufacturing of Monoblock Low Pressure Rotor Shaft Forged from 650 Ton Ingot
Dong-young Kim
- Co-author in Manufacturing of High Strength and Toughness Steel for Offshore Structure
DONG KWON KIM
- Author in Manufacturing technology development of the large forgings for replacement nuclear power plant
Byoung-Koo Kim
- Co-author in Development of material manufacturing technology and welding rods for spent nuclear fuel shipping cask
Kuk-Cheol Kim
- Author in Development of material manufacturing technology and welding rods for spent nuclear fuel shipping cask
jeongwook Kim
- Co-author in Development of back up roll for skin pass mill with high performance by optimization of processes and alloy
Byung-hoon Kim
- Co-author in Manufacturing of High Strength and Toughness Steel for Offshore Structure
Atsushi Kishimoto
- Co-author in Application of Optimum Forging Pass Schedule for the void consolidation
masateru kishinoue
- Author in Installation of advanced 500-ton forging furnaces
Jared Kitchen
- Author in A New Experimental Methodology for Predicting Through Thickness Property Variation in Large Forgings
Matthias Knabl
- Author in SUPERSIZED ESR - STRATEGIES FOR THE FURTHER OPTIMIZATION AND SIZE INCREASE OF THE PROCESS
Frederik Knauf
- Author in Latest developments in the SMX hydraulic radial forging machine
Seokhee Ko
- Co-author in Development and Manufacturing of Monoblock Low Pressure Rotor Shaft Forged from 650 Ton Ingot
Yoshihiko KOBAYASHI (Research & Development Group, Hitachi Ltd.)
- Co-author in Trial production of large sized gas turbine disk of Ni based superalloy FX550
Katsuyuki Koga
- Co-author in APPLICATION OF DEVELOPED AUTOMATED UT SYSTEMS FOR FORGED ROTORS AND DISCS
Yasuta Koike
- Co-author in DEVELOPMENT OF SIC HEAT STORAGE MEDIA AND IMPROVEMENT OF THE COMBUSTION EFFICIENCY FOR HEATING FURNACES
Uwe Konnerth
- Author in Energy Saving: New Drive Concepts for Forging Presses
Masaki KONNO (FUJI OOZX Inc.)
- Co-author in DEVELOPMENT AND INSTALLATION OF ADVANCED MULTI-FUNCTIONAL HYDRAULIC PRESS, INTENDED TO IMPROVE ENGINE VALVE QUALITY
Robert Koppensteiner
- Author in New forging drive system for radial forging based on double stroke mechanism
Gerhard Kortan
- Co-author in Macro cleanliness of big forging ingots – influence of casting parameters
T. Koseki
- Co-author in DEVELOPMENT AND INSTALLATION OF ADVANCED MULTI-FUNCTIONAL HYDRAULIC PRESS, INTENDED TO IMPROVE ENGINE VALVE QUALITY
Masakazu Koshino
- Author in The Manufacture and Properties of Forged Combination Main Stop Valve / Control valve for Thermal Power Plant
Jan Kotrch
- Author in Automated Forging And Utilization of 3D Visualization in Forging Process
Yoshihiko Koyanagi
- Author in Development and Manufacturing of Wrought Co-Ni-Al-W-Cr Alloy “COWALOY” with High Temperature Strength and High Hot Workability.
Rene Krenn
- Author in Automatic Ultrasonic Inspection of Open Die Forged Parts and Forged Steel-Bars for the Energy- and Aviation-Industry
Stefan Krusch
- Co-author in Energy Savings and Maintenance Friendliness in Special Machinery for Open Die as well as Closed Die Forging Plants
- Co-author in South Korea’s strongest Open Die Forging Plant from Planning to Commissioning
Yasuyuki Kumagai
- Co-author in DEVELOPMENT OF A NITROGEN ADDITION METHOD IN ESR PROCESS
- Co-author in DEVELOPMENT OF SIC HEAT STORAGE MEDIA AND IMPROVEMENT OF THE COMBUSTION EFFICIENCY FOR HEATING FURNACES
ARUN Shyamdeo KUMAR
- Co-author in ESTABLISHMENT OF ULTRA-MODERN QUENCHING SYSTEM & STUDY OF COOLING RATES OF HEAVY FORGINGS
Sergey Kuralekh
- Author in Analysis of two-die and four-die forging processes implemented on hydraulic forging presses and RFM
- Author in New design solutions of four-die forging devices (FDFD) and open-die forging technologies
Terutaka Kure
- Co-author in Production and Evaluation of 10-ton Class A-USC Turbine Rotor of Ni-Base Superalloy LTES700R
Hiroki Kushita
- Co-author in Increasing of steel making capacity and solidification simulation with upsizing of the steel ingot
Tohru Kuwaki
- Co-author in Installation of advanced 500-ton forging furnaces
Heekyung Kwon
- Co-author in Application of Processing Map to Hot Forging in Duplex Stainless Steel
Dmitriy Lazorkin
- Author in Analysis of two-die and four-die forging processes implemented on hydraulic forging presses and RFM
- Author in New design solutions of four-die forging devices (FDFD) and open-die forging technologies
Viktor Lazorkin
- Author in Analysis of two-die and four-die forging processes implemented on hydraulic forging presses and RFM
- Author in New design solutions of four-die forging devices (FDFD) and open-die forging technologies
Jae-Woong Lee (Doosan Heavy Industries & Construction)
- Co-author in Development of material manufacturing technology and welding rods for spent nuclear fuel shipping cask
ChaeHun Lee
- Co-author in Design and Manufacturing Technology of Large Class Main Shaft for Wind Turbine
- Co-author in Manufacturing of Ø1,000 grade large diameter round bloom and development of cost effective hot forging process using the round bloom
JinMo Lee
- Co-author in Design and Manufacturing Technology of Large Class Main Shaft for Wind Turbine
- Co-author in Manufacturing of Ø1,000 grade large diameter round bloom and development of cost effective hot forging process using the round bloom
Joung-wook Lee
- Co-author in Application of Processing Map to Hot Forging in Duplex Stainless Steel
- Co-author in Development and Manufacturing of Monoblock Low Pressure Rotor Shaft Forged from 650 Ton Ingot
- Co-author in Manufacturing of High Strength and Toughness Steel for Offshore Structure
Jae-Hyung Lee
- Co-author in Development of material manufacturing technology and welding rods for spent nuclear fuel shipping cask
Sang-Dong Lee
- Co-author in Development of material manufacturing technology and welding rods for spent nuclear fuel shipping cask
Hyun-jin LEE
- Author in Manufacturing of High Strength and Toughness Steel for Offshore Structure
In-Soo LEE (Doosan Heavy Industries & Construction Co., Ltd.)
- Author in South Korea’s strongest Open Die Forging Plant from Planning to Commissioning
Woodong Lee
- Co-author in Development and application of automated periphery UT system for rotor forgings
Hyupwoo Lee
- Co-author in Development and application of automated periphery UT system for rotor forgings
Yongtang Li
- Co-author in The Hot Ring Rolling Process for manufacturing Large Rings with As-cast Ring-shaped Billets
Dianzhong Li
- Co-author in A NOVEL MANUFACTURING PROCESS FOR HEAVY FORGINGS: ADDITIVE FORGING
- Co-author in Effects of solid-liquid fraction on microstructure and mechanical properties of SKD 61 under ultra-high temperature forging
Dianzhong Li (Institute of Metal Research, Chinese Academy of Sciences)
- Co-author in A novel method for manufacturing qualified special steel by Forging Solidifying Metal
Yiyi Li
- Co-author in A NOVEL MANUFACTURING PROCESS FOR HEAVY FORGINGS: ADDITIVE FORGING
Jingguo Li
- Author in Quality Control in Manufacturing Process of Large Forgings
Eddy Libralesso
- Author in Dimensional control during forging: the 3D Laser Measurement System
Mathias Liewald
- Co-author in Development and Integration of Digital Technologies in Forging Processes
Jiachen Liu
- Co-author in The Hot Ring Rolling Process for manufacturing Large Rings with As-cast Ring-shaped Billets
Jiansheng Liu
- Co-author in Microstructure Prediction of Nuclear Grade 316LN Austenitic Stainless Steel
Ying Liu
- Author in Research on the near net shape forging technology for CAP1400 main pipe
- Co-author in Development of mono-bloc nozzle shell for CAP1400 RPV
Martin Löffler
- Co-author in Automatic Ultrasonic Inspection of Open Die Forged Parts and Forged Steel-Bars for the Energy- and Aviation-Industry
Matteo Longin
- Co-author in HEAT TREATMENT EFFECTS ON MICROSTRUCTURE, MECHANICAL PROPERTIES AND DURABILITY OF UNS N06625 ROLLED RINGS FOR OIL & GAS APPLICATIONS
Takahiro MAKIYAMA (Research & Development Group, Hitachi Ltd.)
- Co-author in Trial production of large sized gas turbine disk of Ni based superalloy FX550
Michael Manning (GE Power)
- Author in Forging Applications and Challenges in the Power Generation Industry
Carlos Martinez
- Co-author in Effect of the slag composition and a protective atmosphere on chemical reactions and non-metallic inclusions during electro slag remelting of a hot-work tool steel
OSAMU MATSUMOTO (KOBE STEEL)
- Author in Resent Trends and Developments in the Heavy Open-Die Forging in Japan
Gabriel Mc Bain
- Co-author in Virtual Hedging of Added Value for incremental formed parts
Patrick McLaughlin
- Co-author in Recent Advances of Furnace and Regenerative Combustion System Design in Large Open Die Forging Applications
Lev Medovar
- Author in ESR PROCESS AS ADDITIVE MANUFACTURINGTECHNIQUE FOR HEAVY INGOTS AND METAMATERIALS: EXPERIENCE AND PROSPECTS
FRANCISCA MENDEZ MARTIN
- Co-author in STUDY TO UNDERSTAND REVERSSIBLE TEMPER EMBRITTLEMENT OF HIGH STRENGTH STEEL
Carlo Menegozzo
- Co-author in HEAT TREATMENT EFFECTS ON MICROSTRUCTURE, MECHANICAL PROPERTIES AND DURABILITY OF UNS N06625 ROLLED RINGS FOR OIL & GAS APPLICATIONS
Sabrina Mengaroni
- Author in Ultrasonic attenuation in a medium carbon forged component as a function of microstructure
Kazuhiro Miki
- Author in Development of High- and Intermediate-Pressure Steam Turbine Rotors for Efficient Fossil Power Generation Technology
Craig Miller
- Author in The Application of Low Frequency Melt Power in the Production of Large Scale Electro-slag Re-melted Ingots
Takayuki Miyata
- Co-author in Development of 2%CrMoV Steel Rotor Forging for Geothermal Power Generation
- Co-author in Development of NiCrMoV Steel with Lower Nickel for Generator Rotor Forgings
Manuel Molnar
- Co-author in Effect of the slag composition and a protective atmosphere on chemical reactions and non-metallic inclusions during electro slag remelting of a hot-work tool steel
Alex Monsour
- Co-author in Retained austenite measurements and magnetic response of 17-4 PH stainless steel under magnetic particle testing
Hubert Mooshofer
- Co-author in Ultrasonic Computed Tomography – Pushing the Boundaries of the Ultrasonic Inspection of Forgings
Paulo Augusto Morais De Oliveira
- Co-author in Comparison between Four Die Forging Device and Conventional Forging Processes of Cold Work Tool Steel
- Co-author in The Effect of Forging Temperature on the Mechanical Properties of AISI 4130 Engineering Steel
Kengo Mouri
- Author in STUDY ON EVALUATION FACTORS FOR VOID CLOSURE IN MULTIPASS FORGING
Michael Müller
- Co-author in Direct quenching after forging and inductive re-heating - a new efficient process technology
Michiru Nakano
- Co-author in Development of 2%CrMoV Steel Rotor Forging for Geothermal Power Generation
- Co-author in Development of NiCrMoV Steel with Lower Nickel for Generator Rotor Forgings
Rodrigo Cesar Nascimento Liberto
- Co-author in The Effect of Forging Temperature on the Mechanical Properties of AISI 4130 Engineering Steel
Stefano Neri
- Author in Optimizing Ultrasonic Forgings Inspection by exploiting Pulse-Compression technique and multi-frequency AVG analysis
- Author in Ultrasonic attenuation in a medium carbon forged component as a function of microstructure
Udo Netzelmann
- Co-author in Induction and Conduction Thermography: A new Surface Inspection Method Suited for the Forging Industry
Ingo Neubauer (simufact engineering)
- Author in Virtual Hedging of Added Value for incremental formed parts
Yihong Nie
- Co-author in Research on the near net shape forging technology for CAP1400 main pipe
Yihong Nie
- Author in Development of 617 alloy rotor forging for 700oC℃ advanced USC powder plant
Paul Josef Nieschwitz
- Co-author in Latest developments in the SMX hydraulic radial forging machine
KIYOAKI NIIMI
- Co-author in Development of Forging Shape Evaluation in Open Die Forging
Hiroki Nimura
- Co-author in APPLICATION OF LASER TRACKER FOR DIMENSIONAL INSPECTION OF LARGE FORGINGS AND ITS UNCERTAINTY EVALUATION
Katsushige Nishiguchi
- Co-author in Improvement on the quality of Vacuum Casting Ingots by applying the Multiple Layered Refractory and the Various Sensing Equipments
Takashi Nishimoto
- Author in Study about re-crystallization behavior of new Ni-base super-alloy under sub-solvus forging process
Longjiang Niu
- Co-author in On the deformation of dead metal zones at ingots’ ends areas during upsetting
- Co-author in On the multi-ram forging for large marine crankthrows
Tae-Hoon Noh
- Co-author in Development of material manufacturing technology and welding rods for spent nuclear fuel shipping cask
Masahiro Nomura
- Co-author in Application of Optimum Forging Pass Schedule for the void consolidation
Masahiro Nomura
- Co-author in Manufacturing process and mechanical properties of large-sized high tensile strength intermediate shafts
Toshiaki Nonomura
- Co-author in Development of a low thermal expansion superalloy for large forgings
- Co-author in Trial production of large sized gas turbine disk of Ni based superalloy FX550
Tomoyuki Ochiai
- Co-author in DEVELOPMENT OF SIC HEAT STORAGE MEDIA AND IMPROVEMENT OF THE COMBUSTION EFFICIENCY FOR HEATING FURNACES
Keisuke Ogata
- Author in Manufacturing process and mechanical properties of large-sized high tensile strength intermediate shafts
Joonghe Oh
- Author in Open Die Forging Market and Industry Overview in Korea
Joong He Oh
- Author in South Korea’s strongest Open Die Forging Plant from Planning to Commissioning
Satoru Ohsaki
- Co-author in Development of High- and Intermediate-Pressure Steam Turbine Rotors for Efficient Fossil Power Generation Technology
Takahiro Ohya
- Author in APPLICATION OF LASER TRACKER FOR DIMENSIONAL INSPECTION OF LARGE FORGINGS AND ITS UNCERTAINTY EVALUATION
Hiroshi Okabe
- Author in APPLICATION OF DEVELOPED AUTOMATED UT SYSTEMS FOR FORGED ROTORS AND DISCS
Takuma Okajima
- Author in Study about re-crystallization behavior of new Ni-base super-alloy under sub-solvus forging process
Toshihiro Omori
- Co-author in Development and Manufacturing of Wrought Co-Ni-Al-W-Cr Alloy “COWALOY” with High Temperature Strength and High Hot Workability.
Roman Onischenko
- Author in Analysis of two-die and four-die forging processes implemented on hydraulic forging presses and RFM
Raymundo Ordonez Olivares
- Co-author in DEVELOPMENT, IMPLEMENTATION AND RESULTS OF LARGE BOTTOM POURED INGOTS AT ELLWOOD QUALITY STEELS
Michael Orthey
- Co-author in Energy Savings and Maintenance Friendliness in Special Machinery for Open Die as well as Closed Die Forging Plants
- Co-author in South Korea’s strongest Open Die Forging Plant from Planning to Commissioning
Mototsugu Osaki
- Co-author in Development and Manufacturing of Wrought Co-Ni-Al-W-Cr Alloy “COWALOY” with High Temperature Strength and High Hot Workability.
joonsoo Park
- Co-author in Application of PAUT technique for flaw detection on large casting
- Co-author in Development and application of automated periphery UT system for rotor forgings
Jaeseok Park
- Author in Application of PAUT technique for flaw detection on large casting
- Author in Development and application of automated periphery UT system for rotor forgings
Seyong Park
- Co-author in Development of back up roll for skin pass mill with high performance by optimization of processes and alloy
Young-chul Park
- Co-author in Development of back up roll for skin pass mill with high performance by optimization of processes and alloy
Stefan Paul
- Co-author in Development of high creep resistant MARBN steels for forged components in high efficient power plants
John Paules
- Author in INSTALLATION AND PERFORMANCE OF A NEW 90MN OPEN DIE FORGING PRESS AT NORTH AMERICAN FORGEMASTERS
Jiageng PENG (University & Shanghai Dianji University)
- Author in Study on the multi-ram forging technology of the high temperature-pressure valve body
Helmut Pfeiler
- Co-author in Automatic Ultrasonic Inspection of Open Die Forged Parts and Forged Steel-Bars for the Energy- and Aviation-Industry
Stephen Phillips (Sheffield Forgemasters International Ltd.)
- Co-author in MODELLING OF HYDROGEN REMOVAL FROM MOLTEN STEEL IN A VACUUM ARC DEGASSER
Ed Pickering
- Author in Understanding Macrosegregation in Ingots
Bernhard Plank
- Co-author in Alternative Methods for Determining Microcleanliness: A Study Based on Hot Work Tool Steels
Ernst Plesiutschnig
- Author in Development of high creep resistant MARBN steels for forged components in high efficient power plants
- Co-author in Alternative Methods for Determining Microcleanliness: A Study Based on Hot Work Tool Steels
Ganna Polishko (E.O. Paton Electric Welding Institute of National Academy of Science of Ukraine)
- Co-author in ESR PROCESS AS ADDITIVE MANUFACTURINGTECHNIQUE FOR HEAVY INGOTS AND METAMATERIALS: EXPERIENCE AND PROSPECTS
Antonín Prantl
- Co-author in DEVELOPMENT AND OPTIMIZATION OF A TEST FOR DETERMINING THE FRICTION COEFFICIENT
DAVIDE PROSERPIO
- Co-author in IMPROVEMENT OF FATIGUE PERFORMANCES ON WELDED STRUCTUAL FRAMES OF FORGING PRESS
Andreas Prosswimmer
- Author in Power on Demand for Forging Presses
Gregor Przybylla
- Author in "High end descaling in forging"
Zuoyu Qi
- Author in STUDY ON THE KEY TECHNOLOGY & THE ROUTINE OF INTELLEGENT MANUFACTURING FOR OPEN DIE FORGING PLANTS
Huiping QI
- Co-author in The Hot Ring Rolling Process for manufacturing Large Rings with As-cast Ring-shaped Billets
Zuoyu QI
- Author in STUDY ON THE KEY TECHNOLOGY & THE ROUTINE OF INTELLEGENT MANUFACTURING FOR OPEN DIE FORGING
Christian Redl
- Author in Advanced Teeming System – Development, design and operational experience with a new high performance ingot casting system
Gerhard Reiter
- Co-author in Effect of the slag composition and a protective atmosphere on chemical reactions and non-metallic inclusions during electro slag remelting of a hot-work tool steel
Yunlai REN
- Author in On the deformation of dead metal zones at ingots’ ends areas during upsetting
- Author in On the multi-ram forging for large marine crankthrows
Jie Ren
- Co-author in On the deformation of dead metal zones at ingots’ ends areas during upsetting
- Co-author in On the multi-ram forging for large marine crankthrows
- Co-author in Study on the multi-ram forging technology of the high temperature-pressure valve body
Marco Ricci
- Author in Ultrasonic attenuation in a medium carbon forged component as a function of microstructure
Gerhard Richter
- Co-author in LATEST DEVELOPMENTS IN ABRASIVE CUTTING AND GRINDING OF LARGE-SCALE FORGINGS
Raymond Roberts
- Co-author in The Application of Low Frequency Melt Power in the Production of Large Scale Electro-slag Re-melted Ingots
Victor Roulet (TRANSVALOR S.A.)
- Author in Forged ingot casting process simulation with a powerful 3D thermo-mechanical fluid/structure numerical model
Ali Saad
- Co-author in Forged ingot casting process simulation with a powerful 3D thermo-mechanical fluid/structure numerical model
Marius Saiciuc
- Author in Retained austenite measurements and magnetic response of 17-4 PH stainless steel under magnetic particle testing
Tomohiro Sakaguchi
- Co-author in APPLICATION OF LASER TRACKER FOR DIMENSIONAL INSPECTION OF LARGE FORGINGS AND ITS UNCERTAINTY EVALUATION
Naoya Sato
- Author in Trial production of large sized gas turbine disk of Ni based superalloy FX550
- Co-author in Development of a low thermal expansion superalloy for large forgings
Jun Sato
- Co-author in Improvement on the quality of Vacuum Casting Ingots by applying the Multiple Layered Refractory and the Various Sensing Equipments
Akihiro Sato
- Author in Application of Optimum Forging Pass Schedule for the void consolidation
Takayuki Sato
- Co-author in Installation of advanced 500-ton forging furnaces
Matsuoka Satoshi
- Co-author in Increasing of steel making capacity and solidification simulation with upsizing of the steel ingot
Robert SAUNDERS
- Co-author in Automated ultrasonic inspection system for high performance forged parts
Hendrik Schafstall
- Co-author in Virtual Hedging of Added Value for incremental formed parts
Alexander Scheriau
- Author in SUPERSIZED ESR - STRATEGIES FOR THE FURTHER OPTIMIZATION AND SIZE INCREASE OF THE PROCESS
Ruud Schiffer
- Co-author in Automated ultrasonic inspection system for high performance forged parts
Reinhold Schneider
- Author in Effect of the slag composition and a protective atmosphere on chemical reactions and non-metallic inclusions during electro slag remelting of a hot-work tool steel
Florian Schneller
- Author in Macro cleanliness of big forging ingots – influence of casting parameters
Harald Scholz
- Co-author in Temperature distribution in ESR ingot withdrawal technology
- Co-author in VID – Flexibility in Refining and Integration in melt Shop
Wolfgang Schuetzenhoefer
- Author in Alternative Methods for Determining Microcleanliness: A Study Based on Hot Work Tool Steels
Christopher Schüller
- Co-author in Effect of the slag composition and a protective atmosphere on chemical reactions and non-metallic inclusions during electro slag remelting of a hot-work tool steel
Darrin Schwartz
- Co-author in DEVELOPMENT, IMPLEMENTATION AND RESULTS OF LARGE BOTTOM POURED INGOTS AT ELLWOOD QUALITY STEELS
Gideon Schwich
- Author in Modelling of microstructure and damage in ring rolling
Joachim Seitz
- Co-author in Modelling of microstructure and damage in ring rolling
Yuta Seki
- Author in DEVELOPMENT OF A NITROGEN ADDITION METHOD IN ESR PROCESS
Shingo Seki
- Author in DEVELOPMENT OF A NON-CONTACT MEASUREMENT SYSTEM USING IMAGING SENSOR
Luca Senni
- Author in Optimizing Ultrasonic Forgings Inspection by exploiting Pulse-Compression technique and multi-frequency AVG analysis
- Author in Ultrasonic attenuation in a medium carbon forged component as a function of microstructure
Shoitsu Seo
- Co-author in ON THE INTERMEDIATE HEAT TREATMENT OF THE FORGED WHITE CAST IRON ROLL
Dong-mun Seol
- Co-author in Manufacturing of High Strength and Toughness Steel for Offshore Structure
Tomoaki Sera
- Co-author in The forging method of high chromium steel to achieve both forming and forging in 3,000Ton vertical press
Anirudh Shastry
- Author in Potential Detrimental Consequences of Stringent PWHT on Pressure Vessel Steel Forgings
- Author in Study of thick 1 1/4Cr- ½ Mo Steel Forgings for Heavy Wall Pressure Vessel applications using Design of Experiments
Lei Shi
- Co-author in Quality Control in Manufacturing Process of Large Forgings
Tomoharu Shigeta
- Author in The forging method of high chromium steel to achieve both forming and forging in 3,000Ton vertical press
Jongho Shin
- Co-author in Application of Processing Map to Hot Forging in Duplex Stainless Steel
Yuta Shinkai
- Author in Improvement on the quality of Vacuum Casting Ingots by applying the Multiple Layered Refractory and the Various Sensing Equipments
Manas Shirgaokar
- Co-author in Development, Implementation and Startup of State-Of-The-Art Multi-Directional Forging Complex at Ellwood Crankshaft Group
Bastian Siemens
- Co-author in Advanced Teeming System – Development, design and operational experience with a new high performance ingot casting system
Ashutosh Singh
- Author in Challenges during Ultrasonic Examination of High thickness Austenitic Stainless Steel Forgings for Critical applications
Christof Sommitsch
- Co-author in Development of high creep resistant MARBN steels for forged components in high efficient power plants
Duk-Yong Song
- Author in Development and Manufacturing of Monoblock Low Pressure Rotor Shaft Forged from 650 Ton Ingot
Young-seok Song
- Co-author in Development of back up roll for skin pass mill with high performance by optimization of processes and alloy
Wolfgang Spreitzhofer
- Co-author in Macro cleanliness of big forging ingots – influence of casting parameters
Anna Staniek
- Author in Innovative technology for calibrated rolls in CELSA "Huta Ostrowiec"
Sergey Stebunov
- Author in Industrial implementation of ring and wheel rolling simulation
Ganna Stovpchenko
- Co-author in ESR PROCESS AS ADDITIVE MANUFACTURINGTECHNIQUE FOR HEAVY INGOTS AND METAMATERIALS: EXPERIENCE AND PROSPECTS
Pavel Šuchmann
- Co-author in DEVELOPMENT AND OPTIMIZATION OF A TEST FOR DETERMINING THE FRICTION COEFFICIENT
Jhin-ik Suk
- Co-author in Development of back up roll for skin pass mill with high performance by optimization of processes and alloy
- Co-author in Development of high performance tool steel for hot stamping and die casting of automotive parts
Mingyue Sun
- Author in A novel method for manufacturing qualified special steel by Forging Solidifying Metal
Jonghwan Sung
- Co-author in Application of PAUT technique for flaw detection on large casting
Heru Surya Atmadja
- Co-author in New Material and Manufacturing Developments for USC Steam Turbine Rotor Forgings
- Co-author in Ni-Base Forgings from Large Remelted Ingots
Tadashi Suzuki
- Co-author in DEVELOPMENT OF A NITROGEN ADDITION METHOD IN ESR PROCESS
Jason Swan
- Co-author in Manufacture of large disc and ring forgings in Alloy 600
Marian Szczerba
- Co-author in Innovative technology for calibrated rolls in CELSA "Huta Ostrowiec"
Li Taiyuan University of Science & Technology
- Author in Microstructure Prediction of Nuclear Grade 316LN Austenitic Stainless Steel
Hiroyuki Takabayashi
- Co-author in Development and Manufacturing of Wrought Co-Ni-Al-W-Cr Alloy “COWALOY” with High Temperature Strength and High Hot Workability.
Tatsuya Takahashi
- Co-author in Production and Evaluation of 10-ton Class A-USC Turbine Rotor of Ni-Base Superalloy LTES700R
Fumio Takahashi
- Co-author in DEVELOPMENT OF A NITROGEN ADDITION METHOD IN ESR PROCESS
Koichi Takasawa
- Co-author in Development of High- and Intermediate-Pressure Steam Turbine Rotors for Efficient Fossil Power Generation Technology
Koichi Takasawa
- Co-author in Production and Evaluation of 10-ton Class A-USC Turbine Rotor of Ni-Base Superalloy LTES700R
Jesus Talamantes-Silva
- Author in Dimensional control during forging: the 3D Laser Measurement System
- Co-author in A New Experimental Methodology for Predicting Through Thickness Property Variation in Large Forgings
- Co-author in DEVELOPMENT OF A HIGH FIDELITY COMPUTER MODEL OF QUENCHING OF LARGE NUCLEAR FORGINGS
- Co-author in MODELLING OF HYDROGEN REMOVAL FROM MOLTEN STEEL IN A VACUUM ARC DEGASSER
- Co-author in Qualification of Hollow Ingot Technology in Safety Critical Forgings and Fabrications
- Co-author in Understanding Macrosegregation in Ingots
Kenji Tamura
- Co-author in The forging method of high chromium steel to achieve both forming and forging in 3,000Ton vertical press
Fumihiko Tamura
- Co-author in Manufacturing process and mechanical properties of large-sized high tensile strength intermediate shafts
RYOJI TANAKA
- Author in Production and Evaluation of 10-ton Class A-USC Turbine Rotor of Ni-Base Superalloy LTES700R
Shinji Tanaka
- Co-author in DEVELOPMENT OF SIC HEAT STORAGE MEDIA AND IMPROVEMENT OF THE COMBUSTION EFFICIENCY FOR HEATING FURNACES
Brian Taylor
- Author in Development, Implementation and Startup of State-Of-The-Art Multi-Directional Forging Complex at Ellwood Crankshaft Group
VENKATARAMANA TENTU
- Author in ESTABLISHMENT OF ULTRA-MODERN QUENCHING SYSTEM & STUDY OF COOLING RATES OF HEAVY FORGINGS
Toshio Terasaki
- Co-author in STUDY ON EVALUATION FACTORS FOR VOID CLOSURE IN MULTIPASS FORGING
Jan Terhaar
- Co-author in Manufacture of large disc and ring forgings in Alloy 600
Aaron Teske
- Co-author in The Application of Low Frequency Melt Power in the Production of Large Scale Electro-slag Re-melted Ingots
Yasuji Toyooka
- Author in Development of 2%CrMoV Steel Rotor Forging for Geothermal Power Generation
Stefan Trabesinger
- Author in Integrated Forging and Life-time Computational Simulation for Aerospace Parts – Developed for International Sourcing of Various Manufacturing Bases
William Tracey
- Co-author in Recent Advances of Furnace and Regenerative Combustion System Design in Large Open Die Forging Applications
Erwin Tschapowetz
- Author in USE OF REGENERATIVE BURNER SYSTEMS IN BATCH-WISE FURNACE OPERATION
Takeshi Tsunezumi
- Co-author in APPLICATION OF DEVELOPED AUTOMATED UT SYSTEMS FOR FORGED ROTORS AND DISCS
Kenichi Tsuruhisa
- Co-author in Installation of advanced 500-ton forging furnaces
Takashi Ubukata
- Co-author in DEVELOPMENT OF A NITROGEN ADDITION METHOD IN ESR PROCESS
Toshihiro Uehara
- Author in Development of a low thermal expansion superalloy for large forgings
- Co-author in Trial production of large sized gas turbine disk of Ni based superalloy FX550
Shigeki Ueta
- Author in Study about re-crystallization behavior of new Ni-base super-alloy under sub-solvus forging process
- Co-author in Development and Manufacturing of Wrought Co-Ni-Al-W-Cr Alloy “COWALOY” with High Temperature Strength and High Hot Workability.
Taiichi Ueyama
- Co-author in Improvement on the quality of Vacuum Casting Ingots by applying the Multiple Layered Refractory and the Various Sensing Equipments
PRATIYUSH UTTPAL
- Co-author in ESTABLISHMENT OF ULTRA-MODERN QUENCHING SYSTEM & STUDY OF COOLING RATES OF HEAVY FORGINGS
Sergey Vinnichenko
- Co-author in Industrial implementation of ring and wheel rolling simulation
Klaus von Eynatten
- Author in SUPERSIZED ESR - STRATEGIES FOR THE FURTHER OPTIMIZATION AND SIZE INCREASE OF THE PROCESS
Johannes Vrana (Vrana GmbH - NDE Consulting and Solutions)
- Author in Induction and Conduction Thermography: A new Surface Inspection Method Suited for the Forging Industry
- Author in Ultrasonic Computed Tomography – Pushing the Boundaries of the Ultrasonic Inspection of Forgings
Satoshi Wakebe
- Co-author in The Manufacture and Properties of Forged Combination Main Stop Valve / Control valve for Thermal Power Plant
Baozhong Wang
- Author in Development of mono-bloc nozzle shell for CAP1400 RPV
- Co-author in Development of 617 alloy rotor forging for 700oC℃ advanced USC powder plant
- Co-author in On the deformation of dead metal zones at ingots’ ends areas during upsetting
- Co-author in On the multi-ram forging for large marine crankthrows
- Co-author in Research on the near net shape forging technology for CAP1400 main pipe
Li-wei Wang
- Co-author in Development of complete equipment for 125 MN double column open-die forging hydraulic press
Lingling Wang
- Author in Development of complete equipment for 125 MN double column open-die forging hydraulic press
Wolfgang Wichert
- Co-author in Advanced Teeming System – Development, design and operational experience with a new high performance ingot casting system
Volker Wieser
- Co-author in Materials and Manufacturing of Container and Stem Forgings for the Extrusion Industry
Martin Wolfgarten
- Author in Process integrated production of complex workpieces in open-die forging
Menghuai Wu
- Author in Full scale 3D simulation of the electroslag rapid remelting (ESRR) process
- Co-author in Understanding Macrosegregation in Ingots
Bradley Wynne
- Co-author in A New Experimental Methodology for Predicting Through Thickness Property Variation in Large Forgings
- Co-author in DEVELOPMENT OF A HIGH FIDELITY COMPUTER MODEL OF QUENCHING OF LARGE NUCLEAR FORGINGS
- Co-author in MODELLING OF HYDROGEN REMOVAL FROM MOLTEN STEEL IN A VACUUM ARC DEGASSER
- Co-author in Qualification of Hollow Ingot Technology in Safety Critical Forgings and Fabrications
Bijun Xie
- Author in A NOVEL MANUFACTURING PROCESS FOR HEAVY FORGINGS: ADDITIVE FORGING
- Co-author in Effects of solid-liquid fraction on microstructure and mechanical properties of SKD 61 under ultra-high temperature forging
Bijun Xie (Institute of Metal Research, Chinese Academy of Sciences)
- Co-author in A NOVEL MANUFACTURING PROCESS FOR HEAVY FORGINGS: ADDITIVE FORGING
REN XIUFENG
- Author in the world’s first super large ring rolling machine is gonna located at Shandong Iraeta Heavy Industry of China
Bin Xu
- Co-author in A novel method for manufacturing qualified special steel by Forging Solidifying Metal
Bin Xu
- Co-author in A NOVEL MANUFACTURING PROCESS FOR HEAVY FORGINGS: ADDITIVE FORGING
- Co-author in Effects of solid-liquid fraction on microstructure and mechanical properties of SKD 61 under ultra-high temperature forging
Yuhei Yamaguchi
- Co-author in DEVELOPMENT AND INSTALLATION OF ADVANCED MULTI-FUNCTIONAL HYDRAULIC PRESS, INTENDED TO IMPROVE ENGINE VALVE QUALITY
Yuko YAMAGUCHI
- Co-author in DEVELOPMENT OF A NON-CONTACT MEASUREMENT SYSTEM USING IMAGING SENSOR
Yuichi Yamamoto
- Co-author in Increasing of steel making capacity and solidification simulation with upsizing of the steel ingot
- Co-author in ON THE INTERMEDIATE HEAT TREATMENT OF THE FORGED WHITE CAST IRON ROLL
- Co-author in The Manufacture and Properties of Forged Combination Main Stop Valve / Control valve for Thermal Power Plant
Yuichi Yamamoto
- Co-author in EVALUATION OF MAXIMUM THICKNESS FOR FORGED SUPER DUPLEX STAINLESS STEEL PRODUCTS BY USING FEM ANALYSIS
Kenta Yamashita
- Author in Study about re-crystallization behavior of new Ni-base super-alloy under sub-solvus forging process
- Co-author in Development of Forging Shape Evaluation in Open Die Forging
Yasuhiko Yasumoto
- Co-author in Manufacturing process and mechanical properties of large-sized high tensile strength intermediate shafts
SunRyong Yoon
- Co-author in Design and Manufacturing Technology of Large Class Main Shaft for Wind Turbine
- Co-author in Manufacturing of Ø1,000 grade large diameter round bloom and development of cost effective hot forging process using the round bloom
Takashi Yoshida
- Co-author in Manufacturing process and mechanical properties of large-sized high tensile strength intermediate shafts
Günter Zeiler
- Author in Materials and Manufacturing of Container and Stem Forgings for the Extrusion Industry
- Co-author in Development of high creep resistant MARBN steels for forged components in high efficient power plants
Jianyang Zhang (Institute of Metal Research, Chinese Academy of Sciences)
- Co-author in A NOVEL MANUFACTURING PROCESS FOR HEAVY FORGINGS: ADDITIVE FORGING
Yigong Zhang
- Co-author in Development of complete equipment for 125 MN double column open-die forging hydraulic press
Deli Zhao
- Co-author in Development of mono-bloc nozzle shell for CAP1400 RPV
Huaishen Zhu
- Co-author in Development of 617 alloy rotor forging for 700oC℃ advanced USC powder plant
Wojciech Żurek
- Co-author in Innovative technology for calibrated rolls in CELSA "Huta Ostrowiec"