Metal Additive Manufacturing Conference - MAMC 2022

26–28 Sept 2022

TU Graz

Europe/Vienna timezone

Conference Secretary

Speaker List

Aurelie Achille (Faurecia Caligny Material engineering manager/ Heat treatment Expert)
- Speaker at Challenges of Using Additive Metal Manufacturing in fine Blanking Tooling
Mihaela Albu (Graz Centre for Electron Microscopy)
- Speaker at Advanced microstructure investigations of metallic 3D-printed parts
Siegfried Arneitz (Institute of Materials Science, Joining and Forming, Graz University of Technology)
- Speaker at AM of the Fe-Cr-Co alloy system: Using the in- situ alloying process to manufacture magnetic parts with a defined chemical gradient
Priyanshu Bajaj (m4p material solutions GmbH)
- Speaker at Steels for Additive Manufacturing - looking at the Oil and Gas industry
Eleonora Bettini (SANDVIK ADDITIVE MANUFACTURING)
- Speaker at Development of Cobalt Free Maraging Steels for Additive Manufacturing
Benedikt Blitz (SMR Premium GmbH)
- Speaker at 'What's ahead for remelted Tool steels and update on PM & AM Tool steels'
Mário Boccalini (Institute for Technological Research)
- Speaker at Mechanical behavior of additive manufactured Nb-Ti and Ti-Nb-Zr alloys using plasma atomized and HDH powders
Alberto Bordin (ASTM International)
- Speaker at Best Practices to Implement a Part Family Certification Approach for Aviation
Simon Chan (The University of Auckland, New Zealand)
- Speaker at A cost-effective hybrid approach for the manufacturing of a high-performance injection mould inserts using the laser-powder-bed-fusion process
claude Colasse
- Speaker at Challenges of Using Additive Metal Manufacturing in fine Blanking Tooling
Martin Dopler (hightech metal Prozessentwicklungsgesellschaft mbH)
- Speaker at Copper Alloys for Additive Manufacturing Processes
Yvonne Dworak
- Speaker at A toolbox towards first-time-right production in powder bed fusion
Sara Garmendia Alustiza (Mondragon University)
- Speaker at Enhanced cooling by conformal cooling of additively manufactured wire drawing tools made of cemented carbides
Rudolf Gradinger (LKR Leichtmetallkompetenzzentrum Ranshofen GmbH)
- Speaker at Investigations into the robustness of additively manufactured, embedded electrical conductors
Lasse Haahr-Lillevang (Danish Technological Institute)
- Speaker at Rapid material multiparameter optimization for small scale series productions in PBF-LB/M
Franz Haas (Institute of Production Engineering, Graz University of Technology)
- Speaker at Functional prototype for the validation of the innovative metal additive manufacturing SLEDM process
György Attila Harakály (Incus GmbH)
- Speaker at Lithography-based Metal Manufacturing: Technique, Materials & Applications
Christoph Holzinger
- Speaker at 3DWelding - Additive Fabrication of Structural Steel Elements
Amir Horr (senior Scientist)
- Speaker at On Reduced and Detailed Simulations of Additive Manufacturing Processes
Eduard Hryha (Chalmers University of Technology/Centre for Additive Manufacturing - Metal (CAM2))
- Speaker at Powder for Metal Additive Manufacturing: Properties and degradation
Christopher Hulme-Smith (KTH Royal Institute of Technology)
- Speaker at Comparison of Novel Powder Spredability Test and Established Flowability Metrics
Norberto Jimenez Mena (CRM group)
- Speaker at Printing and repair of AA7xxx components with a novel Al composition using Laser Metal Deposition
Stefan Karanovic (AVL List GmbH)
- Speaker at Additive Manufacturing for Advanced Automotive Measurement Systems - Opportunities & Challenges
Jonas Kimme (TU Chemnitz)
- Speaker at Novel process approach for additive manufacturing using inductive wire melting by forced droplet detachment
Andreas Klug (AVL List GmbH)
- Speaker at Additive Manufacturing for Advanced Automotive Measurement Systems - Opportunities & Challenges
Henrik Kruse (RWTH Aachen University Chair Digital Additive Production DAP)
- Speaker at Mechanical behavior and anisotropy of material properties of additively manufactured lattice structures
Agata Kulig
- Speaker at Surface refinement of additively manufactured components: microstructure and mechanical properties
Thomas Leitner (voestalpine BÖHLER Edelstahl GmbH & Co KG)
- Speaker at Thermophysical property measurement to support additive manufacturing
Tim Gerrit Lücke
- Speaker at Influence of laser power and scan speed on the formation of hot cracks during the processing of high-speed steel HS2-2-2 by laser powder bed fusion
Mahdi Mahmoudiniya (Ghent University)
- Speaker at Microstructure and texture development during printing of Fe-Ni alloy on a ductile cast iron substrate by Wire and Arc Additive Manufacturing
Benjamin Meier (Joanneum Research Forschungsgmbh)
- Speaker at High Temperature Tensile Strength of Ti6Al4V Processed by L-PBF – Influence of Microstructure and Heat Treatment
Benjamin Merz
- Speaker at Concepts for bridging voids in Metal Additive Manufacturing for repair of gas turbine blades using Laser Powder Bed Fusion
Lisa Minkowitz (Technische Universität Graz)
- Speaker at Mechanical Properties of a Zirconium and Tungsten Carbide modified Al-Mg-Sc-Zr alloy (AA5024) processed by Laser Powder Bed Fusion (L-PBF)
Bartosz Morończyk (Warsaw University of Technology Materials Science and Engineering Division)
- Speaker at Ultrasonic atomization of Fe-based soft magnetic alloys
Sara Munktell (Swerim AB)
- Speaker at Influence of post-processing on corrosion resistance of additively manufactured stainless steel
Rafael Paiotti Marcondes Guimaraes (TU Graz)
- Speaker at Laser powder bed fusion of Ni-rich NiTi by in situ alloying: an exploratory study on the printing of defect-free parts
- Speaker at Wire-based electron beam additive manufacturing of Ni-rich NiTi Shape Memory Alloy
Andreas Pelz
- Speaker at Clean and reliable metal powders – a statistical approach
Carsten Putz
- Speaker at Variant flexible Hairpin Stator (E-Motor) Production through Parametric Modeling and Additive Tooling
Markus Ramsperger
- Speaker at Electron Beam Based Additive Manufacturing of Highly Alloyed Tool Steels and Tungsten Carbide Metal Matrix Composites: - From Research to Industrialization -
Karin Ratschbacher (GfE Metalle und Materialien GmbH)
- Speaker at Production routes for spezialized powders
Gregor Reinalter
- Speaker at Hybrid cast and wire arc additive manufacturing of an aluminium component for the automotive industry
Christian Repitsch (m4p material solutions GmbH)
- Speaker at Aluminum powders beyond standard applications
Manel Rodriguez Ripoll (AC2T research GmbH)
- Speaker at Microstructural design of self-lubricating metals for forming processes and aerospace applications using laser metal deposition (invited)
Kamran Saeidi (Siemens Energy)
- Speaker at Effects of layer thickness and laser energy input on the solution annealing behavior of a laser powder bed fusion processed 316L stainless steel
- Speaker at Effect of minor alloying additions on the stress-rupture properties of a modified Hastelloy X fabricated by additive manufacturing
Jasmin Saewe (Fraunhofer Institut für Lasertechnik)
- Speaker at Acceleration of the LPBF process
Nico Schmitt (RWTH Aachen University - DAP)
- Speaker at Application of the 3D-EHLA process for agile alloy development
Wolfgang Schöffmann (AVL List GmbH)
- Speaker at Powertrain Development with Additive Manufactured Components – from Prototyping to Dedicated Production Design
Stefan Seidel (CTO - Pankl Racing Systems AG)
- Speaker at Additive Manufacturing – a game-changer in Automotive engineering
Jörg Steiner (voestalpine Giesserei Linz GmbH)
- Speaker at Optimization of a Casted Part in 3D Sand Printing in Comparison to other AM Technologies
Raphael Tiefnig (Herr)
- Speaker at New calculation software for analytic support structure optimization in metal additive manufacturing
Christopher Wallis (RHP Technology GmbH)
- Speaker at Investigations of Plasma Metal Deposition (PMD) of 6061 and 7075 aluminum alloys for aerospace and automotive applications
Martin White (ASTM International)
- Speaker at Best Practices to Implement a Part Family Certification Approach for Aviation
Armin Wiedenegger (voestalpine Additive Manufacturing Center)
- Speaker at AM in tooling – Much more than conformal cooling