Metal Additive Manufacturing Conference - MAMC 2021

Name: Metal Additive Manufacturing Conference - MAMC 2021
Start: 2021-11-03T08:00:00+01:00
End: 2021-11-05T18:00:00+01:00
Location: Wirtschaftskammer Österreich

3–5 Nov 2021

Wirtschaftskammer Österreich

Europe/Vienna timezone

Conference Secretary

Author List

Magnus Ahlfors (Quintus Technologies AB)
- Co-author in Optimized HIP and Heat Treatment for Fatigue Strength of Additively Manufactured Ti6Al4V
Mihaela Albu
- Author in Correlative microstructure investigations of additive manufactured parts
Sasan Amirabdollahian (University of Trento)
- Author in Microstructure and heat treatment of a ultrahigh strength Maraging steel fabricated by Direct laser metal deposition
Thomas Ammann
- Co-author in Cracking behavior of a Zr-Blended Al-Zn-Mg alloy processed by powder bed fusion of metals using a laser beam under different process gas mixtures
Sebastian Aagaard Andersen (Technical University of Denmark)
- Author in New high strength and corrosion resistant stainless steels by AM via modification of feedstock powders
Henrik Andersson (Uddeholm AB)
- Author in Prediction of residual stress development and subsequent springback deformation for the laser powder bed fusion process using multiple modelling strategies and a comprehensive validation framework
Markus Apel
- Co-author in Computational design of high γ′ nickel-based superalloys for laser powder bed fusion
Enrique Ariza
- Co-author in Integration of cooling channels in additive manufactured parts using PMD® (Plasma Metal Deposition)
Siegfried Arneitz
- Author in Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system
Mikael Åsberg
- Author in Evolution of microstructure and properties after heat treatment and HIP of E-PBF cold work tool steel
Nader Asnafi (Örebro University)
- Author in Cyber-Physically controlled Smart Additive Manufacturing system (CPSAM)
PASCAL AUBRY
- Co-author in Integration of optical fibers in parts resulting from additive metal fabrication processes
Stefan Augl (University of Applied Sciences Upper Austria)
- Co-author in 3D printed tools to reduce residual stresses, thinning and martensite content during deep drawing of metastable austenitic steels
Siegfried Baehr
- Author in Cracking behavior of a Zr-Blended Al-Zn-Mg alloy processed by powder bed fusion of metals using a laser beam under different process gas mixtures
Bassem Barkia
- Co-author in Effect of cold rolling on the microstructure and the mechanical properties of 316L stainless steel parts produced by Laser Powder Bed Fusion
Dominik Bauer
- Author in Process gas and its influence on additive manufactured AlSi10Mg
Felix Benn (Queen's University Belfast)
- Author in Laser Powder Bed Fusion of bioresorbable Magnesium-Rare Earth alloy for orthopaedic application: A parameter study including a novel tensile scaffold design
Mirnes Berbic
- Author in Thermomechanical and thermochemical endurance of hot work tool steels and PVD-coatings for high pressure die casting
Marcin Bielecki
- Author in Manufacturing of metallic powders for AM market by ultrasonic atomization method
Martin Bielik
- Co-author in Integration of cooling channels in additive manufactured parts using PMD® (Plasma Metal Deposition)
Sabine Bodner
- Author in The influence of laser scanning strategies on the crystallographic texture evolution and mechanical properties of LB-PBF 316L
Marie-Noemi Bold
- Author in Influence of Laser Metal Deposition Process Parameters on Geometric Accuracy and Residual Stresses of IN718 Thin-Walled Structures
- Author in Investigation of Cooling Rate and Microstructure with the Aim of Alloy Development using Extreme High Speed Laser Material Deposition (EHLA) exemplified by 316L
Etienne Bonnaud (SWERIM)
- Author in Powder bed fusion additive manufacturing - comparison of different process simulation methods
Eugen Boos
- Co-author in Topology optimized unit cells for laser powder bed fusion
Anderson Borille (Instituto Tecnológico de Aeronáutica)
- Author in Residual stress heterogeneity along the SLM POST-Processing chain of the carburizing steel 20MnCr5 after stress relief
Paolo Bosetti (University of Trento)
- Co-author in Microstructure and heat treatment of a ultrahigh strength Maraging steel fabricated by Direct laser metal deposition
Florian Brumbauer
- Co-author in Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system
Tobias Brune
- Author in Intelligent powder production: Data-driven optimization of productivity
Marco Bruns
- Co-author in Topology optimized unit cells for laser powder bed fusion
Fraser Buchanan (Queen's University Belfast)
- Co-author in Laser Powder Bed Fusion of bioresorbable Magnesium-Rare Earth alloy for orthopaedic application: A parameter study including a novel tensile scaffold design
Ricardo Buzolin
- Co-author in Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system
Jeppe Byskov (Danish Technological Institute )
- Author in Creating Competitive Metal AM Production with High Volume and Flexibility Based on Digital Twins
Riccardo Casati
- Co-author in Effect of post-processing thermal treatments on fatigue resistance of additively manufactured 18Ni300 maraging steel
Philippe Castany
- Co-author in Effect of cold rolling on the microstructure and the mechanical properties of 316L stainless steel parts produced by Laser Powder Bed Fusion
GUY CHEYMOL
- Co-author in Integration of optical fibers in parts resulting from additive metal fabrication processes
Thomas Christiansen (Technical University of Denmark (DTU), Department of Mechanical Engineering)
- Author in New high strength and corrosion resistant stainless steels by AM via modification of feedstock powders
Juergen Cornelius
- Author in A Novel Vacuum Inert Gas Atomization System enters the Market – Design, Experience and Outlook
Herbert Danninger (Technische Universität Wien)
- Co-author in Investigation of the Impact of Powder Shape on Spreading Dense Layers Using the Spreading Tester
Erik Dartfeldt (RISE)
- Author in Prediction of residual stress development and subsequent springback deformation for the laser powder bed fusion process using multiple modelling strategies and a comprehensive validation framework
Paul A Davies
- Co-author in Effect of post-processing thermal treatments on fatigue resistance of additively manufactured 18Ni300 maraging steel
Faraz deirmina
- Author in Effect of post-processing thermal treatments on fatigue resistance of additively manufactured 18Ni300 maraging steel
- Author in Microstructure and heat treatment of a ultrahigh strength Maraging steel fabricated by Direct laser metal deposition
Timothée Delacroix
- Author in Influence of powder recycling on the feedstock attributes and the final properties of SS316L components processed by L-PBF
Martin Dopler
- Author in Energy efficient production of spherical powders for DMLS Applications
Welf-Guntram Drossel
- Co-author in Topology optimized unit cells for laser powder bed fusion
Jürgen Eckert (Erich Schmid Institute of Materials Science)
- Co-author in 3D printing of amorphous metals, challenges and opportunities
Beatrix Elsner
- Author in Topology optimized unit cells for laser powder bed fusion
Strandh Emil
- Co-author in Evolution of microstructure and properties after heat treatment and HIP of E-PBF cold work tool steel
Alper Evirgen
- Co-author in Cracking behavior of a Zr-Blended Al-Zn-Mg alloy processed by powder bed fusion of metals using a laser beam under different process gas mixtures
Leandro Feitosa
- Author in Microstructure and mechanical performance of Sandvik Osprey Inconel 625 produced via laser powder bed fusion
Gunnel Fredriksson
- Co-author in Evolution of microstructure and properties after heat treatment and HIP of E-PBF cold work tool steel
Francesco Galbusera (Politecnico di Milano)
- Co-author in Potential causes for cracking of a laser powder bed fused carbon-free FeCoMo alloy
Jean-Paul Garandet
- Co-author in Influence of powder recycling on the feedstock attributes and the final properties of SS316L components processed by L-PBF
Johannes Gardstam
- Co-author in Optimized HIP and Heat Treatment for Fatigue Strength of Additively Manufactured Ti6Al4V
Marco Gehrig
- Co-author in Optimized HIP and Heat Treatment for Fatigue Strength of Additively Manufactured Ti6Al4V
Christian Gierl-Mayer (Technische Universität Wien)
- Co-author in Investigation of the Impact of Powder Shape on Spreading Dense Layers Using the Spreading Tester
Pierre-François Giroux
- Co-author in Effect of cold rolling on the microstructure and the mechanical properties of 316L stainless steel parts produced by Laser Powder Bed Fusion
Ali Gökhan Demir (Politecnico di Milano)
- Co-author in Potential causes for cracking of a laser powder bed fused carbon-free FeCoMo alloy
Rudolf Gradinger
- Author in Integration of electrical conductors into metallic structures by DED technologies
Witalij Gridin
- Co-author in On the additive processing of a premium tool steel using high temperature systems: An holistic discussion on challenges and potentials
Krzysztof Grzelak
- Co-author in Manufacturing of metallic powders for AM market by ultrasonic atomization method
Harald Gschiel (FOTEC)
- Co-author in Investigation of the Impact of Powder Shape on Spreading Dense Layers Using the Spreading Tester
Reinhold Gschwandtner
- Co-author in Thermomechanical and thermochemical endurance of hot work tool steels and PVD-coatings for high pressure die casting
Christian Haase
- Co-author in Computational design of high γ′ nickel-based superalloys for laser powder bed fusion
Sepide Hadibeik (Austrian Academy of Sciences (ÖAW))
- Author in 3D printing of amorphous metals, challenges and opportunities
Nima Haghdadi
- Co-author in Multiscale Microstructural Investigation of 17-4 PH Stainless Steel Produced by Laser Powder Bed Fusion
Uwe Haissl
- Co-author in A Novel Vacuum Inert Gas Atomization System enters the Market – Design, Experience and Outlook
Michael Härtel
- Author in HalHigh-strength and corrosion resistant by AM-New aluminium alloys for industrial 3D-printing, a contribution for sustainable manufacturing.
William Hearn (Chalmers University of Technology)
- Author in Laser Powder Bed Fusion of Carbon-Containing Ferrous Alloys: Martensite Formation and its Properties
- Co-author in LB-PBF processing limits for Cr-Mn-Mo low alloy structural steels
Radu Hendea (ZIRCON DENT SRL)
- Co-author in Mg-Zn-Zr-Ca Alloys Prepared by Mechanical Alloying for Selective Laser Melting
Olivier Hercher
- Co-author in Effect of cold rolling on the microstructure and the mechanical properties of 316L stainless steel parts produced by Laser Powder Bed Fusion
Daniel Heussen (Fraunhofer Institut für Lasertechnik ILT)
- Co-author in Improvement of part accuracy by combination of pulsed wave (pw) and continuous wave (cw) Laser Powder Bed Fusion
Andreas Hinterer
- Co-author in Integration of electrical conductors into metallic structures by DED technologies
Anders Hjermitslev (Teknologisk Institut)
- Author in Creating Competitive Metal AM Production with High Volume and Flexibility Based on Digital Twins
Kostiantyn Hlusko
- Co-author in The influence of laser scanning strategies on the crystallographic texture evolution and mechanical properties of LB-PBF 316L
Peter Hofer-Hauser
- Co-author in Thermomechanical and thermochemical endurance of hot work tool steels and PVD-coatings for high pressure die casting
Harald Holzgruber
- Co-author in A Novel Vacuum Inert Gas Atomization System enters the Market – Design, Experience and Outlook
Amir Horr
- Author in On Fatigue Analyses of Additive Manufacturing Parts: Review of Hybrid Techniques
Eduard Hryha (Chalmers University of Technology/Centre for Additive Manufacturing - Metal (CAM2))
- Author in Laser Powder Bed Fusion of Carbon-Containing Ferrous Alloys: Martensite Formation and its Properties
- Co-author in LB-PBF processing limits for Cr-Mn-Mo low alloy structural steels
Christopher Hulme-Smith
- Author in Further development and deployment of powder spreadability testing
Aziz Huskic
- Co-author in 3D printed tools to reduce residual stresses, thinning and martensite content during deep drawing of metastable austenitic steels
Steffen Ihlenfeldt
- Co-author in Topology optimized unit cells for laser powder bed fusion
Steliana Ivanescu (ZIRCON DENT SRL)
- Co-author in Mg-Zn-Zr-Ca Alloys Prepared by Mechanical Alloying for Selective Laser Melting
Henk Jansen
- Co-author in Serial production of additive manufacturing orthopedic implants using SLM and EBM.
Lucas Jauer (Fraunhofer Institute for Laser Technology ILT)
- Co-author in Improvement of part accuracy by combination of pulsed wave (pw) and continuous wave (cw) Laser Powder Bed Fusion
Meuthen John
- Co-author in Integration of cooling channels in additive manufactured parts using PMD® (Plasma Metal Deposition)
Jozef Keckes
- Co-author in The influence of laser scanning strategies on the crystallographic texture evolution and mechanical properties of LB-PBF 316L
F. Khodabakhshi (University of Waterloo, Department of Mechanical and Mechatronics Engineering)
- Co-author in 3D printing of amorphous metals, challenges and opportunities
Michael Kitzmantel
- Co-author in Integration of cooling channels in additive manufactured parts using PMD® (Plasma Metal Deposition)
Janusz Kluczyński
- Co-author in Manufacturing of metallic powders for AM market by ultrasonic atomization method
Stéphanie Kodjikian
- Co-author in Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system
Patrick Köhnen
- Author in Computational design of high γ′ nickel-based superalloys for laser powder bed fusion
Alexander Kopp (Meotec GmbH)
- Co-author in Laser Powder Bed Fusion of bioresorbable Magnesium-Rare Earth alloy for orthopaedic application: A parameter study including a novel tensile scaffold design
Pavel Krakhmalev
- Co-author in Correlative microstructure investigations of additive manufactured parts
- Co-author in Evolution of microstructure and properties after heat treatment and HIP of E-PBF cold work tool steel
Arthur Kretzer
- Author in Residual stress heterogeneity along the SLM POST-Processing chain of the carburizing steel 20MnCr5 after stress relief
Robert Krisper
- Co-author in Correlative microstructure investigations of additive manufactured parts
Thomas Laag
- Author in Improvement of part accuracy by combination of pulsed wave (pw) and continuous wave (cw) Laser Powder Bed Fusion
AYOUB LADACI
- Co-author in Integration of optical fibers in parts resulting from additive metal fabrication processes
Marie Langer (CEO, EOS GmbH)
- Author in AM on the road to serial production
Harald Leitner
- Co-author in Potential causes for cracking of a laser powder bed fused carbon-free FeCoMo alloy
Louis Lemarquis
- Author in Effect of cold rolling on the microstructure and the mechanical properties of 316L stainless steel parts produced by Laser Powder Bed Fusion
Stefan Leuders
- Author in On the additive processing of a premium tool steel using high temperature systems: An holistic discussion on challenges and potentials
Xiaozhou Liao
- Co-author in Multiscale Microstructural Investigation of 17-4 PH Stainless Steel Produced by Laser Powder Bed Fusion
Kristina Lindgren (Chalmers University of Technology)
- Co-author in Laser Powder Bed Fusion of Carbon-Containing Ferrous Alloys: Martensite Formation and its Properties
Fernando Lomello
- Co-author in Influence of powder recycling on the feedstock attributes and the final properties of SS316L components processed by L-PBF
- Co-author in Integration of optical fibers in parts resulting from additive metal fabrication processes
Samuel Lorin (Frauenhofer Chalmers Centre)
- Author in Prediction of residual stress development and subsequent springback deformation for the laser powder bed fusion process using multiple modelling strategies and a comprehensive validation framework
Michael Lutze
- Co-author in HalHigh-strength and corrosion resistant by AM-New aluminium alloys for industrial 3D-printing, a contribution for sustainable manufacturing.
Tobias Maiwald-Immer
- Co-author in HalHigh-strength and corrosion resistant by AM-New aluminium alloys for industrial 3D-printing, a contribution for sustainable manufacturing.
Savko Malinov (Queen's University Belfast)
- Co-author in Laser Powder Bed Fusion of bioresorbable Magnesium-Rare Earth alloy for orthopaedic application: A parameter study including a novel tensile scaffold design
Jose Mascheroni
- Author in Residual stress heterogeneity along the SLM POST-Processing chain of the carburizing steel 20MnCr5 after stress relief
Hicham Maskrot
- Co-author in Effect of cold rolling on the microstructure and the mechanical properties of 316L stainless steel parts produced by Laser Powder Bed Fusion
- Co-author in Influence of powder recycling on the feedstock attributes and the final properties of SS316L components processed by L-PBF
- Co-author in Integration of optical fibers in parts resulting from additive metal fabrication processes
Graham Matheson
- Co-author in Cracking behavior of a Zr-Blended Al-Zn-Mg alloy processed by powder bed fusion of metals using a laser beam under different process gas mixtures
Mustafa Megahed
- Co-author in Computational design of high γ′ nickel-based superalloys for laser powder bed fusion
Bakir Mehic (University of Applied Sciences Upper Austria)
- Author in 3D printed tools to reduce residual stresses, thinning and martensite content during deep drawing of metastable austenitic steels
Martina Meisnar (Materials & Processes Engineer, European Space Agency)
- Author in Past and future challenges for Additive Manufacturing in Space Industry
Pelle Mellin
- Co-author in Further development and deployment of powder spreadability testing
Nikolaus Milaev
- Co-author in Topology optimized unit cells for laser powder bed fusion
Stefan Mitsche
- Co-author in Correlative microstructure investigations of additive manufactured parts
Gerald Mitteramskogler
- Author in Lithography-based additive manufacturing of functional metal components
Marco Mitterlehner (TU Wien)
- Author in Investigation of the Impact of Powder Shape on Spreading Dense Layers Using the Spreading Tester
Alberto Molinari (University of Trento)
- Co-author in Microstructure and heat treatment of a ultrahigh strength Maraging steel fabricated by Direct laser metal deposition
Maxwell Moyle
- Author in Multiscale Microstructural Investigation of 17-4 PH Stainless Steel Produced by Laser Powder Bed Fusion
Venkata Karthik Nadimpalli (Technical University of Denmark)
- Author in New high strength and corrosion resistant stainless steels by AM via modification of feedstock powders
Erich Neubauer
- Author in Integration of cooling channels in additive manufactured parts using PMD® (Plasma Metal Deposition)
Anna Nocivin (Ovidius University of Constanta)
- Co-author in Mg-Zn-Zr-Ca Alloys Prepared by Mechanical Alloying for Selective Laser Melting
M. Nosko (Slovak Academy of Sciences, Institute of Materials and Machine Mechanics)
- Co-author in 3D printing of amorphous metals, challenges and opportunities
Olli Nyrhilae
- Co-author in Energy efficient production of spherical powders for DMLS Applications
Miloslav Ognianov
- Co-author in On the additive processing of a premium tool steel using high temperature systems: An holistic discussion on challenges and potentials
David Ohlsson (RISE)
- Author in Prediction of residual stress development and subsequent springback deformation for the laser powder bed fusion process using multiple modelling strategies and a comprehensive validation framework
Christos Oikonomou
- Author in Prediction of residual stress development and subsequent springback deformation for the laser powder bed fusion process using multiple modelling strategies and a comprehensive validation framework
- Co-author in Evolution of microstructure and properties after heat treatment and HIP of E-PBF cold work tool steel
Laurent Pambaguian (Materials & Processes Engineer, European Space Agency)
- Author in Past and future challenges for Additive Manufacturing in Space Industry
Bernd Panzirsch
- Co-author in Correlative microstructure investigations of additive manufactured parts
David Bue Pedersen (Technical University of Denmark)
- Author in New high strength and corrosion resistant stainless steels by AM via modification of feedstock powders
Tanja Pfeifer (Pankl Racing Systems)
- Author in HalHigh-strength and corrosion resistant by AM-New aluminium alloys for industrial 3D-printing, a contribution for sustainable manufacturing.
Jan Platl
- Author in Potential causes for cracking of a laser powder bed fused carbon-free FeCoMo alloy
Laurenz Plöchl
- Co-author in Optimized HIP and Heat Treatment for Fatigue Strength of Additively Manufactured Ti6Al4V
QUENTIN POUILLE
- Author in Integration of optical fibers in parts resulting from additive metal fabrication processes
Barbara Previtali (Politecnico di Milano)
- Co-author in Potential causes for cracking of a laser powder bed fused carbon-free FeCoMo alloy
Sophie Primig
- Author in The role of interfaces during metal additive manufacturing
- Co-author in Multiscale Microstructural Investigation of 17-4 PH Stainless Steel Produced by Laser Powder Bed Fusion
Doina Raducanu (University Politehnica of Bucharest)
- Author in Mg-Zn-Zr-Ca Alloys Prepared by Mechanical Alloying for Selective Laser Melting
Daniel Rainer
- Co-author in Potential causes for cracking of a laser powder bed fused carbon-free FeCoMo alloy
Ronnie Rego (Instituto Tecnológico de Aeronáutica)
- Author in Residual stress heterogeneity along the SLM POST-Processing chain of the carburizing steel 20MnCr5 after stress relief
Florian Resch
- Co-author in The influence of laser scanning strategies on the crystallographic texture evolution and mechanical properties of LB-PBF 316L
Simon Ringer
- Co-author in Multiscale Microstructural Investigation of 17-4 PH Stainless Steel Produced by Laser Powder Bed Fusion
Sophie Rivoirard
- Co-author in Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system
Lucas Robatto (Instituto Tecnológico de Aeronáutica)
- Author in Residual stress heterogeneity along the SLM POST-Processing chain of the carburizing steel 20MnCr5 after stress relief
Jasmin Saewe (Fraunhofer Institut für Lasertechnik)
- Author in Processing elemental powder blends with miniaturized process chamber designed for material development with laser powder bed fusion
Guilherme Santos (Instituto Tecnológico de Aeronáutica)
- Author in Residual stress heterogeneity along the SLM POST-Processing chain of the carburizing steel 20MnCr5 after stress relief
Norbert Schell
- Co-author in The influence of laser scanning strategies on the crystallographic texture evolution and mechanical properties of LB-PBF 316L
Alexander Scheriau
- Co-author in A Novel Vacuum Inert Gas Atomization System enters the Market – Design, Experience and Outlook
Johannes Henrich Schleifenbaum
- Co-author in Influence of Laser Metal Deposition Process Parameters on Geometric Accuracy and Residual Stresses of IN718 Thin-Walled Structures
- Co-author in Zinc-Magnesium Alloys for Bioresorbable Medical Implants manufactured by Laser Powder Bed Fusion
Johannes Henrich Schleifenbaum
- Co-author in Investigation of Cooling Rate and Microstructure with the Aim of Alloy Development using Extreme High Speed Laser Material Deposition (EHLA) exemplified by 316L
Martin Schnall
- Co-author in Integration of electrical conductors into metallic structures by DED technologies
Ronald Schnitzer
- Co-author in Potential causes for cracking of a laser powder bed fused carbon-free FeCoMo alloy
Hartmuth Schröttner
- Co-author in Correlative microstructure investigations of additive manufactured parts
Frédéric Schuster
- Co-author in Influence of powder recycling on the feedstock attributes and the final properties of SS316L components processed by L-PBF
Stefan Seidel (CTO, Pankl Racing Systems AG)
- Author in AM on the road to serial production
James Shipley (Quintus Technologies AB)
- Author in Optimized HIP and Heat Treatment for Fatigue Strength of Additively Manufactured Ti6Al4V
Łukasz Słoboda
- Co-author in Manufacturing of metallic powders for AM market by ultrasonic atomization method
M.H. Sohi (University of Tehran, Schooll of Metallurgy and Materials Engineering)
- Co-author in 3D printing of amorphous metals, challenges and opportunities
Marcel Somers (Technical University of Denmark)
- Author in New high strength and corrosion resistant stainless steels by AM via modification of feedstock powders
Christof Sommitsch
- Co-author in 3D printed tools to reduce residual stresses, thinning and martensite content during deep drawing of metastable austenitic steels
- Co-author in Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system
Sebastian Spalt
- Co-author in Integration of electrical conductors into metallic structures by DED technologies
F. Spieckermann (Montanuniversität Leoben, Departmen Materials Physics)
- Co-author in 3D printing of amorphous metals, challenges and opportunities
Wolfgang Sprengel
- Co-author in Development of a novel in- situ alloying 3D printing procedure exemplified on the permanent magnetic Fe-Cr-Co alloy system
Doina Stanciu (ZIRCON DENT SRL)
- Co-author in Mg-Zn-Zr-Ca Alloys Prepared by Mechanical Alloying for Selective Laser Melting
Robert Steinlechner
- Author in LB-PBF processing limits for Cr-Mn-Mo low alloy structural steels
Ian Stroud (POSTECH)
- Author in Cyber-Physically controlled Smart Additive Manufacturing system (CPSAM)
Suk-Hwan Suh (POSTECH, Research Center for Smart Factory)
- Author in Cyber-Physically controlled Smart Additive Manufacturing system (CPSAM)
Jelle ten Kate
- Author in Serial production of additive manufacturing orthopedic implants using SLM and EBM.
Juliane Thielsch
- Co-author in Topology optimized unit cells for laser powder bed fusion
Corneliu Trisca-Rusu (National Institute for Research and Development in Micro-technologies)
- Co-author in Mg-Zn-Zr-Ca Alloys Prepared by Mechanical Alloying for Selective Laser Melting
Christoph Turk
- Co-author in On the additive processing of a premium tool steel using high temperature systems: An holistic discussion on challenges and potentials
- Co-author in Potential causes for cracking of a laser powder bed fused carbon-free FeCoMo alloy
Markus Uhlirsch
- Co-author in Evolution of microstructure and properties after heat treatment and HIP of E-PBF cold work tool steel
Markus Unterrainer (MARK Metallwarenfabrik GmbH)
- Co-author in 3D printed tools to reduce residual stresses, thinning and martensite content during deep drawing of metastable austenitic steels
Emilie H. Valente (Technical University of Denmark)
- Author in New high strength and corrosion resistant stainless steels by AM via modification of feedstock powders
Kerstin Van Gaalen (National University of Ireland Galway)
- Co-author in Laser Powder Bed Fusion of bioresorbable Magnesium-Rare Earth alloy for orthopaedic application: A parameter study including a novel tensile scaffold design
A.M. Villardel
- Co-author in Correlative microstructure investigations of additive manufactured parts
Maximilian Voshage
- Author in Zinc-Magnesium Alloys for Bioresorbable Medical Implants manufactured by Laser Powder Bed Fusion
- Co-author in Influence of Laser Metal Deposition Process Parameters on Geometric Accuracy and Residual Stresses of IN718 Thin-Walled Structures
- Co-author in Investigation of Cooling Rate and Microstructure with the Aim of Alloy Development using Extreme High Speed Laser Material Deposition (EHLA) exemplified by 316L
Manuel Walter
- Co-author in Process gas and its influence on additive manufactured AlSi10Mg
Armin Wiedenegger
- Co-author in On the additive processing of a premium tool steel using high temperature systems: An holistic discussion on challenges and potentials
Yannik Wilkens
- Author in Intelligent powder production: Data-driven optimization of productivity
Andreas Wimmer
- Co-author in Cracking behavior of a Zr-Blended Al-Zn-Mg alloy processed by powder bed fusion of metals using a laser beam under different process gas mixtures
Till Martin Winkel (Fraunhofer Institute for Laser Technology ILT, Germany)
- Co-author in Improvement of part accuracy by combination of pulsed wave (pw) and continuous wave (cw) Laser Powder Bed Fusion
Bruno Wolff
- Author in Residual stress heterogeneity along the SLM POST-Processing chain of the carburizing steel 20MnCr5 after stress relief
Liang Wu
- Co-author in On the additive processing of a premium tool steel using high temperature systems: An holistic discussion on challenges and potentials
I. Yadroitsava (Central University of Technology)
- Co-author in Correlative microstructure investigations of additive manufactured parts
I. Yadroitsev (Central University of Technology)
- Co-author in Correlative microstructure investigations of additive manufactured parts
Michael F. Zaeh
- Co-author in Cracking behavior of a Zr-Blended Al-Zn-Mg alloy processed by powder bed fusion of metals using a laser beam under different process gas mixtures
Nikolai Zaepernik (Senior Vice President Life Cycle Solutions Management - EOS)
- Author in AM on the road to serial production
Michał Zalewski
- Co-author in Manufacturing of metallic powders for AM market by ultrasonic atomization method