27th IFHTSE CONGRESS & EUROPEAN CONFERENCE ON HEAT TREATMENT 2022

5–8 Sept 2022

Wyndham Grand Salzburg Conference Center

Europe/Vienna timezone

Conference Secretary

Speaker List

Riana Ableyeva
- Speaker at Prospects for the use of additive manufacturing technology for manufacturing metal matrix composite materials
Kyozo Arimoto (Arimotech Ltd.)
- Speaker at An Overview of Researches and Standardization Activities on Test Systems for Quenchant Characterization in Japan
- Speaker at Simulated Strains-Based Approach for Explaining Distortion and Residual Stress in Quenched Steel Cylinder
Alexandra Bauer
- Speaker at Improved corrosion fatigue performance of stainless steels by low temperature surface hardening
Rainer Braun (BU)
- Speaker at Advanced developments in the field of liquid quenchants State of technique - New Requirements – Technical Perspectives
Klaus Buchner
- Speaker at Discussion on energy saving and emission reduction technology of heat treatment equipment
Anja Buchwalder (TU Bergakademie Freiberg, IWT)
- Speaker at Influence of the total thermal cycle during wire-based cladding by means of electron beam and subsequent boriding on the microstructure and properties of the Inconel 718 layer
Marc BUVRON
- Speaker at The ISO 20431 standard: a new quality standard for heat treatment workshops
Lauralice Campos Franceschini Canale (EESC - USP)
- Speaker at Comparison of high-severity quenchants for low-carbon steels
- Speaker at Salt Bath Quenching after Nitriding in AISI H13 Tool
Thomas Christiansen (Technical University of Denmark (DTU), Department of Mechanical Engineering)
- Speaker at Advances in thermochemical surface engineering and heat treatment of titanium and titanium alloys
- Speaker at Recent advances in heat treatment and surface engineering within metal additive manufacturing
Matteo Ciofani (University of Padova)
- Speaker at Neural Metamodels for the Identification of Driving Parameters of an Induction Heating Process
Vasile Danut Cojocaru (University POLITEHNICA of Bucharest)
- Speaker at Solution treatment duration influence on microstructural and mechanical properties of a cold-rolled Ti-Nb-Zr-Ta-Sn-Fe alloy
Pedro José de Castro (Leibniz Institut für Werkstofforientierte Technologien)
- Speaker at Energy efficient manufacturing chain for advanced bainitic steels based on thermo-mechanical processing
Debela Desisa (Silesian University of Technology)
- Speaker at Calibration of model for hardening gear wheels
Christian Dipolt (RÜBIG GmbH & Co KG)
- Speaker at PACVD- and nitriding processes as surface treatments to enhance corrosion- and wear resistance of piston rods for the hydraulic industry
Yvonne Dworak
- Speaker at Recent Developments and Perspectives of Heat Treatment in Steel Processing
- Speaker at The Kaleidoscope of Surface Engineering
Roland Eisl (ENRAG GmbH)
- Speaker at Continuous Annealing Digital Twin Implementation and Calibration
Hamdi Elsayed (TU Graz)
- Speaker at Influence of the quenching and partitioning heat treatment process on the hydrogen embrittlement resistivity of 20MnSi steel
Zi Fan
- Speaker at Effect of the Amount of Zr Addition on Microstructure and Mechanical Properties of CoCrFeNi High-Entropy Alloys Prepared by Mechanical Alloying and Spark Plasma Sintering
Rainer Fechte-Heinen (Leibniz-Institut für Werkstofforientierte Technologien - IWT)
- Speaker at Impact of process parameters during multi-step carbo-austempering on the hardness and microstructure morphology
Imre FELDE (ÓBUDA UNIVERSITY)
- Speaker at Application of New Artificial Neural Network model to Predict Heat Transfer Coefficients during Quenching
- Speaker at Born of SmartQuench - In Memoriam of Dr. Soren Segerberg
- Speaker at Simultaneous aging and surface treatment of 3D printed maraging steel
michele forzan (University of Padova Department of Industrial Engineering)
- Speaker at Multi-physics finite element simulations for induction brazing
Friedhelm Frerichs (Leibniz-IWT)
- Speaker at Determination of machining parameters for a specific adjustment of the residual stress profile by induction hardening
Stefan Geroldinger
- Speaker at Hardenability of PM steel alloyed using tailored Master Alloys
Magnus Grüner
- Speaker at 'Ultra-low' temperature nitriding of martensitic stainless steels
Thomas Heinrich (Bürkert Werke Gmbh & Co KG)
- Speaker at Intelligent Heat Treatment with digital Solutions
Paul Heinz (Schaeffler)
- Speaker at Combined CFD and heat treatment simulation of high-pressure gas quenching process.
Luc HERRMANN
- Speaker at Salt Bath Nitrocarburizing: Technology ready for future including environmental challenges
Stefan Hock
- Speaker at 50 years of IFHTSE – Paths from the past to the present and beyond
Jan Hof (RWTH Aachen University - Department for Industrial Furnaces and Heat Engineering)
- Speaker at Investigation methods for the determination of flow topography on horizontal surfaces in spray nozzle fields
Stefanie Hoja (Leibniz-Institut für Werkstofforientierte Technologien - IWT)
- Speaker at Martensitic Induction hardening of nitrided layers
Dmitry Ivanov
- Speaker at Lifetime Enhancement of Induction Heating Coils: A Complex Approach Based on Numerical Simulations and 3D-Printing
Sébastien Jégou (Arts et Métiers)
- Speaker at Nitriding on as quenched steel 33CrMoV12-9
Kay Juckelandt (Schaeffler)
- Speaker at Combined CFD and heat treatment simulation of high-pressure gas quenching process.
Peter Jurči (Slovak University of Technology)
- Speaker at Corrosion resistance of cryogenically treated tool steels.
Ben Kahle (ALD Vacuum Technologies GmbH)
- Speaker at CO2-Reduction by enhanced energy efficiency in LPC-heat treating plants
Anupama Kashyap
- Speaker at Abnormal plate type iron-carbonitrides development during salt bath nitrocarburizing of Fe-4wt.%V alloy
Zoltan Kolozsvary (Sapientia University Tg.Mures, Transilvania)
- Speaker at Climate change and loss of biodiversity raise new provocations on the materials science and surface engineering
Petr Kotrbacek (Brno University of Technology, Faculty of Mechanical Engineering, Heat Transfer and Fluid Flow Laboratory)
- Speaker at Design of cooling sections for heat treatment based on laboratory measurements of heat transfer coefficient
Simona Kresser (University of Applied Sciences Upper Austria)
- Speaker at Investigations on the effect of cooling rate on quenching & partitioning (Q&P) in martensitic stainless steels
Peter Krug (Cologne University of Applied Science)
- Speaker at Control of quench severity by applying an electric potential during heat treatment of aluminium alloys
Darko Landek (University profesor)
- Speaker at Improving the properties of K490MC tool steel after hardening accompanied with deep cryogenic treatment and plasma nitriding
- Speaker at Increasing the wear resistance of high-alloy tool steels for cold work with multilayer coatings TiN/TiCN and TiN/Ti-B-N applied by the PACVD process
- Speaker at Current Investigations at Quenching Research Centre
Patrice Lasne (Transvalor S.A)
- Speaker at Design of a Quench Ring for Proper Quenching of Small Cylinders – Initial Investigation
Georg Lehmkuhl (Air Liquide Deutschland GmbH)
- Speaker at Carburizing atmospheres in heat-treatment furnaces - Contribution of industrial gases for reducing the carbon footprint
Harald Leitner
- Speaker at Inductive heat treatment of high-speed steels
- Speaker at Insufficient heat treatment and retained austenite in tool steels and high-speed steels
Thomas Lübben (Leibniz-IWT, Bremen, Germany)
- Speaker at Quenching with Aqueous Polymer Solutions
Donald MacKenzie (Quaker Houghton Inc.)
- Speaker at Characterization of Polymer Quenchants - Influence of Agitation
- Speaker at Design of a Quench Ring for Proper Quenching of Small Cylinders – Modified Design
David Maréchal (IRT M2P)
- Speaker at Influence of nitrogen enrichment on microstructure and mechanical properties of a carbonidrided low steel alloy
- Speaker at Influence of shot peening on carbonitrided low alloy steel
Jan Erik Menzler
- Speaker at Applying the ANSYS GEKO Turbulence Model to Simulate Jet Impingement Cooling in Continuous Heat Treatment Lines
Undrakh Mishigdorzhiyn (Institute of Physical Materials Science Russian Academy of Sciences, Siberian Branch)
- Speaker at Modification of boride layers on alloy steel by impulse electron beam
Nithin Mohan Narayan (Leibniz Institute for Materials Engineering-IWT, Bremen, Germany)
- Speaker at Experimental and numerical investigation of heterogenous gas quenching for determining optimal heat treatment parameters
JAGADEESH NEDURI (Indian Institute of Technology-Roorkee, India)
- Speaker at Cyclic application of ultrasonic shot peening and low-temperature liquid nitriding on 316 stainless steel
Akio Nishimoto (Kansai University)
- Speaker at Effects of Chromium and Nickel Screens on Plasma Nitriding with Screen
Ivica Nujic (No)
- Speaker at Smart sensors fulfilling the promise of the de-carbonization and IoT
MASAHIRO OKUMIYA (Toyota Technological Institute)
- Speaker at Surface nitriding of aluminum using barrel and its applications
Onur Özaydın (Cevher Jant Sanayii A.S.)
- Speaker at Analysis of the stress-relief heat treatment of aluminium alloy wheels
- Speaker at The effects of heat treatments on the mechanical properties of secondary aluminium alloys
Christian Paglia (SUPSI, Insitute of materials and constructions)
- Speaker at The hydrochloric acid corrosion susceptibility of steel rebars exposed to heat treatments
Massimo Pellizzari (University of Trento, Dpt. Industrial Engineering)
- Speaker at The importance of Heat Treatment in Additive Manufacturing of tool steels and Ti alloys
Jiaxin Peng
- Speaker at Plasma nitriding properties of sintered body formed using CoCrFeNiMn high-entropy alloy powder by varying ball-milling duration
Bert Pennings (Bosch)
- Speaker at Carbo-nitriding of CVT pushbelt components for further optimization of wear and fatigue properties
Larisa Petrova (MADI University)
- Speaker at Gas-Cyclic Nitriding of Corrosion Resistant Steels
Andrei Pipa
- Speaker at Influence of carbon contamination on the gas discharge composition in an active screen nitrocarburizing reactor
Luís Henrique Pizetta Zordão
- Speaker at Study of the influence of heat treatment on the metallurgical characteristics of the IN625 alloy
Bojan Podgornik (Institute of Metals and Technology)
- Speaker at Impact of deep cryogenic treatment on nitridability and properties of nitrided hot work tool steel
Patrick Pouloux (ECM Technologies)
- Speaker at Technological Shift : from mesh-belt furnaces to a clean, compact and automated production
Xabier Querejeta Irizar (Ikerlan)
- Speaker at Induction heating modelling for tempering of low alloy steels
Nico Rademacher (Department for Industrial Furnaces and Heat Engineering of the RWTH Aachen University)
- Speaker at Development of an individually adjustable nozzle cooling system for optimization of the strip flatness for ultra-thin precision strips: state of the art and evaluation of the solution approaches
Yusuke Saeki (Toyota Technological Institute)
- Speaker at Analysis of shots flight inside and outside of peening nozzle
Lukas Sankowski (Department for Industrial Furnaces and Heat Engineering (RWTH Aachen University))
- Speaker at CO2-neutral process heating for carburizing furnaces – Ecological analysis and first experimental results
Uwe Scherf
- Speaker at Smart sensors fulfilling the promise of the de-carbonization and IoT
Edgar Scherleitner (Research Center for Non Destructive Testing GmbH - RECENDT)
- Speaker at Non-destructive determination of the hardness penetration depth by laser-ultrasound
Peter Seemann (EBNER Industrieofenbau GmbH)
- Speaker at Continuous Annealing Digital Twin Implementation and Calibration
Olivier Skiba
- Speaker at Solution nitriding of a Fe-0.13%C-1.2%ni-13%Cr grade steel: a theoretical and experimental study
Marcel Somers (Technical University of Denmark)
- Speaker at Fine grained high-interstitial stainless TRIP steel; processing and properties
Emil Stålnacke (Swerim AB)
- Speaker at Contact fatigue in carbonitrided steels and the influence of retained austenite
Tsuyoshi Sugimoto (National Institute of Technology, Asahikawa College)
- Speaker at Visualization of vapor film collapse mode during unsteady boiling on oil quenching by using cellular automaton simulation
Kenzo Sumiya (Hatta Kogyo Co. Ltd.)
- Speaker at Active-Screen Plasma Nitriding and Carburizing of an Austenitic Stainless Steel Small-Diameter Thin Pipe
Eva Troell
- Speaker at Quenching for the future - In memoriam of Sören Segerberg
Giorgio Valsecchi
- Speaker at Vacuum heat treatment of Ti6Al4V alloy produced via SLM additive manufacturing
Matteo Villa (Technical University of Denmark)
- Speaker at Austenite aging of 17-4 PH martensitic stainless steel: phenomena, effects and implications
- Speaker at High temperature solution nitriding and heat treatment of martensitic stainless steels for bearing applications
Matthias Wallner
- Speaker at Replacement of Si by Al in Q&P-steels and its effect on the tempering behavior of martensite
Bo Wang (DTU)
- Speaker at Influence of cold rolling and post annealing on low-temperature gaseous nitriding of meta-stable and nitrogen-stabilized 304 austenitic stainless steel
valerie woimbee (Faurecia Forvia)
- Speaker at Decarbonization plan for conventional heat-treatment facilities : CO2 contributors assessment, neutrality targets, levers and actions plan
Ryosuke YAMAMOTO
- Speaker at Carbon penetration behavior of Cr-Mo steel specimen in carburizing above eutectic temperature