Name: 7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016
Start: 2016-09-12T08:00:00+02:00
End: 2016-09-14T18:40:00+02:00
Location: No location set

THOMAS ABFALTERER (voestalpine Stahl GmbH)

Author in OPTIMIZATION OF COAL PREPARATION PLANT IN LINZ

PETER ADRICHEM (Danieli Corus BV)

Author in INSTALLATION, COMMISSIONING AND RAMP-UP OF THE NEW PULVERIZED COAL INJECTION SYSTEM AT ARCELORMITTAL KRYVYI RIH BLAST FURNACE NO. 9

KUMAR SHUKLA AJAY (Indian Institute of Technology Madras)

Co-author in PHYSICAL MODELLING BASED ANALYSIS OF DRY SLAG GRANULATION

JOHANNA ALATALO (LKAB, R & D, Lulea)

Co-author in IMPACT ON COMBUSTION CONDITIONS FROM TUYERE INJECTION SETTINGS

ALOIS ALTENDORFER (Primetals Technologies Austria GmbH)

Co-author in DRIpax™ – THE NEW GENERATION OF DR PLANT PROCESS OPTIMIZATION

RAJESH Anand (JSW steel Ltd)

Co-author in ENHANCING THE PRODUCTIVITY OF LARGE BLAST FURNACES AT HIGH SLAG RATES

KIRILL ANDREEV (Tata Steel Europe)

Author in REFRACTORIES FOR COKE OVEN WALL - OPERATOR'S PERSPECTIVE

MASOUD ASKARI (Sharif University of Technology, Tehran)

Co-author in EFFECT OF HEATING RATE ON THE PROPERTIES OF TWO NONCOKING COALS USED IN TUNNEL KILN DIRECT REDUCTION OF IRON PROCESS

TODD ASTORIA (Midrex Technologies)

Co-author in APPLICATION OF MIDREX TECHNOLOGIES IN INTEGRATED STEEL PLANTS; POSSIBLE REDUCTION OF ENVIRONMENTAL IMPACT AND OPEX

P. AUSTIN (BlueScope Steel)

Co-author in SINTER – NUT COKE INTERACTION AND BEHAVIOUR DURING CONVEYOR BELT TRANSPORTATION AND DISCHARGE: A DEM STUDY

ALEXANDER BABICH (RWTH Aachen University)

Co-author in TOWARDS PREDICTION OF COAL CONVERSION BEHAVIOUR IN THE BLAST FURNACE

BING BAI

Co-author in PELLETIZATION OF MALAYSIA MAGNETITE CONCENTRATES AND ITS PROPERTIES OF GAS-BASED DIRECT REDUCTION

PHILIPP BERMES (PAUL WURTH S.A.)

Co-author in CHARGING PRACTICE OF BLAST FURNACE OPERATED WITH 100% ACID PELLETS

DIETER BETTINGER (Primetals Technologies Austria GmbH)

Author in BLAST FURNACE PROCESS OPTIMIZATION WITH CLOSED-LOOP EXPERT SYSTEMS – 25 YEARS OF EXPERIENCE

DIETER BETTINGER (PRIMETALS Technology GmbH)

Co-author in AUTOMATIC SAMPLING AND ANALYSIS OF GRANULATED SINTER FEED

ANRIN BHATTACHARYYA (Montanuniversitaet Leoben)

Author in EXPERIMENTAL SIMULATION OF THE INTERACTION OF SLAG AND HOT METAL WITH COKE AT THE BOSH REGION OF BLAST FURNACE

M. BIASUTTI (BlueScope Steel)

Co-author in SINTER – NUT COKE INTERACTION AND BEHAVIOUR DURING CONVEYOR BELT TRANSPORTATION AND DISCHARGE: A DEM STUDY

BO BJÖRKMAN (Luleå University of Technology)

Co-author in LOW CO2 IRONMAKING IN THE BLAST FURNACE

ADAM BLACKMORE (Hatch Ltd.)

Co-author in HELPING TO ADDRESS ENVIRONMENTAL CONTROL IN IRON ORE PROCESSING, IRON MAKING, AND COKE HANDLING OPERATIONS THROUGH THE USE OF COMPUTATIONAL FLUID DYNAMICS (CFD)

MICHAELA BOEBERL (Primetals Technologies Austria GmbH)

Author in EFFICIENT SINTER COOLING WITH OPTIMIZED ENERGY RECOVERY, ENERGY SAVING AND EMISSION REDUCTION

CHRISTIAN BOEHM (Primetals Technologies Austria GmbH)

Co-author in COMPARING THE CO2 EMISSIONS OF DIFFERENT IRONMAKING ROUTES

CRISTIAN BÖHM (Primetals Technologies Austria GmbH)

Author in COREX® - AN ALTERNATIVE FOR HOT METAL PRODUCTION IN A CHALLENGING ENVIRONMENT

BORIS BOKOVIKOV (Torex)

Author in ANALYSIS OF NONSTATIONARY TRANSIENT PROCESSES IN BLAST FURNACE

JÖRG BRINCKMANN (PAUL WURTH S.A.)

Co-author in NEW BLAST FURNACE OPERATION PROSPECTS WITH THE G3 CHUTE TRANSMISSION GEARBOX

THOMAS BUERGLER (voestalpine Stahl GmbH)

Author in DIRECT REDUCTION TECHNOLOGY AS A FLEXIBLE TOOL TO REDUCE THE CO2 INTENSITY OF IRON AND STEELMAKING

JOHN BUSSER (Hatch Ltd.)

Author in BLAST FURNACE RELINE IMPLEMENTATION STRATEGY

RICCARDO CALCAGNO

Co-author in COKE DRY QUENCHING: A SOLUTION FOR ENVIRONMENTAL CONTROL AND ENERGY SAVING

IAN CAMERON (Hatch Ltd)

Co-author in THE USE OF PLASMA TORCHES IN BLAST FURNACE IRONMAKING

IAN CAMERON

Co-author in BLAST FURNACE RELINE IMPLEMENTATION STRATEGY

UJJAL CHAKRABORTY (PELLET PLANT TATA STEEL JAMSHEDPUR)

Co-author in EFFECT OF FLUXING AGENTS ON THE QUALITY AND MICROSTRUCTURE OF HEMATITE PELLETS

LEE CHANG HYUNG (POSCO, Pohang, Korea)

Co-author in THE STUDY OF CORE-BORED TAPHOLE CLAY USED IN FINEX

YUN CHEN (Chongqing University)

Co-author in EFFECT OF SILICA ON THE REDUCTION KINETICS OF CaO-Fe2O3-SiO2 SYSTEM

S.J. Chew (BlueScope Steel)

Co-author in SINTER – NUT COKE INTERACTION AND BEHAVIOUR DURING CONVEYOR BELT TRANSPORTATION AND DISCHARGE: A DEM STUDY

SHENG J. CHEW (BlueScope Iron & Steelmaking Technology)

Co-author in CHARACTERISATION OF STEELPLANT BY-PRODUCTS TO REALISE THE VALUE OF FE AND ZN

DESIDE CHIBWE (University of Newcastle)

Author in SINTER – NUT COKE INTERACTION AND BEHAVIOUR DURING CONVEYOR BELT TRANSPORTATION AND DISCHARGE: A DEM STUDY

KYLE CHOMYN (Hatch Ltd., Canada)

Co-author in STRUCTURAL ASSESSMENT OF BLAST FURNACE HEARTH REFRACTORY SYSTEM

KYLE CHOMYN (Hatch Ltd)

Author in BLAST FURNACE HEARTH ASSESSMENT BY COMBINING AU-E AND THERMOCOUPLE DATA

AZRIN A. CHOWDHURY (School of Mechanical, Materials Mechatronics and Steel Research Hub, University of Wollongong)

Co-author in THE EFFECT OF BINARY AND TENARY MINERAL COMBINATIONS ON THE REACTIVITY OF A COKE ANALOGUE

HO CHUNG-KEN (China Steel Corporation)

Co-author in DEVELOPMENT OF SLAG FLUIDITY PREDICTION SYSTEM AND ITS APPLICATION FOR BLAST FURNACE

ROBSON JACINTO COELHO

Co-author in PID COMBUSTION – DEDICATED CONTROL FOR AIR ADMISSION IN A HEAT RECOVERY COKE OVEN AT TKCSA

NEDA DARIVANDI (Hatch Ltd., Canada)

Co-author in STRUCTURAL ASSESSMENT OF BLAST FURNACE HEARTH REFRACTORY SYSTEM

BIDYUT DAS (Tata Steel)

Co-author in APPLICATION OF ORGANIC POLYMER IN COKE MAKING- TATA STEEL SCENARIO

P. S. DASH (Tata Steel)

Co-author in APPLICATION OF ORGANIC POLYMER IN COKE MAKING- TATA STEEL SCENARIO

ROWAN DAVIDSON

Co-author in EXAMINATION OF COKE REACTIVITY USING MICRO-CT ANALYSIS

LUIZ AFONSO DE ANDRADE

Co-author in PID COMBUSTION – DEDICATED CONTROL FOR AIR ADMISSION IN A HEAT RECOVERY COKE OVEN AT TKCSA

ALEX DEEV

Co-author in EXAMINATION OF COKE REACTIVITY USING MICRO-CT ANALYSIS

SVETLANA DELIAMURE (Danieli Corus BV)

Co-author in INSTALLATION, COMMISSIONING AND RAMP-UP OF THE NEW PULVERIZED COAL INJECTION SYSTEM AT ARCELORMITTAL KRYVYI RIH BLAST FURNACE NO. 9

ULISSES DE OLIVEIRA PINTO

Co-author in PID COMBUSTION – DEDICATED CONTROL FOR AIR ADMISSION IN A HEAT RECOVERY COKE OVEN AT TKCSA

GLAUBER DE SOUSA DE ARAUJO

Co-author in PID COMBUSTION – DEDICATED CONTROL FOR AIR ADMISSION IN A HEAT RECOVERY COKE OVEN AT TKCSA

SANDRO DE SOUZA AZEVEDO

Co-author in PID COMBUSTION – DEDICATED CONTROL FOR AIR ADMISSION IN A HEAT RECOVERY COKE OVEN AT TKCSA

CHENGYI DING (Chongqing University)

Author in EFFECT OF SILICA ON THE REDUCTION KINETICS OF CaO-Fe2O3-SiO2 SYSTEM

ALEKSANDR DMITRIEV (Cherepovets Metallurgical Combine – Severstal)

Co-author in CAREFUL CONTROL OF REFRACTORY LINING CONDITIONS ENSURES PROLONGED CAMPAIGN OF BLAST FURNACE

YUSUKE DOHI (Steel Research Laboratory, JFE Steel Corp.,)

Author in NEW THEORY OF COAL BLENDING BASED ON NOVEL THERMOPLASTICITY MEASUREMENT; PERMEATION DISTANCE

CHOI DO MUN (CHOSUN REFRACTORIES, Co., Ltd)

Co-author in THE STUDY OF CORE-BORED TAPHOLE CLAY USED IN FINEX

JASON DONNELLY

Co-author in EXAMINATION OF COKE REACTIVITY USING MICRO-CT ANALYSIS

EUGENE DONSKOI (CSIRO Mineral Resources)

Author in MINERAL4/RECOGNITION4: A UNIVERSAL OPTICAL IMAGE ANALYSIS PACKAGE FOR IRON ORE, SINTER AND COKE CHARACTERIZATION

SRINIVAS DWARAPUDI (R&D TATA STEEL JAMSHEDPUR INDIA)

Author in EFFECT OF FLUXING AGENTS ON THE QUALITY AND MICROSTRUCTURE OF HEMATITE PELLETS

CHARLES HUMBERTO EFFGEN WERNESBACH

Co-author in PID COMBUSTION – DEDICATED CONTROL FOR AIR ADMISSION IN A HEAT RECOVERY COKE OVEN AT TKCSA

ELSAYEDMOUSA (Swerea MEFOS, Process Integration Department)

Co-author in IRON ORE PELLET REDUCTION BEHAVIOR IN POTENTIAL LOW CO2 BLAST FURNACE SCENARIOS

EDO ENGEL (Danieli Corus BV)

Co-author in BLAST FURNACE OPERATION IN ROUGH TIMES
Co-author in INSTALLATION, COMMISSIONING AND RAMP-UP OF THE NEW PULVERIZED COAL INJECTION SYSTEM AT ARCELORMITTAL KRYVYI RIH BLAST FURNACE NO. 9
Co-author in LATEST DEVELOPMENT IN DRY AND WET BLAST FURNACE GAS CLEANING TECHNOLOGY

ANTONIO ESPOSITO

Author in COKE DRY QUENCHING: A SOLUTION FOR ENVIRONMENTAL CONTROL AND ENERGY SAVING

G.M. EVANS (University of Newcastle)

Co-author in SINTER – NUT COKE INTERACTION AND BEHAVIOUR DURING CONVEYOR BELT TRANSPORTATION AND DISCHARGE: A DEM STUDY

WOUTER EWALTS (Danieli Corus BV)

Co-author in LATEST DEVELOPMENT IN DRY AND WET BLAST FURNACE GAS CLEANING TECHNOLOGY

ANDREA FABBRI

Co-author in COKE DRY QUENCHING: A SOLUTION FOR ENVIRONMENTAL CONTROL AND ENERGY SAVING

TIMO FABRITIUS (University of Oulu)

Co-author in EFFECT OF HEATING RATE ON THE PROPERTIES OF TWO NONCOKING COALS USED IN TUNNEL KILN DIRECT REDUCTION OF IRON PROCESS

TIMO FABRITIUS (Process Metallurgy Research Unit)

Co-author in IRON ORE PELLET REDUCTION BEHAVIOR IN POTENTIAL LOW CO2 BLAST FURNACE SCENARIOS

MICHAEL FALLER (PRIMETALS Technology GmbH)

Author in SIMULATION BASED PELLET-PLANT DESIGN

EDMUND FEHRINGER (Primetals Technologies Austria GmbH)

Co-author in EFFICIENT SINTER COOLING WITH OPTIMIZED ENERGY RECOVERY, ENERGY SAVING AND EMISSION REDUCTION

CHRISTOPH FEILMAYR (voestalpine Stahl GmbH)

Co-author in THE LONG WAY TO PCI IN LINZ – FIRST OPERATION EXPERIENCE

CHRISTOPH FEILMAYR (voestalpine Stahl Gmbh)

Author in INNOVATIVE TOOLS FOR PROCESS OPTIMIZATION – BURDEN SURFACE SCANNING VIA BEAMFORMING RADAR AND MEASUREMENT OF THE TOP GAS TEMPERATURE DISTRIBUTION

SHUAI FENG (Hebei Iron & Steel Group)

Co-author in EFFECTS OF MGO ON THE SINTERING LIQUID, THE PROPERTIES AND MINERALOGICAL MORPHOLOGY OF THE HIGH-BASICITY SINTER

YAN SAMUEL FERREIRA JUNQUEIRA (Thyssenkrupp CSA, Brazil)

Author in PID COMBUSTION – DEDICATED CONTROL FOR AIR ADMISSION IN A HEAT RECOVERY COKE OVEN AT TKCSA

S.V. Filatov (NLMK, Novolipetsk Steel, Lipetsk, Russia)

Author in IDEAL BLAST FURNACE PROCESS

SERGEI FILATOV (Novo-Lipetsk metallurgical combine)

Co-author in ENERGY EFFICIENT TECHNOLOGY TO PRODUCE HOT METAL FROM TITANIA-MAGNETITE ORE

S.V. FILATOV (NLMK, Novolipetsk Steel, Lipetsk, Russia)

Author in RESERVES FOR RAISING THE EFFICIENCY OF BLAST FURNACE PROCESS

VALENTIN FILIPPOV (Nizhne-Tagilskiy metallurgical combine)

Co-author in ENERGY EFFICIENT TECHNOLOGY TO PRODUCE HOT METAL FROM TITANIA-MAGNETITE ORE

ANDREAS FILZWIESER (Mettop GmbH)

Co-author in ILTEC - METTOP´S REVOLUTIONARY COOLING SOLUTION FOR THE STEEL INDUSTRY

IRIS FILZWIESER (Mettop GmbH)

Co-author in ILTEC - METTOP´S REVOLUTIONARY COOLING SOLUTION FOR THE STEEL INDUSTRY

DAVE FISHER (BRITISH STEEL)

Author in THE HIGHS AND LOWS OF THE FOURTH CAMPAIGN OF REDCAR BLAST FURNACE, SSI UK, APRIL 2012 – SEPTEMBER 2015

ALEXANDER FLEISCHANDERL (Primetals Technologies Austria GmbH)

Author in THE CIRCULAR ECONOMY: CARBON RECYCLING AND THE IRON INDUSTRY

ALEXANDER FLEISCHANDERL (Primetals Technologies, Austria GmbH)

Co-author in DRY BLAST FURNACE SLAG GRANULATION WITH WASTE HEAT RECOVERY

JEREMY FLETCHER (Primetals Technologies)

Co-author in BLAST FURNACE COOLING STAVE DESIGN

JANA FRANK (RWTH Aachen University)

Co-author in TOWARDS PREDICTION OF COAL CONVERSION BEHAVIOUR IN THE BLAST FURNACE

HARALD FRITSCHEK (Primetals Technologies Austria GmbH)

Co-author in BLAST FURNACE PROCESS OPTIMIZATION WITH CLOSED-LOOP EXPERT SYSTEMS – 25 YEARS OF EXPERIENCE

LARS-ERIK FROM (Swerea MEFOS AB)

Co-author in IMPACT ON COMBUSTION CONDITIONS FROM TUYERE INJECTION SETTINGS

KIYOSHI FUKADA (Steel Research Laboratory, JFE Steel Corp.,)

Co-author in NEW THEORY OF COAL BLENDING BASED ON NOVEL THERMOPLASTICITY MEASUREMENT; PERMEATION DISTANCE

KIYOSHI FUKADA (JFE Steel Corporation)

Co-author in EFFECT OF SMALL COKE RATE ON CONSUMPTION BEHAVIOR OF SMALL COKE IN BLAST FURNACE

VERA GANGLBERGER (voestalpine Stahl Gmbh)

Co-author in INNOVATIVE TOOLS FOR PROCESS OPTIMIZATION – BURDEN SURFACE SCANNING VIA BEAMFORMING RADAR AND MEASUREMENT OF THE TOP GAS TEMPERATURE DISTRIBUTION

BIN GAO (University of Science and Technology Beijing)

Co-author in ADSORPTION CHARACTER OF SINTER ORE ON POTASSIUM VAPOR
Co-author in STUDY THE INFLUENCE MECHANISM OF POTASSIUM VAPOUR ON SINTER REDUCTION

HAMID GHORBANI (Hatch Ltd)

Co-author in BLAST FURNACE HEARTH ASSESSMENT BY COMBINING AU-E AND THERMOCOUPLE DATA

HAMID GHORBANI (Hatch Ltd., Canada)

Co-author in STRUCTURAL ASSESSMENT OF BLAST FURNACE HEARTH REFRACTORY SYSTEM

LARISA GILEVA (Ural Federal University (URFU))

Co-author in ENERGY EFFICIENT TECHNOLOGY TO PRODUCE HOT METAL FROM TITANIA-MAGNETITE ORE

YAKOV GORDON (Hatch Ltd.)

YAKOV GORDON

Co-author in BLAST FURNACE RELINE IMPLEMENTATION STRATEGY

ALEX GORODETSKY (Alter NRG Corp)

Co-author in THE USE OF PLASMA TORCHES IN BLAST FURNACE IRONMAKING

MAKOTO GOTO (Nippon Steel & Sumikin Engineering CO., LTD.)

Author in LONG LIFE COPPER STAVE FOR BLAST FURNACE OF NIPPON STEEL & SUMIKIN ENGINEERING

MIHAELA GRIGORE

Co-author in APPLICATION OF SMALL ANGLE NEUTRON SCATTERING TO UNDERSTAND NANOPOROSITY OF COKES

ZHENGQI GUO

Co-author in A STUDY ON THE METALLIZING SINTERING OF PELLETS OF IN-PLANT IRON-BEARING DUST AND MUD

SUSHIL GUPTA (School of Materials Science and Engineering)

Co-author in CHARACTERISATION OF FRACTURE MECHANISMS IN A BLAST FURNACE COKE

DURGESH R. GUPTA (Qatar Steel Company)

Co-author in DRIpax™ – THE NEW GENERATION OF DR PLANT PROCESS OPTIMIZATION

IGOR GURIN (Ural Federal University (URFU))

Co-author in OPTIMAL DISTRIBUTION OF SUPPLEMENTAL FUEL AND OXYGEN AMONGST FURNACES IN BLAST FURNACE SHOP

JUHO HAAPAKANGAS (Process Metallurgy Research Unit)

Co-author in IRON ORE PELLET REDUCTION BEHAVIOR IN POTENTIAL LOW CO2 BLAST FURNACE SCENARIOS

MARTINA HANEL (Mettop GmbH)

Author in ILTEC - METTOP´S REVOLUTIONARY COOLING SOLUTION FOR THE STEEL INDUSTRY

CHANG HAO-HSUN (NCKU, Department of Materials Science and Engineering)

Author in EFFECT OF VOLATILE MATTER OF COAL ON VOLUME CHANGE AND REDUCTION OF IRON ORE/COAL COMPOSITE PELLETS

SARATH HAPUGODA (CSIRO)

Co-author in MINERAL4/RECOGNITION4: A UNIVERSAL OPTICAL IMAGE ANALYSIS PACKAGE FOR IRON ORE, SINTER AND COKE CHARACTERIZATION

PRIYANTHI HAPUGODA (CSIRO)

Author in OBTAINING DETAILED MINERAL AND MINERAL/MACERAL ASSOCIATION INFORMATION IN COKE OVEN FEED COAL SAMPLES BY OPTICAL IMAGE ANALYSIS

WALTER HARTIG (DILLINGER, AG der Dillinger Hüttenwerke)

Co-author in DEVELOPMENT AND IMPLEMENTATION OF NEW MEASURING AND MONITORING SYSTEMS TO SUPPORT BF CONTROL

RICHARD HARVEY (Primetals Technologies)

Co-author in BLAST FURNACE COOLING STAVE DESIGN

LIONEL HAUSEMER (PAUL WURTH S.A.)

Co-author in CHARGING PRACTICE OF BLAST FURNACE OPERATED WITH 100% ACID PELLETS

FRANZ HAUZENBERGER (Primetals Technologies Austria GmbH)

Co-author in ANALYSIS OF THE ALKALI DISTRIBUTION IN IRONMAKING REACTORS BY THERMOCHEMICAL MODELLING

GERALD HEBENSTREIT (RHI AG)

Co-author in NEW TYPE OF PARTITION WALLS IN A PELLETIZING PLANT: A THERMO MECHANICAL ANALYSIS

NEUSSIAS INOCÊNCIO HENRIQUE

Co-author in PID COMBUSTION – DEDICATED CONTROL FOR AIR ADMISSION IN A HEAT RECOVERY COKE OVEN AT TKCSA

JOSEF HERZMAIER (Rail Cargo Logistics - Austria GmbH)

Co-author in INNOFREIGHT CONTAINER SYSTEMS - A NEW STANDARD IN RAILWAY TRANSPORT FOR VOESTALPINE

BERNHARD HIEBL (PRIMETALS Technology GmbH)

Co-author in SIMULATION BASED PELLET-PLANT DESIGN

TAKAHIDE HIGUCHI (JFE Steel Corporation)

Author in EFFECT OF IRON ORE CHARACTERISTICS ON THE WATER –IRON ORE INTERACTION

ROBIN HINK (Danieli Corus BV)

Co-author in LATEST DEVELOPMENT IN DRY AND WET BLAST FURNACE GAS CLEANING TECHNOLOGY

TOSHIYUKI HIROSAWA (JFE Steel Corporation)

Author in COMBINED INJECTION TECHNOLOGY OF GAS FUEL AND OXYGEN IN IRON ORE SINTERING PROCESS

HAI THONG HO (RWTH Aachen University)

Author in TOWARDS PREDICTION OF COAL CONVERSION BEHAVIOUR IN THE BLAST FURNACE

KIM HOCKINGS (BHP Billiton)

Co-author in APPLICATION OF I600 FROM THE CSR TEST AS A MEASURE OF PILOT OVEN COKE STRENGTH

KIM HOCKINGS (Coal Technical Marketing, BHP Billiton)

Co-author in THE EFFECT OF BINARY AND TENARY MINERAL COMBINATIONS ON THE REACTIVITY OF A COKE ANALOGUE

MATHIAS HOFFMANN (Paul Wurth S.A.)

Author in TECHNOLOGIES FOR IMPROVEMENT OF SINTER PLANTS

JOSEPH HOLLMAN (PAUL WURTH S.A.)

Co-author in NEW BLAST FURNACE OPERATION PROSPECTS WITH THE G3 CHUTE TRANSMISSION GEARBOX

YUN CHEOL HONG (CHOSUN REFRACTORIES, Co., Ltd.)

Author in DEVELOPMENT OF REACTION BONDED SiC BRICK WHICH HAVE HIGH THERMALL CONDUCTIVITY FOR BLAST FURNACE

ROBERT HORWOOD (Primetals Technologies)

Co-author in BLAST FURNACE COOLING STAVE DESIGN

XUN HU

Co-author in THE OXIDIZING PELLETIZATION OF MANGANESE ORE FINES AND ITS CONSOLIDATION MECHANISM

JIANMING HUA (BaoShan Iron and Steel Co., Ltd.)

Co-author in STUDY ON EROSION OF LARGE BLAST FURNACE HEARTH AND TECHNIQUES TO PROLONG CAMPAIGN LIFE OF HEARTH

WEIQUN HUANG

Co-author in PELLETIZATION OF MALAYSIA MAGNETITE CONCENTRATES AND ITS PROPERTIES OF GAS-BASED DIRECT REDUCTION

PAUL HUBBELING (Danieli Corus BV)

Co-author in INSTALLATION, COMMISSIONING AND RAMP-UP OF THE NEW PULVERIZED COAL INJECTION SYSTEM AT ARCELORMITTAL KRYVYI RIH BLAST FURNACE NO. 9

GREG D. HUGHES (MIDREX Technologies, Inc.)

Co-author in DRIpax™ – THE NEW GENERATION OF DR PLANT PROCESS OPTIMIZATION

BARRY HYDE

Co-author in BLAST FURNACE RELINE IMPLEMENTATION STRATEGY

ATSUSHI INAYOSHI (Nippon Steel & Sumitomo Metal Corp.)

Co-author in PREDICTION OF BURDEN DISTRIBUTION OF BLAST FURNACE BY USING DEM

CHEN IN-GANN (NCKU, Department of Materials Science and Engineering)

Co-author in EFFECT OF VOLATILE MATTER OF COAL ON VOLUME CHANGE AND REDUCTION OF IRON ORE/COAL COMPOSITE PELLETS

NATSUO ISHIWATA (JFE Steel Corporation)

Co-author in CO2 ULTIMATE REDUCTION IN STEELMAKING PROCESS (COURSE50 PROJECT)

YUKI IWAI (JFE Steel Corporation)

Co-author in EFFECT OF SMALL COKE RATE ON CONSUMPTION BEHAVIOR OF SMALL COKE IN BLAST FURNACE

YUJI IWAMI (JFE Steel Corporation)

Co-author in COMBINED INJECTION TECHNOLOGY OF GAS FUEL AND OXYGEN IN IRON ORE SINTERING PROCESS

MICHAEL JÄGER (Montanuniversitaet Leoben)

Co-author in EXPERIMENTAL SIMULATION OF THE INTERACTION OF SLAG AND HOT METAL WITH COKE AT THE BOSH REGION OF BLAST FURNACE

DAVID R. JENKINS (CSIRO)

Author in A MECHANISTIC MODEL OF THE SAPOZHNIKOV PLASTOMETER
Author in EXAMINATION OF COKE REACTIVITY USING MICRO-CT ANALYSIS

SUNKWANG JEONG (POSCO, South Korea)

Co-author in A STUDY OF THE GASEOUS REDUCTION OF MAGNETITE ORE IN A FIXED-BED REACTOR AND USING IN-SITU HIGH-TEMPER

LEE JEONG HO (POSCO, Pohang, Korea)

Co-author in THE STUDY OF CORE-BORED TAPHOLE CLAY USED IN FINEX

SHIAU JIA-SHYAN (China Steel Corporation)

Author in DEVELOPMENT OF SLAG FLUIDITY PREDICTION SYSTEM AND ITS APPLICATION FOR BLAST FURNACE

S. JIMOH (Ural Federal University (URFU))

Co-author in ENERGY EFFICIENT TECHNOLOGY TO PRODUCE HOT METAL FROM TITANIA-MAGNETITE ORE

WAYDE JOHNSON (Hatch Ltd.)

Co-author in HELPING TO ADDRESS ENVIRONMENTAL CONTROL IN IRON ORE PROCESSING, IRON MAKING, AND COKE HANDLING OPERATIONS THROUGH THE USE OF COMPUTATIONAL FLUID DYNAMICS (CFD)

PARK JONG MOON (CHOSUN REFRACTORIES, Co., Ltd)

Author in THE STUDY OF CORE-BORED TAPHOLE CLAY USED IN FINEX

SUNG-MO JUNG (GIFT/POSTECH)

Co-author in EFFECT OF COKES GASIFICATION WITH CO2 AND H2O ON THE POROSITY AND STREHGNTH IN 1100-1500°C

BIRGIT KAIN-BÜCKNER (K1-Met GmbH)

Author in QUANTIFICATION OF SINTER MINERAL PHASES WITH IMAGE PROCESSING

PRASAD KALI (Indian Institute of Technology Madras)

Author in PHYSICAL MODELLING BASED ANALYSIS OF DRY SLAG GRANULATION

HAE SEONG KANG (CHOSUN REFRACTORIES, Co., Ltd.)

Co-author in DEVELOPMENT OF REACTION BONDED SiC BRICK WHICH HAVE HIGH THERMALL CONDUCTIVITY FOR BLAST FURNACE

QING-FENG KANG (University of Science and Technology Beijing)

Co-author in EFFECTS OF MGO ON THE SINTERING LIQUID, THE PROPERTIES AND MINERALOGICAL MORPHOLOGY OF THE HIGH-BASICITY SINTER

RIKU KANNIALA (SSAB Europe)

Co-author in CHARACTERISATION OF FRACTURE MECHANISMS IN A BLAST FURNACE COKE

YURY KAPELYUSHIN (University of New South Wales)

Author in A STUDY OF THE GASEOUS REDUCTION OF MAGNETITE ORE IN A FIXED-BED REACTOR AND USING IN-SITU HIGH-TEMPER

MIKHAIL KARIMOV (Cherepovets Metallurgical Combine – Severstal)

Co-author in CAREFUL CONTROL OF REFRACTORY LINING CONDITIONS ENSURES PROLONGED CAMPAIGN OF BLAST FURNACE

EIKI KASAI (Tohoku University)

Co-author in DISINTEGRATION MECHANISM OF CALCIUM FERRITE IN SINTER BY REDUCTION

YUSUKE KASHIHARA (JFE Steel Corporation)

Author in EFFECT OF SMALL COKE RATE ON CONSUMPTION BEHAVIOR OF SMALL COKE IN BLAST FURNACE

GILLES KASS (Paul Wurth S.A.)

Co-author in TECHNOLOGIES FOR IMPROVEMENT OF SINTER PLANTS

HOLGER KASSEBAUM (Paul Wurth)

Author in MODERN DESIGN OF SINTER COOLERS

LU KE-MIAO (China steel corporation)

Co-author in EFFECT OF VOLATILE MATTER OF COAL ON VOLUME CHANGE AND REDUCTION OF IRON ORE/COAL COMPOSITE PELLETS

ANTTI KEMPPAINEN (Process Metallurgy Research Unit)

Author in IRON ORE PELLET REDUCTION BEHAVIOR IN POTENTIAL LOW CO2 BLAST FURNACE SCENARIOS

NAOKI KIKUCHI (Kobe Steel Ltd.)

Co-author in CO2 ULTIMATE REDUCTION IN STEELMAKING PROCESS (COURSE50 PROJECT)

RONALD KIM (ThyssenKrupp Industrial Solutions AG)

Co-author in DEVELOPMENT OF A VERTICAL CHAMBER COKING OVEN FOR UPGRADING LIGNITES OR SUB-BITUMINOUS COAL

ANGELIKA KLINGER (Primetals Technologies Austria GmbH)

Author in DRIpax™ – THE NEW GENERATION OF DR PLANT PROCESS OPTIMIZATION

PETER KLUT (Danieli Corus BV)

Author in LATEST DEVELOPMENT IN DRY AND WET BLAST FURNACE GAS CLEANING TECHNOLOGY

IRMELA KOFLER (K1-Met GmbH, Linz)

Co-author in ADVANCED SIGNAL PROCESSING OF TUYERE PRESSURE DATA TO DETECT REDUCED HOT WIND THROUGHPUT AND RACEWAY BLOCKAGES

IRMELA KOFLER (K1-MET GmbH)

Co-author in DIRECT REDUCTION TECHNOLOGY AS A FLEXIBLE TOOL TO REDUCE THE CO2 INTENSITY OF IRON AND STEELMAKING

YURIY KOSENKOV (Cherepovets Metallurgical Combine – Severstal)

Co-author in CAREFUL CONTROL OF REFRACTORY LINING CONDITIONS ENSURES PROLONGED CAMPAIGN OF BLAST FURNACE

LUKAS KOVAL

Co-author in APPLICATION OF SMALL ANGLE NEUTRON SCATTERING TO UNDERSTAND NANOPOROSITY OF COKES

LUKAS KOVAL (CSIRO)

Author in APPLICATION OF I600 FROM THE CSR TEST AS A MEASURE OF PILOT OVEN COKE STRENGTH

GREGOIRE KRAHENBUHL (CSIRO)

Co-author in OBTAINING DETAILED MINERAL AND MINERAL/MACERAL ASSOCIATION INFORMATION IN COKE OVEN FEED COAL SAMPLES BY OPTICAL IMAGE ANALYSIS

THOMAS KRONBERGER (Primetals Technologies Austria GmbH)

Co-author in BLAST FURNACE PROCESS OPTIMIZATION WITH CLOSED-LOOP EXPERT SYSTEMS – 25 YEARS OF EXPERIENCE

YUKIHIRO KUBOTA (Ironmaking Research Lab., Process Research Laboratories, Nippon Steel & Sumitomo Metals Corp.,)

Co-author in EFFECTS OF BRIQUETTE BLEND ON PACKING STRUCTURE OF FINE COAL PART

SUNIL KUMAR (Hatch Ltd.)

Co-author in SELECTION AND IMPLEMENTATION OF IRONMAKING TECHNOLOGY – EXPERIENCE, PRINCIPLES AND RISKS

ASHOK KUMAR (Tata Steel Limited)

Co-author in BLAST FURNACE PERFORMANCE WITH HIGHER PELLET IN BURDEN

IVAN KURUNOV (NLMK, Novolipetsk Steel, Lipetsk, Russia)

Co-author in RESERVES FOR RAISING THE EFFICIENCY OF BLAST FURNACE PROCESS

I.F. Kurunov (NLMK, Novolipetsk Steel, Lipetsk, Russia)

Co-author in IDEAL BLAST FURNACE PROCESS

BERNHARD LACKNER (voestalpine Stahl Gmbh)

Co-author in INNOVATIVE TOOLS FOR PROCESS OPTIMIZATION – BURDEN SURFACE SCANNING VIA BEAMFORMING RADAR AND MEASUREMENT OF THE TOP GAS TEMPERATURE DISTRIBUTION

PER LAGERWALL (SSAB Europe, Luleå Sweden)

Co-author in LOW CO2 IRONMAKING IN THE BLAST FURNACE

FRANCESCO LAMBARDI

Co-author in COKE DRY QUENCHING: A SOLUTION FOR ENVIRONMENTAL CONTROL AND ENERGY SAVING

OLIVER LANG (Johannes Kepler University Linz)

Co-author in ADVANCED SIGNAL PROCESSING OF TUYERE PRESSURE DATA TO DETECT REDUCED HOT WIND THROUGHPUT AND RACEWAY BLOCKAGES

JENS LASKOWSKI (Welding Alloys GmbH)

Author in PROTECTING SINTERING PLANTS – DURABILITY, SUSTAINABILITY AND EFFICIENCY IN WEAR PROTECTION

VLADISLAV LAVROV (Ural Federal University)

Co-author in ANALYSIS OF NONSTATIONARY TRANSIENT PROCESSES IN BLAST FURNACE

VLADISLAV LAVROV (Ural Federal University (URFU))

Co-author in OPTIMAL DISTRIBUTION OF SUPPLEMENTAL FUEL AND OXYGEN AMONGST FURNACES IN BLAST FURNACE SHOP

LAZLO LAZIC (University of Ljubljana)

Co-author in OPTIMAL DISTRIBUTION OF SUPPLEMENTAL FUEL AND OXYGEN AMONGST FURNACES IN BLAST FURNACE SHOP

ALEXANDER LAZOVICH (Ural Federal University (URFU))

Co-author in ENERGY EFFICIENT TECHNOLOGY TO PRODUCE HOT METAL FROM TITANIA-MAGNETITE ORE

GRACE LEE (Hatch Ltd., Canada)

Co-author in STRUCTURAL ASSESSMENT OF BLAST FURNACE HEARTH REFRACTORY SYSTEM

QIHOU LI

Co-author in A STUDY ON THE METALLIZING SINTERING OF PELLETS OF IN-PLANT IRON-BEARING DUST AND MUD

ZIYUN LI

Co-author in THE OXIDIZING PELLETIZATION OF MANGANESE ORE FINES AND ITS CONSOLIDATION MECHANISM

JIAN-PENG LI (North China University of Science and Technology)

Co-author in STUDY ON THE MECHANISM OF CEO2 AS COMBUSTION IMPROVER IN PCI

KEJIANG LI (University of Science and Technology Beijing)

Co-author in THE INFLUENCE OF ZINC VAPOR ON COMPOSITION AND PROPERTIES OF COKE

HAO LIN (University of Science and Technology Beijing)

Co-author in KINETIC ANALYSIS AND EFFECT OF BIOMASS ASH ON COMBUSTION CHARACTERISTIC OF PULVERIZED COAL

PETER LISZIO (KBS Kokereibetriebsgesellschaft Schwelgern GmbH)

Author in THE NEW GERMAN PAH-REGULATIVE INFLUENCING COKEMAKING AT SCHWELGERN PLANT

ZHENGJIAN LIU (University of Science and Technology Beijing)

Co-author in ADSORPTION CHARACTER OF SINTER ORE ON POTASSIUM VAPOR
Co-author in THE INFLUENCE OF ZINC VAPOR ON COMPOSITION AND PROPERTIES OF COKE

ZHENG-JIAN LIU (University of Science and Technology Beijing)

Co-author in EFFECTS OF MGO ON THE SINTERING LIQUID, THE PROPERTIES AND MINERALOGICAL MORPHOLOGY OF THE HIGH-BASICITY SINTER

DONG-HUI LIU (University of Science and Technology Beijing)

Co-author in EFFECTS OF MGO ON THE SINTERING LIQUID, THE PROPERTIES AND MINERALOGICAL MORPHOLOGY OF THE HIGH-BASICITY SINTER

SIYUAN LIU (University of Science and Technology Beijing)

Author in KINETIC ANALYSIS AND EFFECT OF BIOMASS ASH ON COMBUSTION CHARACTERISTIC OF PULVERIZED COAL

SIYUAN LIU (School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing)

Co-author in THE EFFECT OF BROWNCOAL ADDITION ON COKE STRENGTH

SONG LIU (North China University of Science and Technology)

Author in STUDY ON THE MECHANISM OF CEO2 AS COMBUSTION IMPROVER IN PCI

XIAO-JIE LIU (North China University of Science and Technology)

Co-author in STUDY ON THE MECHANISM OF CEO2 AS COMBUSTION IMPROVER IN PCI

HANNAH LOMAS (University of Newcastle)

Co-author in CHARACTERISATION OF FRACTURE MECHANISMS IN A BLAST FURNACE COKE

RAYMOND J. LONGBOTTOM (School of Mechanical, Materials Mechatronics and Steel Research Hub, University of Wollongong)

Author in THE EFFECT OF BINARY AND TENARY MINERAL COMBINATIONS ON THE REACTIVITY OF A COKE ANALOGUE

RAYMOND J. LONGBOTTOM (University of Wollongong)

Author in CHARACTERISATION OF STEELPLANT BY-PRODUCTS TO REALISE THE VALUE OF FE AND ZN

LIMING LU (CSIRO Mineral Resources)

Co-author in EFFECT OF IRON ORE CHARACTERISTICS ON THE WATER –IRON ORE INTERACTION

LIMING LU (CISRO MINERAL RESOURCES)

Author in RECENT ADVANCES IN UNDERSTANDING SINTERING EMISSIONS AND THEIR MITIGATION TECHNOLOGIES

HANS BODO LÜNGEN (Steel Institute VDEh, Germany)

Co-author in EVALUATION OF THE CAPABILITIES OF DIRECT AND SMELTING REDUCTION PROCESSES TO ENHANCE THE ENERGY EFFICIENCY AND TO REDUCE THE CO2 EMISSION OF THE STEEL PRODUCTION IN EUROPE

MICHAEL LUNGLMAYR (Johannes Kepler University Linz)

Co-author in ADVANCED SIGNAL PROCESSING OF TUYERE PRESSURE DATA TO DETECT REDUCED HOT WIND THROUGHPUT AND RACEWAY BLOCKAGES

XUEWEI LV (Chongqing University)

Co-author in EFFECT OF SILICA ON THE REDUCTION KINETICS OF CaO-Fe2O3-SiO2 SYSTEM

QING LV (North China University of Science and Technology)

Co-author in STUDY ON THE MECHANISM OF CEO2 AS COMBUSTION IMPROVER IN PCI

UBAYADULLAH M (JSW steel Ltd)

Co-author in ENHANCING THE PRODUCTIVITY OF LARGE BLAST FURNACES AT HIGH SLAG RATES

STEFANO MAGNANI (Paul Wurth Italia)

Co-author in APPLICATION OF MIDREX TECHNOLOGIES IN INTEGRATED STEEL PLANTS; POSSIBLE REDUCTION OF ENVIRONMENTAL IMPACT AND OPEX

MERRICK R. MAHONEY

Co-author in EXAMINATION OF COKE REACTIVITY USING MICRO-CT ANALYSIS

MERRICK R. MAHONEY (University of Newcastle, University Drive)

Co-author in THE EFFECT OF BINARY AND TENARY MINERAL COMBINATIONS ON THE REACTIVITY OF A COKE ANALOGUE

MERRICK R. MAHONEY (University of Newcastle)

Co-author in CHARACTERISATION OF FRACTURE MECHANISMS IN A BLAST FURNACE COKE

MERRICK R MAHONEY (University of Newcastle, NSW)

Co-author in A MECHANISTIC MODEL OF THE SAPOZHNIKOV PLASTOMETER

MAJID MALEKI (Hatch Ltd., Canada)

Author in STRUCTURAL ASSESSMENT OF BLAST FURNACE HEARTH REFRACTORY SYSTEM

HEINRICH MALI (Montanuniversität Leoben)

Co-author in QUANTIFICATION OF SINTER MINERAL PHASES WITH IMAGE PROCESSING

XIAOMING MAO (BaoShan Iron and Steel Co., Ltd.)

Co-author in STUDY ON EROSION OF LARGE BLAST FURNACE HEARTH AND TECHNIQUES TO PROLONG CAMPAIGN LIFE OF HEARTH

HANS ULRICH MARSCHALL (RHI AG)

Author in NEW TYPE OF PARTITION WALLS IN A PELLETIZING PLANT: A THERMO MECHANICAL ANALYSIS

JAN MARTENS (Primetals Technologies Austria GmbH)

Co-author in APPLICATION OF THE HYBRID FLOTATION IN IRON ORE - PNEUMATIC FLOTATION FOR REMOVAL OF SULFUR

JORGE MARTINEZ (Tenova HYL)

Co-author in HIGH-CARBON DRI THE FEEDING MATERIAL TO IMPROVE PERFORMANCES AND DECREASE CO2 EMISSIONS IN BOTH BF AND EAF

ALESSANDRO MARTINIS (Danieli)

Co-author in HIGH-CARBON DRI THE FEEDING MATERIAL TO IMPROVE PERFORMANCES AND DECREASE CO2 EMISSIONS IN BOTH BF AND EAF

DAISUKE MARUOKA (Tohoku University)

Co-author in DISINTEGRATION MECHANISM OF CALCIUM FERRITE IN SINTER BY REDUCTION

WATANABE MASAHIKO (Ironmaking Research Lab., Process Research Laboratories, Nippon Steel & Sumitomo Metals Corp.,)

Author in EFFECTS OF BRIQUETTE BLEND ON PACKING STRUCTURE OF FINE COAL PART

TAKASHI MATSUI (Steel Research Laboratory, JFE Steel Corp.,)

Co-author in NEW THEORY OF COAL BLENDING BASED ON NOVEL THERMOPLASTICITY MEASUREMENT; PERMEATION DISTANCE

HIDETOSHI MATSUNO (JFE Steel Corporation)

SHINROKU MATSUZAKI (Nippon Steel & Sumitomo Metal Corp.)

Co-author in PREDICTION OF BURDEN DISTRIBUTION OF BLAST FURNACE BY USING DEM

SHERIDAN MAYO

Co-author in EXAMINATION OF COKE REACTIVITY USING MICRO-CT ANALYSIS

IAN MCDONALD (Primetals Technologies UK)

Co-author in DRY BLAST FURNACE SLAG GRANULATION WITH WASTE HEAT RECOVERY

LARS MEIER (SMS GmbH)

Co-author in APPLICATION OF MIDREX TECHNOLOGIES IN INTEGRATED STEEL PLANTS; POSSIBLE REDUCTION OF ENVIRONMENTAL IMPACT AND OPEX

STEFAN MELZER (McGill University, Montreal)

Co-author in FORMATION OF IRON-ORE SINTER MINERALOGY AND MICROSTRUCTURE: TOWARDS A COMPREHENSIVE CONCEPTUAL MODEL OF THE FLAME FRONT

B. MERTAS (Institute for Chemical Processing of Coal, Zabrze, Poland)

Author in Can we rely on quality parameters of coke from laboratory coking installation?

HARUYASU MICHISHITA (Midrex Technologies)

Co-author in APPLICATION OF MIDREX TECHNOLOGIES IN INTEGRATED STEEL PLANTS; POSSIBLE REDUCTION OF ENVIRONMENTAL IMPACT AND OPEX

ROB MIJNEN (Danieli Corus BV)

Author in MODULAR UPGRADES FOR EXISTING BLAST FURNACE AUTOMATION SYSTEMS

ROBERT MILLNER (Primetals Technologies Austria GmbH)

Co-author in COMPARING THE CO2 EMISSIONS OF DIFFERENT IRONMAKING ROUTES

HIROSHI MIO (Nippon Steel & Sumitomo Metal Corp.)

Author in PREDICTION OF BURDEN DISTRIBUTION OF BLAST FURNACE BY USING DEM

KAPIL MODI (PELLET PLANT TATA STEEL JAMSHEDPUR)

Co-author in EFFECT OF FLUXING AGENTS ON THE QUALITY AND MICROSTRUCTURE OF HEMATITE PELLETS

VITALIY MOIKIN (Torex)

Co-author in ANALYSIS OF NONSTATIONARY TRANSIENT PROCESSES IN BLAST FURNACE

BRIAN J. MONAGHAN (University of Wollongong)

Co-author in CHARACTERISATION OF STEELPLANT BY-PRODUCTS TO REALISE THE VALUE OF FE AND ZN

B.J. MONAGHAN (University of Wollongong)

Co-author in SINTER – NUT COKE INTERACTION AND BEHAVIOUR DURING CONVEYOR BELT TRANSPORTATION AND DISCHARGE: A DEM STUDY

BRIAN J. MONAGHAN (School of Mechanical, Materials Mechatronics and Steel Research Hub, University of Wollongong)

Co-author in THE EFFECT OF BINARY AND TENARY MINERAL COMBINATIONS ON THE REACTIVITY OF A COKE ANALOGUE

ADELINE MORCEL (Swerea MEFOS AB)

Author in LOW CO2 IRONMAKING IN THE BLAST FURNACE

STEFAN MUENKEL (Maschinenfabrik Gustav Eirich GmbH &Co KG)

Co-author in AUTOMATIC SAMPLING AND ANALYSIS OF GRANULATED SINTER FEED

TAICHI MURAKAMI (Tohoku University)

Author in DISINTEGRATION MECHANISM OF CALCIUM FERRITE IN SINTER BY REDUCTION

AKINORI MURAO (JFE Steel Corporation)

Co-author in EFFECT OF SMALL COKE RATE ON CONSUMPTION BEHAVIOR OF SMALL COKE IN BLAST FURNACE

KONSTANTIN MYASNIKOV (KOSAYA GORA IRON WORKS)

Co-author in CHARGING PRACTICE OF BLAST FURNACE OPERATED WITH 100% ACID PELLETS

CESAR G. J. NADER (RHI AG)

Co-author in NEW TYPE OF PARTITION WALLS IN A PELLETIZING PLANT: A THERMO MECHANICAL ANALYSIS

DEBJANI NAG (Tata Steel)

Author in APPLICATION OF ORGANIC POLYMER IN COKE MAKING- TATA STEEL SCENARIO

PRABHAKAR NAIR (LanzaTech, USA)

Co-author in THE CIRCULAR ECONOMY: CARBON RECYCLING AND THE IRON INDUSTRY

YOICHI NARITA (Nippon Steel & Sumitomo Metal Corp.)

Co-author in PREDICTION OF BURDEN DISTRIBUTION OF BLAST FURNACE BY USING DEM

OOYAMA NOBUYUKI (JFE Steel Corporation)

Co-author in COMBINED INJECTION TECHNOLOGY OF GAS FUEL AND OXYGEN IN IRON ORE SINTERING PROCESS

SEIJI NOMURA (Ironmaking Research Lab., Process Research Laboratories, Nippon Steel & Sumitomo Metals Corp.,)

Co-author in EFFECTS OF BRIQUETTE BLEND ON PACKING STRUCTURE OF FINE COAL PART

GILLES NOUAILLE-DEGORCE (Paul Wurth S.A.)

Co-author in TECHNOLOGIES FOR IMPROVEMENT OF SINTER PLANTS

TAIHEI NOUCHI (JFE Steel Corporation)

Author in NEW IRONMAKING PROCESS TO ENHANCE THE FLEXIBILITY OF ENERGY SUPPLY AND USE OF LOW GRADE RESOURCES

RUSTAM NURIEV (KOSAYA GORA IRON WORKS)

Co-author in CHARGING PRACTICE OF BLAST FURNACE OPERATED WITH 100% ACID PELLETS

GRAHAM O’BRIEN (CSIRO)

Co-author in OBTAINING DETAILED MINERAL AND MINERAL/MACERAL ASSOCIATION INFORMATION IN COKE OVEN FEED COAL SAMPLES BY OPTICAL IMAGE ANALYSIS

O. OERLEMANS (Tata Steel Europe)

Co-author in REFRACTORIES FOR COKE OVEN WALL - OPERATOR'S PERSPECTIVE

HANSPETER OFNER (Primetals Technologies Austria GmbH)

Co-author in FINEX® - AN INNOVATIVE AND ENVIRONMENT FRIENDLY IRONMAKING PROCESS

LENA SUNDQVIST ÖKVIST (Swerea MEFOS AB)

Co-author in LOW CO2 IRONMAKING IN THE BLAST FURNACE

MARTIN ÖLUND (Swerea MEFOS AB)

Co-author in IMPACT ON COMBUSTION CONDITIONS FROM TUYERE INJECTION SETTINGS

TAKASHI ORIMOTO (Nippon Steel & Sumitomo Metal Corp.)

Co-author in PREDICTION OF BURDEN DISTRIBUTION OF BLAST FURNACE BY USING DEM

JOEL ORRE (Swerea MEFOS AB)

Co-author in LOW CO2 IRONMAKING IN THE BLAST FURNACE

OLEG OSTROVSKI (University of New South Wales)

Co-author in A STUDY OF THE GASEOUS REDUCTION OF MAGNETITE ORE IN A FIXED-BED REACTOR AND USING IN-SITU HIGH-TEMPER

JIAN PAN (Central South University)

Author in PELLETIZATION OF MALAYSIA MAGNETITE CONCENTRATES AND ITS PROPERTIES OF GAS-BASED DIRECT REDUCTION

B K PANDA (OCL India Limited)

Author in STUDIES ON MINERALOGICAL AND THERMO-MECHANICAL PROPERTIES OF DENSE SILICA BRICKS FOR COKE OVEN SOLE AND WALL LINING

NISHIT PATEL (Hatch Ltd)

Co-author in THE USE OF PLASMA TORCHES IN BLAST FURNACE IRONMAKING

INDRAJIT PAUL (PELLET PLANT TATA STEEL JAMSHEDPUR)

Co-author in EFFECT OF FLUXING AGENTS ON THE QUALITY AND MICROSTRUCTURE OF HEMATITE PELLETS

DARIO PAULUZZI (Danieli)

Author in HIGH-CARBON DRI THE FEEDING MATERIAL TO IMPROVE PERFORMANCES AND DECREASE CO2 EMISSIONS IN BOTH BF AND EAF

MARCO PERATO (Paul Wurth Italia)

Author in APPLICATION OF MIDREX TECHNOLOGIES IN INTEGRATED STEEL PLANTS; POSSIBLE REDUCTION OF ENVIRONMENTAL IMPACT AND OPEX

RAFAEL PEDROSA PEREIRA

Co-author in PID COMBUSTION – DEDICATED CONTROL FOR AIR ADMISSION IN A HEAT RECOVERY COKE OVEN AT TKCSA

LUKAS PETZOLD (Primetals Technologies Austria GmbH)

Author in APPLICATION OF THE HYBRID FLOTATION IN IRON ORE - PNEUMATIC FLOTATION FOR REMOVAL OF SULFUR

STEPHEN PHILLIPS (Hatch Ltd., Canada)

Co-author in STRUCTURAL ASSESSMENT OF BLAST FURNACE HEARTH REFRACTORY SYSTEM

STEPHEN PHILLIPS (Hatch Ltd)

Co-author in BLAST FURNACE HEARTH ASSESSMENT BY COMBINING AU-E AND THERMOCOUPLE DATA

ANTON PICHLER (Chair of Ferrous Metallurgy, Montanuniversitaet Leoben)

Author in ANALYSIS OF THE ALKALI DISTRIBUTION IN IRONMAKING REACTORS BY THERMOCHEMICAL MODELLING

DAVID J. PINSON (BlueScope Iron & Steelmaking Technology)

Co-author in CHARACTERISATION OF STEELPLANT BY-PRODUCTS TO REALISE THE VALUE OF FE AND ZN

D.J. PINSON (BlueScope Steel)

Co-author in SINTER – NUT COKE INTERACTION AND BEHAVIOUR DURING CONVEYOR BELT TRANSPORTATION AND DISCHARGE: A DEM STUDY

STEFAN PIRKER (Johannes Kepler University Linz)

Co-author in ADVANCED SIGNAL PROCESSING OF TUYERE PRESSURE DATA TO DETECT REDUCED HOT WIND THROUGHPUT AND RACEWAY BLOCKAGES

TOBIAS PLATTNER (Primetals Technologies Austria GmbH)

Co-author in THE CIRCULAR ECONOMY: CARBON RECYCLING AND THE IRON INDUSTRY

TOM PLIKAS (Hatch Ltd.)

Co-author in HELPING TO ADDRESS ENVIRONMENTAL CONTROL IN IRON ORE PROCESSING, IRON MAKING, AND COKE HANDLING OPERATIONS THROUGH THE USE OF COMPUTATIONAL FLUID DYNAMICS (CFD)

ANDREI POLIAKOV (CSIRO)

Co-author in MINERAL4/RECOGNITION4: A UNIVERSAL OPTICAL IMAGE ANALYSIS PACKAGE FOR IRON ORE, SINTER AND COKE CHARACTERIZATION

RUTH POULTNEY (MATERIALS PROCESSING INSTIUTE, UK)

Author in CHANGING BULK DENSITY IN CARBONISATION BLENDS

BIRENDRA PRASAD (OCL India Limited)

Co-author in STUDIES ON MINERALOGICAL AND THERMO-MECHANICAL PROPERTIES OF DENSE SILICA BRICKS FOR COKE OVEN SOLE AND WALL LINING

S PUSHPAVANAM (Indian Institute of Technology Madras)

Co-author in PHYSICAL MODELLING BASED ANALYSIS OF DRY SLAG GRANULATION

P. PUT (Tata Steel Europe)

Co-author in REFRACTORIES FOR COKE OVEN WALL - OPERATOR'S PERSPECTIVE

STEFAN PUTTINGER (Johannes Kepler University Linz)

Author in ADVANCED SIGNAL PROCESSING OF TUYERE PRESSURE DATA TO DETECT REDUCED HOT WIND THROUGHPUT AND RACEWAY BLOCKAGES

HAITAO QIAN (School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing)

Co-author in THE EFFECT OF BROWNCOAL ADDITION ON COKE STRENGTH

YA-NA QIE (North China University of Science and Technology)

Co-author in STUDY ON THE MECHANISM OF CEO2 AS COMBUSTION IMPROVER IN PCI

BARBARA RAMMER (Primetals Technologies Austria GmbH)

Author in COMPARING THE CO2 EMISSIONS OF DIFFERENT IRONMAKING ROUTES
Co-author in COREX® - AN ALTERNATIVE FOR HOT METAL PRODUCTION IN A CHALLENGING ENVIRONMENT

HARALD RAUSCH (DILLINGER, AG der Dillinger Hüttenwerke)

Co-author in DEVELOPMENT AND IMPLEMENTATION OF NEW MEASURING AND MONITORING SYSTEMS TO SUPPORT BF CONTROL

GOUTAM KUMAR RAUT (Tata Steel Limited)

Author in BLAST FURNACE PERFORMANCE WITH HIGHER PELLET IN BURDEN

DHIRHI RAVINDRA (Indian Institute of Technology Madras)

Co-author in PHYSICAL MODELLING BASED ANALYSIS OF DRY SLAG GRANULATION

A SRINIVAS REDDY (Tata Steel Limited)

Co-author in BLAST FURNACE PERFORMANCE WITH HIGHER PELLET IN BURDEN

REINHARD REDL (PRIMETALS Technology GmbH)

Co-author in SIMULATION BASED PELLET-PLANT DESIGN

CHRISTINE REHM

Co-author in APPLICATION OF SMALL ANGLE NEUTRON SCATTERING TO UNDERSTAND NANOPOROSITY OF COKES

MARK H. REID (Bragg Institute, Australian Nuclear Science and Technology Organisation)

Co-author in THE EFFECT OF BINARY AND TENARY MINERAL COMBINATIONS ON THE REACTIVITY OF A COKE ANALOGUE

JOHANN REIDETSCHLAEGER (PRIMETALS Technology GmbH)

Author in AUTOMATIC SAMPLING AND ANALYSIS OF GRANULATED SINTER FEED

NORBERT REIN (Primetals Technologies Austria GmbH)

Co-author in FINEX® - AN INNOVATIVE AND ENVIRONMENT FRIENDLY IRONMAKING PROCESS

FRANZ REUFER (Küttner GmbH & Co. KG, Germany)

Author in KÜTTNER’S PULVERIZED COAL INJECTION TECHNOLOGY – LATEST DEVELOPMENTS

RICHARD ROEST (University of Newcastle)

Author in CHARACTERISATION OF FRACTURE MECHANISMS IN A BLAST FURNACE COKE

LIN RONGSHAN (DILLINGER, AG der Dillinger Hüttenwerke)

Author in DEVELOPMENT AND IMPLEMENTATION OF NEW MEASURING AND MONITORING SYSTEMS TO SUPPORT BF CONTROL

STEFAN RUHS (Mettop GmbH)

Co-author in ILTEC - METTOP´S REVOLUTIONARY COOLING SOLUTION FOR THE STEEL INDUSTRY

BERNHARD RUMMER (voestalpine Stahl GmbH)

Author in THE LONG WAY TO PCI IN LINZ – FIRST OPERATION EXPERIENCE

AFSHIN SADRI (Hatch Ltd.)

Co-author in CAREFUL CONTROL OF REFRACTORY LINING CONDITIONS ENSURES PROLONGED CAMPAIGN OF BLAST FURNACE

RICHARD SAKUROVS (CSIRO Energy)

Author in APPLICATION OF SMALL ANGLE NEUTRON SCATTERING TO UNDERSTAND NANOPOROSITY OF COKES

RICHARD SAKUROVS (CSIRO)

Co-author in APPLICATION OF I600 FROM THE CSR TEST AS A MEASURE OF PILOT OVEN COKE STRENGTH

DAN SANDSTRÖM (Swerea MEFOS AB)

Co-author in IMPACT ON COMBUSTION CONDITIONS FROM TUYERE INJECTION SETTINGS

YASUSHI SASAKI (University of New South Wales)

Co-author in A STUDY OF THE GASEOUS REDUCTION OF MAGNETITE ORE IN A FIXED-BED REACTOR AND USING IN-SITU HIGH-TEMPER

M. Sato

Co-author in NEW IRONMAKING PROCESS TO ENHANCE THE FLEXIBILITY OF ENERGY SUPPLY AND USE OF LOW GRADE RESOURCES

SONJA SCHADLER (voestalpine Stahl Donawitz GmbH)

Co-author in AUTOMATIC SAMPLING AND ANALYSIS OF GRANULATED SINTER FEED
Co-author in QUANTIFICATION OF SINTER MINERAL PHASES WITH IMAGE PROCESSING

MARTIN SCHALER (Primetals Technologies Austria GmbH)

Co-author in BLAST FURNACE PROCESS OPTIMIZATION WITH CLOSED-LOOP EXPERT SYSTEMS – 25 YEARS OF EXPERIENCE

JOHANNES SCHENK (Chair of Ferrous Metallurgy, Montanuniversitaet Leoben)

Co-author in ANALYSIS OF THE ALKALI DISTRIBUTION IN IRONMAKING REACTORS BY THERMOCHEMICAL MODELLING

JOHANNES SCHENK (Montanuniversitaet Leoben)

PETER SCHMÖLE (ThyssenKrupp Steel Europe)

Author in THE BLAST FURNACE - FIT FOR THE FUTURE?

ROBIN SCHOTT

Co-author in KÜTTNER’S PULVERIZED COAL INJECTION TECHNOLOGY – LATEST DEVELOPMENTS

ANDREJ SCHULAKOW-KLASS (Paul Wurth Deutschland GmbH)

Co-author in TECHNOLOGIES FOR IMPROVEMENT OF SINTER PLANTS

MARC-ANDRE SCHULTEN (Thyssenkrupp Steel Europe AG)

Author in COMMISSIONING OF 60 KG MOVABLE WALL OVEN AT THYSSENKRUPP STEEL EUROPE AG

BERNHARD SCHÜRZ (Primetals Technologies Austria GmbH)

Co-author in BLAST FURNACE PROCESS OPTIMIZATION WITH CLOSED-LOOP EXPERT SYSTEMS – 25 YEARS OF EXPERIENCE

ELMAR SCHUSTER (voestalpine Stahl Donawitz GmbH)

Co-author in AUTOMATIC SAMPLING AND ANALYSIS OF GRANULATED SINTER FEED
Co-author in INNOFREIGHT CONTAINER SYSTEMS - A NEW STANDARD IN RAILWAY TRANSPORT FOR VOESTALPINE
Co-author in QUANTIFICATION OF SINTER MINERAL PHASES WITH IMAGE PROCESSING

STEFAN SCHUSTER (voestalpine Stahl Gmbh)

Co-author in INNOVATIVE TOOLS FOR PROCESS OPTIMIZATION – BURDEN SURFACE SCANNING VIA BEAMFORMING RADAR AND MEASUREMENT OF THE TOP GAS TEMPERATURE DISTRIBUTION

ELMAR SCHUSTER (voestalpine Stahl Donawitz GmbH, Leoben)

Co-author in ADVANCED SIGNAL PROCESSING OF TUYERE PRESSURE DATA TO DETECT REDUCED HOT WIND THROUGHPUT AND RACEWAY BLOCKAGES

THOMAS SCHWALM (Paul Wurth S.A.)

Co-author in TECHNOLOGIES FOR IMPROVEMENT OF SINTER PLANTS

ANDREAS SEILER (Maschinenfabrik Gustav Eirich GmbH &Co KG)

Co-author in AUTOMATIC SAMPLING AND ANALYSIS OF GRANULATED SINTER FEED

CHANDRA SEKHAR (R&D TATA STEEL JAMSHEDPUR INDIA)

Co-author in EFFECT OF FLUXING AGENTS ON THE QUALITY AND MICROSTRUCTURE OF HEMATITE PELLETS

DIETER SENK (RWTH Aachen University)

Co-author in TOWARDS PREDICTION OF COAL CONVERSION BEHAVIOUR IN THE BLAST FURNACE

ANDREW SHALYGIN (KOSAYA GORA IRON WORKS)

Co-author in CHARGING PRACTICE OF BLAST FURNACE OPERATED WITH 100% ACID PELLETS

IGOR SHEPETOVSKY (KOSAYA GORA IRON WORKS)

Author in CHARGING PRACTICE OF BLAST FURNACE OPERATED WITH 100% ACID PELLETS

BENJING SHI

Co-author in PELLETIZATION OF MALAYSIA MAGNETITE CONCENTRATES AND ITS PROPERTIES OF GAS-BASED DIRECT REDUCTION

JOHN SHIBU (Primetals Technologies Austria GmbH)

Author in FINEX® - AN INNOVATIVE AND ENVIRONMENT FRIENDLY IRONMAKING PROCESS

LIU SHIH-HSIEN (China steel corporation)

Co-author in EFFECT OF VOLATILE MATTER OF COAL ON VOLUME CHANGE AND REDUCTION OF IRON ORE/COAL COMPOSITE PELLETS

LIU SHIH-HSIEN (China Steel Corporation)

Co-author in DEVELOPMENT OF SLAG FLUIDITY PREDICTION SYSTEM AND ITS APPLICATION FOR BLAST FURNACE

IZUMI SHIMOYAMA (Steel Research Laboratory, JFE Steel Corp.,)

Co-author in NEW THEORY OF COAL BLENDING BASED ON NOVEL THERMOPLASTICITY MEASUREMENT; PERMEATION DISTANCE

SUNGKEE SHIN (POSCO Ltd., Seoul, Korea)

Co-author in FINEX® - AN INNOVATIVE AND ENVIRONMENT FRIENDLY IRONMAKING PROCESS

SOON-MO SHIN (GIFT/POSTECH)

Author in EFFECT OF COKES GASIFICATION WITH CO2 AND H2O ON THE POROSITY AND STREHGNTH IN 1100-1500°C

VLADIMIR SHVIDKIY (Ural Federal University)

Co-author in ANALYSIS OF NONSTATIONARY TRANSIENT PROCESSES IN BLAST FURNACE

LR Singh (JSW steel Ltd)

Co-author in ENHANCING THE PRODUCTIVITY OF LARGE BLAST FURNACES AT HIGH SLAG RATES

AVTAR Singh (JSW steel Ltd)

Co-author in ENHANCING THE PRODUCTIVITY OF LARGE BLAST FURNACES AT HIGH SLAG RATES

NAVEEN Singh (JSW steel Ltd)

Author in ENHANCING THE PRODUCTIVITY OF LARGE BLAST FURNACES AT HIGH SLAG RATES

JAMES SMALL (Tata Steel)

Author in FORMATION OF IRON-ORE SINTER MINERALOGY AND MICROSTRUCTURE: TOWARDS A COMPREHENSIVE CONCEPTUAL MODEL OF THE FLAME FRONT

Ł. SMĘDOWSKI (Institute for Chemical Processing of Coal, Zabrze, Poland)

Co-author in Can we rely on quality parameters of coke from laboratory coking installation?

MARTIN SMITH (Primetals Technologies)

Author in BLAST FURNACE COOLING STAVE DESIGN

A. SOBOLEWSKI (Institute for Chemical Processing of Coal, Zabrze, Poland)

Co-author in Can we rely on quality parameters of coke from laboratory coking installation?

ALEKSANDR SOKOLOV (Cherepovets Metallurgical Combine – Severstal)

Co-author in CAREFUL CONTROL OF REFRACTORY LINING CONDITIONS ENSURES PROLONGED CAMPAIGN OF BLAST FURNACE

ANNA SOKOLOVA

Co-author in APPLICATION OF SMALL ANGLE NEUTRON SCATTERING TO UNDERSTAND NANOPOROSITY OF COKES

LENA S ÖKVIST (Swerea MEFOS AB)

Author in IMPACT ON COMBUSTION CONDITIONS FROM TUYERE INJECTION SETTINGS

TENGFEI SONG (University of Science and Technology Beijing)

Co-author in KINETIC ANALYSIS AND EFFECT OF BIOMASS ASH ON COMBUSTION CHARACTERISTIC OF PULVERIZED COAL

TENGFEI SONG (School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing,)

Author in THE EFFECT OF BROWNCOAL ADDITION ON COKE STRENGTH

TENGFEI SONG (School of Metallurgical and Ecological Engineering)

Co-author in CHARACTERISTICS OF LITHIUM SILICATE PREPARED BY SOLID STATE REACTION AND THERMOGRAVIMETRIC ANALYSIS

WENHU SONG (BaoShan Iron and Steel Co., Ltd.)

Co-author in STUDY ON EROSION OF LARGE BLAST FURNACE HEARTH AND TECHNIQUES TO PROLONG CAMPAIGN LIFE OF HEARTH

ANDREAS SPANLANG (K1-MET GmbH)

Co-author in FLOW SHEET MODELLING OF STEEL MAKING ROUTES IN A PROCESS INTEGRATION PLATFORM

NIKOLAI SPIRIN (Ural Federal University (URFU))

Author in OPTIMAL DISTRIBUTION OF SUPPLEMENTAL FUEL AND OXYGEN AMONGST FURNACES IN BLAST FURNACE SHOP

NIKOLAI SPIRIN (Ural Federal University)

Co-author in ANALYSIS OF NONSTATIONARY TRANSIENT PROCESSES IN BLAST FURNACE

MATTHIAS SPÖTTLE (ThyssenKrupp Industrial Solutions AG)

Author in DEVELOPMENT OF A VERTICAL CHAMBER COKING OVEN FOR UPGRADING LIGNITES OR SUB-BITUMINOUS COAL

LEOPOLD STEGFELLNER (voestalpine Stahl Gmbh)

Co-author in INNOVATIVE TOOLS FOR PROCESS OPTIMIZATION – BURDEN SURFACE SCANNING VIA BEAMFORMING RADAR AND MEASUREMENT OF THE TOP GAS TEMPERATURE DISTRIBUTION

WOLFGANG STERRER (Primetals Technologies Austria GmbH)

Co-author in COREX® - AN ALTERNATIVE FOR HOT METAL PRODUCTION IN A CHALLENGING ENVIRONMENT

VIKTOR STISKALA (Thyssenkrupp Steel Europe AG)

Co-author in COMMISSIONING OF 60 KG MOVABLE WALL OVEN AT THYSSENKRUPP STEEL EUROPE AG

HUGO STOCKER (Voestalpine Stahl Donawitz GmbH)

Co-author in ANALYSIS OF THE ALKALI DISTRIBUTION IN IRONMAKING REACTORS BY THERMOCHEMICAL MODELLING

HUGO STOCKER (voestalpine Stahl Donawitz GmbH)

Co-author in EXPERIMENTAL SIMULATION OF THE INTERACTION OF SLAG AND HOT METAL WITH COKE AT THE BOSH REGION OF BLAST FURNACE

HUGO STOCKER (voestalpine Stahl Donawitz GmbH, Leoben)

Co-author in ADVANCED SIGNAL PROCESSING OF TUYERE PRESSURE DATA TO DETECT REDUCED HOT WIND THROUGHPUT AND RACEWAY BLOCKAGES

VEENA SUBRAMANYAM (Alter NRG Corp)

Co-author in THE USE OF PLASMA TORCHES IN BLAST FURNACE IRONMAKING

MITREN SUKHRAM (Hatch Ltd)

Author in THE USE OF PLASMA TORCHES IN BLAST FURNACE IRONMAKING

HIROYUKI SUMI (Steel Research Laboratory, JFE Steel Corp.,)

Co-author in NEW THEORY OF COAL BLENDING BASED ON NOVEL THERMOPLASTICITY MEASUREMENT; PERMEATION DISTANCE

YAN-QIN SUN (North China University of Science and Technology)

Co-author in STUDY ON THE MECHANISM OF CEO2 AS COMBUSTION IMPROVER IN PCI

LI-YUAN SUN (North China University of Science and Technology)

Co-author in STUDY ON THE MECHANISM OF CEO2 AS COMBUSTION IMPROVER IN PCI

HANNU SUOPAJÄRVI (Process Metallurgy Research Unit)

Co-author in IRON ORE PELLET REDUCTION BEHAVIOR IN POTENTIAL LOW CO2 BLAST FURNACE SCENARIOS

S C SWAIN (OCL India Limited)

Co-author in STUDIES ON MINERALOGICAL AND THERMO-MECHANICAL PROPERTIES OF DENSE SILICA BRICKS FOR COKE OVEN SOLE AND WALL LINING

V. TADAION (Tata Steel Europe)

Co-author in REFRACTORIES FOR COKE OVEN WALL - OPERATOR'S PERSPECTIVE

K. Takahashi

Co-author in NEW IRONMAKING PROCESS TO ENHANCE THE FLEXIBILITY OF ENERGY SUPPLY AND USE OF LOW GRADE RESOURCES

KAI TANG (Chongqing University)

Co-author in EFFECT OF SILICA ON THE REDUCTION KINETICS OF CaO-Fe2O3-SiO2 SYSTEM

CHRISTOPH THALER (voestalpine Stahl GmbH)

CHRISTOPH THALER (Voestalpine Stahl Linz GmbH, Linz)

Co-author in ANALYSIS OF THE ALKALI DISTRIBUTION IN IRONMAKING REACTORS BY THERMOCHEMICAL MODELLING

DIMITRI Tikhonov (NLMK, Novolipetsk Steel, Lipetsk, Russia)

Co-author in IDEAL BLAST FURNACE PROCESS

D.N. TIKHONOV (NLMK, Novolipetsk Steel, Lipetsk, Russia)

Co-author in RESERVES FOR RAISING THE EFFICIENCY OF BLAST FURNACE PROCESS

PAUL TOCKERT (PAUL WURTH S.A.)

Author in NEW BLAST FURNACE OPERATION PROSPECTS WITH THE G3 CHUTE TRANSMISSION GEARBOX

NAJIBEH TOLOUE FARROKH (Sharif University of Technology)

Author in EFFECT OF HEATING RATE ON THE PROPERTIES OF TWO NONCOKING COALS USED IN TUNNEL KILN DIRECT REDUCTION OF IRON PROCESS

SHIN TOMISAKI (Nippon Steel & Sumikin Engineering Co., Ltd)

Co-author in CO2 ULTIMATE REDUCTION IN STEELMAKING PROCESS (COURSE50 PROJECT)

YUKIO TOMITA (Nisshin Steel Co., Ltd.)

Co-author in CO2 ULTIMATE REDUCTION IN STEELMAKING PROCESS (COURSE50 PROJECT)

SHIGEAKI TONOMURA (Nippon Steel & Sumitomo Metal Corporation)

Author in CO2 ULTIMATE REDUCTION IN STEELMAKING PROCESS (COURSE50 PROJECT)

UWE TSCHIRNER (ThyssenKrupp Industrial Solutions AG)

Co-author in DEVELOPMENT OF A VERTICAL CHAMBER COKING OVEN FOR UPGRADING LIGNITES OR SUB-BITUMINOUS COAL

KAZUYA UEBO (Ironmaking Research Lab., Process Research Laboratories, Nippon Steel & Sumitomo Metals Corp.,)

Co-author in EFFECTS OF BRIQUETTE BLEND ON PACKING STRUCTURE OF FINE COAL PART

CHAD VAN DER WOUDE (Hatch Ltd., Canada)

Co-author in STRUCTURAL ASSESSMENT OF BLAST FURNACE HEARTH REFRACTORY SYSTEM

VINCENT VAN HINSBERG (McGill University, Montreal)

Co-author in FORMATION OF IRON-ORE SINTER MINERALOGY AND MICROSTRUCTURE: TOWARDS A COMPREHENSIVE CONCEPTUAL MODEL OF THE FLAME FRONT

REINOUD VAN LAAR (Danieli Corus BV)

Author in BLAST FURNACEMODERN DESIGN – MODULAR CONSTRUCTION

ROB VAN OPBERGEN (Danieli Corus BV)

Author in BLAST FURNACE OPERATION IN ROUGH TIMES

VICTOR VAN STRAATEN (Danieli Corus BV)

Co-author in BLAST FURNACE OPERATION IN ROUGH TIMES
Co-author in BLAST FURNACEMODERN DESIGN – MODULAR CONSTRUCTION

KEITH VINING (CSIRO)

EVGENIY VINOGRADOV (Cherepovets Metallurgical Combine – Severstal)

Author in CAREFUL CONTROL OF REFRACTORY LINING CONDITIONS ENSURES PROLONGED CAMPAIGN OF BLAST FURNACE

D.V. Vorsina (NLMK, Novolipetsk Steel, Lipetsk, Russia)

Co-author in IDEAL BLAST FURNACE PROCESS

M. v. WIJNGAARDEN (Tata Steel Europe)

Co-author in REFRACTORIES FOR COKE OVEN WALL - OPERATOR'S PERSPECTIVE

PETER WANEK-PUSSET (Innofreight Speditions GmbH)

Co-author in INNOFREIGHT CONTAINER SYSTEMS - A NEW STANDARD IN RAILWAY TRANSPORT FOR VOESTALPINE

GUANGWEI WANG (University of Science and Technology Beijing)

Co-author in THE INFLUENCE OF ZINC VAPOR ON COMPOSITION AND PROPERTIES OF COKE

CHUAN WANG (Swerea MEFOS, Process Integration Department)

Co-author in IRON ORE PELLET REDUCTION BEHAVIOR IN POTENTIAL LOW CO2 BLAST FURNACE SCENARIOS

GUANG-WEI WANG (University of Science and Technology Beijing)

Co-author in EFFECTS OF MGO ON THE SINTERING LIQUID, THE PROPERTIES AND MINERALOGICAL MORPHOLOGY OF THE HIGH-BASICITY SINTER

YAO-ZU WANG (University of Science and Technology Beijing)

Co-author in EFFECTS OF MGO ON THE SINTERING LIQUID, THE PROPERTIES AND MINERALOGICAL MORPHOLOGY OF THE HIGH-BASICITY SINTER

HAIYANG WANG (University of Science and Technology Beijing)

Co-author in KINETIC ANALYSIS AND EFFECT OF BIOMASS ASH ON COMBUSTION CHARACTERISTIC OF PULVERIZED COAL

HAIYANG WANG (School of Metallurgical and Ecological Engineering)

Author in CHARACTERISTICS OF LITHIUM SILICATE PREPARED BY SOLID STATE REACTION AND THERMOGRAVIMETRIC ANALYSIS

GUANGWEI WANG (School of Metallurgical and Ecological Engineering)

Co-author in CHARACTERISTICS OF LITHIUM SILICATE PREPARED BY SOLID STATE REACTION AND THERMOGRAVIMETRIC ANALYSIS

GUANGWEI WANG (School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing,)

Co-author in THE EFFECT OF BROWNCOAL ADDITION ON COKE STRENGTH

PETER WARREN (Materials Processing Institute)

Author in THE HIGHS AND LOWS OF THE FOURTH CAMPAIGN OF REDCAR BLAST FURNACE, SSI UK, APRIL 2012 – SEPTEMBER 2015

KARRYN WARREN (CSIRO)

Co-author in OBTAINING DETAILED MINERAL AND MINERAL/MACERAL ASSOCIATION INFORMATION IN COKE OVEN FEED COAL SAMPLES BY OPTICAL IMAGE ANALYSIS

PETER WARREN (Danieli Corus BV)

Co-author in MODULAR UPGRADES FOR EXISTING BLAST FURNACE AUTOMATION SYSTEMS

FERRY WEEGENAAR (Danieli Corus BV)

Co-author in MODULAR UPGRADES FOR EXISTING BLAST FURNACE AUTOMATION SYSTEMS

BERND WEISS (Primetals Technologies GmbH)

Author in FLOW SHEET MODELLING OF STEEL MAKING ROUTES IN A PROCESS INTEGRATION PLATFORM

ANDREA WERNER (Primetals Technologies, Austria GmbH)

Author in DRY BLAST FURNACE SLAG GRANULATION WITH WASTE HEAT RECOVERY

BRUNO WILHELMI (RHI AG)

Co-author in NEW TYPE OF PARTITION WALLS IN A PELLETIZING PLANT: A THERMO MECHANICAL ANALYSIS

MATHIS WIRTH (PRIMETALS Technology GmbH)

Co-author in SIMULATION BASED PELLET-PLANT DESIGN

CHRISTIAN WOLF (Velco GmbH)

Author in EQUIPMENT FOR THE INJECTION OF TI-CONTAINING POWDERS INTO THE BLAST FURNACE TUYERES

CARL WOLF (LanzaTech, USA)

Co-author in THE CIRCULAR ECONOMY: CARBON RECYCLING AND THE IRON INDUSTRY

JENNIFER WOLOSHYN (Hatch Ltd.)

Author in HELPING TO ADDRESS ENVIRONMENTAL CONTROL IN IRON ORE PROCESSING, IRON MAKING, AND COKE HANDLING OPERATIONS THROUGH THE USE OF COMPUTATIONAL FLUID DYNAMICS (CFD)

LIJIA WU (DILLINGER, AG der Dillinger Hüttenwerke)

Co-author in DEVELOPMENT AND IMPLEMENTATION OF NEW MEASURING AND MONITORING SYSTEMS TO SUPPORT BF CONTROL

WALTER WUKOVITS (TU Wien, Institute of Chemical Engineering)

Co-author in FLOW SHEET MODELLING OF STEEL MAKING ROUTES IN A PROCESS INTEGRATION PLATFORM

JOHANN WURM (Primetals Technologies Austria GmbH)

Co-author in COREX® - AN ALTERNATIVE FOR HOT METAL PRODUCTION IN A CHALLENGING ENVIRONMENT

RUNSHENG XU (School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing,)

Co-author in THE EFFECT OF BROWNCOAL ADDITION ON COKE STRENGTH

RUNSHENG XU (University of Science and Technology Beijing)

Co-author in KINETIC ANALYSIS AND EFFECT OF BIOMASS ASH ON COMBUSTION CHARACTERISTIC OF PULVERIZED COAL
Co-author in THE INFLUENCE OF ZINC VAPOR ON COMPOSITION AND PROPERTIES OF COKE

WANREN Xu (BaoShan Iron and Steel Co., Ltd.)

Author in STUDY ON EROSION OF LARGE BLAST FURNACE HEARTH AND TECHNIQUES TO PROLONG CAMPAIGN LIFE OF HEARTH

SENWEI XUAN (Chongqing University)

Co-author in EFFECT OF SILICA ON THE REDUCTION KINETICS OF CaO-Fe2O3-SiO2 SYSTEM

TETSUYA YAMAMOTO (Steel Research Laboratory, JFE Steel Corp.,)

Co-author in NEW THEORY OF COAL BLENDING BASED ON NOVEL THERMOPLASTICITY MEASUREMENT; PERMEATION DISTANCE

TETSUYA YAMAMOTO (JFE Steel Corporation)

Co-author in COMBINED INJECTION TECHNOLOGY OF GAS FUEL AND OXYGEN IN IRON ORE SINTERING PROCESS

JIE YAN (Hebei Iron & Steel Group)

Co-author in EFFECTS OF MGO ON THE SINTERING LIQUID, THE PROPERTIES AND MINERALOGICAL MORPHOLOGY OF THE HIGH-BASICITY SINTER

ZHIWU YAN (University of Science and Technology Beijing)

Author in ADSORPTION CHARACTER OF SINTER ORE ON POTASSIUM VAPOR
Author in STUDY THE INFLUENCE MECHANISM OF POTASSIUM VAPOUR ON SINTER REDUCTION

YURIY YAROSHENKO (Ural Federal University)

Co-author in ANALYSIS OF NONSTATIONARY TRANSIENT PROCESSES IN BLAST FURNACE

SANG-HO YI (POSCO Ltd., Seoul, Korea)

Co-author in FINEX® - AN INNOVATIVE AND ENVIRONMENT FRIENDLY IRONMAKING PROCESS

SANG-HO YI (POSCO)

Author in UPDATES ON THE FINEX®, A COMMERCIALLY PROVEN ALTERNATIVE IRON-MAKING PROCESS

WINNIE YING (Hatch Ltd.)

Co-author in CAREFUL CONTROL OF REFRACTORY LINING CONDITIONS ENSURES PROLONGED CAMPAIGN OF BLAST FURNACE

XIANG YUAN (University of Science and Technology Beijing)

Co-author in ADSORPTION CHARACTER OF SINTER ORE ON POTASSIUM VAPOR
Co-author in STUDY THE INFLUENCE MECHANISM OF POTASSIUM VAPOUR ON SINTER REDUCTION

SOON IL YUN (CHOSUN REFRACTORIES, Co., Ltd.)

Co-author in DEVELOPMENT OF REACTION BONDED SiC BRICK WHICH HAVE HIGH THERMALL CONDUCTIVITY FOR BLAST FURNACE

CHOI YUN JAE (CHOSUN REFRACTORIES, Co., Ltd)

Co-author in THE STUDY OF CORE-BORED TAPHOLE CLAY USED IN FINEX

SERGEI ZAGAINOV (Ural Federal University (URFU))

Author in ENERGY EFFICIENT TECHNOLOGY TO PRODUCE HOT METAL FROM TITANIA-MAGNETITE ORE

DOMINIK ZANKL (Johannes Kepler University)

Co-author in INNOVATIVE TOOLS FOR PROCESS OPTIMIZATION – BURDEN SURFACE SCANNING VIA BEAMFORMING RADAR AND MEASUREMENT OF THE TOP GAS TEMPERATURE DISTRIBUTION

LUKAS ZENI (Innofreight Speditions GmbH)

Author in INNOFREIGHT CONTAINER SYSTEMS - A NEW STANDARD IN RAILWAY TRANSPORT FOR VOESTALPINE

JIANLIANG ZHANG (University of Science and Technology Beijing)

Co-author in ADSORPTION CHARACTER OF SINTER ORE ON POTASSIUM VAPOR
Co-author in KINETIC ANALYSIS AND EFFECT OF BIOMASS ASH ON COMBUSTION CHARACTERISTIC OF PULVERIZED COAL
Co-author in STUDY THE INFLUENCE MECHANISM OF POTASSIUM VAPOUR ON SINTER REDUCTION
Co-author in THE INFLUENCE OF ZINC VAPOR ON COMPOSITION AND PROPERTIES OF COKE

FENG ZHANG

Co-author in THE OXIDIZING PELLETIZATION OF MANGANESE ORE FINES AND ITS CONSOLIDATION MECHANISM

HESHUN ZHANG (ShougangJingtang United Iron & Steel Co. Ltd)

Co-author in ADSORPTION CHARACTER OF SINTER ORE ON POTASSIUM VAPOR

QIANG ZHANG

Co-author in A STUDY ON THE METALLIZING SINTERING OF PELLETS OF IN-PLANT IRON-BEARING DUST AND MUD

JIAN-LIANG ZHANG (University of Science and Technology Beijing)

Author in EFFECTS OF MGO ON THE SINTERING LIQUID, THE PROPERTIES AND MINERALOGICAL MORPHOLOGY OF THE HIGH-BASICITY SINTER

GUANGQING ZHANG (University of Wollongong)

Co-author in CHARACTERISATION OF STEELPLANT BY-PRODUCTS TO REALISE THE VALUE OF FE AND ZN

GUNAGQING ZHANG (School of Mechanical, Materials Mechatronics and Steel Research Hub, University of Wollongong)

Co-author in THE EFFECT OF BINARY AND TENARY MINERAL COMBINATIONS ON THE REACTIVITY OF A COKE ANALOGUE

JIANQIANG ZHANG (University of New South Wales)

Co-author in A STUDY OF THE GASEOUS REDUCTION OF MAGNETITE ORE IN A FIXED-BED REACTOR AND USING IN-SITU HIGH-TEMPER

HESHUN ZHANG (Shougang Jingtang United Iron & Steel Co. Ltd.)

Co-author in STUDY THE INFLUENCE MECHANISM OF POTASSIUM VAPOUR ON SINTER REDUCTION

JIANLIANG ZHANG (School of Metallurgical and Ecological Engineering)

Co-author in CHARACTERISTICS OF LITHIUM SILICATE PREPARED BY SOLID STATE REACTION AND THERMOGRAVIMETRIC ANALYSIS

JIANLIANG ZHANG (School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing,)

Co-author in THE EFFECT OF BROWNCOAL ADDITION ON COKE STRENGTH

DI ZHAO (University of Science and Technology Beijing)

Co-author in THE INFLUENCE OF ZINC VAPOR ON COMPOSITION AND PROPERTIES OF COKE

JIANBO ZHONG (University of Science and Technology Beijing)

Author in THE INFLUENCE OF ZINC VAPOR ON COMPOSITION AND PROPERTIES OF COKE

JIANBO ZHONG (School of Metallurgical and Ecological Engineering)

Co-author in CHARACTERISTICS OF LITHIUM SILICATE PREPARED BY SOLID STATE REACTION AND THERMOGRAVIMETRIC ANALYSIS

DEQING ZHU (School of Mineral processing and Bioengineering, Central South University)

ENNO ZINNGREBE (McGill University, Montreal)

Co-author in FORMATION OF IRON-ORE SINTER MINERALOGY AND MICROSTRUCTURE: TOWARDS A COMPREHENSIVE CONCEPTUAL MODEL OF THE FLAME FRONT

JOHANN ZIRNGAST (voestalpine Stahl Donawitz GmbH)

Co-author in AUTOMATIC SAMPLING AND ANALYSIS OF GRANULATED SINTER FEED
Co-author in INNOFREIGHT CONTAINER SYSTEMS - A NEW STANDARD IN RAILWAY TRANSPORT FOR VOESTALPINE