27th IFHTSE CONGRESS & EUROPEAN CONFERENCE ON HEAT TREATMENT 2022

Name: 27th IFHTSE CONGRESS & EUROPEAN CONFERENCE ON HEAT TREATMENT 2022
Start: 2022-09-05T09:00:00+02:00
End: 2022-09-08T19:00:00+02:00
Location: Wyndham Grand Salzburg Conference Center

5–8 Sept 2022

Wyndham Grand Salzburg Conference Center

Europe/Vienna timezone

Conference Secretary

Author List

Riana Ableyeva
- Author in Prospects for the use of additive manufacturing technology for manufacturing metal matrix composite materials
Abdelhafiz Alsharif (TU Graz)
- Co-author in Influence of the quenching and partitioning heat treatment process on the hydrogen embrittlement resistivity of 20MnSi steel
Marconi Antonio (University of Padova)
- Author in Multi-physics finite element simulations for induction brazing
- Author in Neural Metamodels for the Identification of Driving Parameters of an Induction Heating Process
Maialen Areitioaurtena (Ikerlan)
- Author in Induction heating modelling for tempering of low alloy steels
Kyozo Arimoto (Arimotech Ltd.)
- Author in An Overview of Researches and Standardization Activities on Test Systems for Quenchant Characterization in Japan
- Author in Simulated Strains-Based Approach for Explaining Distortion and Residual Stress in Quenched Steel Cylinder
Jerzy Barglik (Silesia University of Technology )
- Author in Calibration of model for hardening gear wheels
Laurent Barrallier (Arts et Métiers)
- Co-author in Nitriding on as quenched steel 33CrMoV12-9
Aneta Bartkowska (Poznan University of Technology)
- Author in Corrosion resistance of cryogenically treated tool steels.
Dariusz Bartkowski (Poznan University of Technology)
- Author in Corrosion resistance of cryogenically treated tool steels.
Alexandra Bauer
- Author in Improved corrosion fatigue performance of stainless steels by low temperature surface hardening
Irina Belashova (MADI University)
- Author in Gas-Cyclic Nitriding of Corrosion Resistant Steels
Zoltan Biczo (Obuda University)
- Author in Application of New Artificial Neural Network model to Predict Heat Transfer Coefficients during Quenching
Horst Biermann (TU Bergakademie Freiberg, Institute of Materials Engineering)
- Author in Influence of the total thermal cycle during wire-based cladding by means of electron beam and subsequent boriding on the microstructure and properties of the Inconel 718 layer
Horst Biermann (Institute of Materials Engineering, Technische Universität Bergakademie Freiberg, Gustav-Zeuner-Straße 5, 09599 Freiberg, Germany)
- Author in Influence of carbon contamination on the gas discharge composition in an active screen nitrocarburizing reactor
Mathieu Billet (ASCOMETAL)
- Co-author in Influence of nitrogen enrichment on microstructure and mechanical properties of a carbonidrided low steel alloy
Mathieu Billet (ASCOMETAL)
- Co-author in Influence of shot peening on carbonitrided low alloy steel
Jan Böcker (Institute of Materials Engineering, Technische Universität Bergakademie Freiberg, Gustav-Zeuner-Straße 5, 09599 Freiberg, Germany.)
- Author in Influence of carbon contamination on the gas discharge composition in an active screen nitrocarburizing reactor
Rainer Braun (BU)
- Author in Advanced developments in the field of liquid quenchants State of technique - New Requirements – Technical Perspectives
Andreas Bruggraber (voestalpine Böhler Edelstahl GmbH & CoKG)
- Author in Inductive heat treatment of high-speed steels
Daniel Buchberger
- Author in Continuous Annealing Digital Twin Implementation and Calibration
Klaus Buchner
- Author in Discussion on energy saving and emission reduction technology of heat treatment equipment
Anja Buchwalder (TU Bergakademie Freiberg, IWT)
- Author in Influence of the total thermal cycle during wire-based cladding by means of electron beam and subsequent boriding on the microstructure and properties of the Inconel 718 layer
Dominik Büschgens (RWTH Aachen University - Department for Industrial Furnaces and Heat Engineering)
- Co-author in Applying the ANSYS GEKO Turbulence Model to Simulate Jet Impingement Cooling in Continuous Heat Treatment Lines
- Co-author in Development of an individually adjustable nozzle cooling system for optimization of the strip flatness for ultra-thin precision strips: state of the art and evaluation of the solution approaches
- Co-author in Investigation methods for the determination of flow topography on horizontal surfaces in spray nozzle fields
Marc BUVRON
- Author in The ISO 20431 standard: a new quality standard for heat treatment workshops
Mario J. Cabello (Ikerlan)
- Author in Induction heating modelling for tempering of low alloy steels
Lauralice Campos Franceschini Canale (EESC - USP)
- Author in Comparison of high-severity quenchants for low-carbon steels
- Author in Salt Bath Quenching after Nitriding in AISI H13 Tool
Martin Chabicovsky
- Author in Design of cooling sections for heat treatment based on laboratory measurements of heat transfer coefficient
Maria Rita Chini (IRT M2P)
- Author in Influence of nitrogen enrichment on microstructure and mechanical properties of a carbonidrided low steel alloy
- Author in Influence of shot peening on carbonitrided low alloy steel
Thomas Christiansen (Technical University of Denmark (DTU), Department of Mechanical Engineering)
- Author in Advances in thermochemical surface engineering and heat treatment of titanium and titanium alloys
- Author in Fine grained high-interstitial stainless TRIP steel; processing and properties
- Author in High temperature solution nitriding and heat treatment of martensitic stainless steels for bearing applications
- Author in Influence of cold rolling and post annealing on low-temperature gaseous nitriding of meta-stable and nitrogen-stabilized 304 austenitic stainless steel
- Author in Recent advances in heat treatment and surface engineering within metal additive manufacturing
- Co-author in 'Ultra-low' temperature nitriding of martensitic stainless steels
Matteo Ciofani (University of Padova)
- Co-author in Neural Metamodels for the Identification of Driving Parameters of an Induction Heating Process
Vasile Danut Cojocaru (University POLITEHNICA of Bucharest)
- Author in Solution treatment duration influence on microstructural and mechanical properties of a cold-rolled Ti-Nb-Zr-Ta-Sn-Fe alloy
Elisabeta Mirela Cojocaru (University POLITEHNICA of Bucharest)
- Author in Solution treatment duration influence on microstructural and mechanical properties of a cold-rolled Ti-Nb-Zr-Ta-Sn-Fe alloy
Laurent Coudurier (Air Liquide Deutschland GmbH)
- Author in Carburizing atmospheres in heat-treatment furnaces - Contribution of industrial gases for reducing the carbon footprint
Marc Courteaux (STELLANTIS)
- Co-author in Influence of shot peening on carbonitrided low alloy steel
Marc Courteaux (STELLANTIS)
- Co-author in Influence of nitrogen enrichment on microstructure and mechanical properties of a carbonidrided low steel alloy
Thomas Dahmen (Technical University of Denmark)
- Author in Austenite aging of 17-4 PH martensitic stainless steel: phenomena, effects and implications
Anke Dalke (Institute of Materials Engineering, Technische Universität Bergakademie Freiberg, Gustav-Zeuner-Straße 5, 09599 Freiberg, Germany;)
- Author in Influence of carbon contamination on the gas discharge composition in an active screen nitrocarburizing reactor
Alexandru Dan (University POLITEHNICA of Bucharest)
- Author in Solution treatment duration influence on microstructural and mechanical properties of a cold-rolled Ti-Nb-Zr-Ta-Sn-Fe alloy
Herbert Danninger (Technische Universität Wien)
- Co-author in Hardenability of PM steel alloyed using tailored Master Alloys
Pedro José de Castro (Leibniz Institut für Werkstofforientierte Technologien)
- Author in Energy efficient manufacturing chain for advanced bainitic steels based on thermo-mechanical processing
Raquel de Oro Calderon (TU Wien)
- Co-author in Hardenability of PM steel alloyed using tailored Master Alloys
Debela Desisa (Silesian University of Technology)
- Author in Calibration of model for hardening gear wheels
Paolo Di Barba (University of Pavia)
- Author in Neural Metamodels for the Identification of Driving Parameters of an Induction Heating Process
Corentin Dides (IRT M2P)
- Co-author in Influence of nitrogen enrichment on microstructure and mechanical properties of a carbonidrided low steel alloy
- Co-author in Influence of shot peening on carbonitrided low alloy steel
Christian Dipolt (RÜBIG GmbH & Co KG)
- Co-author in PACVD- and nitriding processes as surface treatments to enhance corrosion- and wear resistance of piston rods for the hydraulic industry
Ivo Dolezel (University of West Bohemia)
- Author in Calibration of model for hardening gear wheels
Juan Dong (Leibniz-Institut für Werkstofforientierte Technologien - IWT)
- Author in Energy efficient manufacturing chain for advanced bainitic steels based on thermo-mechanical processing
Angelo Doni (InovaLab Srl - A spin-off company of University of Padova)
- Author in Multi-physics finite element simulations for induction brazing
Andreas Drexler (Graz University of Technology, Institute of Materials Science, Joining and Forming (IMAT), Research Group Tools & Forming)
- Co-author in Influence of the quenching and partitioning heat treatment process on the hydrogen embrittlement resistivity of 20MnSi steel
Fabrizio Dughiero (University of Padova)
- Author in Multi-physics finite element simulations for induction brazing
- Author in Neural Metamodels for the Identification of Driving Parameters of an Induction Heating Process
Jacky Dulcy (IRT M2P)
- Co-author in Influence of nitrogen enrichment on microstructure and mechanical properties of a carbonidrided low steel alloy
- Co-author in Influence of shot peening on carbonitrided low alloy steel
Juraj Ďurica (Institute of Materials Science, Faculty of Materials Science and Technology in Trnava, Slovak University of Technology)
- Author in Corrosion resistance of cryogenically treated tool steels.
Yvonne Dworak
- Author in Recent Developments and Perspectives of Heat Treatment in Steel Processing
- Author in The Kaleidoscope of Surface Engineering
Marina Eichemberger Martinez Mergulhão (USP - EESC)
- Author in Comparison of high-severity quenchants for low-carbon steels
Moritz Eickhoff (Department for Industrial Furnaces and Heat Engineering of the RWTH Aachen University)
- Co-author in Development of an individually adjustable nozzle cooling system for optimization of the strip flatness for ultra-thin precision strips: state of the art and evaluation of the solution approaches
Roland Eisl (ENRAG GmbH)
- Author in Continuous Annealing Digital Twin Implementation and Calibration
Jernej Ekar (Jozef Stefan Institute)
- Author in Impact of deep cryogenic treatment on nitridability and properties of nitrided hot work tool steel
Hamdi Elsayed (TU Graz)
- Author in Influence of the quenching and partitioning heat treatment process on the hydrogen embrittlement resistivity of 20MnSi steel
Jeremy Epp (Leibniz-Institut für Werkstofforientierte Technologien - IWT)
- Author in Energy efficient manufacturing chain for advanced bainitic steels based on thermo-mechanical processing
Sascha Eppensteiner (EBNER Industrieofenbau GmbH)
- Author in Continuous Annealing Digital Twin Implementation and Calibration
George E. Totten (Portland State University)
- Author in Comparison of high-severity quenchants for low-carbon steels
- Author in Salt Bath Quenching after Nitriding in AISI H13 Tool
Zi Fan
- Author in Effect of the Amount of Zr Addition on Microstructure and Mechanical Properties of CoCrFeNi High-Entropy Alloys Prepared by Mechanical Alloying and Spark Plasma Sintering
Rainer Fechte-Heinen (Leibniz-Institut für Werkstofforientierte Technologien - IWT)
- Author in Energy efficient manufacturing chain for advanced bainitic steels based on thermo-mechanical processing
- Co-author in Impact of process parameters during multi-step carbo-austempering on the hardness and microstructure morphology
- Co-author in Martensitic Induction hardening of nitrided layers
Roland Feiler
- Author in Carburizing atmospheres in heat-treatment furnaces - Contribution of industrial gases for reducing the carbon footprint
Imre FELDE (ÓBUDA UNIVERSITY)
- Author in Application of New Artificial Neural Network model to Predict Heat Transfer Coefficients during Quenching
- Author in Born of SmartQuench - In Memoriam of Dr. Soren Segerberg
- Author in Simultaneous aging and surface treatment of 3D printed maraging steel
Tomislav Filetin
- Co-author in Current Investigations at Quenching Research Centre
Alessandro Fiorese
- Author in Vacuum heat treatment of Ti6Al4V alloy produced via SLM additive manufacturing
michele forzan (University of Padova Department of Industrial Engineering)
- Author in Multi-physics finite element simulations for induction brazing
- Author in Neural Metamodels for the Identification of Driving Parameters of an Induction Heating Process
Friedhelm Frerichs (Leibniz-IWT)
- Author in Determination of machining parameters for a specific adjustment of the residual stress profile by induction hardening
- Co-author in Quenching with Aqueous Polymer Solutions
Udo Fritsching (Leibniz Institute for Materials Engineering- IWT Bremen and University of Bremen, Department of Process Engineering, Bremen )
- Co-author in Experimental and numerical investigation of heterogenous gas quenching for determining optimal heat treatment parameters
Junichi Fukui (Hatta Kogyo Co. Ltd.)
- Co-author in Active-Screen Plasma Nitriding and Carburizing of an Austenitic Stainless Steel Small-Diameter Thin Pipe
Bogdan Mihai Galbinasu (UMF Carol Davila)
- Author in Solution treatment duration influence on microstructural and mechanical properties of a cold-rolled Ti-Nb-Zr-Ta-Sn-Fe alloy
Matthew Galler (voestalpine Wire Rod Austria GmbH)
- Co-author in Influence of the quenching and partitioning heat treatment process on the hydrogen embrittlement resistivity of 20MnSi steel
André Galtier (ASCOMETAL)
- Co-author in Influence of nitrogen enrichment on microstructure and mechanical properties of a carbonidrided low steel alloy
André Galtier (ASCOMETAL)
- Co-author in Influence of shot peening on carbonitrided low alloy steel
Stefan Geroldinger
- Author in Hardenability of PM steel alloyed using tailored Master Alloys
Riccardo Gerosa (Politecnico di Milano)
- Author in Study of the influence of heat treatment on the metallurgical characteristics of the IN625 alloy
Christian Gierl-Mayer (TU Wien)
- Co-author in Hardenability of PM steel alloyed using tailored Master Alloys
Benoît Girard (IRT M2P)
- Author in Influence of nitrogen enrichment on microstructure and mechanical properties of a carbonidrided low steel alloy
- Author in Influence of shot peening on carbonitrided low alloy steel
Viktor GONDA (ÓBUDA UNIVERSITY, Donát Bánki Faculty of Mechanical and Safety Engineering)
- Author in Simultaneous aging and surface treatment of 3D printed maraging steel
Flemming Grumsen (Technical University of Denmark)
- Author in Austenite aging of 17-4 PH martensitic stainless steel: phenomena, effects and implications
J. Gseller
- Co-author in Non-destructive determination of the hardness penetration depth by laser-ultrasound
W. Haderer
- Co-author in Non-destructive determination of the hardness penetration depth by laser-ultrasound
Shun Hamashima (Graduate School of Science and Engineering, Kansai University)
- Co-author in Effects of Chromium and Nickel Screens on Plasma Nitriding with Screen
Nicolai Haupt (Leibniz-Institut für Werkstofforientierte Technologien - IWT)
- Co-author in Martensitic Induction hardening of nitrided layers
Thomas Heinrich (Bürkert Werke Gmbh & Co KG)
- Author in Intelligent Heat Treatment with digital Solutions
Paul Heinz (Schaeffler)
- Author in Combined CFD and heat treatment simulation of high-pressure gas quenching process.
B. Heise
- Co-author in Non-destructive determination of the hardness penetration depth by laser-ultrasound
Philipp Hengst (TU Bergakademie Freiberg, Institute of Materials Engineering)
- Author in Influence of the total thermal cycle during wire-based cladding by means of electron beam and subsequent boriding on the microstructure and properties of the Inconel 718 layer
Luc HERRMANN
- Author in Salt Bath Nitrocarburizing: Technology ready for future including environmental challenges
M. Hettich
- Co-author in Non-destructive determination of the hardness penetration depth by laser-ultrasound
Stefan Hock
- Author in 50 years of IFHTSE – Paths from the past to the present and beyond
Jan Hof (RWTH Aachen University - Department for Industrial Furnaces and Heat Engineering)
- Author in Investigation methods for the determination of flow topography on horizontal surfaces in spray nozzle fields
Stefanie Hoja (Leibniz-Institut für Werkstofforientierte Technologien - IWT)
- Author in Martensitic Induction hardening of nitrided layers
Richard HORVATH (ÓBUDA UNIVERSITY, Donát Bánki Faculty of Mechanical and Safety Engineering)
- Author in Simultaneous aging and surface treatment of 3D printed maraging steel
Ralph Hunger (BorTec GmbH )
- Author in Influence of the total thermal cycle during wire-based cladding by means of electron beam and subsequent boriding on the microstructure and properties of the Inconel 718 layer
Louis Huysmans (Bosch Transmission Technology B.V.)
- Co-author in Carbo-nitriding of CVT pushbelt components for further optimization of wear and fatigue properties
Dmitry Ivanov
- Author in Lifetime Enhancement of Induction Heating Coils: A Complex Approach Based on Numerical Simulations and 3D-Printing
Jurica Jačan (university assistant)
- Author in Increasing the wear resistance of high-alloy tool steels for cold work with multilayer coatings TiN/TiCN and TiN/Ti-B-N applied by the PACVD process
Saeed M. Jafarpour (Institute of Materials Engineering, Technische Universität Bergakademie Freiberg, Gustav-Zeuner-Straße 5, 09599 Freiberg, Germany)
- Author in Influence of carbon contamination on the gas discharge composition in an active screen nitrocarburizing reactor
Suzana Jakovljević (university professor)
- Author in Increasing the wear resistance of high-alloy tool steels for cold work with multilayer coatings TiN/TiCN and TiN/Ti-B-N applied by the PACVD process
Ali Reza Jam
- Author in Vacuum heat treatment of Ti6Al4V alloy produced via SLM additive manufacturing
Sébastien Jégou (Arts et Métiers)
- Author in Nitriding on as quenched steel 33CrMoV12-9
Morten Jellesen (DTU)
- Co-author in Advances in thermochemical surface engineering and heat treatment of titanium and titanium alloys
Patricia Jovičević-Klug (Institute of Metals and Technology)
- Author in Impact of deep cryogenic treatment on nitridability and properties of nitrided hot work tool steel
Kay Juckelandt (Schaeffler)
- Author in Combined CFD and heat treatment simulation of high-pressure gas quenching process.
Peter Jurči (Slovak University of Technology)
- Author in Corrosion resistance of cryogenically treated tool steels.
Ben Kahle (ALD Vacuum Technologies GmbH)
- Co-author in CO2-Reduction by enhanced energy efficiency in LPC-heat treating plants
Felix Kaiser (Department for Industrial Furnaces and Heat Engineering (RWTH Aachen University))
- Co-author in CO2-neutral process heating for carburizing furnaces – Ecological analysis and first experimental results
Anupama Kashyap
- Author in Abnormal plate type iron-carbonitrides development during salt bath nitrocarburizing of Fe-4wt.%V alloy
Clemens Kemptner
- Author in Continuous Annealing Digital Twin Implementation and Calibration
Sang-gweon Kim (Korea Institute of Industrial Technology)
- Author in Surface nitriding of aluminum using barrel and its applications
Siegfried Kleber (voestalpine Böhler Edelstahl GmbH & CoKG)
- Author in Inductive heat treatment of high-speed steels
Moritz Klusmann (WSP GmbH)
- Co-author in Applying the ANSYS GEKO Turbulence Model to Simulate Jet Impingement Cooling in Continuous Heat Treatment Lines
Zoltan Kolozsvary (Sapientia University Tg.Mures, Transilvania)
- Author in Climate change and loss of biodiversity raise new provocations on the materials science and surface engineering
Jung-Hyun Kong (Toyota Technological Institute)
- Author in Surface nitriding of aluminum using barrel and its applications
Václav Kotlan (University of West Bohemia)
- Author in Calibration of model for hardening gear wheels
Petr Kotrbacek (Brno University of Technology, Faculty of Mechanical Engineering, Heat Transfer and Fluid Flow Laboratory)
- Author in Design of cooling sections for heat treatment based on laboratory measurements of heat transfer coefficient
Janez Kovač
- Author in Impact of deep cryogenic treatment on nitridability and properties of nitrided hot work tool steel
Nikolay Koval (Institute of High Current Electronics of the Siberian Branch of the Russian Academy of Science)
- Co-author in Modification of boride layers on alloy steel by impulse electron beam
Matthias Krawinkler (RÜBIG GmbH & Co KG)
- Co-author in PACVD- and nitriding processes as surface treatments to enhance corrosion- and wear resistance of piston rods for the hydraulic industry
Simona Kresser (University of Applied Sciences Upper Austria)
- Author in Investigations on the effect of cooling rate on quenching & partitioning (Q&P) in martensitic stainless steels
Peter Krug (Cologne University of Applied Science)
- Author in Control of quench severity by applying an electric potential during heat treatment of aluminium alloys
Thomas Lampke (Technical University of Chemnitz, Institute of Materials Science and Engineering- IWW Chemnitz)
- Co-author in Experimental and numerical investigation of heterogenous gas quenching for determining optimal heat treatment parameters
Darko Landek (University profesor)
- Author in Improving the properties of K490MC tool steel after hardening accompanied with deep cryogenic treatment and plasma nitriding
- Author in Increasing the wear resistance of high-alloy tool steels for cold work with multilayer coatings TiN/TiCN and TiN/Ti-B-N applied by the PACVD process
- Co-author in Current Investigations at Quenching Research Centre
Pierre Landgraf (Technical University of Chemnitz, Institute of Materials Science and Engineering- IWW Chemnitz)
- Author in Experimental and numerical investigation of heterogenous gas quenching for determining optimal heat treatment parameters
Pascal Lasmesle
- Author in Influence of nitrogen enrichment on microstructure and mechanical properties of a carbonidrided low steel alloy
Patrice Lasne (Transvalor S.A)
- Author in Design of a Quench Ring for Proper Quenching of Small Cylinders – Initial Investigation
- Author in Design of a Quench Ring for Proper Quenching of Small Cylinders – Modified Design
Georg Lehmkuhl (Air Liquide Deutschland GmbH)
- Author in Carburizing atmospheres in heat-treatment furnaces - Contribution of industrial gases for reducing the carbon footprint
Harald Leitner
- Author in Inductive heat treatment of high-speed steels
- Author in Insufficient heat treatment and retained austenite in tool steels and high-speed steels
Carlo Lora
- Author in Vacuum heat treatment of Ti6Al4V alloy produced via SLM additive manufacturing
Klaus Löser (ALD Vacuum Technologies GmbH, Hanau, Germany)
- Author in CO2-Reduction by enhanced energy efficiency in LPC-heat treating plants
Thomas Lübben (Leibniz-IWT, Bremen, Germany)
- Author in Quenching with Aqueous Polymer Solutions
- Co-author in Determination of machining parameters for a specific adjustment of the residual stress profile by induction hardening
Stefan Lutz (Schaeffler)
- Co-author in Combined CFD and heat treatment simulation of high-pressure gas quenching process.
Donald MacKenzie (Quaker Houghton Inc.)
- Author in Characterization of Polymer Quenchants - Influence of Agitation
- Author in Design of a Quench Ring for Proper Quenching of Small Cylinders – Initial Investigation
- Author in Design of a Quench Ring for Proper Quenching of Small Cylinders – Modified Design
David Maréchal (IRT M2P)
- Co-author in Influence of nitrogen enrichment on microstructure and mechanical properties of a carbonidrided low steel alloy
- Co-author in Influence of shot peening on carbonitrided low alloy steel
Božidar Matijević (University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture)
- Author in Current Investigations at Quenching Research Centre
Sai Ramudu Meka (Indian Institute of Technology, Roorkee-India)
- Author in Cyclic application of ultrasonic shot peening and low-temperature liquid nitriding on 316 stainless steel
Roberto Ramon Mendonça (IFSP)
- Author in Comparison of high-severity quenchants for low-carbon steels
Jan Erik Menzler
- Author in Applying the ANSYS GEKO Turbulence Model to Simulate Jet Impingement Cooling in Continuous Heat Treatment Lines
Jens Mirschinka (Air Liquide Deutschland GmbH)
- Author in Carburizing atmospheres in heat-treatment furnaces - Contribution of industrial gases for reducing the carbon footprint
Undrakh Mishigdorzhiyn (Institute of Physical Materials Science Russian Academy of Sciences, Siberian Branch)
- Author in Modification of boride layers on alloy steel by impulse electron beam
T. Mitter
- Co-author in Non-destructive determination of the hardness penetration depth by laser-ultrasound
Maria Evelina Mognaschi (University of Pavia)
- Author in Neural Metamodels for the Identification of Driving Parameters of an Induction Heating Process
C. MOSCA
- Co-author in The hydrochloric acid corrosion susceptibility of steel rebars exposed to heat treatments
Christina MOSCA
- Co-author in The hydrochloric acid corrosion susceptibility of steel rebars exposed to heat treatments
Pavel Moskvin (Institute of High Current Electronics of the Siberian Branch of the Russian Academy of Science)
- Co-author in Modification of boride layers on alloy steel by impulse electron beam
Richard Müller (TU Bergakademie Freiberg, Institute of Materials Engineering)
- Author in Influence of the total thermal cycle during wire-based cladding by means of electron beam and subsequent boriding on the microstructure and properties of the Inconel 718 layer
Dawid Nadolski (Air Liquide Forschung und Entwicklung GmbH)
- Author in Carburizing atmospheres in heat-treatment furnaces - Contribution of industrial gases for reducing the carbon footprint
Koichiro Nambu (Osaka Sangyo University)
- Author in Surface nitriding of aluminum using barrel and its applications
- Co-author in Analysis of shots flight inside and outside of peening nozzle
Nithin Mohan Narayan (Leibniz Institute for Materials Engineering-IWT, Bremen, Germany)
- Author in Experimental and numerical investigation of heterogenous gas quenching for determining optimal heat treatment parameters
JAGADEESH NEDURI (Indian Institute of Technology-Roorkee, India)
- Author in Cyclic application of ultrasonic shot peening and low-temperature liquid nitriding on 316 stainless steel
Frank Niessen (Technical University of Denmark)
- Author in Austenite aging of 17-4 PH martensitic stainless steel: phenomena, effects and implications
- Author in Fine grained high-interstitial stainless TRIP steel; processing and properties
Akio Nishimoto (Kansai University)
- Author in Effects of Chromium and Nickel Screens on Plasma Nitriding with Screen
- Co-author in Active-Screen Plasma Nitriding and Carburizing of an Austenitic Stainless Steel Small-Diameter Thin Pipe
- Co-author in Carbon penetration behavior of Cr-Mo steel specimen in carburizing above eutectic temperature
- Co-author in Effect of the Amount of Zr Addition on Microstructure and Mechanical Properties of CoCrFeNi High-Entropy Alloys Prepared by Mechanical Alloying and Spark Plasma Sintering
- Co-author in Plasma nitriding properties of sintered body formed using CoCrFeNiMn high-entropy alloy powder by varying ball-milling duration
Atsushi Nishiyama
- Co-author in Active-Screen Plasma Nitriding and Carburizing of an Austenitic Stainless Steel Small-Diameter Thin Pipe
Jose Eduardo Nucci
- Author in Salt Bath Quenching after Nitriding in AISI H13 Tool
Ivica Nujic (No)
- Author in Smart sensors fulfilling the promise of the de-carbonization and IoT
MASAHIRO OKUMIYA (Toyota Technological Institute)
- Author in Surface nitriding of aluminum using barrel and its applications
- Co-author in Analysis of shots flight inside and outside of peening nozzle
Onur Özaydın (Cevher Jant Sanayii A.S.)
- Author in Analysis of the stress-relief heat treatment of aluminium alloy wheels
- Author in The effects of heat treatments on the mechanical properties of secondary aluminium alloys
Christian Paglia (SUPSI, Insitute of materials and constructions)
- Author in The hydrochloric acid corrosion susceptibility of steel rebars exposed to heat treatments
Nitin Kumar Panwar (Indian Institute of Technology, Roorkee-India)
- Author in Cyclic application of ultrasonic shot peening and low-temperature liquid nitriding on 316 stainless steel
Davide Panzeri (Politecnico di Milano)
- Author in Study of the influence of heat treatment on the metallurgical characteristics of the IN625 alloy
Massimo Pellizzari
- Author in Vacuum heat treatment of Ti6Al4V alloy produced via SLM additive manufacturing
Massimo Pellizzari (University of Trento, Dpt. Industrial Engineering)
- Author in The importance of Heat Treatment in Additive Manufacturing of tool steels and Ti alloys
Jiaxin Peng
- Author in Plasma nitriding properties of sintered body formed using CoCrFeNiMn high-entropy alloy powder by varying ball-milling duration
Bert Pennings (Bosch)
- Author in Carbo-nitriding of CVT pushbelt components for further optimization of wear and fatigue properties
Larisa Petrova (MADI University)
- Author in Gas-Cyclic Nitriding of Corrosion Resistant Steels
Herbert Pfeifer (Department for Industrial Furnaces and Heat Engineering (RWTH Aachen University))
- Co-author in Applying the ANSYS GEKO Turbulence Model to Simulate Jet Impingement Cooling in Continuous Heat Treatment Lines
- Co-author in CO2-neutral process heating for carburizing furnaces – Ecological analysis and first experimental results
- Co-author in Development of an individually adjustable nozzle cooling system for optimization of the strip flatness for ultra-thin precision strips: state of the art and evaluation of the solution approaches
- Co-author in Investigation methods for the determination of flow topography on horizontal surfaces in spray nozzle fields
Andrei Pipa
- Author in Influence of carbon contamination on the gas discharge composition in an active screen nitrocarburizing reactor
Luís Henrique Pizetta Zordão
- Author in Comparison of high-severity quenchants for low-carbon steels
- Author in Study of the influence of heat treatment on the metallurgical characteristics of the IN625 alloy
Bojan Podgornik (Institute of Metals and Technology)
- Author in Impact of deep cryogenic treatment on nitridability and properties of nitrided hot work tool steel
Michal Pohanka
- Author in Design of cooling sections for heat treatment based on laboratory measurements of heat transfer coefficient
Patrick Pouloux (ECM Technologies)
- Author in Technological Shift : from mesh-belt furnaces to a clean, compact and automated production
Jana Ptačinová (Institute of Materials Science, Faculty of Materials Science and Technology in Trnava, Slovak University of Technology)
- Author in Corrosion resistance of cryogenically treated tool steels.
Alexander Puth (Leibniz Institute for Plasma Science and Technology (INP), Felix-Hausdorff-Straße 2, 17489 Greifswald, Germany; Department of Applied Physics, Eindhoven University of Technology, Postbus 513, 5600 MB Eindhoven, The Netherlands )
- Author in Influence of carbon contamination on the gas discharge composition in an active screen nitrocarburizing reactor
Xabier Querejeta Irizar (Ikerlan)
- Author in Induction heating modelling for tempering of low alloy steels
Nico Rademacher (Department for Industrial Furnaces and Heat Engineering of the RWTH Aachen University)
- Author in Development of an individually adjustable nozzle cooling system for optimization of the strip flatness for ultra-thin precision strips: state of the art and evaluation of the solution approaches
Mihaly Reger (Óbuda University)
- Author in Simultaneous aging and surface treatment of 3D printed maraging steel
B. Reitinger
- Co-author in Non-destructive determination of the hardness penetration depth by laser-ultrasound
Barbara Rivolta (Politecnico di Milano)
- Author in Study of the influence of heat treatment on the metallurgical characteristics of the IN625 alloy
Jürgen Röpcke (Leibniz Institute for Plasma Science and Technology (INP), Felix-Hausdorff-Straße 2, 17489 Greifswald, Germany)
- Author in Influence of carbon contamination on the gas discharge composition in an active screen nitrocarburizing reactor
Yusuke Saeki (Toyota Technological Institute)
- Author in Analysis of shots flight inside and outside of peening nozzle
Lukas Sankowski (Department for Industrial Furnaces and Heat Engineering (RWTH Aachen University))
- Author in CO2-neutral process heating for carburizing furnaces – Ecological analysis and first experimental results
Ingrid Schemmel (voestalpine Böhler Edelstahl GmbH & CoKG)
- Author in Insufficient heat treatment and retained austenite in tool steels and high-speed steels
Uwe Scherf
- Author in Smart sensors fulfilling the promise of the de-carbonization and IoT
Edgar Scherleitner (Research Center for Non Destructive Testing GmbH - RECENDT)
- Author in Non-destructive determination of the hardness penetration depth by laser-ultrasound
Maximilian Schleupen (RWTH Aachen University Department for Industrial Furnaces and Heat Engineering)
- Co-author in Applying the ANSYS GEKO Turbulence Model to Simulate Jet Impingement Cooling in Continuous Heat Treatment Lines
Gunther Schmitt (ALD Vacuum Technologies GmbH)
- Co-author in CO2-Reduction by enhanced energy efficiency in LPC-heat treating plants
Nico Schmitz (Department for Industrial Furnaces and Heat Engineering / RWTH Aachen University)
- Co-author in CO2-neutral process heating for carburizing furnaces – Ecological analysis and first experimental results
Reinhold Schneider (Univ. of Appl. Sciences Upper Austria)
- Co-author in Investigations on the effect of cooling rate on quenching & partitioning (Q&P) in martensitic stainless steels
- Co-author in Replacement of Si by Al in Q&P-steels and its effect on the tempering behavior of martensite
Thomas Scholz (BURGDORF GmbH & Co. KG)
- Author in Advanced developments in the field of liquid quenchants State of technique - New Requirements – Technical Perspectives
Christian Schwotzer (Department for Industrial Furnaces and Heat Engineering (RWTH Aachen University))
- Co-author in CO2-neutral process heating for carburizing furnaces – Ecological analysis and first experimental results
Peter Seemann (EBNER Industrieofenbau GmbH)
- Author in Continuous Annealing Digital Twin Implementation and Calibration
Unai Segurajauregi (Ikerlan)
- Author in Induction heating modelling for tempering of low alloy steels
Alexander Semenov (Institute of Physical Material Science of the Siberian Branch of the Russian Academy of Science)
- Co-author in Modification of boride layers on alloy steel by impulse electron beam
Nicolae Serban (University Politehnica of Bucharest)
- Author in Solution treatment duration influence on microstructural and mechanical properties of a cold-rolled Ti-Nb-Zr-Ta-Sn-Fe alloy
Mitsuyoshi Shimaoka (National Institute of Technology, Nara College)
- Author in An Overview of Researches and Standardization Activities on Test Systems for Quenchant Characterization in Japan
Alexandre Silva Rocha (Universidade Federal do Rio Grande do Sul, Metal forming Laboratoty - LdTM)
- Author in Energy efficient manufacturing chain for advanced bainitic steels based on thermo-mechanical processing
Olivier Skiba
- Author in Solution nitriding of a Fe-0.13%C-1.2%ni-13%Cr grade steel: a theoretical and experimental study
Albert Smalcerz (Silesian University of Technology)
- Author in Calibration of model for hardening gear wheels
Marcel Somers (Technical University of Denmark)
- Author in Austenite aging of 17-4 PH martensitic stainless steel: phenomena, effects and implications
- Author in Fine grained high-interstitial stainless TRIP steel; processing and properties
- Author in High temperature solution nitriding and heat treatment of martensitic stainless steels for bearing applications
- Author in Influence of cold rolling and post annealing on low-temperature gaseous nitriding of meta-stable and nitrogen-stabilized 304 austenitic stainless steel
- Author in Recent advances in heat treatment and surface engineering within metal additive manufacturing
- Co-author in 'Ultra-low' temperature nitriding of martensitic stainless steels
- Co-author in Advances in thermochemical surface engineering and heat treatment of titanium and titanium alloys
Christof Sommitsch (TU Graz)
- Co-author in Influence of the quenching and partitioning heat treatment process on the hydrogen embrittlement resistivity of 20MnSi steel
- Co-author in Replacement of Si by Al in Q&P-steels and its effect on the tempering behavior of martensite
Christof Sommitsch (Graz University of Technology)
- Co-author in Investigations on the effect of cooling rate on quenching & partitioning (Q&P) in martensitic stainless steels
Emil Stålnacke (Swerim AB)
- Author in Contact fatigue in carbonitrided steels and the influence of retained austenite
Matthias Steinbacher (Leibniz-Institut für Werkstofforientierte Technologien - IWT)
- Author in Impact of process parameters during multi-step carbo-austempering on the hardness and microstructure morphology
- Co-author in Martensitic Induction hardening of nitrided layers
Katharina Steineder (voestalpine Steel GmbH Linz)
- Co-author in Replacement of Si by Al in Q&P-steels and its effect on the tempering behavior of martensite
Waldemar Stips (Cologne University of Applied Sciences)
- Co-author in Control of quench severity by applying an electric potential during heat treatment of aluminium alloys
Volker Strobl (RÜBIG GmbH & Co KG)
- Co-author in PACVD- and nitriding processes as surface treatments to enhance corrosion- and wear resistance of piston rods for the hydraulic industry
Tsuyoshi Sugimoto (National Institute of Technology, Asahikawa College)
- Author in Visualization of vapor film collapse mode during unsteady boiling on oil quenching by using cellular automaton simulation
Kenzo Sumiya (Hatta Kogyo Co. Ltd.)
- Author in Active-Screen Plasma Nitriding and Carburizing of an Austenitic Stainless Steel Small-Diameter Thin Pipe
Holger Surm (Leibniz-Institut für Werkstofforientierte Technologien, IWT)
- Author in Impact of process parameters during multi-step carbo-austempering on the hardness and microstructure morphology
Rainer Süß (BURGDORF GmbH & Co. KG)
- Author in Advanced developments in the field of liquid quenchants State of technique - New Requirements – Technical Perspectives
Tatiana Tarasova
- Author in Prospects for the use of additive manufacturing technology for manufacturing metal matrix composite materials
Thomas Tenostendarp (Cologne University of Applied Sciences)
- Co-author in Control of quench severity by applying an electric potential during heat treatment of aluminium alloys
Chiara Tibollo (Technical University of Denmark)
- Author in 'Ultra-low' temperature nitriding of martensitic stainless steels
Shinkichi Tokuyama (Hatta Kogyo Co. Ltd.)
- Co-author in Active-Screen Plasma Nitriding and Carburizing of an Austenitic Stainless Steel Small-Diameter Thin Pipe
Naoya Toshioka (Graduate School of Science and Engineering, Kansai University)
- Co-author in Effects of Chromium and Nickel Screens on Plasma Nitriding with Screen
Eva Troell
- Author in Quenching for the future - In memoriam of Sören Segerberg
Christoph Turk (voestalpine Böhler Edelstahl GmbH & Co KG)
- Author in Inductive heat treatment of high-speed steels
Christian Übleis (RÜBIG GmbH & Co KG)
- Co-author in PACVD- and nitriding processes as surface treatments to enhance corrosion- and wear resistance of piston rods for the hydraulic industry
Eneko Ukar (UPV-EHU)
- Author in Induction heating modelling for tempering of low alloy steels
Nikolay Ulakhanov (East Siberia State University of Technology and Management)
- Co-author in Modification of boride layers on alloy steel by impulse electron beam
Julien Valette (IRT M2P)
- Co-author in Influence of nitrogen enrichment on microstructure and mechanical properties of a carbonidrided low steel alloy
Julien Valette (IRT M2P)
- Co-author in Influence of shot peening on carbonitrided low alloy steel
Rudolf Vallant (TU Graz)
- Co-author in Influence of the quenching and partitioning heat treatment process on the hydrogen embrittlement resistivity of 20MnSi steel
Giorgio Valsecchi
- Author in Vacuum heat treatment of Ti6Al4V alloy produced via SLM additive manufacturing
Jean-Pierre H. van Helden (Leibniz Institute for Plasma Science and Technology (INP), Felix-Hausdorff-Straße 2, 17489 Greifswald, Germany)
- Author in Influence of carbon contamination on the gas discharge composition in an active screen nitrocarburizing reactor
JAN VATAVUK
- Author in Salt Bath Quenching after Nitriding in AISI H13 Tool
Matteo Villa (Technical University of Denmark)
- Author in Austenite aging of 17-4 PH martensitic stainless steel: phenomena, effects and implications
- Author in Fine grained high-interstitial stainless TRIP steel; processing and properties
- Author in High temperature solution nitriding and heat treatment of martensitic stainless steels for bearing applications
- Author in Influence of cold rolling and post annealing on low-temperature gaseous nitriding of meta-stable and nitrogen-stabilized 304 austenitic stainless steel
- Co-author in 'Ultra-low' temperature nitriding of martensitic stainless steels
- Co-author in Advances in thermochemical surface engineering and heat treatment of titanium and titanium alloys
Maxim Vorobyov (Institute of High Current Electronics of the Siberian Branch of the Russian Academy of Science)
- Co-author in Modification of boride layers on alloy steel by impulse electron beam
Annika Wagner
- Co-author in PACVD- and nitriding processes as surface treatments to enhance corrosion- and wear resistance of piston rods for the hydraulic industry
Matthias Wallner
- Author in Replacement of Si by Al in Q&P-steels and its effect on the tempering behavior of martensite
Bo Wang (DTU)
- Author in Influence of cold rolling and post annealing on low-temperature gaseous nitriding of meta-stable and nitrogen-stabilized 304 austenitic stainless steel
Fernando Warchomicka (TU Graz)
- Co-author in Influence of the quenching and partitioning heat treatment process on the hydrogen embrittlement resistivity of 20MnSi steel
Konstantin V. Werner (Technical University of Denmark)
- Author in Fine grained high-interstitial stainless TRIP steel; processing and properties
- Author in Influence of cold rolling and post annealing on low-temperature gaseous nitriding of meta-stable and nitrogen-stabilized 304 austenitic stainless steel
valerie woimbee (Faurecia Forvia)
- Author in Decarbonization plan for conventional heat-treatment facilities : CO2 contributors assessment, neutrality targets, levers and actions plan
Ryosuke YAMAMOTO
- Author in Carbon penetration behavior of Cr-Mo steel specimen in carburizing above eutectic temperature
Masashi Yoshid (Daido University)
- Author in Surface nitriding of aluminum using barrel and its applications
Filip Žanetić (university assistant )
- Author in Improving the properties of K490MC tool steel after hardening accompanied with deep cryogenic treatment and plasma nitriding
Nicoleta Zarnescu-Ivan (University POLITEHNICA of Bucharest)
- Author in Solution treatment duration influence on microstructural and mechanical properties of a cold-rolled Ti-Nb-Zr-Ta-Sn-Fe alloy
Horst Zunko (voestalpine Böhler Edelstahl GmbH & Co KG)
- Co-author in Investigations on the effect of cooling rate on quenching & partitioning (Q&P) in martensitic stainless steels
Josip ŽUPAN
- Co-author in Current Investigations at Quenching Research Centre