EUROPEAN STEEL TECHNOLOGY AND APPLICATION DAYS 2017 - ESTAD 2017

Name: EUROPEAN STEEL TECHNOLOGY AND APPLICATION DAYS 2017 - ESTAD 2017
Start: 2017-06-26T08:00:00+02:00
End: 2017-06-29T18:30:00+02:00
Location: No location set

26–29 Jun 2017

Europe/Vienna timezone

Online registration is closed!!

Author List

Pavel Adamyanets
- Co-author in Opportunities of experimental and numerical simulation of steel rolling technologies at the Institute of Metal Forming of TU Bergakademie Freiberg
Mariana Adderley
- Co-author in Dynamic on-line monitoring and end point control of dephosphorisation in the BOF converter
Alexander Adleff
- Co-author in Upgrade of stainless and special steel production by implementation of AOD process at ACRONI
Hesham Ahmed
- Author in Unconventional reducing agents for sustainable blast furnace ironmaking
- Co-author in Investigating the oxidation kinetics of magnetite pellet
Christoph Aichinger
- Co-author in Comprehensive competence in beneficiation technologies – from the raw materials to steel
Bilal Akgül
- Co-author in Energy saving and process optimization in a conventional hot strip mill by application of the latest high-efficient descaling technology
YOUSIF ALDHAFEERY
- Author in Utilization of olefin plants waste coke as carbon additive in steel making
ARDESI ALESSANDRO
- Co-author in Automatic surface inspection in steel products ensures safe, cost efficient and timely defect detection in production
David Algermissen
- Author in Factors of influence during and after the electric steel making process: Characterization and optimization of electric arc furnace slag
- Co-author in Valorisation of slag and by products from EAF-metallurgy – NoWASTE a feasible way to go?
Hammam Al-Jarallah (SABIC - Metals)
- Co-author in Utilization of olefin plants waste coke as carbon additive in steel making
Abdulaziz Al-Jutaili
- Co-author in Yield improvement at direct reduction plant, module-E by modifying oxide screen-mesh
Ralf Allmannsdörfer
- Co-author in Hot blast stoves – Latest developments, assessment and lifetime extension
Eric Almeida
- Co-author in Slagless technology - New BOF performances at GERDAU OURO BRANCO
Theeban Al-Otaibi
- Co-author in Yield improvement at direct reduction plant, module-E by modifying oxide screen-mesh
Turki Al-Qahtani (SABIC - Metals)
- Co-author in Utilization of olefin plants waste coke as carbon additive in steel making
Moneef Al-Shammary (SABIC - Metals)
- Co-author in Utilization of olefin plants waste coke as carbon additive in steel making
Alois Altenhofer
- Co-author in DR plant process optimization with DRIpaxTM expert system
Mohammed Al-Wenais
- Co-author in Yield improvement at direct reduction plant, module-E by modifying oxide screen-mesh
Fayez Al-Zeman (SABIC - Metals)
- Co-author in Utilization of olefin plants waste coke as carbon additive in steel making
Anton Andersson
- Co-author in Influence of basicity on chromium leaching of low alloy EAF slag
- Co-author in Unconventional reducing agents for sustainable blast furnace ironmaking
Charlotte Andersson
- Co-author in Investigating the oxidation kinetics of magnetite pellet
Wellington Andrade
- Co-author in Continuous improvements in BOF at Arcelor Mittal João Monlevade by technology slagless lance
- Co-author in Slagless technology - New BOF performances at GERDAU OURO BRANCO
Mazzarno Andrea
- Co-author in The production of railway rails in modern and efficient plants - The new ARBZ rail mill
MERLUZZI ANDREA
- Co-author in Danieli intelligent system: a leap forward towards the intelligent plant
POLO ANDREA
- Co-author in Danieli intelligent system: a leap forward towards the intelligent plant
Franz Androsch
- Author in Innovation in the steel industry by voestalpine
Lorenzo Angelini (Feralpi Siderurgica S.p.A.)
- Author in Activities for EAF Process Improvement to Acciaierie di Calvisano including KPI's approach for process monitoring and implementation of lime injection
LUGNAN ANGELO
- Co-author in Automatic surface inspection in steel products ensures safe, cost efficient and timely defect detection in production
Kai Ankermann
- Co-author in The digitalization of steel production
Claus-Peter Antoine
- Co-author in Radar solutions for harsh environmental conditions
Rajko Antonic
- Co-author in Dynamic on-line monitoring and end point control of dephosphorisation in the BOF converter
Rajko Antonitc (Minkon GmbH)
- Co-author in Online Measurement of dissolved gasses in secondary metallurgy
Juergen Antrekowitsch
- Co-author in Zinc oxide from steel mill dust - A wide range of opportunities
Jens Apfel
- Co-author in Extended new overview of chemical injection systems at the EAF
Daniele Archetti
- Co-author in Sinter plant and basic oxygen furnace waste heat utilization – New configuration with ORC modules for power generation
Alessandro Ardesi (Danieli Automation SpA)
- Co-author in HiPROFILE innovative defect detection package to increase production quality
Takashi Arima
- Co-author in Influence of kind and particle size of semi-soft coking coals on dilatation of blended coal
david arnu
- Co-author in Data mining continuous sensor data for training plant wide defect models
Wagner Assunção
- Co-author in Slagless technology - New BOF performances at GERDAU OURO BRANCO
Giacomo Astolfi
- Co-author in A training framework for i.Process/Steel-RHF APC system
- Co-author in i.Process/Steel-RHF: An adaptive algorithm aimed at online optimization of re-heating furnaces
Maycon Athayde
- Author in OUTOTEC performance services for iron ore agglomeration plants
- Author in Outotec Solution for Pelletizing Plant Low Nox emission
- Co-author in Optimal mixing and granulation process for fine utilization in sinterplants
Matti Aula
- Author in Analysis of time delay in heat transfer caused by slag accumulated on EAF side panels
Alexander Babich
- Author in Influence of pre-treated biomass on the microstructure of metallurgical coke
- Co-author in Granulation of ultra-fine ores for utilization in iron ore sintering
- Co-author in Influence of injection of pre-reduced iron ores on the processes in the blast furnace raceway
Sergei Babiy
- Co-author in Improving operational efficiency and cost competiveness of steel plants - A case study for electric furnace melt shop and hot rolling mill
Jan Bader
- Author in Vacuum converter – Producing special steels and ferroalloys
- Co-author in SHARC - Shaft arc furnace - Minimized energy consumption, efficient scrap preheating and low conversion costs
Duane Baker
- Co-author in Explosions due to the entrapment of water by molten iron, steel, or slag
Matthias Baldermann
- Co-author in Energy balance of the integrated route
Antoine BALLY
- Co-author in Numerical modelling and simulation of the rolling of large diameter bars
Stefano Baragiola
- Co-author in A simulation assessment of modifications of the water network of an electric arc furnace steelworks to allow wastewater reuse
Jacques BARBIER
- Co-author in Improvement of overall blast furnace performance after the revamping of the top charging system at ArcelorMittal Atlantique et Lorraine BF-2
Luca Barboni
- Co-author in A training framework for i.Process/Steel-RHF APC system
- Co-author in i.Process/Steel-RHF: An adaptive algorithm aimed at online optimization of re-heating furnaces
David Barchiesi (i.Process S.r.l.)
- Co-author in A training framework for i.Process/Steel-RHF APC system
- Co-author in i.Process/Steel-RHF: An adaptive algorithm aimed at online optimization of re-heating furnaces
Johan Barel (Danieli Corus BV)
- Co-author in Hot blast stove campaign extension repairs at operating temperature
Christian Bartels- von Varnbüler
- Author in Reactive PCI® technology - the next milestone in Küttner's comprehensive PCI know-how
Felipe Batista
- Co-author in BOF lance TIP mult nozzles coalescence trigonometric study
Felipe Batista
- Co-author in Aplication of the similarity method for cold modeling a 330 tons BOF converter in laboratory
Jean-Claude Baumert
- Co-author in Adaptation of CRM EAF model for 100% DRI charging and implementation at Lazaro-Cardenas plant
Frank Beddings
- Author in Latest PL-TCM technologies for advanced high strength steel applications
Neil Beever
- Co-author in Power system analysis of direct current electric arc funaces - SGL PRO ARC DC
Eddie BEGREM
- Co-author in Improvement of overall blast furnace performance after the revamping of the top charging system at ArcelorMittal Atlantique et Lorraine BF-2
Hannes Beile
- Author in Extended new overview of chemical injection systems at the EAF
- Co-author in Latest modernization developments for electric arc furnaces
Caterina Benigni
- Author in Zinc oxide from steel mill dust - A wide range of opportunities
Michele Benini
- Author in An agent based approach for steel industries for exploitation of opportunities and challenges provided by energy markets
Matthias Bergermann (Outotec)
- Co-author in OUTOTEC performance services for iron ore agglomeration plants
Matthias Bergermann
- Co-author in Outotec Solution for Pelletizing Plant Low Nox emission
Christian Bergins
- Co-author in Combined PtL and Use of by-product H2 in an integrated steel mill - Industrial symbiosis between chemical and steel industry
Martin Bergmann
- Author in Advanced roll-gap lubrication solutions in hot and cold rolling
- Co-author in Wear generation during cold strip rolling - a model based analysis
Alexander Bergs
- Co-author in SHARC - Shaft arc furnace - Minimized energy consumption, efficient scrap preheating and low conversion costs
Michela Bernardi
- Author in The modernization of a coking plant making use of “STATE-OF-THE-ART” technologies: A european case
Rainer Bertling
- Author in Improvement of environmental protection and energy savings by suitable material handling systems
Loïc Bertrand
- Author in Robust control of the lubrication in a hot rolling process
Kristina Beskow
- Author in GRANSHOT turns logistic challenge into valuable product in integrated steel making
Dieter Bettinger
- Author in DR plant process optimization with DRIpaxTM expert system
- Author in Holistic optimization models – recent developments in ironmaking process control
Anrin Bhattacharyya
- Author in Investigation of the specific surface area and pore structure of blast furnace sinters
Régis BIGOT
- Co-author in Numerical modelling and simulation of the rolling of large diameter bars
Johan Bijleveld
- Co-author in Multi-target optimization of batch annealing bays
Wolfgang Bilstein
- Co-author in Industrial applications of reliable topography measurements
Raffael Binder
- Co-author in The digitalization of steel production
David Binder
- Co-author in Custom fitted order dressing for metals industries
Bo Björkman
- Co-author in Investigating the oxidation kinetics of magnetite pellet
Johan Björkvall
- Co-author in Soft sensors for improved control of electric arc furnaces
Adam Blackmore
- Co-author in Explosions due to the entrapment of water by molten iron, steel, or slag
Wolfgang Bleck
- Author in Hot work tool steels strengthened by carbides and intermetallic phases
Jan Bloem (Danieli Corus BV)
- Co-author in Hot blast stove campaign extension repairs at operating temperature
Schaap Bob
- Co-author in Automation of hot metal pouring in our steel plant
Paolo Bobig (Danieli Wean United)
- Co-author in Danieli Universal Endless (DUE®) The new evolution of Danieli thin slab casting and rolling plant
Michaela Boeberl
- Author in Efficient and environmental friendly sinter-cooling based on the counter flow principle
- Co-author in Numerical simulation of sinter process and optimization of top burner system by CFD simulation
Christian Böhm (Primetals Technologies Austria GmbH)
- Co-author in Enhancing performance of integrated steel plant by combining FINEX® and blast furnace
Christian Böhm (Primetals Technologies Austria GmbH)
- Co-author in Future of direct reduction in Europe – Medium and long-term perspectives
Thomas Böhm
- Co-author in Inline measurement of electromagnetic parameters for characterization of material properties of steel strip with a focus on magnetic values
Luc BOIDIN
- Co-author in Improvement of overall blast furnace performance after the revamping of the top charging system at ArcelorMittal Atlantique et Lorraine BF-2
Stefan Born
- Author in Influence of injection of pre-reduced iron ores on the processes in the blast furnace raceway
Teresa Annunziata Branca
- Co-author in Modelling of basic oxygen furnace slag treatment and processing in order to evaluate possibility of their reuse
Jens Brandenburger
- Author in Performance supervision of automatic surface inspection systems
- Co-author in How-to optimize steel quality by applying Industry 4.0 techniques in real-world practical examples
- Co-author in The BFI-I4.0 solution modules for fully exploiting the digitization efforts of the European steel industry
Matthias Brenninger
- Co-author in Developing heat treat equipment for 3rd generation AHSS
Cees Brockhus
- Co-author in Automation of hot metal pouring in our steel plant
Christian Bruckner
- Co-author in Performance supervision of automatic surface inspection systems
Fritz Bruehl
- Author in Influences of the changed chemical composition of modern AHSS-grades on the pickling process
- Co-author in Galvanizing of 3rd generation AHSS-grades with PrOBOX®-technology and flexible thermal treatment
Christian Brunner
- Co-author in Briquetting of ferrous and coal fines – Saving resources, creating value
Daniel Buchberger
- Co-author in Design and optimization of iron ore pelletizing plants based on coupled numerical simulations
Christian Bucher
- Co-author in The journey of one square millimeter wire surface
Bruno Buchmayr
- Author in Challenges in the steel industry and consequences for rolling plant technologies
- Co-author in The journey of one square millimeter wire surface
Torsten Buddenberg
- Co-author in Combined PtL and Use of by-product H2 in an integrated steel mill - Industrial symbiosis between chemical and steel industry
Philip Bundschuh
- Co-author in Impact of carbon, silicon and manganese contents on the dissolution and melting behaviour of scrap in a dynamic BOF model
Paolo Burin
- Co-author in Operation of a DC EAF based meltshop connected to a weak electrical network: A feasibility study
John Busser
- Co-author in Hot blast superheating – A scalable technology to reduce coke consumption
Ian Cameron
- Co-author in Hot blast superheating – A scalable technology to reduce coke consumption
Marija Cancarevic
- Co-author in Valorisation of slag and by products from EAF-metallurgy – NoWASTE a feasible way to go?
Trong Son Cao
- Author in Numerical investigations of oil film thickness formation inside the roll-bite during cold rolling
Matteo Caruso
- Author in Process parameters for the production of steel roll-bonded multilayer plates and strips
Daniel Carvalho
- Author in TBM tuyeres arrangements and flow – comparison between BOF thyssenkrupp CSA and cold model
Daniel Carvalho
- Author in BOF blowing process challenges for high rate of iron ore pellet addition - Process development and results at TKCSA
- Author in BOF pressure effects over jet penetration at TKCSA
- Co-author in Aplication of the similarity method for cold modeling a 330 tons BOF converter in laboratory
Cristiano Castagnola
- Co-author in Hot blast stoves – Latest developments, assessment and lifetime extension
Herbert Castro
- Co-author in BOF blowing process challenges for high rate of iron ore pellet addition - Process development and results at TKCSA
German CATALA
- Co-author in A new practical engineering approach to improving the service sustainablility of copper staves in blast furnaces
Silvia Cateni
- Author in An agent based approach for steel industries for exploitation of opportunities and challenges provided by energy markets
Paulo Cetlin
- Co-author in TIP ance nozzle wear study at VALLOUREC BRAZIL BOF
Carlos Chacon
- Co-author in Adaptation of CRM EAF model for 100% DRI charging and implementation at Lazaro-Cardenas plant
Alain Challaye
- Co-author in Tangshan new #2 cold rolling mill complex to produce advanced high strength steels for automotive market
Chen-Yang Chang
- Co-author in Dynamic cooling control system of high strength steel wire rod
Feng Chang
- Co-author in Research on injection of COG in middle-upper part of COREX melter gasifier
Francis Charre
- Co-author in Stainless steel endless continuous cold rolling with X-HI® stands technology
Zhaoping Chen
- Author in Study of large size Ds type inclusions in bearing steel
Damien CHEVALIER
- Author in Numerical modelling and simulation of the rolling of large diameter bars
Min-Young Cho (POSCO Ltd.)
- Co-author in Enhancing performance of integrated steel plant by combining FINEX® and blast furnace
Myung Jong Cho
- Author in CEM® Process : the most efficient process for thin gauge products
myungho Cho
- Co-author in New designed long-life copper stave cooling system for blast furnace
Sang-Woo Choi (POSCO)
- Co-author in New designed long-life copper stave cooling system for blast furnace
Jayong Choi
- Co-author in Characteristics of ladle flow field by gas bubbling method
Sang-Woo CHOI
- Co-author in Analysis of copper stave breakage and restoration technology in Pohang no.4 Blast Furnace
Kyle Chomyn
- Co-author in Importance of thermocouple layout in blast furnace hearth refractory wear monitoring
Christoffer Christoffer Schmidt
- Co-author in Soft sensors for improved control of electric arc furnaces
Jea-Sook CHUNG
- Co-author in Concept, reference and performance of the CEM® technology
Jea Sook Chung
- Co-author in CEM® Process : the most efficient process for thin gauge products
Marek Cichonski (Minkon GmbH)
- Co-author in Measuring of liquid steel temperature in secondary metallurgy
Francesco Cocchioni
- Co-author in A training framework for i.Process/Steel-RHF APC system
- Co-author in i.Process/Steel-RHF: An adaptive algorithm aimed at online optimization of re-heating furnaces
Valentina Colla
- Author in An agent based approach for steel industries for exploitation of opportunities and challenges provided by energy markets
- Co-author in A simulation assessment of modifications of the water network of an electric arc furnace steelworks to allow wastewater reuse
- Co-author in Modelling of basic oxygen furnace slag treatment and processing in order to evaluate possibility of their reuse
- Co-author in Water process integration: Assessment of an ultrafiltration and reverse osmosis based treatment to regenerate coke-making area wastewater
Vitantonio Colucci
- Co-author in Modelling of basic oxygen furnace slag treatment and processing in order to evaluate possibility of their reuse
Antonio Comelli (Danieli Automation SpA)
- Co-author in Danieli intelligent system: a leap forward towards the intelligent plant
Alberto Conejo
- Author in Physical modeling of bottom gas injection in metallurgical ladles: Status and current challenges
Jochen Corts
- Co-author in An active actuator to eliminate chatter marks caused by self-exited vibrations in rolling mills without speed losses
Paul Coster
- Co-author in Automation of hot metal pouring in our steel plant
Frédéric COSTES
- Co-author in Improving the ingot quality by understanding the behavior of the mold flux during casting process using a 3D fluid/structure numerical simulation model
Matteo Crosti
- Co-author in Advantages of Axial Cyclone Vs inertial spark arresters along the EAF secondary ducts: field experience and future developments through CFD analysis
Marco Peter Cudicio
- Author in Advantages of Axial Cyclone Vs inertial spark arresters along the EAF secondary ducts: field experience and future developments through CFD analysis
Alain Daelman
- Co-author in 3D numerical model for gas and pulverized coal injection optimization
Essi Dahl
- Co-author in Evaluation of bio-coke strength and reactivity for blast furnace use
Anders Dahlin
- Co-author in Investigating the oxidation kinetics of magnetite pellet
Jérôme DAULMERIE
- Author in Improvement of overall blast furnace performance after the revamping of the top charging system at ArcelorMittal Atlantique et Lorraine BF-2
Michael Degner
- Co-author in Challenges in the steel industry and consequences for rolling plant technologies
Carlos De Los Santos
- Author in SmartFurnace system and ZoloSCAN off gas monitoring integration in Vallourec Star
Carl DE MARÉ
- Co-author in Carbon recycling at its best – Utilization of by-products from process-gas fermentation
Leonardo Demuner
- Co-author in BOF blowing process challenges for high rate of iron ore pellet addition - Process development and results at TKCSA
Hounlassiou Dieudonne
- Author in Digital reheating technolgy - New developments and benefits
Vladimir Dimitrijevic
- Co-author in Dynamic modeling of the converter off gas composition in the cooling stack
Caio Diniz
- Co-author in Aplication of the similarity method for cold modeling a 330 tons BOF converter in laboratory
Andrey Dmitriev
- Author in Blast furnace smelting of the titaniferous magnetite ores with the various content of titanium dioxide and quality of the agglomerated raw materials
Yusuke Dohi
- Author in New technique for coal size design based on unique thermoplasticity index
Hans-Peter Domels
- Co-author in Energy balance of the integrated route
Laurent Dorel
- Author in Hot flat product surface inspection - Latest developments
Jean-François Douce
- Co-author in Sinter-cooler process CFD modeling
Peter Drissen
- Author in Factors of influence during and after the electric steel making process: Characterization and optimization of electric arc furnace slag
Alexander Ebel
- Author in An agent based approach for steel industries for exploitation of opportunities and challenges provided by energy markets
- Co-author in How-to optimize steel quality by applying Industry 4.0 techniques in real-world practical examples
- Co-author in The BFI-I4.0 solution modules for fully exploiting the digitization efforts of the European steel industry
Jan Ebert
- Co-author in Influence of pre-treated biomass on the microstructure of metallurgical coke
Philipp Ebner
- Co-author in Newly developed combined abrasive cut-off and cold circular sawing machines for flexible applications in the steel and special metals industry
Martin W. Egger
- Author in Successful revamping of sublancemanipulators for the LD-converters at voestalpine Stahl Gmbh – safe of process time and availability
- Co-author in First operating experiences with post-combustion lances at BOF shop LD3
- Co-author in Secondary Metallurgy No. 4 - The answer to the future quality demands at voestalpine Stahl GmbH
Reinhard Ehrengruber
- Co-author in BOF process improvements by modern gas purging strategy and technology
Moritz Eickhoff
- Author in Macroscopic texture examination of huge polished micrograph sections for validation of remelting simulations
- Author in Process model development for reheating plants using simple numerical methods enhanced with CFD results
Roland Eisl
- Author in Design and optimization of iron ore pelletizing plants based on coupled numerical simulations
Aitor Elorriaga (PASEK MINERALES (BUSINESS DEVELOPMENT MANAGER))
- Author in Value in use of Pasek dunite improving the return sinter fines
Asmaa Eltawil
- Co-author in Unconventional reducing agents for sustainable blast furnace ironmaking
Edo Engel (Danieli Corus BV)
- Author in Hot blast stove campaign extension repairs at operating temperature
Edo Engel (Danieli Corus)
- Co-author in New top charging unit for Zaporizhstal
Fredrik Engström
- Co-author in Influence of basicity on chromium leaching of low alloy EAF slag
Mustafa ESMER
- Author in A new practical engineering approach to improving the service sustainablility of copper staves in blast furnaces
Antonio Esposito
- Co-author in The modernization of a coking plant making use of “STATE-OF-THE-ART” technologies: A european case
Jean-Louis EYMOND
- Co-author in Mathematical model dedicated to the diagnosis and optimization of blast furnace hot stove battery operation
Timo Fabritius
- Co-author in Analysis of time delay in heat transfer caused by slag accumulated on EAF side panels
- Co-author in Evaluation of bio-coke strength and reactivity for blast furnace use
- Co-author in In situ measurement of silicon content in molten ferrochrome
Rainer Fackert (IMS Messsysteme GmbH)
- Author in Topographic surface inspection system for slabs
Jean-Paul Faure (Primetals Technologies France SAS)
- Co-author in Hot flat product surface inspection - Latest developments
Jean-Paul Faure
- Co-author in Stainless steel endless continuous cold rolling with X-HI® stands technology
Edmund Fehringer
- Author in Numerical simulation of sinter process and optimization of top burner system by CFD simulation
- Co-author in Efficient and environmental friendly sinter-cooling based on the counter flow principle
Karsten Lothar Feiste
- Co-author in Inline measurement of electromagnetic parameters for characterization of material properties of steel strip with a focus on magnetic values
Mario Fennert
- Co-author in Practical user experience with an Industrie 4.0 electrode control system
T. Fenzl (Primetals Technologies Austria GmbH)
- Co-author in Sinter plant and basic oxygen furnace waste heat utilization – New configuration with ORC modules for power generation
Thomas Fenzl
- Author in Installation of a dry slag granulation pilot plant at blast furnace A of voestalpine
Guillermo Fernandez
- Author in Results in EAF Process optimization with AMIGE SmartFurnace system
Alessio Ferraris
- Co-author in The modernization of a coking plant making use of “STATE-OF-THE-ART” technologies: A european case
Rodolfo Paulo Santos Ferreira
- Author in 3D numerical model for gas and pulverized coal injection optimization
Sergei Filatov
- Co-author in Implementation and results of non-destructive testing method for cooling staves thicknesses at NLMK
Reinhard Fillafer
- Co-author in Innovative solutions for BOF dedusting systems – Achieving minimum emission levels
Andreas Filzwieser
- Co-author in Bypassing problems related to water cooling – Case study for applying ILTEC in an 100t EAF
Harald Fischer (Minkon GmbH)
- Co-author in Measuring of liquid steel temperature in secondary metallurgy
Bettina Fischer
- Author in Radar solutions for harsh environmental conditions
Sebastien Flament
- Author in Characterizations, modelling and lab trials assisting the development of a graphitic HSS work roll for rear finishing stands
Alexander Fleischanderl
- Co-author in Boosting the value of your steelmaking slag and dust
- Co-author in Carbon recycling at its best – Utilization of by-products from process-gas fermentation
Gianpaolo Foglio (Feralpi Siderurgica S.p.A.)
- Co-author in Activities for through process modelling and monitoring of steelmaking process to estimate and improve process performances and steel qualities
Alessandro Foresti
- Co-author in Sinter plant and basic oxygen furnace waste heat utilization – New configuration with ORC modules for power generation
Roberto Formage
- Co-author in BOF blowing process challenges for high rate of iron ore pellet addition - Process development and results at TKCSA
Lothar Formanek
- Co-author in Rotary kilns for direct reduction of iron ore: design, operational guidelines and troubleshooting based on complex mathematic modeling
Barbara Fornai
- Co-author in Water process integration: Assessment of an ultrafiltration and reverse osmosis based treatment to regenerate coke-making area wastewater
Rolf Franz
- Co-author in Severstal's revamp of their four stand flat cold tandem line in Cherepovets
Klaus Frauenhuber
- Co-author in A pioneering HSM side guide system eliminating strip defects at tremendously extended service life
Michiel Freislich
- Co-author in Improving operational efficiency and cost competiveness of steel plants - A case study for electric furnace melt shop and hot rolling mill
Jürgen Frick
- Co-author in Energy saving and process optimization in a conventional hot strip mill by application of the latest high-efficient descaling technology
gabriel fricout
- Author in Data mining continuous sensor data for training plant wide defect models
Harald Fritschek
- Co-author in Holistic optimization models – recent developments in ironmaking process control
Piero Frittella (Feralpi Siderurgica)
- Co-author in Activities for EAF Process Improvement to Acciaierie di Calvisano including KPI's approach for process monitoring and implementation of lime injection
- Co-author in Activities for through process modelling and monitoring of steelmaking process to estimate and improve process performances and steel qualities
Hagen Fuchs
- Author in Power system analysis of direct current electric arc funaces - SGL PRO ARC DC
Kiyoshi Fukada
- Co-author in New technique for coal size design based on unique thermoplasticity index
R. Fukuzawa (Hatch Ltd.)
- Co-author in Behaviour of Cs and Sr radionuclides during the electric arc re-melting of contaminated scraps
Hideaki Furumoto
- Co-author in Development of looper shape meter in hot rolling
- Co-author in Mill stabilizing device for reduction of mill vibration in hot rolling
Maurizio Fusato (Feralpi Siderurgica S.p.A.)
- Co-author in Activities for through process modelling and monitoring of steelmaking process to estimate and improve process performances and steel qualities
patrick gallinari
- Co-author in Data mining continuous sensor data for training plant wide defect models
Andreas Gantner (voestalpine Stahl GmbH)
- Author in Secondary Metallurgy No. 4 - The answer to the future quality demands at voestalpine Stahl GmbH
Xu Gao
- Co-author in Influence of interfacial tension and viscosity on the formation of metal emulsion by rising gas bubble.
Fabricio Garajau
- Co-author in BOF lance TIP mult nozzles coalescence trigonometric study
- Co-author in Continuous improvements in BOF at Arcelor Mittal João Monlevade by technology slagless lance
- Co-author in TIP ance nozzle wear study at VALLOUREC BRAZIL BOF
Fabricio Silveira Garajau (Lumar Metals Ltda)
- Co-author in Slagless technology - New BOF performances at GERDAU OURO BRANCO
Giuseppe Gatti
- Co-author in Operation of a DC EAF based meltshop connected to a weak electrical network: A feasibility study
Sa Ge
- Author in Behaviour of Cs and Sr radionuclides during the electric arc re-melting of contaminated scraps
Mark Geach
- Author in TSL KPO BF 1 – Design, commissioning and start-up
Claus Geiger
- Co-author in Challenges to the steel industry in the transformation process towards low-carbon economy at the example of voestalpine
Gianni Gensini
- Co-author in Operation of a DC EAF based meltshop connected to a weak electrical network: A feasibility study
Andrew Gerber
- Co-author in Explosions due to the entrapment of water by molten iron, steel, or slag
Uwe Gerike
- Co-author in Vacuum converter – Producing special steels and ferroalloys
Thomas Germershausen
- Co-author in SHARC - Shaft arc furnace - Minimized energy consumption, efficient scrap preheating and low conversion costs
Ghassan Ghazal
- Co-author in 3D numerical model for gas and pulverized coal injection optimization
Hamid Ghorbani
- Author in Importance of thermocouple layout in blast furnace hearth refractory wear monitoring
- Author in Temperature fluctuation impact on structural behavior of blast furnace hearth refractory system
Nils Giesselmann
- Co-author in Macroscopic texture examination of huge polished micrograph sections for validation of remelting simulations
Enzo Gigante
- Co-author in Operation of a DC EAF based meltshop connected to a weak electrical network: A feasibility study
Björn Glaser
- Co-author in Dynamic on-line monitoring and end point control of dephosphorisation in the BOF converter
Dominik Goebl
- Co-author in Holistic optimization models – recent developments in ironmaking process control
UDAY SHANKER GOEL
- Author in Understanding scale defect in Si bearing automotive grades manufactured through the CSP route at Tata Steel, Jamshedpur
Sebastian Gogolin
- Co-author in Adaptive EAF online control based on innovative sensors and comprehensive models
Yakov Gordon
- Co-author in Influence of sinter and pellets proportion and quality on blast furnaces operation
Frank Gorgels
- Co-author in X-Shape – high precision and cost-efficient flatness measurement and control
Alex Gorodetsky
- Co-author in Hot blast superheating – A scalable technology to reduce coke consumption
Uwe Gottschlich
- Co-author in Steel vacuum degassing mechanical pumping system without process gas filter: latest technical developments for reduction in CAPEX and OPEX
Basavan Goud Salagundi
- Co-author in OUTOTEC performance services for iron ore agglomeration plants
Stephane Gouttebroze (Primetals Technologies France SAS)
- Co-author in Stainless steel endless continuous cold rolling with X-HI® stands technology
Jacopo Greguoldo
- Co-author in Advantages of Axial Cyclone Vs inertial spark arresters along the EAF secondary ducts: field experience and future developments through CFD analysis
Georg Grimm (voestalpine Stahl GmbH)
- Co-author in Secondary Metallurgy No. 4 - The answer to the future quality demands at voestalpine Stahl GmbH
Simon Grosseiber (Primetals Technologies Austria GmbH)
- Co-author in Broadening the steel markets by direct application of high quality ESP strips
Markus Grüber
- Author in A feed-forward control for roller levelers using FE based process models and fast meta-models
Ansgar Gruess
- Co-author in New strip tension control for better thickness performance at finishing mills
Marcelo Guerra
- Co-author in BOF lance TIP mult nozzles coalescence trigonometric study
- Co-author in BOF pressure effects over jet penetration at TKCSA
- Co-author in Continuous improvements in BOF at Arcelor Mittal João Monlevade by technology slagless lance
- Co-author in Slagless technology - New BOF performances at GERDAU OURO BRANCO
- Co-author in TIP ance nozzle wear study at VALLOUREC BRAZIL BOF
Valentin Gunenkov
- Co-author in Improving operational efficiency and cost competiveness of steel plants - A case study for electric furnace melt shop and hot rolling mill
Sabine Gütgemann
- Co-author in Radar solutions for harsh environmental conditions
Juho Haapakangas
- Author in Evaluation of bio-coke strength and reactivity for blast furnace use
Richard Haas-Witmüss
- Co-author in Optimal mixing and granulation process for fine utilization in sinterplants
Christian Haberkorn (voestalpine Stahl GmbH)
- Co-author in A pioneering HSM side guide system eliminating strip defects at tremendously extended service life
Klaus Hack
- Co-author in Dynamic on-line monitoring and end point control of dephosphorisation in the BOF converter
Michael Haentjes
- Co-author in Influences of the changed chemical composition of modern AHSS-grades on the pickling process
Matthäus Haider
- Author in BOF process improvements by modern gas purging strategy and technology
Hesham Hanafy
- Co-author in Yield improvement at direct reduction plant, module-E by modifying oxide screen-mesh
Martina Hanel
- Author in Bypassing problems related to water cooling – Case study for applying ILTEC in an 100t EAF
Guenter Harp
- Author in Combined PtL and Use of by-product H2 in an integrated steel mill - Industrial symbiosis between chemical and steel industry
Christopher Harris (voestalpine Texas LLC)
- Co-author in Commissioning and first operation results of world largest voestalpine Texas Midrex HBI Plant
Franz Hartl
- Co-author in Fully automatic converter steelmaking
- Co-author in Off the beaten path: New condition monitoring applications in steel making
Arno Haschke
- Author in How technological advancements in proactive and predictive maintenance can increase the lifecycle of plant equipment
Manfred Haselgruebler
- Co-author in Carbon recycling at its best – Utilization of by-products from process-gas fermentation
S. Hattori (Hitachi Ltd.)
- Co-author in Development of advanced 20Hi split housing ZR-mill (HZ-mill) for stainless and electrical steel
Lionel HAUSEMER
- Co-author in Improvement of overall blast furnace performance after the revamping of the top charging system at ArcelorMittal Atlantique et Lorraine BF-2
Christoph Häusler
- Author in Chatter management today at cold rolling mills. Theoretical background, integration into Genius CM condition monitoring, link to plant automation
Markus Hautzer
- Co-author in Manufacturing execution systems MES 4.0 from SMS group
Vico Haverkamp
- Co-author in Adaptive EAF online control based on innovative sensors and comprehensive models
YASUKAZU HAYASAKA
- Co-author in Technology for improvement sinter productivity and sinter strength in the sintering process by gas fuel and oxygen injection technology ―Development of gas fuel and oxygen injection technology in iron ore sintering
Jean-Claude Hein
- Co-author in Rotary kilns for direct reduction of iron ore: design, operational guidelines and troubleshooting based on complex mathematic modeling
Mikko Helle
- Co-author in Steel plant integrated charcoal production from wood and kraft lignin – Feasible market conditions
Harald Henkemeyer
- Co-author in Performance supervision of automatic surface inspection systems
Olivier Herbiet
- Author in Early roll defects detection in roughing mill
Kurt Herzog
- Author in The digitalization of steel production
Tobias Heyd
- Co-author in Outotec Solution for Pelletizing Plant Low Nox emission
Bernhard Hiebl
- Co-author in Design and optimization of iron ore pelletizing plants based on coupled numerical simulations
Tsuyoshi Higo
- Co-author in FE analysis of influence of edge wave length on roller leveling effect
Hajime Higuchi
- Author in Development of advanced 20Hi split housing ZR-mill (HZ-mill) for stainless and electrical steel
Daisuke Hikino
- Author in Newly developed universal crown control mill “HYPER UCM” for rolling of high-hardness and thinner steel
Carsten Hillmann
- Co-author in New hearth design for blast furnace no. 3 at DK
Toshiyuki HIROSAWA
- Co-author in Technology for improvement sinter productivity and sinter strength in the sintering process by gas fuel and oxygen injection technology ―Development of gas fuel and oxygen injection technology in iron ore sintering
Gerhard Hirt
- Co-author in A feed-forward control for roller levelers using FE based process models and fast meta-models
- Co-author in Flatness characterisation of hot plates for plate levelling
Mario Hirth
- Author in Robotic guided tap hole maintenance on EAF, a major increase of worker safety
Tadashi Hiura
- Co-author in Mill stabilizing device for reduction of mill vibration in hot rolling
Helmut Hlobil
- Co-author in Inline measurement of electromagnetic parameters for characterization of material properties of steel strip with a focus on magnetic values
Karl Hoen
- Author in Concept, reference and performance of the CEM® technology
Stefan Hoetzinger
- Author in Briquetting of ferrous and coal fines – Saving resources, creating value
Mathias Hoffmann
- Co-author in Modelling and simulation of ignition hoods for iron ore sintering
Sven Hofmann
- Co-author in Practical user experience with an Industrie 4.0 electrode control system
Gerald Hohenbichler
- Co-author in Know-how based root-cause analysis tool to ensure high product quality and process stability
Matthias Hölscher (Minkon GmbH)
- Co-author in Online Measurement of dissolved gasses in secondary metallurgy
Norbert Holzknecht
- Co-author in How-to optimize steel quality by applying Industry 4.0 techniques in real-world practical examples
- Co-author in The BFI-I4.0 solution modules for fully exploiting the digitization efforts of the European steel industry
Michel HOUBART
- Co-author in Recycling of blast furnace sludge by hydrometallurgy process
Harald Huber-Kasberger
- Co-author in Briquetting of ferrous and coal fines – Saving resources, creating value
Pierre Hudon
- Co-author in Behaviour of Cs and Sr radionuclides during the electric arc re-melting of contaminated scraps
Greg D. Hughes
- Co-author in DR plant process optimization with DRIpaxTM expert system
Matias Hultgren
- Co-author in Analysis of time delay in heat transfer caused by slag accumulated on EAF side panels
Barry Hyde
- Co-author in Hot blast superheating – A scalable technology to reduce coke consumption
Joseph IEZZI
- Co-author in Improvement of overall blast furnace performance after the revamping of the top charging system at ArcelorMittal Atlantique et Lorraine BF-2
Topi Ikäheimonen
- Co-author in In situ measurement of silicon content in molten ferrochrome
VISENTINI INGRID
- Co-author in Automatic surface inspection in steel products ensures safe, cost efficient and timely defect detection in production
ANA-MARIA IOSIF
- Author in Recycling of blast furnace sludge by hydrometallurgy process
Natsuo Ishiwata
- Co-author in Control technique of coke rate in shaft furnace by controlling coke reactivity
Daniel ISLER
- Co-author in Detection of coal weathering
Yuki Iwai
- Author in Control technique of coke rate in shaft furnace by controlling coke reactivity
yuji Iwami
- Co-author in Technology for improvement sinter productivity and sinter strength in the sintering process by gas fuel and oxygen injection technology ―Development of gas fuel and oxygen injection technology in iron ore sintering
Shimoyama Izumi
- Co-author in New technique for coal size design based on unique thermoplasticity index
Nikolai Izumskiy
- Author in Mathematical model and stabilization system for slag mode of blast furnace operation
Leon Jacobs
- Co-author in Hot strip mill roll gap lubrication with low cost green oils and waste oils
Robert Jäger
- Author in The KPI-driven and agile metals supply chain
Vladislav JANECEK
- Co-author in Mathematical model dedicated to the diagnosis and optimization of blast furnace hot stove battery operation
Rizwan JANJUA
- Co-author in A new practical engineering approach to improving the service sustainablility of copper staves in blast furnaces
Björn JANSSON
- Co-author in A new practical engineering approach to improving the service sustainablility of copper staves in blast furnaces
Olivier JAOUEN
- Author in Improving the ingot quality by understanding the behavior of the mold flux during casting process using a 3D fluid/structure numerical simulation model
Mika P. Jarvinen
- Co-author in Steel plant integrated charcoal production from wood and kraft lignin – Feasible market conditions
EUNJU JEONG
- Author in Characteristics of ladle flow field by gas bubbling method
Ding Jian Lv (Rizhao Steel Holding Group Co., LTD.)
- Co-author in Identifying the blast furnace salamander position by using non-destructive testing (NDT) techniques
TETSUYA JINNO
- Co-author in Technology for improvement sinter productivity and sinter strength in the sintering process by gas fuel and oxygen injection technology ―Development of gas fuel and oxygen injection technology in iron ore sintering
Hasai Jiro
- Author in Mill stabilizing device for reduction of mill vibration in hot rolling
Martin Jochum
- Co-author in Flatness characterisation of hot plates for plate levelling
Mikko Jokinen
- Co-author in Analysis of time delay in heat transfer caused by slag accumulated on EAF side panels
Kees Jonker
- Co-author in Performance supervision of automatic surface inspection systems
Nils-Göran Jonsson
- Co-author in Measurements of contact, friction and heat transfer during rolling
In-Ho Jung
- Co-author in Behaviour of Cs and Sr radionuclides during the electric arc re-melting of contaminated scraps
Andreas Jungbauer
- Author in ARVEDI ESP: The technological contribution for performance optimization
Alexander Kainz
- Co-author in Wear generation during cold strip rolling - a model based analysis
Rainer Kaiser
- Co-author in Advanced HSS grades – Key material for rolling of steel with high efficiency
Anssi Källi
- Co-author in Steel plant integrated charcoal production from wood and kraft lignin – Feasible market conditions
Susumu Kamikawa
- Co-author in Efficient and environmental friendly sinter-cooling based on the counter flow principle
Shinya Kanemori
- Co-author in Development of looper shape meter in hot rolling
- Co-author in Mill stabilizing device for reduction of mill vibration in hot rolling
Yenal Karateke
- Co-author in Multi-target optimization of batch annealing bays
Ramesh Katakam (SABIC - Metals)
- Co-author in Utilization of olefin plants waste coke as carbon additive in steel making
Matthias Katzmayr
- Co-author in A pioneering HSM side guide system eliminating strip defects at tremendously extended service life
Rudolf Kawalla
- Co-author in Opportunities of experimental and numerical simulation of steel rolling technologies at the Institute of Metal Forming of TU Bergakademie Freiberg
Andreas Kemminger
- Author in CFD simulation of multiphase melt flows in metallurgical reactors
- Co-author in CFD modeling of standard and shaft-type Electric Arc Furnaces
- Co-author in Proportional Oxygen Burner - A light, multipurpose burner for metallurgical applications
Jens Kempken
- Author in PQA-the success factor to reach next performance level in hot and cold rolling
Antti Kemppainen
- Co-author in Evaluation of bio-coke strength and reactivity for blast furnace use
Andreas Keplinger (Primetals Technologies Austria GmbH)
- Co-author in Robotic guided tap hole maintenance on EAF, a major increase of worker safety
T. Keplinger (Technical University Vienna)
- Co-author in Waste heat recovery for EAF – Innovative concepts & industrial implementation
Sabrine Khadhraoui
- Co-author in Dynamic on-line monitoring and end point control of dephosphorisation in the BOF converter
Bruce Kiefer (Primetals Technologies USA LLC)
- Co-author in Modernization of the Kroman wire rod mill to increase productivity, utilization and product quality
Tatsuya Kikuchi
- Co-author in New discrete element simulation for trickle flow in blast furnace
Sun-Joong Kim
- Co-author in Influence of interfacial tension and viscosity on the formation of metal emulsion by rising gas bubble.
Tae-Sun KIM
- Co-author in Analysis of copper stave breakage and restoration technology in Pohang no.4 Blast Furnace
Yong-Hwan Kim
- Co-author in Characteristics of ladle flow field by gas bubbling method
Jungil Kim
- Author in New designed long-life copper stave cooling system for blast furnace
Jijoon Kim
- Co-author in Characteristics of ladle flow field by gas bubbling method
Jan-Won Kim (Material Science and Engineering, Inha University)
- Co-author in New designed long-life copper stave cooling system for blast furnace
Keun Young KIM
- Author in Analysis of copper stave breakage and restoration technology in Pohang no.4 Blast Furnace
Seong Yeon Kim
- Co-author in CEM® Process : the most efficient process for thin gauge products
Ryohei Kinose
- Co-author in Development of looper shape meter in hot rolling
Ruth Kirkwood-Azmat
- Co-author in Rolling into the future by digitalization
Marcus Kirschen
- Co-author in BOF process improvements by modern gas purging strategy and technology
Shin-ya Kitamura
- Author in Influence of interfacial tension and viscosity on the formation of metal emulsion by rising gas bubble.
Stefan Klanke
- Co-author in Advanced data-driven prediction models for BOF end-point detection
Bernd Kleimt
- Author in Real time sensing, dynamic modelling and advanced control of melt temperature in liquid steelmaking
- Co-author in Adaptive EAF online control based on innovative sensors and comprehensive models
- Co-author in Dynamic on-line monitoring and end point control of dephosphorisation in the BOF converter
Christopher Klein (SMS group GmbH)
- Co-author in Performance Modules – a convenient and sophisticated way for hot rolling mills
Christian Klein
- Author in State of the art gas cleaning and utilization for BOF gases: operational results and benefits
Christoph Klein
- Co-author in Concept, reference and performance of the CEM® technology
Werner Klein (Primetals Technologies Germany GmbH)
- Author in Valuable principles for effective planning & scheduling: A holistic approach
Angelika Klinger
- Co-author in DR plant process optimization with DRIpaxTM expert system
Jutta Klöwer
- Co-author in Macroscopic texture examination of huge polished micrograph sections for validation of remelting simulations
Ronald Knecht
- Author in Risk assessment for lubricants in use in steel plants. How fire resistant lubricants improve work safety and reduce fire hazard in steel plants
Mike Knights (Danieli Centro Met)
- Co-author in Danieli Universal Endless (DUE®) The new evolution of Danieli thin slab casting and rolling plant
Herbert Köchner (ASenso GmbH Advanced Sensor Solutions)
- Co-author in Real time sensing, dynamic modelling and advanced control of melt temperature in liquid steelmaking
Irmela Kofler
- Co-author in A combined data processing approach to improve blast furnace raceway blockage detection
Andreas Kogler
- Co-author in Performance supervision of automatic surface inspection systems
Thomas Kohl
- Author in Steel plant integrated charcoal production from wood and kraft lignin – Feasible market conditions
Saori Konno
- Author in Influence of kind and particle size of semi-soft coking coals on dilatation of blended coal
Alois Koppler
- Author in Inline measurement of electromagnetic parameters for characterization of material properties of steel strip with a focus on magnetic values
Tobias Kordel
- Co-author in Adaptive EAF online control based on innovative sensors and comprehensive models
- Co-author in Real time sensing, dynamic modelling and advanced control of melt temperature in liquid steelmaking
Daniel Kotzian
- Author in New strip tension control for better thickness performance at finishing mills
Mingyin Kou
- Co-author in Research on injection of COG in middle-upper part of COREX melter gasifier
Christian Koubek
- Co-author in Practical user experience with an Industrie 4.0 electrode control system
Hagen Krambeer
- Co-author in Performance supervision of automatic surface inspection systems
Stephan Krämer
- Author in Performance Modules – a convenient and sophisticated way for hot rolling mills
- Co-author in Concept, reference and performance of the CEM® technology
Fabian Krause
- Author in Proportional Oxygen Burner - A light, multipurpose burner for metallurgical applications
Fabian Krause
- Co-author in CFD modeling of standard and shaft-type Electric Arc Furnaces
Horst Krauthäuser
- Co-author in Radar solutions for harsh environmental conditions
Christian Krebs
- Co-author in Radar solutions for harsh environmental conditions
Wade Krejdovsky
- Author in Modernization of the Kroman wire rod mill to increase productivity, utilization and product quality
Konrad Krimpelstätter
- Co-author in Advanced roll-gap lubrication solutions in hot and cold rolling
- Co-author in Tangshan new #2 cold rolling mill complex to produce advanced high strength steels for automotive market
- Co-author in Wear generation during cold strip rolling - a model based analysis
Adepu M Krishna
- Co-author in Identification of peritectic grades of steel using high temperature phase transformation studies
Jürgen Krüger
- Co-author in Advanced HSS grades – Key material for rolling of steel with high efficiency
Matthias Krüger (SMS group GmbH)
- Co-author in Chatter management today at cold rolling mills. Theoretical background, integration into Genius CM condition monitoring, link to plant automation
Michael Krump
- Co-author in Practical user experience with an Industrie 4.0 electrode control system
Yukihiro Kubota
- Co-author in Influence of kind and particle size of semi-soft coking coals on dilatation of blended coal
Sunil Kumar
- Author in Improving operational efficiency and cost competiveness of steel plants - A case study for electric furnace melt shop and hot rolling mill
RAJESH KUMAR
- Co-author in Understanding scale defect in Si bearing automotive grades manufactured through the CSP route at Tata Steel, Jamshedpur
Tarun Kumar Kundu
- Co-author in Mathematical model to simulate liquid metal & slag accumulation, drainage and heat transfer in blast furnace hearth
Luc Kuntzler
- Co-author in Sinter-cooler process CFD modeling
Gerhard Kurka
- Author in Know-how based root-cause analysis tool to ensure high product quality and process stability
- Co-author in The digitalization of steel production
Ivan Kurunov
- Co-author in Implementation and results of non-destructive testing method for cooling staves thicknesses at NLMK
Vladislav Kushnarev
- Co-author in AU-E control of blast furnace refractory lining at NTMK-EVRAZ ensures intensive operation and prediction of the end of campaign of titania blast furnace.
Niels Kyewski
- Co-author in Introduction of a 3D-laserprofile-measurement-system that is immersed in to a hot steel casting ladle to measure and evaluate the entire conditions of the refractory lining including optimization of lining and ladle treatment, gap and crack detection, lining surface temperature and automated sand filling of the ladle-taphole.
Daniela Ladeira
- Co-author in Aplication of the similarity method for cold modeling a 330 tons BOF converter in laboratory
Daniela Ladeira
- Author in TBM tuyeres arrangements and flow – comparison between BOF thyssenkrupp CSA and cold model
Jonas Lagergren
- Co-author in Measurements of contact, friction and heat transfer during rolling
Alberto Lainati
- Co-author in Forging-like rolling with high reduction of SBQ long products
- Co-author in The production of railway rails in modern and efficient plants - The new ARBZ rail mill
Rolf Lamm
- Author in Introduction of a 3D-laserprofile-measurement-system that is immersed in to a hot steel casting ladle to measure and evaluate the entire conditions of the refractory lining including optimization of lining and ladle treatment, gap and crack detection, lining surface temperature and automated sand filling of the ladle-taphole.
Torsten Lamp (Minkon GmbH)
- Author in Measuring of liquid steel temperature in secondary metallurgy
- Co-author in Online Measurement of dissolved gasses in secondary metallurgy
Thorsten Lamp (Minkon Sp. z.o.o.)
- Co-author in Real time sensing, dynamic modelling and advanced control of melt temperature in liquid steelmaking
Andrea Lanari
- Author in EAF double probe extraction system for off-gas analysis: the SMS group’s cornerstone for EAF process optimization solutions – The synergy program
- Co-author in Technical update on the SMS group automatic slag door condoor: lessons learned and results achieved in 7 years of experience
Laurent LANGLOIS
- Co-author in Numerical modelling and simulation of the rolling of large diameter bars
Maxime Laugier
- Co-author in Numerical investigations of oil film thickness formation inside the roll-bite during cold rolling
Marvin Laugwitz
- Author in Flatness characterisation of hot plates for plate levelling
Max Dieter Laumann
- Co-author in Rotary kilns for direct reduction of iron ore: design, operational guidelines and troubleshooting based on complex mathematic modeling
Vladislav Lavrov
- Co-author in Influence of sinter and pellets proportion and quality on blast furnaces operation
Klaus Lazzaro (SMS group GmbH)
- Co-author in Performance Modules – a convenient and sophisticated way for cold rolling mills
Sang-Beom Lee
- Co-author in Characteristics of ladle flow field by gas bubbling method
Sang Hyeon Lee
- Co-author in CEM® Process : the most efficient process for thin gauge products
jean-baptiste leger
- Co-author in Data mining continuous sensor data for training plant wide defect models
Michael Legge (SMS group GmbH)
- Author in Performance Modules – a convenient and sophisticated way for cold rolling mills
Joachim Lehner
- Author in First operating experiences with post-combustion lances at BOF shop LD3
- Co-author in Successful revamping of sublancemanipulators for the LD-converters at voestalpine Stahl Gmbh – safe of process time and availability
Olivier Lemaire
- Co-author in Characterizations, modelling and lab trials assisting the development of a graphitic HSS work roll for rear finishing stands
Stefan Lemke
- Co-author in Vacuum converter – Producing special steels and ferroalloys
Thomas Lengauer
- Co-author in ARVEDI ESP: The technological contribution for performance optimization
- Co-author in Broadening the steel markets by direct application of high quality ESP strips
WILLIAN LIMA
- Author in Analysis of geometrical aspects of BOF coverters and correlations with process parameters
- Co-author in Aplication of the similarity method for cold modeling a 330 tons BOF converter in laboratory
- Co-author in BOF lance TIP mult nozzles coalescence trigonometric study
- Co-author in Continuous improvements in BOF at Arcelor Mittal João Monlevade by technology slagless lance
Gabby Limpens
- Co-author in Multi-target optimization of batch annealing bays
Yi-Ying Lin
- Co-author in Dynamic cooling control system of high strength steel wire rod
Kuan-Hao Lin
- Co-author in Investigation of through-thickness texture of a 1.24% Si electrical steel
QI LINLEI
- Co-author in Broadening the steel markets by direct application of high quality ESP strips
Bernd Linzer
- Author in Broadening the steel markets by direct application of high quality ESP strips
- Co-author in ARVEDI ESP: The technological contribution for performance optimization
Jiang Liu
- Co-author in Influence of interfacial tension and viscosity on the formation of metal emulsion by rising gas bubble.
Wei Lo
- Co-author in Recent applications of the MULPIC® plate cooling technology
Viktor A. Lobachev (Yandex Data Factory)
- Author in Optimization of ferroalloy use in the BOF process using machine learning methods
Roberto Loddo
- Co-author in The modernization of a coking plant making use of “STATE-OF-THE-ART” technologies: A european case
Mike Loepke
- Co-author in Advanced data-driven prediction models for BOF end-point detection
- Co-author in Indoor positioning of steel ladles using beacons
Johannes Lohmar
- Co-author in Flatness characterisation of hot plates for plate levelling
Moritz Loos
- Co-author in An active actuator to eliminate chatter marks caused by self-exited vibrations in rolling mills without speed losses
- Co-author in Economic impact maximization and throughput increase by decentral self-optimization of a pickling line
Marcos Lopes
- Co-author in Enhancement of the EAF dust recycling in self-reducing briquettes by controlling their hydration behaviour
Francisco Lopez
- Co-author in Adaptation of CRM EAF model for 100% DRI charging and implementation at Lazaro-Cardenas plant
Samira Lotfian
- Co-author in Unconventional reducing agents for sustainable blast furnace ironmaking
Michael Lowry
- Co-author in Adaptation of CRM EAF model for 100% DRI charging and implementation at Lazaro-Cardenas plant
Ruben Lule
- Co-author in Adaptation of CRM EAF model for 100% DRI charging and implementation at Lazaro-Cardenas plant
Hans-Bodo Lüngen
- Author in Ironmaking in Western Europe
Mathias Lüttenberg
- Co-author in Indoor positioning of steel ladles using beacons
Yuriy Lytvynyuk
- Author in Dynamic modeling of the converter off gas composition in the cooling stack
Robert Maduta
- Co-author in Outotec Solution for Pelletizing Plant Low Nox emission
Ichiro Maeno
- Co-author in Latest PL-TCM technologies for advanced high strength steel applications
Renato Maestri (Feralpi Siderurgica S.p.A.)
- Co-author in Activities for EAF Process Improvement to Acciaierie di Calvisano including KPI's approach for process monitoring and implementation of lime injection
VINAY V. MAHASHABDE
- Co-author in Understanding scale defect in Si bearing automotive grades manufactured through the CSP route at Tata Steel, Jamshedpur
Breno Maia
- Author in Analysis of geometrical aspects of BOF coverters and correlations with process parameters
- Author in Aplication of the similarity method for cold modeling a 330 tons BOF converter in laboratory
- Author in BOF cold model - Metal slag bath mass movement determination by supersonic blow from multi nozzles
- Author in BOF lance TIP mult nozzles coalescence trigonometric study
- Author in Continuous improvements in BOF at Arcelor Mittal João Monlevade by technology slagless lance
- Author in TIP ance nozzle wear study at VALLOUREC BRAZIL BOF
Andreas Maierhofer
- Co-author in Stainless steel endless continuous cold rolling with X-HI® stands technology
- Co-author in The digitalization of steel production
Josef Maierl
- Co-author in The most unique hot strip mill in the world
Sebastien Maillard
- Author in Stainless steel endless continuous cold rolling with X-HI® stands technology
- Co-author in Hot flat product surface inspection - Latest developments
- Co-author in Tangshan new #2 cold rolling mill complex to produce advanced high strength steels for automotive market
Jurgen Malbrancke
- Author in Introduction of tablets for work roll evaluation
Majid Maleki
- Co-author in Temperature fluctuation impact on structural behavior of blast furnace hearth refractory system
Raffael Mancini
- Author in Industrial application of blast furnace liquid levels measurements using strain gauges
Shuji Maniwa
- Co-author in Development of looper shape meter in hot rolling
Elias Mansour
- Co-author in Early roll defects detection in roughing mill
Xiaoming Mao
- Co-author in Operation and maintenance technology for prolong campaign life of large blast furnace hearth
Francesca Marchiori
- Author in An agent based approach for steel industries for exploitation of opportunities and challenges provided by energy markets
- Co-author in How-to optimize steel quality by applying Industry 4.0 techniques in real-world practical examples
OMETTO MARCO
- Author in Danieli intelligent system: a leap forward towards the intelligent plant
Appio Marco
- Author in Automatic surface inspection in steel products ensures safe, cost efficient and timely defect detection in production
- Author in HiPROFILE innovative defect detection package to increase production quality
Gianfranco Marconi
- Co-author in Dynamic modeling of the converter off gas composition in the cooling stack
Hans-Peter Markus
- Author in Factors of influence during and after the electric steel making process: Characterization and optimization of electric arc furnace slag
Jan Martens
- Co-author in Comprehensive competence in beneficiation technologies – from the raw materials to steel
Paul Martin
- Co-author in Stainless steel endless continuous cold rolling with X-HI® stands technology
FINSET MARTIN
- Co-author in Danieli intelligent system: a leap forward towards the intelligent plant
Franck MARTIN
- Co-author in Improvement of overall blast furnace performance after the revamping of the top charging system at ArcelorMittal Atlantique et Lorraine BF-2
JAVIER MARTINEZ
- Author in Dunite patch for slagdoor and hearth lining EAF
- Author in Value in use of Pasek dunite improving the return sinter fines
- Author in Value in use of pasek dunite in the BOF process
- Co-author in Torpedo ladle: Monolithic lining improvements
José David Martínez Cerezo
- Co-author in Development of high quality grades production techniques using a VOD plant at voestalpine Giesserei Linz
Victoria Masaguer Torres
- Co-author in Hot strip mill roll gap lubrication with low cost green oils and waste oils
TOMOTSUGO MASUDA
- Co-author in Towards a cleaner future - Trends in gas cleaning technology for ironmaking
Eliette Mathey
- Author in A fast model to evaluate threading refusal risk in hot rolling process
Ismael Matino
- Author in A simulation assessment of modifications of the water network of an electric arc furnace steelworks to allow wastewater reuse
- Author in Modelling of basic oxygen furnace slag treatment and processing in order to evaluate possibility of their reuse
- Author in Water process integration: Assessment of an ultrafiltration and reverse osmosis based treatment to regenerate coke-making area wastewater
Takashi Matsui
- Co-author in New technique for coal size design based on unique thermoplasticity index
Hidetoshi Matsuno
- Co-author in Control technique of coke rate in shaft furnace by controlling coke reactivity
Tim Mattern
- Author in Risk assessment for lubricants in use in steel plants. How fire resistant lubricants improve work safety and reduce fire hazard in steel plants
Stanislas Mauuary
- Co-author in Industrial results obtained with the new generation of laser welder
Anna Mayrhofer
- Author in Off the beaten path: New condition monitoring applications in steel making
Siegbert Mehlau
- Co-author in Advanced HSS grades – Key material for rolling of steel with high efficiency
Andreas Meier-Hedde
- Co-author in Optimal mixing and granulation process for fine utilization in sinterplants
Andreas Meier-Hedde
- Co-author in OUTOTEC performance services for iron ore agglomeration plants
Jose Mendoza
- Co-author in Adaptation of CRM EAF model for 100% DRI charging and implementation at Lazaro-Cardenas plant
Myriam Mensing
- Co-author in Product driven project methodology put into practice – how to implement a production management system for a plate mill line within 6 months
Gary Metius (Midrex Technologies Inc.)
- Co-author in Future of direct reduction in Europe – Medium and long-term perspectives
Andreas Metzen
- Author in SHARC - Shaft arc furnace - Minimized energy consumption, efficient scrap preheating and low conversion costs
Matthias Meyn
- Co-author in State of the art gas cleaning and utilization for BOF gases: operational results and benefits
Naoto Migakida
- Author in Development of looper shape meter in hot rolling
Giuseppe Miglietta (Feralpi Siderurgica S.p.A.)
- Co-author in Activities for EAF Process Improvement to Acciaierie di Calvisano including KPI's approach for process monitoring and implementation of lime injection
Gilles Millérioux
- Co-author in Robust control of the lubrication in a hot rolling process
Stuart Millman (Materiasl Processing Institute (MPI))
- Author in On-line measurement of steel cleanness using rapid inclusion characterisation techniques
Robert Milner
- Author in Future of direct reduction in Europe – Medium and long-term perspectives
- Co-author in Commissioning and first operation results of world largest voestalpine Texas Midrex HBI Plant
Mauro Milocco
- Author in Steel vacuum degassing mechanical pumping system without process gas filter: latest technical developments for reduction in CAPEX and OPEX
- Author in Technical update on the SMS group automatic slag door condoor: lessons learned and results achieved in 7 years of experience
- Co-author in EAF double probe extraction system for off-gas analysis: the SMS group’s cornerstone for EAF process optimization solutions – The synergy program
Byeoung Jin Min
- Co-author in CEM® Process : the most efficient process for thin gauge products
Konstantin Mironov
- Co-author in AU-E control of blast furnace refractory lining at NTMK-EVRAZ ensures intensive operation and prediction of the end of campaign of titania blast furnace.
Wolf Mißmahl
- Co-author in Performance supervision of automatic surface inspection systems
Christian Mittag (IMS Messsysteme GmbH)
- Co-author in Topographic surface inspection system for slabs
claudio mocci
- Co-author in Data mining continuous sensor data for training plant wide defect models
GUY MONFORT
- Author in Cleanliness measurement and control using innovative LIBS method
- Co-author in Review of CRM sensors usable for improved coated products
Peter Monheim
- Co-author in Dynamic on-line monitoring and end point control of dephosphorisation in the BOF converter
Kihyeon Moon
- Co-author in New designed long-life copper stave cooling system for blast furnace
Nicola Mora (Feralpi Siderurgica S.p.A.)
- Co-author in Activities for EAF Process Improvement to Acciaierie di Calvisano including KPI's approach for process monitoring and implementation of lime injection
Genevieve MOREAS
- Author in Industrial applications of reliable topography measurements
- Author in Optimisation of zinc coating using shape, position and vibrations high precision system
- Author in Review of CRM sensors usable for improved coated products
- Co-author in Cleanliness measurement and control using innovative LIBS method
- Co-author in Early roll defects detection in roughing mill
Maxime Moreau
- Author in Sinter-cooler process CFD modeling
Dione Moreira
- Co-author in TIP ance nozzle wear study at VALLOUREC BRAZIL BOF
John Moreland
- Co-author in Using numerical simulation and virtual reality visualization for steelmaking applications
Christian Moretto
- Co-author in Robust control of the lubrication in a hot rolling process
Friedrich Moser
- Author in A pioneering HSM side guide system eliminating strip defects at tremendously extended service life
Sina Mostaghel
- Co-author in Behaviour of Cs and Sr radionuclides during the electric arc re-melting of contaminated scraps
Elsayed Mousa
- Co-author in Unconventional reducing agents for sustainable blast furnace ironmaking
Dirk Mudersbach
- Author in Factors of influence during and after the electric steel making process: Characterization and optimization of electric arc furnace slag
Adreas Munko (Outotec)
- Co-author in Outotec Solution for Pelletizing Plant Low Nox emission
Jochen Munz
- Co-author in Energy saving and process optimization in a conventional hot strip mill by application of the latest high-efficient descaling technology
Ryota Murai
- Co-author in Control technique of coke rate in shaft furnace by controlling coke reactivity
Roberto MUSANTE
- Co-author in A new practical engineering approach to improving the service sustainablility of copper staves in blast furnaces
Giuseppe Muscara
- Co-author in Forging-like rolling with high reduction of SBQ long products
Klaus MUTSCHLER
- Co-author in Improvement of overall blast furnace performance after the revamping of the top charging system at ArcelorMittal Atlantique et Lorraine BF-2
Prabhakar NAIR
- Co-author in Carbon recycling at its best – Utilization of by-products from process-gas fermentation
Yukio Nakajima
- Co-author in Newly developed universal crown control mill “HYPER UCM” for rolling of high-hardness and thinner steel
Takafumi Nakaya
- Author in Development of new mash seam welder (Cross Seam Welder, CSW) for carbon steel pickling line
- Author in i Box pickling tanks for production improvement of advanced high strength steel upgraded from deep bath tank
Isamu Nakayama
- Co-author in Newly developed universal crown control mill “HYPER UCM” for rolling of high-hardness and thinner steel
Yongho Nam
- Co-author in New designed long-life copper stave cooling system for blast furnace
Jose Manuel Naranjo-Espinosa
- Author in Assessing the effect of two different deoxidation practices on non-metallic inclusions and mechanical properties and their evolution with thermomechanical processing.
Jessy NARBO
- Co-author in Detection of coal weathering
Afchine Nasserian
- Co-author in Hot flat product surface inspection - Latest developments
Shungo Natsui
- Author in New discrete element simulation for trickle flow in blast furnace
Oleksandr Nechyporuk
- Co-author in 3D numerical model for gas and pulverized coal injection optimization
Jun Negami
- Author in FE analysis of influence of edge wave length on roller leveling effect
Kirill O. Neklyudov (Yandex Data Factory)
- Co-author in Optimization of ferroalloy use in the BOF process using machine learning methods
Jochen Neuer
- Co-author in Manufacturing execution systems MES 4.0 from SMS group
Marcus J. Neuer
- Author in An agent based approach for steel industries for exploitation of opportunities and challenges provided by energy markets
- Author in Economic impact maximization and throughput increase by decentral self-optimization of a pickling line
- Author in How-to optimize steel quality by applying Industry 4.0 techniques in real-world practical examples
- Author in The BFI-I4.0 solution modules for fully exploiting the digitization efforts of the European steel industry
- Co-author in Data mining continuous sensor data for training plant wide defect models
Robert Neuhold
- Co-author in Installation of a dry slag granulation pilot plant at blast furnace A of voestalpine
Quang Tien Ngo
- Co-author in A fast model to evaluate threading refusal risk in hot rolling process
Mark Nicholls
- Co-author in Hot strip mill roll gap lubrication with low cost green oils and waste oils
Adrien NICOLETIS
- Co-author in Mathematical model dedicated to the diagnosis and optimization of blast furnace hot stove battery operation
Albert Niel
- Co-author in Real-time 3D reconstruction and defect detection on hot-rolled steel products based on the laser-light-section method
Annika Nilsson
- Author in Measurements of contact, friction and heat transfer during rolling
Hannes Nogratnig
- Co-author in Successful revamping of sublancemanipulators for the LD-converters at voestalpine Stahl Gmbh – safe of process time and availability
Caio Nogueira Diniz
- Author in TBM tuyeres arrangements and flow – comparison between BOF thyssenkrupp CSA and cold model
- Co-author in BOF cold model - Metal slag bath mass movement determination by supersonic blow from multi nozzles
Seiji Nomura
- Co-author in Influence of kind and particle size of semi-soft coking coals on dilatation of blended coal
Takashi Norikura
- Co-author in Development of advanced 20Hi split housing ZR-mill (HZ-mill) for stainless and electrical steel
Michael Nörtersheuser
- Co-author in Performance supervision of automatic surface inspection systems
Viswanathan Nurni
- Co-author in Investigating the oxidation kinetics of magnetite pellet
Dirk Nüssler
- Co-author in Radar solutions for harsh environmental conditions
Pierre Nyssen (CRM group)
- Co-author in Adaptation of CRM EAF model for 100% DRI charging and implementation at Lazaro-Cardenas plant
Hans-Jürgen Odenthal
- Author in CFD modeling of standard and shaft-type Electric Arc Furnaces
- Co-author in Advanced data-driven prediction models for BOF end-point detection
- Co-author in CFD simulation of multiphase melt flows in metallurgical reactors
Hanspeter Ofner
- Co-author in Briquetting of ferrous and coal fines – Saving resources, creating value
- Co-author in Commissioning and first operation results of world largest voestalpine Texas Midrex HBI Plant
- Co-author in Future of direct reduction in Europe – Medium and long-term perspectives
Futoshi Ogasawara
- Co-author in Improvement of productivity for ultra-low carbon grade of Cr base ferrite stainless steel
Ko-ichiro Ohno
- Co-author in New discrete element simulation for trickle flow in blast furnace
Claudio Ojeda
- Co-author in Adaptation of CRM EAF model for 100% DRI charging and implementation at Lazaro-Cardenas plant
Tyamo Okosun
- Co-author in Using numerical simulation and virtual reality visualization for steelmaking applications
Marius Oligschläger
- Co-author in A feed-forward control for roller levelers using FE based process models and fast meta-models
Dayvison Oliveira
- Co-author in Continuous improvements in BOF at Arcelor Mittal João Monlevade by technology slagless lance
Manoel Oliveira
- Co-author in Slagless technology - New BOF performances at GERDAU OURO BRANCO
Oleg Onorin
- Author in AU-E control of blast furnace refractory lining at NTMK-EVRAZ ensures intensive operation and prediction of the end of campaign of titania blast furnace.
- Author in Influence of sinter and pellets proportion and quality on blast furnaces operation
- Co-author in Identifying the blast furnace salamander position by using non-destructive testing (NDT) techniques
- Co-author in Implementation and results of non-destructive testing method for cooling staves thicknesses at NLMK
- Co-author in Improving operational efficiency and cost competiveness of steel plants - A case study for electric furnace melt shop and hot rolling mill
- Co-author in Mathematical model and stabilization system for slag mode of blast furnace operation
Lorenzo Orlietti (i.Process S.r.l.)
- Co-author in i.Process/Steel-RHF: An adaptive algorithm aimed at online optimization of re-heating furnaces
Lorenzo Orlietti (i.Process S.r.l)
- Co-author in A training framework for i.Process/Steel-RHF APC system
SHUNSUKE OURA
- Author in Technology for improvement sinter productivity and sinter strength in the sintering process by gas fuel and oxygen injection technology ―Development of gas fuel and oxygen injection technology in iron ore sintering
Takao Owada
- Co-author in Development of looper shape meter in hot rolling
Hamdi Alper ÖZYİĞİT
- Co-author in A new practical engineering approach to improving the service sustainablility of copper staves in blast furnaces
Dieter Paesold
- Co-author in Wear generation during cold strip rolling - a model based analysis
Philipp Paier
- Author in Real-time 3D reconstruction and defect detection on hot-rolled steel products based on the laser-light-section method
Pabitra Palai
- Co-author in Identification of peritectic grades of steel using high temperature phase transformation studies
Heinz Palkowski
- Co-author in Challenges in the steel industry and consequences for rolling plant technologies
Harald Panhofer
- Co-author in First operating experiences with post-combustion lances at BOF shop LD3
- Co-author in Impact of carbon, silicon and manganese contents on the dissolution and melting behaviour of scrap in a dynamic BOF model
Arthur Papiez (Primetals Technologies Poland)
- Co-author in Rolling into the future by digitalization
Stephanie PARIS
- Co-author in Detection of coal weathering
Roberto Parreiras
- Co-author in Aplication of the similarity method for cold modeling a 330 tons BOF converter in laboratory
- Co-author in BOF cold model - Metal slag bath mass movement determination by supersonic blow from multi nozzles
- Co-author in BOF lance TIP mult nozzles coalescence trigonometric study
Roberto Parreiras Tavares
- Co-author in BOF pressure effects over jet penetration at TKCSA
- Co-author in TBM tuyeres arrangements and flow – comparison between BOF thyssenkrupp CSA and cold model
Herbert Pasteiner
- Author in Innovative solutions for BOF dedusting systems – Achieving minimum emission levels
Krzysztof Pastucha
- Co-author in Boosting the value of your steelmaking slag and dust
- Co-author in Impact of carbon, silicon and manganese contents on the dissolution and melting behaviour of scrap in a dynamic BOF model
- Co-author in Upgrade of stainless and special steel production by implementation of AOD process at ACRONI
Alexander Paul
- Co-author in Impact of carbon, silicon and manganese contents on the dissolution and melting behaviour of scrap in a dynamic BOF model
Geert Paulussen
- Author in Multi-target optimization of batch annealing bays
Christian Payerl (ABB)
- Co-author in Improved power quality and production benefits in EAF steel making by the use of modern MMC STATCOM
Hans Peintinger
- Author in Industry 4.0 in rolling mills enabled by proactive quality assurance
Christophe Pelletier
- Co-author in Hot strip mill roll gap lubrication with low cost green oils and waste oils
Florian Markus Penz
- Author in Impact of carbon, silicon and manganese contents on the dissolution and melting behaviour of scrap in a dynamic BOF model
Crescenzo Pepe (i.Process S.r.l.)
- Author in A training framework for i.Process/Steel-RHF APC system
- Author in i.Process/Steel-RHF: An adaptive algorithm aimed at online optimization of re-heating furnaces
Eduardo Perea (Sandvik)
- Co-author in Muffle tubes: choose the right material for longer service life
Gustavo Pereira
- Co-author in BOF cold model - Metal slag bath mass movement determination by supersonic blow from multi nozzles
Heikki Pesonen
- Author in In situ measurement of silicon content in molten ferrochrome
Michael Peters
- Co-author in Ironmaking in Western Europe
Roman Petukhov
- Co-author in Blast furnace smelting of the titaniferous magnetite ores with the various content of titanium dioxide and quality of the agglomerated raw materials
Lukas Horst Petzold
- Co-author in Comprehensive competence in beneficiation technologies – from the raw materials to steel
Andrea Pezza
- Author in Development of high quality grades production techniques using a VOD plant at voestalpine Giesserei Linz
Jacques Pezzana
- Co-author in A fast model to evaluate threading refusal risk in hot rolling process
Thomas Pfatschbacher
- Co-author in Know-how based root-cause analysis tool to ensure high product quality and process stability
- Co-author in Tangshan new #2 cold rolling mill complex to produce advanced high strength steels for automotive market
Herbert Pfeifer
- Co-author in Macroscopic texture examination of huge polished micrograph sections for validation of remelting simulations
- Co-author in Process model development for reheating plants using simple numerical methods enhanced with CFD results
Greta Piccolo
- Author in Hot forming of a low-carbon steel AISI 1005 for fashion accessories
Lukas Pichler
- Co-author in Know-how based root-cause analysis tool to ensure high product quality and process stability
Christoph Pichler
- Co-author in Zinc oxide from steel mill dust - A wide range of opportunities
Luca Piedimonte
- Author in An agent based approach for steel industries for exploitation of opportunities and challenges provided by energy markets
Ralf Pierre
- Co-author in Adaptive EAF online control based on innovative sensors and comprehensive models
Jean-Christophe Pierret
- Author in Adaptation of CRM EAF model for 100% DRI charging and implementation at Lazaro-Cardenas plant
Ludivine PIEZANOWSKI
- Co-author in Recycling of blast furnace sludge by hydrometallurgy process
Alessandro Pigani
- Author in Danieli Universal Endless (DUE®) The new evolution of Danieli thin slab casting and rolling plant
Karl Pilz
- Co-author in Briquetting of ferrous and coal fines – Saving resources, creating value
Vincent Piret
- Author in Enhancement of the EAF dust recycling in self-reducing briquettes by controlling their hydration behaviour
Stefan Pirker
- Co-author in A combined data processing approach to improve blast furnace raceway blockage detection
Tobias Plattner
- Author in Carbon recycling at its best – Utilization of by-products from process-gas fermentation
Tom Plikas
- Author in Explosions due to the entrapment of water by molten iron, steel, or slag
Benjamin Pohu
- Co-author in Process parameters for the production of steel roll-bonded multilayer plates and strips
Jan Polzer
- Author in An active actuator to eliminate chatter marks caused by self-exited vibrations in rolling mills without speed losses
- Co-author in Economic impact maximization and throughput increase by decentral self-optimization of a pickling line
Corentin PONDAVEN
- Co-author in Numerical modelling and simulation of the rolling of large diameter bars
Paolo Porracin
- Co-author in Technical update on the SMS group automatic slag door condoor: lessons learned and results achieved in 7 years of experience
Mark Potter
- Co-author in Real time sensing, dynamic modelling and advanced control of melt temperature in liquid steelmaking
Johann Prammer
- Author in Challenges to the steel industry in the transformation process towards low-carbon economy at the example of voestalpine
Krishnan Premanand
- Co-author in Optimizing OPEX for steel plants – Improve process control and energy efficiency
Andreas Priesner
- Co-author in Robotic guided tap hole maintenance on EAF, a major increase of worker safety
Harsh Priyadarshi
- Author in 3D numerical model for gas and pulverized coal injection optimization
Christoph Proell
- Co-author in Advanced roll-gap lubrication solutions in hot and cold rolling
Hans Pronk
- Author in Automation of hot metal pouring in our steel plant
Michel PUILLET
- Co-author in Recycling of blast furnace sludge by hydrometallurgy process
Stefan Purrer
- Co-author in Newly developed combined abrasive cut-off and cold circular sawing machines for flexible applications in the steel and special metals industry
Stefan Puttinger
- Author in A combined data processing approach to improve blast furnace raceway blockage detection
LIANG QIKAI
- Co-author in Broadening the steel markets by direct application of high quality ESP strips
SUN QINGQIANG
- Co-author in Broadening the steel markets by direct application of high quality ESP strips
Thibault QUATRAVAUX
- Author in Mathematical model dedicated to the diagnosis and optimization of blast furnace hot stove battery operation
Marcos Queiroz
- Author in Product driven project methodology put into practice – how to implement a production management system for a plate mill line within 6 months
Thiago RABELO NUNES CAMPOS
- Author in Improvement of overall blast furnace performance after the revamping of the top charging system at ArcelorMittal Atlantique et Lorraine BF-2
Harald Rackel
- Author in Severstal's revamp of their four stand flat cold tandem line in Cherepovets
Fritz Raimund
- Author in The journey of one square millimeter wire surface
Barbara Rammer
- Co-author in Briquetting of ferrous and coal fines – Saving resources, creating value
Ravi Ranjan
- Co-author in Identification of peritectic grades of steel using high temperature phase transformation studies
Shamik Kumar Ray
- Co-author in 3D numerical model for gas and pulverized coal injection optimization
Samuel RAYNAL
- Co-author in Recycling of blast furnace sludge by hydrometallurgy process
Shank R. Balajee
- Co-author in BOF pressure effects over jet penetration at TKCSA
Reinhard Redl
- Author in Comprehensive competence in beneficiation technologies – from the raw materials to steel
- Co-author in Design and optimization of iron ore pelletizing plants based on coupled numerical simulations
Heiko Reichel
- Co-author in Performance Modules – a convenient and sophisticated way for hot rolling mills
Jens Reichel
- Co-author in Energy balance of the integrated route
Johann Reidetschlaeger
- Co-author in Numerical simulation of sinter process and optimization of top burner system by CFD simulation
Norbert Rein
- Author in Enhancing performance of integrated steel plant by combining FINEX® and blast furnace
Peter Reisinger (voestalpine Stahl GmbH)
- Author in Secondary Metallurgy No. 4 - The answer to the future quality demands at voestalpine Stahl GmbH
Tim Rekersdrees
- Co-author in Valorisation of slag and by products from EAF-metallurgy – NoWASTE a feasible way to go?
Tim Rekersdrees (Georgsmarienhütte GmbH)
- Author in Adaptive EAF online control based on innovative sensors and comprehensive models
xavier renard
- Co-author in Data mining continuous sensor data for training plant wide defect models
Franz Reufer
- Author in Reactive PCI® technology - the next milestone in Küttner's comprehensive PCI know-how
Luc RICHARTZ
- Co-author in Improvement of overall blast furnace performance after the revamping of the top charging system at ArcelorMittal Atlantique et Lorraine BF-2
Paul Riches
- Author in Rolling into the future by digitalization
Gerhard Richter
- Author in Newly developed combined abrasive cut-off and cold circular sawing machines for flexible applications in the steel and special metals industry
Pierre Riedinger
- Co-author in Robust control of the lubrication in a hot rolling process
Gergö Rimaszéki
- Author in Optimal mixing and granulation process for fine utilization in sinterplants
Markus Ringhofer (Primetals Technologies Austria GmbH)
- Co-author in The digitalization of steel production
Jayson S. Ripke (Midrex Technologies Inc.)
- Co-author in Future of direct reduction in Europe – Medium and long-term perspectives
Roman Robic (SU Acroni)
- Co-author in Upgrade of stainless and special steel production by implementation of AOD process at ACRONI
Ian Robinson
- Author in Recent applications of the MULPIC® plate cooling technology
Matteo Rocchi (i.Process S.r.l.)
- Co-author in A training framework for i.Process/Steel-RHF APC system
- Co-author in i.Process/Steel-RHF: An adaptive algorithm aimed at online optimization of re-heating furnaces
Romario Rocha
- Co-author in Analysis of geometrical aspects of BOF coverters and correlations with process parameters
David Rodriguez
- Author in Modelling and simulation of ignition hoods for iron ore sintering
Andreas Rohrhofer
- Co-author in Fully automatic converter steelmaking
- Co-author in Off the beaten path: New condition monitoring applications in steel making
Lea Romaniello
- Co-author in Modelling of basic oxygen furnace slag treatment and processing in order to evaluate possibility of their reuse
- Co-author in Water process integration: Assessment of an ultrafiltration and reverse osmosis based treatment to regenerate coke-making area wastewater
Victor Romo (voestalpine Texas LLC)
- Co-author in Commissioning and first operation results of world largest voestalpine Texas Midrex HBI Plant
Felice Rosito
- Co-author in Water process integration: Assessment of an ultrafiltration and reverse osmosis based treatment to regenerate coke-making area wastewater
Roman Rössler
- Author in Analysis of multi component oxides by calibration-free laser-induced breakdown spectroscopy
Roman Rössler (voestalpine Stahl GmbH)
- Co-author in Secondary Metallurgy No. 4 - The answer to the future quality demands at voestalpine Stahl GmbH
Tobias Rothenfluh
- Author in Rotary kilns for direct reduction of iron ore: design, operational guidelines and troubleshooting based on complex mathematic modeling
Chandan Roy
- Co-author in Nitrogen behavior during steelmaking of high Al TRIP steels
Tatiana ROZHKOVA
- Author in Detection of coal weathering
Antje Rückert
- Author in Process model development for reheating plants using simple numerical methods enhanced with CFD results
- Co-author in Macroscopic texture examination of huge polished micrograph sections for validation of remelting simulations
Warmbold Rudiger
- Co-author in Adaptation of CRM EAF model for 100% DRI charging and implementation at Lazaro-Cardenas plant
Stefan Ruhs
- Co-author in Bypassing problems related to water cooling – Case study for applying ILTEC in an 100t EAF
ESTEBAN RUISANCHEZ
- Author in Dunite patch for slagdoor and hearth lining EAF
- Author in Torpedo ladle: Monolithic lining improvements
- Author in Value in use of pasek dunite in the BOF process
Bernhard Rummer
- Co-author in Installation of a dry slag granulation pilot plant at blast furnace A of voestalpine
Wilfried Runde
- Author in Manufacturing execution systems MES 4.0 from SMS group
Jeremy Rydberg
- Author in Improving reliability for steel mill furnace rolls
Michael Rzepczyk
- Co-author in State of the art gas cleaning and utilization for BOF gases: operational results and benefits
Ali SAAD
- Co-author in Improving the ingot quality by understanding the behavior of the mold flux during casting process using a 3D fluid/structure numerical simulation model
Paolo Saccuman
- Co-author in Operation of a DC EAF based meltshop connected to a weak electrical network: A feasibility study
Afshin Sadri
- Co-author in AU-E control of blast furnace refractory lining at NTMK-EVRAZ ensures intensive operation and prediction of the end of campaign of titania blast furnace.
- Co-author in Implementation and results of non-destructive testing method for cooling staves thicknesses at NLMK
Afshin Sadri (Hatch Global Director of Non-Destructive Testing (NDT) Group)
- Author in Identifying the blast furnace salamander position by using non-destructive testing (NDT) techniques
P P Sahoo
- Author in Identification of peritectic grades of steel using high temperature phase transformation studies
Mohamed Saied Essa Othman Hussein
- Author in Adjusting Hot Strip Mill Level2 Setup Using Tribological Approach to Eliminate Biting Refusal
Akira Sako
- Co-author in Mill stabilizing device for reduction of mill vibration in hot rolling
Motoaki Sakumoto (JFE Steel Corporation Ltd.)
- Co-author in Development of new mash seam welder (Cross Seam Welder, CSW) for carbon steel pickling line
Raissa Salgado
- Co-author in Aplication of the similarity method for cold modeling a 330 tons BOF converter in laboratory
Sandip Samanta
- Co-author in Recent applications of the MULPIC® plate cooling technology
Mohammed SAMMAN
- Author in Yield improvement at direct reduction plant, module-E by modifying oxide screen-mesh
Erik Sandberg
- Author in Soft sensors for improved control of electric arc furnaces
S. Santarossa (Turboden)
- Co-author in Sinter plant and basic oxygen furnace waste heat utilization – New configuration with ORC modules for power generation
Marta Santorroman
- Author in Gas odorization technology for toxic gas leaks detection in the steel industry
Raissa Santos Salgado
- Author in TBM tuyeres arrangements and flow – comparison between BOF thyssenkrupp CSA and cold model
- Co-author in BOF cold model - Metal slag bath mass movement determination by supersonic blow from multi nozzles
Caesar Sasse
- Author in Galvanizing of 3rd generation AHSS-grades with PrOBOX®-technology and flexible thermal treatment
- Co-author in Influences of the changed chemical composition of modern AHSS-grades on the pickling process
Cesar Sato
- Co-author in Continuous improvements in BOF at Arcelor Mittal João Monlevade by technology slagless lance
Abdullah Savascioglu
- Co-author in Energy saving and process optimization in a conventional hot strip mill by application of the latest high-efficient descaling technology
Henrik Saxen
- Co-author in Steel plant integrated charcoal production from wood and kraft lignin – Feasible market conditions
Sonja Schadler
- Co-author in Investigation of the specific surface area and pore structure of blast furnace sinters
Hardy Schäfer
- Author in Information on carcinogenic substances in steel casting ladles
Christina Schaffer (voestalpine Stahl Donawitz GmbH)
- Co-author in Investigation of the specific surface area and pore structure of blast furnace sinters
Martin Schaler
- Co-author in Holistic optimization models – recent developments in ironmaking process control
Carsten Schäpker (Minkon GmbH)
- Author in Online Measurement of dissolved gasses in secondary metallurgy
Eric Schaub
- Author in Hot blast stoves – Latest developments, assessment and lifetime extension
Peter Schellingerhout
- Co-author in Wear generation during cold strip rolling - a model based analysis
Johannes Schenk
- Co-author in Impact of carbon, silicon and manganese contents on the dissolution and melting behaviour of scrap in a dynamic BOF model
- Co-author in Investigation of the specific surface area and pore structure of blast furnace sinters
- Co-author in TBM tuyeres arrangements and flow – comparison between BOF thyssenkrupp CSA and cold model
Christoph Schirm
- Co-author in Performance supervision of automatic surface inspection systems
Martin Schlautmann
- Author in Dynamic on-line monitoring and end point control of dephosphorisation in the BOF converter
Henning Schliephake
- Author in Valorisation of slag and by products from EAF-metallurgy – NoWASTE a feasible way to go?
Ludger Schlinge
- Co-author in Adaptive EAF online control based on innovative sensors and comprehensive models
Reinhard Schmidhuber
- Author in X-Shape – high precision and cost-efficient flatness measurement and control
Matthias Schmidtchen
- Author in Opportunities of experimental and numerical simulation of steel rolling technologies at the Institute of Metal Forming of TU Bergakademie Freiberg
Peter Schmöle
- Co-author in Ironmaking in Western Europe
Franz Xaver Schmoller
- Author in The most unique hot strip mill in the world
Gunther Schober
- Author in Custom fitted order dressing for metals industries
- Co-author in Valuable principles for effective planning & scheduling: A holistic approach
Robin Schott
- Author in Reactive PCI® technology - the next milestone in Küttner's comprehensive PCI know-how
Frank Schrama
- Co-author in Dynamic on-line monitoring and end point control of dephosphorisation in the BOF converter
Christian Schubert
- Author in Process model development for reheating plants using simple numerical methods enhanced with CFD results
Susanne Schüler
- Author in Factors of influence during and after the electric steel making process: Characterization and optimization of electric arc furnace slag
Elmar Schuster
- Co-author in Investigation of the specific surface area and pore structure of blast furnace sinters
Rudolf Schwaha
- Co-author in Optimization of converter design with CFD – Practical application for converter revamp
Matthias Schwarz
- Co-author in Influence of pre-treated biomass on the microstructure of metallurgical coke
Joerg Schwelberger
- Co-author in Briquetting of ferrous and coal fines – Saving resources, creating value
Christoph Sedivy
- Author in Practical user experience with an Industrie 4.0 electrode control system
Peter Seemann
- Author in Developing heat treat equipment for 3rd generation AHSS
Alois Seilinger
- Co-author in The most unique hot strip mill in the world
Nicolas SEJOURNE
- Co-author in Mathematical model dedicated to the diagnosis and optimization of blast furnace hot stove battery operation
Dieter Senk
- Co-author in Granulation of ultra-fine ores for utilization in iron ore sintering
- Co-author in Influence of pre-treated biomass on the microstructure of metallurgical coke
Dieter Senk
- Co-author in Influence of injection of pre-reduced iron ores on the processes in the blast furnace raceway
Tommaso Settimo
- Author in Danieli cold mill complexes for automotive applications
Simon Seuren
- Co-author in Flatness characterisation of hot plates for plate levelling
Ahmed Shalaby
- Co-author in How technological advancements in proactive and predictive maintenance can increase the lifecycle of plant equipment
Huinan Shao
- Co-author in Modeling of steel bar melting process in an experimental induction furnace
John Shibu Kondoor
- Co-author in Enhancing performance of integrated steel plant by combining FINEX® and blast furnace
Hironori Shimogama
- Co-author in Latest PL-TCM technologies for advanced high strength steel applications
Geon Shin
- Co-author in CEM® Process : the most efficient process for thin gauge products
Soenke Siebels
- Co-author in Steel vacuum degassing mechanical pumping system without process gas filter: latest technical developments for reduction in CAPEX and OPEX
Wenderson Silva
- Co-author in Slagless technology - New BOF performances at GERDAU OURO BRANCO
Fabrício Silveira Garajau
- Co-author in BOF pressure effects over jet penetration at TKCSA
Giuseppe Simioli
- Author in Operation of a DC EAF based meltshop connected to a weak electrical network: A feasibility study
Ranjay Kumar Singh
- Co-author in Identification of peritectic grades of steel using high temperature phase transformation studies
Rajiv Singh
- Co-author in GRANSHOT turns logistic challenge into valuable product in integrated steel making
Subhash KR Sinha
- Co-author in TSL KPO BF 1 – Design, commissioning and start-up
Mario Sinnaeve
- Co-author in Characterizations, modelling and lab trials assisting the development of a graphitic HSS work roll for rear finishing stands
Michael Skorianz
- Co-author in Real time sensing, dynamic modelling and advanced control of melt temperature in liquid steelmaking
Bas Smeulders
- Co-author in Wear generation during cold strip rolling - a model based analysis
Martin Smith
- Co-author in Towards a cleaner future - Trends in gas cleaning technology for ironmaking
Hanka Snatkin
- Co-author in Adaptive EAF online control based on innovative sensors and comprehensive models
Peter Sommer
- Co-author in Real-time 3D reconstruction and defect detection on hot-rolled steel products based on the laser-light-section method
Yong Mun SON
- Co-author in Analysis of copper stave breakage and restoration technology in Pohang no.4 Blast Furnace
Wengang Song
- Co-author in Operation and maintenance technology for prolong campaign life of large blast furnace hearth
Detlef Sonnenschein
- Co-author in Economic impact maximization and throughput increase by decentral self-optimization of a pickling line
Romain Soulignac
- Author in Industrial application of blast furnace liquid levels measurements using strain gauges
Alessandra Spaghetti
- Author in Improved production efficiency with material selection for steel making
- Author in Muffle tubes: choose the right material for longer service life
Andreas Spanlang
- Co-author in Integrated steel plant optimization in flow sheeting process integration platform
Wolfgang Spies
- Co-author in Severstal's revamp of their four stand flat cold tandem line in Cherepovets
Nikolai Spirin
- Co-author in Influence of sinter and pellets proportion and quality on blast furnaces operation
Marten Sprecher
- Author in Energy balance of the integrated route
Richard Stadlmayr
- Co-author in Fully automatic converter steelmaking
Guenther Staudinger
- Co-author in Dynamic modeling of the converter off gas composition in the cooling stack
Tobias Stefan
- Co-author in Rotary kilns for direct reduction of iron ore: design, operational guidelines and troubleshooting based on complex mathematic modeling
Gabriel Steindorf
- Author in Granulation of ultra-fine ores for utilization in iron ore sintering
Robert Steiner (voestalpine Texas LLC)
- Co-author in Commissioning and first operation results of world largest voestalpine Texas Midrex HBI Plant
Thomas Steinparzer
- Author in Sinter plant and basic oxygen furnace waste heat utilization – New configuration with ORC modules for power generation
- Co-author in Innovative solutions for BOF dedusting systems – Achieving minimum emission levels
- Co-author in Waste heat recovery for EAF – Innovative concepts & industrial implementation
Jahn Steinseifer (SMS group GmbH)
- Co-author in Performance Modules – a convenient and sophisticated way for cold rolling mills
Andreas Steinwandter
- Author in Towards a cleaner future - Trends in gas cleaning technology for ironmaking
Wolfgang Sterrer
- Author in Commissioning and first operation results of world largest voestalpine Texas Midrex HBI Plant
Hugo Stocker
- Co-author in A combined data processing approach to improve blast furnace raceway blockage detection
Anett Stöcker
- Co-author in Opportunities of experimental and numerical simulation of steel rolling technologies at the Institute of Metal Forming of TU Bergakademie Freiberg
Klaus Stohl
- Co-author in Off the beaten path: New condition monitoring applications in steel making
Ida Strandkvist
- Author in Influence of basicity on chromium leaching of low alloy EAF slag
Daniel Strasser
- Author in Wear generation during cold strip rolling - a model based analysis
Michael J. Strelbisky
- Co-author in First operating experiences with post-combustion lances at BOF shop LD3
Jean-Francois Stumper
- Author in Industrial application of blast furnace liquid levels measurements using strain gauges
Shigeki Sueda
- Co-author in Development of looper shape meter in hot rolling
Sohei Sukenaga
- Co-author in New discrete element simulation for trickle flow in blast furnace
Mitren Sukhram
- Author in Hot blast superheating – A scalable technology to reduce coke consumption
Hartmut Sulenski (SMS group GmbH)
- Co-author in Influences of the changed chemical composition of modern AHSS-grades on the pickling process
Pei-Ling Sun
- Author in Investigation of through-thickness texture of a 1.24% Si electrical steel
Lena Sundqvist
- Co-author in Unconventional reducing agents for sustainable blast furnace ironmaking
Hannu Suopajärvi
- Co-author in Evaluation of bio-coke strength and reactivity for blast furnace use
Garcia Sibaja Suriel (voestalpine Texas LLC)
- Co-author in Commissioning and first operation results of world largest voestalpine Texas Midrex HBI Plant
Ryosuke Suzuki
- Co-author in New discrete element simulation for trickle flow in blast furnace
Martin Tagesson (Höganäs Sweden AB)
- Co-author in Waste heat recovery for EAF – Innovative concepts & industrial implementation
T. Tamagawa (Sendzimir Japan Ltd.)
- Co-author in Development of advanced 20Hi split housing ZR-mill (HZ-mill) for stainless and electrical steel
Masao Tambara
- Co-author in i Box pickling tanks for production improvement of advanced high strength steel upgraded from deep bath tank
- Co-author in Introduction of cold rolling complex for tin plate
Wenzhen Tan
- Co-author in Tangshan new #2 cold rolling mill complex to produce advanced high strength steels for automotive market
Guangwu Tang
- Co-author in Modeling of steel bar melting process in an experimental induction furnace
Kamesh Sandeep Telkicherla
- Author in Investigating the oxidation kinetics of magnetite pellet
Tomomichi Terabatake
- Co-author in Improvement of productivity for ultra-low carbon grade of Cr base ferrite stainless steel
Ewout Tesselaar
- Author in New top charging unit for Zaporizhstal
Jürgen Tewes
- Co-author in Macroscopic texture examination of huge polished micrograph sections for validation of remelting simulations
Jean-Claude Thibaut
- Co-author in Adaptation of CRM EAF model for 100% DRI charging and implementation at Lazaro-Cardenas plant
Volker Thomasberger
- Co-author in State of the art gas cleaning and utilization for BOF gases: operational results and benefits
Jörg Thomasberger
- Author in Optimizing OPEX for steel plants – Improve process control and energy efficiency
Dmitriy Tihonov
- Co-author in Implementation and results of non-destructive testing method for cooling staves thicknesses at NLMK
Giulio Timelli
- Co-author in Hot forming of a low-carbon steel AISI 1005 for fashion accessories
Wataru Todo
- Author in Improvement of productivity for ultra-low carbon grade of Cr base ferrite stainless steel
Andrea Tolettini (Feralpi Siderurgica S.p.A.)
- Co-author in Activities for EAF Process Improvement to Acciaierie di Calvisano including KPI's approach for process monitoring and implementation of lime injection
Nicola Tomba
- Author in LLR Rolls - New design concept for composite rolls and innovative ring locking system
- Author in New sizing stands for bar and wire rod mills, to achieve tighter tollerances - the BSS stands
Matteo Tomba
- Co-author in New sizing stands for bar and wire rod mills, to achieve tighter tollerances - the BSS stands
Matteo Tomba
- Co-author in LLR Rolls - New design concept for composite rolls and innovative ring locking system
Takayoshi Tomino
- Author in Introduction of cold rolling complex for tin plate
Jose Geraldo Torres
- Co-author in Continuous improvements in BOF at Arcelor Mittal João Monlevade by technology slagless lance
Francesco Toschi
- Author in Forging-like rolling with high reduction of SBQ long products
- Author in The production of railway rails in modern and efficient plants - The new ARBZ rail mill
Breno Totti
- Author in BOF pressure effects over jet penetration at TKCSA
- Author in Slagless technology - New BOF performances at GERDAU OURO BRANCO
- Author in TBM tuyeres arrangements and flow – comparison between BOF thyssenkrupp CSA and cold model
- Co-author in BOF blowing process challenges for high rate of iron ore pellet addition - Process development and results at TKCSA
Volker Trappmann
- Co-author in State of the art gas cleaning and utilization for BOF gases: operational results and benefits
Fabio Trigatti
- Co-author in EAF double probe extraction system for off-gas analysis: the SMS group’s cornerstone for EAF process optimization solutions – The synergy program
- Co-author in Steel vacuum degassing mechanical pumping system without process gas filter: latest technical developments for reduction in CAPEX and OPEX
Claudio Trungadi
- Co-author in Dynamic modeling of the converter off gas composition in the cooling stack
Paul Trunner
- Author in Waste heat recovery for EAF – Innovative concepts & industrial implementation
- Co-author in Sinter plant and basic oxygen furnace waste heat utilization – New configuration with ORC modules for power generation
Kosei Tsuji
- Co-author in i Box pickling tanks for production improvement of advanced high strength steel upgraded from deep bath tank
- Co-author in Introduction of cold rolling complex for tin plate
Alexander Tubikanec
- Co-author in Development of high quality grades production techniques using a VOD plant at voestalpine Giesserei Linz
Michele Turchetto
- Co-author in Danieli cold mill complexes for automotive applications
Norbert Uebber
- Author in Advanced data-driven prediction models for BOF end-point detection
Kazuya Uebo
- Co-author in Influence of kind and particle size of semi-soft coking coals on dilatation of blended coal
Shigeru Ueda
- Co-author in Influence of interfacial tension and viscosity on the formation of metal emulsion by rising gas bubble.
Soichiro Uehara (JFE Steel Corporation Ltd.)
- Co-author in Development of new mash seam welder (Cross Seam Welder, CSW) for carbon steel pickling line
Hugo Uijtdebroeks
- Co-author in Early roll defects detection in roughing mill
Hugo Uijtdebroeks
- Co-author in Introduction of tablets for work roll evaluation
Daniel Ulrich
- Co-author in Numerical simulation of sinter process and optimization of top burner system by CFD simulation
Hemant Upadhyay
- Author in Mathematical model to simulate liquid metal & slag accumulation, drainage and heat transfer in blast furnace hearth
Thomas Vallee
- Author in Industrial results obtained with the new generation of laser welder
Kimmo Vallo
- Co-author in Analysis of time delay in heat transfer caused by slag accumulated on EAF side panels
Luc van de Putte
- Co-author in Indoor positioning of steel ladles using beacons
Wim VAN DER STRICHT
- Co-author in Carbon recycling at its best – Utilization of by-products from process-gas fermentation
Rob van der Veek (Danieli Corus BV)
- Co-author in Hot blast stove campaign extension repairs at operating temperature
Luc Vanel
- Co-author in Robust control of the lubrication in a hot rolling process
Louis Vanhulle
- Co-author in Introduction of tablets for work roll evaluation
Reinoud Van Laar
- Author in New hearth design for blast furnace no. 3 at DK
Joris van Pouke
- Co-author in Advanced data-driven prediction models for BOF end-point detection
KRISTIAAN VAN TEUTEM
- Co-author in Digital reheating technolgy - New developments and benefits
Han Van 't Hoff
- Co-author in Multi-target optimization of batch annealing bays
Andy van Yperen
- Co-author in Advanced data-driven prediction models for BOF end-point detection
Alessio Ventura (Feralpi Siderurgica S.p.A.)
- Co-author in Activities for EAF Process Improvement to Acciaierie di Calvisano including KPI's approach for process monitoring and implementation of lime injection
Bart Vervaet
- Author in Hot strip mill roll gap lubrication with low cost green oils and waste oils
Michele Vezzola (Polytec S.r.l.)
- Author in Machine intelligence for meltshop 4.0
Marcos Viana
- Co-author in BOF blowing process challenges for high rate of iron ore pellet addition - Process development and results at TKCSA
Ville-Valtteri Visuri
- Co-author in In situ measurement of silicon content in molten ferrochrome
Galina Vitkina
- Co-author in Blast furnace smelting of the titaniferous magnetite ores with the various content of titanium dioxide and quality of the agglomerated raw materials
Norbert Vogl
- Co-author in CFD modeling of standard and shaft-type Electric Arc Furnaces
Lukas Voj
- Co-author in Proportional Oxygen Burner - A light, multipurpose burner for metallurgical applications
Lukas Voj
- Author in Indoor positioning of steel ladles using beacons
Marco Volpe
- Co-author in Technical update on the SMS group automatic slag door condoor: lessons learned and results achieved in 7 years of experience
Petrico von Schweinichen
- Co-author in Advanced HSS grades – Key material for rolling of steel with high efficiency
Bernhard Voraberger
- Author in Upgrade of stainless and special steel production by implementation of AOD process at ACRONI
Kozo Wada (Primetals Technologies Japan Ltd.)
- Co-author in Introduction of cold rolling complex for tin plate
Stefan Wallner
- Co-author in Bypassing problems related to water cooling – Case study for applying ILTEC in an 100t EAF
Gisele Walmag
- Co-author in Characterizations, modelling and lab trials assisting the development of a graphitic HSS work roll for rear finishing stands
Jichao Wang
- Co-author in Using numerical simulation and virtual reality visualization for steelmaking applications
Yujiro Watanabe
- Co-author in Development of new mash seam welder (Cross Seam Welder, CSW) for carbon steel pickling line
JI WEIBIN
- Co-author in Broadening the steel markets by direct application of high quality ESP strips
Bernhard Weiss
- Author in Integrated steel plant optimization in flow sheeting process integration platform
Alexander Weller (SMS group GmbH)
- Co-author in Severstal's revamp of their four stand flat cold tandem line in Cherepovets
Hubertus Wenig
- Author in Energy saving and process optimization in a conventional hot strip mill by application of the latest high-efficient descaling technology
Christian Westermayer
- Author in Tangshan new #2 cold rolling mill complex to produce advanced high strength steels for automotive market
Carl-Mikael Wiklund
- Co-author in Steel plant integrated charcoal production from wood and kraft lignin – Feasible market conditions
Sabine Will
- Co-author in Real time sensing, dynamic modelling and advanced control of melt temperature in liquid steelmaking
Niklas Willemsen
- Author in Improved power quality and production benefits in EAF steel making by the use of modern MMC STATCOM
Ronald Wilmes
- Co-author in Optimizing OPEX for steel plants – Improve process control and energy efficiency
Gerald Wimmer
- Author in Boosting the value of your steelmaking slag and dust
- Author in Fully automatic converter steelmaking
- Co-author in Optimization of converter design with CFD – Practical application for converter revamp
- Co-author in Successful revamping of sublancemanipulators for the LD-converters at voestalpine Stahl Gmbh – safe of process time and availability
- Co-author in Upgrade of stainless and special steel production by implementation of AOD process at ACRONI
Erich Stefan Wimmer (Primetals Technologies Austria GmbH)
- Author in Optimization of converter design with CFD – Practical application for converter revamp
Erich Stefan Wimmer (Primetals Technologies Austria GmbH)
- Co-author in Innovative solutions for BOF dedusting systems – Achieving minimum emission levels
Roman Winkler
- Co-author in ARVEDI ESP: The technological contribution for performance optimization
Guenther Winter
- Co-author in The digitalization of steel production
Sebastian Winters
- Co-author in Stainless steel endless continuous cold rolling with X-HI® stands technology
Bartek Wisniewski (Minkon GmbH)
- Co-author in Online Measurement of dissolved gasses in secondary metallurgy
Pavel Wojnar
- Co-author in BOF blowing process challenges for high rate of iron ore pellet addition - Process development and results at TKCSA
Carl WOLF
- Co-author in Carbon recycling at its best – Utilization of by-products from process-gas fermentation
Andreas Wolff
- Co-author in Real time sensing, dynamic modelling and advanced control of melt temperature in liquid steelmaking
Jennifer Woloshyn
- Co-author in Explosions due to the entrapment of water by molten iron, steel, or slag
Shengli Wu
- Co-author in Research on injection of COG in middle-upper part of COREX melter gasifier
Thilo Wuebbels
- Co-author in State of the art gas cleaning and utilization for BOF gases: operational results and benefits
Walter Wukovits
- Co-author in Integrated steel plant optimization in flow sheeting process integration platform
Christian Wulfert
- Co-author in Inline measurement of electromagnetic parameters for characterization of material properties of steel strip with a focus on magnetic values
Yingtie Xu
- Co-author in Study of large size Ds type inclusions in bearing steel
Wanren Xu
- Author in Operation and maintenance technology for prolong campaign life of large blast furnace hearth
Akihiro Yamamoto
- Co-author in Introduction of cold rolling complex for tin plate
Tetsuya Yamamoto
- Co-author in New technique for coal size design based on unique thermoplasticity index
YU YAO
- Co-author in Broadening the steel markets by direct application of high quality ESP strips
Daniil D. Yashkov (Yandex Data Factory)
- Co-author in Optimization of ferroalloy use in the BOF process using machine learning methods
Shinichi Yasunari
- Co-author in Newly developed universal crown control mill “HYPER UCM” for rolling of high-hardness and thinner steel
Sang-ho Yi
- Co-author in Enhancing performance of integrated steel plant by combining FINEX® and blast furnace
Hongbin Yin
- Author in Nitrogen behavior during steelmaking of high Al TRIP steels
Wai Lai Ying (HATCH LTD.)
- Co-author in Identifying the blast furnace salamander position by using non-destructive testing (NDT) techniques
Winnie Ying
- Author in Implementation and results of non-destructive testing method for cooling staves thicknesses at NLMK
- Co-author in AU-E control of blast furnace refractory lining at NTMK-EVRAZ ensures intensive operation and prediction of the end of campaign of titania blast furnace.
Shih-Chuan Yu
- Author in Dynamic cooling control system of high strength steel wire rod
Sergei Zagainov
- Co-author in AU-E control of blast furnace refractory lining at NTMK-EVRAZ ensures intensive operation and prediction of the end of campaign of titania blast furnace.
Massimiliano Zampa (Danieli Centro Metallics)
- Co-author in New top charging unit for Zaporizhstal
Silvia Maria Zanoli
- Co-author in A training framework for i.Process/Steel-RHF APC system
- Co-author in i.Process/Steel-RHF: An adaptive algorithm aimed at online optimization of re-heating furnaces
Mirko Zanter
- Co-author in Stainless steel endless continuous cold rolling with X-HI® stands technology
Nikolay Zaytsev (OAO Severstal)
- Co-author in Severstal's revamp of their four stand flat cold tandem line in Cherepovets
Tobias Zehn
- Co-author in Valorisation of slag and by products from EAF-metallurgy – NoWASTE a feasible way to go?
Alexander Zeischka
- Co-author in Newly developed combined abrasive cut-off and cold circular sawing machines for flexible applications in the steel and special metals industry
Klaus Zeman
- Co-author in Wear generation during cold strip rolling - a model based analysis
Karl-Michael Zettl
- Co-author in BOF process improvements by modern gas purging strategy and technology
Zhekai Zhang
- Co-author in Research on injection of COG in middle-upper part of COREX melter gasifier
Jiacong Zhang
- Author in Research on injection of COG in middle-upper part of COREX melter gasifier
Chenn Zhou
- Author in Modeling of steel bar melting process in an experimental induction furnace
- Author in Using numerical simulation and virtual reality visualization for steelmaking applications
Jinming ZHU
- Co-author in Operation and maintenance technology for prolong campaign life of large blast furnace hearth
Alexander Zimmermann
- Co-author in Hot work tool steels strengthened by carbides and intermetallic phases
Patrik Zipp
- Author in Latest modernization developments for electric arc furnaces
Christian Zybill
- Author in Advanced HSS grades – Key material for rolling of steel with high efficiency