EUROPEAN STEEL TECHNOLOGY AND APPLICATION DAYS 2017 - ESTAD 2017

Name: EUROPEAN STEEL TECHNOLOGY AND APPLICATION DAYS 2017 - ESTAD 2017
Start: 2017-06-26T08:00:00+02:00
End: 2017-06-29T18:30:00+02:00
Location: No location set

26–29 Jun 2017

Europe/Vienna timezone

Online registration is closed!!

Speaker List

Reinhold Achatz (Head of Corporate Function Technology, Innovation & Sustainability, thyssenkrupp AG)
- Speaker at Initiative Carbon2Chem
Hesham Ahmed
- Speaker at Unconventional reducing agents for sustainable blast furnace ironmaking
YOUSIF ALDHAFEERY
- Speaker at Utilization of olefin plants waste coke as carbon additive in steel making
Alenisio A. Alves Nogueira (Lumar Metals Ltda)
- Speaker at Analysis of geometrical aspects of BOF coverters and correlations with process parameters
Alenisio Alexandre Alves Nogueira (Lumar Metals Ltda.)
- Speaker at BOF lance TIP mult nozzles coalescence trigonometric study
Franz Androsch
- Speaker at voestalpine Steel Research Award 2017
- Speaker at Innovation in the steel industry by voestalpine
Matti Aula
- Speaker at Analysis of time delay in heat transfer caused by slag accumulated on EAF side panels
Alexander Babich
- Speaker at Influence of pre-treated biomass on the microstructure of metallurgical coke
- Speaker at Influence of injection of pre-reduced iron ores on the processes in the blast furnace raceway
Jan Bak (Danieli Corus)
- Speaker at Hot blast stove campaign extension repairs at operating temperature
- Speaker at New top charging unit for Zaporizhstal
Frank Beddings
- Speaker at Latest PL-TCM technologies for advanced high strength steel applications
Neil Beever
- Speaker at Power system analysis of direct current electric arc funaces - SGL PRO ARC DC
Hannes Beile
- Speaker at Extended new overview of chemical injection systems at the EAF
- Speaker at Latest modernization developments for electric arc furnaces
Caterina Benigni
- Speaker at Zinc oxide from steel mill dust - A wide range of opportunities
Martin Bergmann
- Speaker at Advanced roll-gap lubrication solutions in hot and cold rolling
Michela Bernardi
- Speaker at The modernization of a coking plant making use of “STATE-OF-THE-ART” technologies: A european case
Rainer Bertling
- Speaker at Improvement of environmental protection and energy savings by suitable material handling systems
Loïc Bertrand
- Speaker at Robust control of the lubrication in a hot rolling process
Kristina Beskow
- Speaker at GRANSHOT turns logistic challenge into valuable product in integrated steel making
Dieter Bettinger
- Speaker at DR plant process optimization with DRIpaxTM expert system
- Speaker at Holistic optimization models – recent developments in ironmaking process control
Anrin Bhattacharyya
- Speaker at Investigation of the specific surface area and pore structure of blast furnace sinters
Wolfgang Bleck
- Speaker at Hot work tool steels strengthened by carbides and intermetallic phases
Michaela Boeberl
- Speaker at Efficient and environmental friendly sinter-cooling based on the counter flow principle
- Speaker at Numerical simulation of sinter process and optimization of top burner system by CFD simulation
Jens Brandenburger
- Speaker at Performance supervision of automatic surface inspection systems
Bruno Buchmayr
- Speaker at Challenges in the steel industry and consequences for rolling plant technologies
Ian Cameron
- Speaker at Behaviour of Cs and Sr radionuclides during the electric arc re-melting of contaminated scraps
- Speaker at Hot blast superheating – A scalable technology to reduce coke consumption
Trong Son Cao
- Speaker at Numerical investigations of oil film thickness formation inside the roll-bite during cold rolling
Matteo Caruso
- Speaker at Process parameters for the production of steel roll-bonded multilayer plates and strips
Daniel Carvalho
- Speaker at BOF blowing process challenges for high rate of iron ore pellet addition - Process development and results at TKCSA
- Speaker at BOF pressure effects over jet penetration at TKCSA
Daniel Carvalho
- Speaker at TBM tuyeres arrangements and flow – comparison between BOF thyssenkrupp CSA and cold model
Zhaoping Chen
- Speaker at Study of large size Ds type inclusions in bearing steel
Damien CHEVALIER
- Speaker at Numerical modelling and simulation of the rolling of large diameter bars
Myung Jong Cho
- Speaker at CEM® Process : the most efficient process for thin gauge products
Antonio Comelli (Danieli Automation SpA)
- Speaker at Danieli intelligent system: a leap forward towards the intelligent plant
Alberto Conejo
- Speaker at Physical modeling of bottom gas injection in metallurgical ladles: Status and current challenges
Marco Peter Cudicio
- Speaker at Advantages of Axial Cyclone Vs inertial spark arresters along the EAF secondary ducts: field experience and future developments through CFD analysis
Jérôme DAULMERIE
- Speaker at Improvement of overall blast furnace performance after the revamping of the top charging system at ArcelorMittal Atlantique et Lorraine BF-2
Carlos De Los Santos
- Speaker at SmartFurnace system and ZoloSCAN off gas monitoring integration in Vallourec Star
Hounlassiou Dieudonne
- Speaker at Digital reheating technolgy - New developments and benefits
Andrey Dmitriev
- Speaker at Blast furnace smelting of the titaniferous magnetite ores with the various content of titanium dioxide and quality of the agglomerated raw materials
Yusuke Dohi
- Speaker at New technique for coal size design based on unique thermoplasticity index
Marcel Dormann (CRM Group)
- Speaker at Enhancement of the EAF dust recycling in self-reducing briquettes by controlling their hydration behaviour
Wolfgang Eder (CEO, voestalpine AG)
- Speaker at Environment - climate - energy: Quo vadis industry?
Martin W. Egger
- Speaker at Successful revamping of sublancemanipulators for the LD-converters at voestalpine Stahl Gmbh – safe of process time and availability
Moritz Eickhoff
- Speaker at Macroscopic texture examination of huge polished micrograph sections for validation of remelting simulations
Roland Eisl
- Speaker at Design and optimization of iron ore pelletizing plants based on coupled numerical simulations
Aitor Elorriaga (PASEK MINERALES (BUSINESS DEVELOPMENT MANAGER))
- Speaker at Value in use of Pasek dunite improving the return sinter fines
Guillermo Fernandez
- Speaker at Results in EAF Process optimization with AMIGE SmartFurnace system
Rodolfo Paulo Santos Ferreira
- Speaker at 3D numerical model for gas and pulverized coal injection optimization
Bettina Fischer
- Speaker at Radar solutions for harsh environmental conditions
Sebastien Flament
- Speaker at Characterizations, modelling and lab trials assisting the development of a graphitic HSS work roll for rear finishing stands
Alexander Fleischanderl
- Speaker at Briquetting of ferrous and coal fines – Saving resources, creating value
- Speaker at Installation of a dry slag granulation pilot plant at blast furnace A of voestalpine
Andreas Flick (Primetals Technologies Austria GmbH)
- Speaker at Pioneering technologies to optimize the assets of steel producers
gabriel fricout
- Speaker at Data mining continuous sensor data for training plant wide defect models
Piero Frittella (Feralpi Siderurgica)
- Speaker at Activities for EAF Process Improvement to Acciaierie di Calvisano including KPI's approach for process monitoring and implementation of lime injection
- Speaker at Activities for through process modelling and monitoring of steelmaking process to estimate and improve process performances and steel qualities
Andreas Gantner (voestalpine Stahl GmbH)
- Speaker at Secondary Metallurgy No. 4 - The answer to the future quality demands at voestalpine Stahl GmbH
David Garcia (Pasek)
- Speaker at Torpedo ladle: Monolithic lining improvements
Hamid Ghorbani
- Speaker at Importance of thermocouple layout in blast furnace hearth refractory wear monitoring
- Speaker at Temperature fluctuation impact on structural behavior of blast furnace hearth refractory system
UDAY SHANKER GOEL
- Speaker at Understanding scale defect in Si bearing automotive grades manufactured through the CSP route at Tata Steel, Jamshedpur
Yakov Gordon
- Speaker at Influence of sinter and pellets proportion and quality on blast furnaces operation
Stephane Gouttebroze (Primetals Technologies France SAS)
- Speaker at Stainless steel endless continuous cold rolling with X-HI® stands technology
Markus Grüber
- Speaker at A feed-forward control for roller levelers using FE based process models and fast meta-models
Matthäus Haider
- Speaker at BOF process improvements by modern gas purging strategy and technology
Martina Hanel
- Speaker at Bypassing problems related to water cooling – Case study for applying ILTEC in an 100t EAF
Guenter Harp
- Speaker at Combined PtL and Use of by-product H2 in an integrated steel mill - Industrial symbiosis between chemical and steel industry
Christoph Häusler
- Speaker at Chatter management today at cold rolling mills. Theoretical background, integration into Genius CM condition monitoring, link to plant automation
Olivier Herbiet
- Speaker at Early roll defects detection in roughing mill
Kurt Herzog
- Speaker at The digitalization of steel production
Hajime Higuchi
- Speaker at Development of advanced 20Hi split housing ZR-mill (HZ-mill) for stainless and electrical steel
Hajime Higuchi (Primetals Technologies Japan Ltd.)
- Speaker at Newly developed universal crown control mill “HYPER UCM” for rolling of high-hardness and thinner steel
Karl Hoen
- Speaker at Concept, reference and performance of the CEM® technology
ANA-MARIA IOSIF
- Speaker at Recycling of blast furnace sludge by hydrometallurgy process
Yuki Iwai
- Speaker at Control technique of coke rate in shaft furnace by controlling coke reactivity
Robert Jäger
- Speaker at The KPI-driven and agile metals supply chain
Olivier JAOUEN
- Speaker at Improving the ingot quality by understanding the behavior of the mold flux during casting process using a 3D fluid/structure numerical simulation model
EUNJU JEONG
- Speaker at Characteristics of ladle flow field by gas bubbling method
Hasai Jiro
- Speaker at Mill stabilizing device for reduction of mill vibration in hot rolling
Andreas Jungbauer
- Speaker at ARVEDI ESP: The technological contribution for performance optimization
Andreas Kemminger
- Speaker at CFD simulation of multiphase melt flows in metallurgical reactors
- Speaker at CFD modeling of standard and shaft-type Electric Arc Furnaces
Jens Kempken
- Speaker at PQA-the success factor to reach next performance level in hot and cold rolling
Hans Jürgen Kerkhoff (Chairman Steel Institute VDEh and President German Steel Federation)
- Speaker at Political conditions for sustainable innovations in steel
Sun-Joong Kim
- Speaker at Influence of interfacial tension and viscosity on the formation of metal emulsion by rising gas bubble.
Jungil Kim
- Speaker at New designed long-life copper stave cooling system for blast furnace
Keun Young KIM
- Speaker at Analysis of copper stave breakage and restoration technology in Pohang no.4 Blast Furnace
Marcus Kirschen
- Speaker at BOF process improvements by modern gas purging strategy and technology
Bernd Kleimt
- Speaker at Real time sensing, dynamic modelling and advanced control of melt temperature in liquid steelmaking
Bernd Kleimt (VDEh-BFI)
- Speaker at Overview on DissTec project and introduction into topic "Measurement technologies in Secondary Metallurgy"
Werner Klein (Primetals Technologies Germany GmbH)
- Speaker at Valuable principles for effective planning & scheduling: A holistic approach
Christopher Klein (SMS group GmbH)
- Speaker at Performance Modules – a convenient and sophisticated way for hot rolling mills
Werner Klein (Primetals Technologies)
- Speaker at How technological advancements in proactive and predictive maintenance can increase the lifecycle of plant equipment
Ronald Knecht
- Speaker at Risk assessment for lubricants in use in steel plants. How fire resistant lubricants improve work safety and reduce fire hazard in steel plants
Mathias Knigge (Danieli Hi Tech GMBH KG)
- Speaker at Danieli Universal Endless (DUE®) The new evolution of Danieli thin slab casting and rolling plant
Thomas Kohl
- Speaker at Steel plant integrated charcoal production from wood and kraft lignin – Feasible market conditions
Saori Konno
- Speaker at Influence of kind and particle size of semi-soft coking coals on dilatation of blended coal
Alois Koppler
- Speaker at Inline measurement of electromagnetic parameters for characterization of material properties of steel strip with a focus on magnetic values
Tobias Kordel (VDEh-BFI)
- Speaker at SecMet Measurement technologies in ECSC and RFCS research projects - an overview
Alexey Kotchin (MAPEKO Feuer GmbH & Co. KG)
- Speaker at Information on carcinogenic substances in steel casting ladles
Daniel Kotzian
- Speaker at New strip tension control for better thickness performance at finishing mills
Wade Krejdovsky
- Speaker at Modernization of the Kroman wire rod mill to increase productivity, utilization and product quality
Matthias Krüger (SMS group GmbH)
- Speaker at Chatter management today at cold rolling mills. Theoretical background, integration into Genius CM condition monitoring, link to plant automation
Rolf Lamm
- Speaker at Introduction of a 3D-laserprofile-measurement-system that is immersed in to a hot steel casting ladle to measure and evaluate the entire conditions of the refractory lining including optimization of lining and ladle treatment, gap and crack detection, lining surface temperature and automated sand filling of the ladle-taphole.
Torsten Lamp (Minkon GmbH)
- Speaker at Measuring of liquid steel temperature in secondary metallurgy
Marvin Laugwitz
- Speaker at Flatness characterisation of hot plates for plate levelling
Klaus Lazzaro (SMS group GmbH)
- Speaker at Performance Modules – a convenient and sophisticated way for cold rolling mills
Joachim Lehner
- Speaker at First operating experiences with post-combustion lances at BOF shop LD3
Stefan Lemke
- Speaker at Vacuum converter – Producing special steels and ferroalloys
Wolfgang Linden (SMS group)
- Speaker at Optimizing OPEX for steel plants – Improve process control and energy efficiency
Bernd Linzer
- Speaker at Broadening the steel markets by direct application of high quality ESP strips
Viktor A. Lobachev (Yandex Data Factory)
- Speaker at Optimization of ferroalloy use in the BOF process using machine learning methods
Hans-Bodo Lüngen
- Speaker at Ironmaking in Western Europe
Yuriy Lytvynyuk
- Speaker at Dynamic modeling of the converter off gas composition in the cooling stack
Ichiro Maeno (Primetals Technologies Japan Ltd.)
- Speaker at Introduction of cold rolling complex for tin plate
Breno Maia
- Speaker at Aplication of the similarity method for cold modeling a 330 tons BOF converter in laboratory
- Speaker at BOF cold model - Metal slag bath mass movement determination by supersonic blow from multi nozzles
- Speaker at Continuous improvements in BOF at Arcelor Mittal João Monlevade by technology slagless lance
- Speaker at TIP ance nozzle wear study at VALLOUREC BRAZIL BOF
Jurgen Malbrancke
- Speaker at Introduction of tablets for work roll evaluation
Raffael Mancini
- Speaker at Industrial application of blast furnace liquid levels measurements using strain gauges
Francesca Marchiori
- Speaker at An agent based approach for steel industries for exploitation of opportunities and challenges provided by energy markets
Appio Marco
- Speaker at Automatic surface inspection in steel products ensures safe, cost efficient and timely defect detection in production
- Speaker at HiPROFILE innovative defect detection package to increase production quality
Jan Martens
- Speaker at Comprehensive competence in beneficiation technologies – from the raw materials to steel
Eliette Mathey
- Speaker at A fast model to evaluate threading refusal risk in hot rolling process
Ismael Matino
- Speaker at A simulation assessment of modifications of the water network of an electric arc furnace steelworks to allow wastewater reuse
- Speaker at Modelling of basic oxygen furnace slag treatment and processing in order to evaluate possibility of their reuse
- Speaker at Water process integration: Assessment of an ultrafiltration and reverse osmosis based treatment to regenerate coke-making area wastewater
Tim Mattern
- Speaker at Risk assessment for lubricants in use in steel plants. How fire resistant lubricants improve work safety and reduce fire hazard in steel plants
Anna Mayrhofer
- Speaker at Off the beaten path: New condition monitoring applications in steel making
Myriam Mensing
- Speaker at Product driven project methodology put into practice – how to implement a production management system for a plate mill line within 6 months
Andreas Metzen
- Speaker at SHARC - Shaft arc furnace - Minimized energy consumption, efficient scrap preheating and low conversion costs
Naoto Migakida
- Speaker at Development of looper shape meter in hot rolling
Stuart Millman (Materiasl Processing Institute (MPI))
- Speaker at On-line measurement of steel cleanness using rapid inclusion characterisation techniques
Robert Milner
- Speaker at Future of direct reduction in Europe – Medium and long-term perspectives
- Speaker at Commissioning and first operation results of world largest voestalpine Texas Midrex HBI Plant
Mauro Milocco
- Speaker at Steel vacuum degassing mechanical pumping system without process gas filter: latest technical developments for reduction in CAPEX and OPEX
- Speaker at Technical update on the SMS group automatic slag door condoor: lessons learned and results achieved in 7 years of experience
- Speaker at EAF double probe extraction system for off-gas analysis: the SMS group’s cornerstone for EAF process optimization solutions – The synergy program
Christian Mittag (IMS Messsysteme GmbH)
- Speaker at Topographic surface inspection system for slabs
GUY MONFORT
- Speaker at Cleanliness measurement and control using innovative LIBS method
Genevieve MOREAS
- Speaker at Industrial applications of reliable topography measurements
- Speaker at Optimisation of zinc coating using shape, position and vibrations high precision system
- Speaker at Review of CRM sensors usable for improved coated products
Maxime Moreau
- Speaker at Sinter-cooler process CFD modeling
Mohamed Abou Mossaed (EZZSTEEL)
- Speaker at Adjusting Hot Strip Mill Level2 Setup Using Tribological Approach to Eliminate Biting Refusal
Dirk Mudersbach
- Speaker at Factors of influence during and after the electric steel making process: Characterization and optimization of electric arc furnace slag
Adreas Munko (Outotec)
- Speaker at Outotec Solution for Pelletizing Plant Low Nox emission
Jochen Munz
- Speaker at Energy saving and process optimization in a conventional hot strip mill by application of the latest high-efficient descaling technology
Takafumi Nakaya
- Speaker at Development of new mash seam welder (Cross Seam Welder, CSW) for carbon steel pickling line
- Speaker at i Box pickling tanks for production improvement of advanced high strength steel upgraded from deep bath tank
Jose Manuel Naranjo-Espinosa
- Speaker at Assessing the effect of two different deoxidation practices on non-metallic inclusions and mechanical properties and their evolution with thermomechanical processing.
Afchine Nasserian
- Speaker at Industrial results obtained with the new generation of laser welder
- Speaker at Hot flat product surface inspection - Latest developments
Shungo Natsui
- Speaker at New discrete element simulation for trickle flow in blast furnace
Jun Negami
- Speaker at FE analysis of influence of edge wave length on roller leveling effect
Marcus J. Neuer
- Speaker at Economic impact maximization and throughput increase by decentral self-optimization of a pickling line
- Speaker at How-to optimize steel quality by applying Industry 4.0 techniques in real-world practical examples
- Speaker at The BFI-I4.0 solution modules for fully exploiting the digitization efforts of the European steel industry
Annika Nilsson
- Speaker at Measurements of contact, friction and heat transfer during rolling
Oleg Onorin
- Speaker at AU-E control of blast furnace refractory lining at NTMK-EVRAZ ensures intensive operation and prediction of the end of campaign of titania blast furnace.
- Speaker at Improving operational efficiency and cost competiveness of steel plants - A case study for electric furnace melt shop and hot rolling mill
- Speaker at Mathematical model and stabilization system for slag mode of blast furnace operation
SHUNSUKE OURA
- Speaker at Technology for improvement sinter productivity and sinter strength in the sintering process by gas fuel and oxygen injection technology ―Development of gas fuel and oxygen injection technology in iron ore sintering
Philipp Paier
- Speaker at Real-time 3D reconstruction and defect detection on hot-rolled steel products based on the laser-light-section method
Herbert Pasteiner
- Speaker at Innovative solutions for BOF dedusting systems – Achieving minimum emission levels
Geert Paulussen
- Speaker at Multi-target optimization of batch annealing bays
Christian Payerl (ABB)
- Speaker at Improved power quality and production benefits in EAF steel making by the use of modern MMC STATCOM
Hans Peintinger
- Speaker at Industry 4.0 in rolling mills enabled by proactive quality assurance
Florian Markus Penz
- Speaker at Impact of carbon, silicon and manganese contents on the dissolution and melting behaviour of scrap in a dynamic BOF model
Crescenzo Pepe (i.Process S.r.l.)
- Speaker at A training framework for i.Process/Steel-RHF APC system
- Speaker at i.Process/Steel-RHF: An adaptive algorithm aimed at online optimization of re-heating furnaces
Eduardo Perea (Sandvik)
- Speaker at Muffle tubes: choose the right material for longer service life
Andrea Pezza
- Speaker at Development of high quality grades production techniques using a VOD plant at voestalpine Giesserei Linz
Greta Piccolo
- Speaker at Hot forming of a low-carbon steel AISI 1005 for fashion accessories
Lukas Pichler
- Speaker at Know-how based root-cause analysis tool to ensure high product quality and process stability
Jean-Christophe Pierret (CRM asbl)
- Speaker at Fast analysis of slag chemistry during secondary metallurgy
Jean-Christophe Pierret
- Speaker at Adaptation of CRM EAF model for 100% DRI charging and implementation at Lazaro-Cardenas plant
Tom Plikas
- Speaker at Explosions due to the entrapment of water by molten iron, steel, or slag
Jan Polzer
- Speaker at An active actuator to eliminate chatter marks caused by self-exited vibrations in rolling mills without speed losses
Johann Prammer
- Speaker at Challenges to the steel industry in the transformation process towards low-carbon economy at the example of voestalpine
Andreas Priesner
- Speaker at Robotic guided tap hole maintenance on EAF, a major increase of worker safety
Hans Pronk
- Speaker at Automation of hot metal pouring in our steel plant
Stefan Puttinger
- Speaker at A combined data processing approach to improve blast furnace raceway blockage detection
Thibault QUATRAVAUX
- Speaker at Mathematical model dedicated to the diagnosis and optimization of blast furnace hot stove battery operation
Thiago RABELO NUNES CAMPOS
- Speaker at Improvement of overall blast furnace performance after the revamping of the top charging system at ArcelorMittal Atlantique et Lorraine BF-2
Fritz Raimund
- Speaker at The journey of one square millimeter wire surface
Henk Reimink (World Steel Association)
- Speaker at A new practical engineering approach to improving the service sustainablility of copper staves in blast furnaces
Tim Rekersdrees (Georgsmarienhütte GmbH)
- Speaker at Adaptive EAF online control based on innovative sensors and comprehensive models
Franz Reufer
- Speaker at Reactive PCI® technology - the next milestone in Küttner's comprehensive PCI know-how
Paul Riches
- Speaker at Rolling into the future by digitalization
Gerhard Richter
- Speaker at Newly developed combined abrasive cut-off and cold circular sawing machines for flexible applications in the steel and special metals industry
Gergö Rimaszéki
- Speaker at Optimal mixing and granulation process for fine utilization in sinterplants
Ian Robinson
- Speaker at Recent applications of the MULPIC® plate cooling technology
David Rodriguez
- Speaker at Modelling and simulation of ignition hoods for iron ore sintering
Roman Rössler
- Speaker at Analysis of multi component oxides by calibration-free laser-induced breakdown spectroscopy
Tobias Rothenfluh
- Speaker at Rotary kilns for direct reduction of iron ore: design, operational guidelines and troubleshooting based on complex mathematic modeling
Franz Rotter (President ASMET)
- Speaker at Opening Session
Franz Rotter (CEO, voestalpine High Performance Metals)
- Speaker at Digitalization in the steel industry
Tatiana ROZHKOVA
- Speaker at Detection of coal weathering
ESTEBAN RUISANCHEZ
- Speaker at Dunite patch for slagdoor and hearth lining EAF
- Speaker at Value in use of pasek dunite in the BOF process
Wilfried Runde
- Speaker at Manufacturing execution systems MES 4.0 from SMS group
Jeremy Rydberg
- Speaker at Improving reliability for steel mill furnace rolls
Afshin Sadri (Hatch Global Director of Non-Destructive Testing (NDT) Group)
- Speaker at Identifying the blast furnace salamander position by using non-destructive testing (NDT) techniques
P P Sahoo
- Speaker at Identification of peritectic grades of steel using high temperature phase transformation studies
Motoaki Sakumoto (JFE Steel Corporation Ltd.)
- Speaker at Development of new mash seam welder (Cross Seam Welder, CSW) for carbon steel pickling line
Mohammed SAMMAN
- Speaker at Yield improvement at direct reduction plant, module-E by modifying oxide screen-mesh
Erik Sandberg
- Speaker at Soft sensors for improved control of electric arc furnaces
Marta Santorroman
- Speaker at Gas odorization technology for toxic gas leaks detection in the steel industry
Caesar Sasse
- Speaker at Galvanizing of 3rd generation AHSS-grades with PrOBOX®-technology and flexible thermal treatment
- Speaker at Influences of the changed chemical composition of modern AHSS-grades on the pickling process
Eric Schaub
- Speaker at Hot blast stoves – Latest developments, assessment and lifetime extension
Martin Schlautmann
- Speaker at Dynamic on-line monitoring and end point control of dephosphorisation in the BOF converter
Henning Schliephake
- Speaker at Valorisation of slag and by products from EAF-metallurgy – NoWASTE a feasible way to go?
Reinhard Schmidhuber
- Speaker at X-Shape – high precision and cost-efficient flatness measurement and control
Matthias Schmidtchen
- Speaker at Opportunities of experimental and numerical simulation of steel rolling technologies at the Institute of Metal Forming of TU Bergakademie Freiberg
Martin Schmith (Primetals Technologies Ltd.)
- Speaker at TSL KPO BF 1 – Design, commissioning and start-up
Franz Xaver Schmoller
- Speaker at The most unique hot strip mill in the world
Gunther Schober
- Speaker at Custom fitted order dressing for metals industries
Christian Schubert
- Speaker at Process model development for reheating plants using simple numerical methods enhanced with CFD results
Christoph Sedivy
- Speaker at Practical user experience with an Industrie 4.0 electrode control system
Peter Seemann
- Speaker at Developing heat treat equipment for 3rd generation AHSS
Giuseppe Simioli
- Speaker at Operation of a DC EAF based meltshop connected to a weak electrical network: A feasibility study
Alessandra Spaghetti
- Speaker at Improved production efficiency with material selection for steel making
Wolfgang Spies
- Speaker at Severstal's revamp of their four stand flat cold tandem line in Cherepovets
Marten Sprecher
- Speaker at Energy balance of the integrated route
Tobias Stefan
- Speaker at OUTOTEC performance services for iron ore agglomeration plants
Gabriel Steindorf
- Speaker at Granulation of ultra-fine ores for utilization in iron ore sintering
Reinhold Steiner (Member of the Management Board-Division Steel, RHI AG)
- Speaker at Refractories 4.0
Thomas Steinparzer
- Speaker at Sinter plant and basic oxygen furnace waste heat utilization – New configuration with ORC modules for power generation
- Speaker at Waste heat recovery for EAF – Innovative concepts & industrial implementation
Andreas Steinwandter
- Speaker at Towards a cleaner future - Trends in gas cleaning technology for ironmaking
Klaus Stohl
- Speaker at A pioneering HSM side guide system eliminating strip defects at tremendously extended service life
Ida Strandkvist
- Speaker at Influence of basicity on chromium leaching of low alloy EAF slag
Daniel Strasser
- Speaker at Wear generation during cold strip rolling - a model based analysis
Pei-Ling Sun
- Speaker at Investigation of through-thickness texture of a 1.24% Si electrical steel
Hannu Suopajärvi
- Speaker at Evaluation of bio-coke strength and reactivity for blast furnace use
Kamesh Sandeep Telkicherla
- Speaker at Investigating the oxidation kinetics of magnetite pellet
Wataru Todo
- Speaker at Improvement of productivity for ultra-low carbon grade of Cr base ferrite stainless steel
Matteo Tomba
- Speaker at New sizing stands for bar and wire rod mills, to achieve tighter tollerances - the BSS stands
Matteo Tomba
- Speaker at LLR Rolls - New design concept for composite rolls and innovative ring locking system
Francesco Toschi
- Speaker at Forging-like rolling with high reduction of SBQ long products
- Speaker at The production of railway rails in modern and efficient plants - The new ARBZ rail mill
Breno Totti
- Speaker at BOF pressure effects over jet penetration at TKCSA
- Speaker at Slagless technology - New BOF performances at GERDAU OURO BRANCO
Volker Trappmann
- Speaker at State of the art gas cleaning and utilization for BOF gases: operational results and benefits
Michele Turchetto
- Speaker at Danieli cold mill complexes for automotive applications
Norbert Uebber
- Speaker at Advanced data-driven prediction models for BOF end-point detection
Soichiro Uehara (JFE Steel Corporation Ltd.)
- Speaker at Development of new mash seam welder (Cross Seam Welder, CSW) for carbon steel pickling line
Hemant Upadhyay
- Speaker at Mathematical model to simulate liquid metal & slag accumulation, drainage and heat transfer in blast furnace hearth
Wim VAN DER STRICHT
- Speaker at Carbon recycling at its best – Utilization of by-products from process-gas fermentation
Reinoud Van Laar
- Speaker at New hearth design for blast furnace no. 3 at DK
Bart Vervaet
- Speaker at Hot strip mill roll gap lubrication with low cost green oils and waste oils
Michele Vezzola (Polytec S.r.l.)
- Speaker at Machine intelligence for meltshop 4.0
Ville-Valtteri Visuri
- Speaker at In situ measurement of silicon content in molten ferrochrome
Lukas Voj
- Speaker at Indoor positioning of steel ladles using beacons
Lukas Voj
- Speaker at Proportional Oxygen Burner - A light, multipurpose burner for metallurgical applications
Bernhard Voraberger
- Speaker at Upgrade of stainless and special steel production by implementation of AOD process at ACRONI
Bernhard Weiss
- Speaker at Integrated steel plant optimization in flow sheeting process integration platform
Bernd Weiss (Primetals Technologies Austria GmbH)
- Speaker at Enhancing performance of integrated steel plant by combining FINEX® and blast furnace
Christian Westermayer
- Speaker at Tangshan new #2 cold rolling mill complex to produce advanced high strength steels for automotive market
Gerald Wimmer
- Speaker at Boosting the value of your steelmaking slag and dust
- Speaker at Fully automatic converter steelmaking
- Speaker at Optimization of converter design with CFD – Practical application for converter revamp
Bartek Wisniewski (MINKON GmbH)
- Speaker at Online Measurement of dissolved gasses in secondary metallurgy
Shengli Wu
- Speaker at Research on injection of COG in middle-upper part of COREX melter gasifier
Wanren Xu
- Speaker at Operation and maintenance technology for prolong campaign life of large blast furnace hearth
Hongbin Yin
- Speaker at Nitrogen behavior during steelmaking of high Al TRIP steels
Winnie Ying
- Speaker at Implementation and results of non-destructive testing method for cooling staves thicknesses at NLMK
Shih-Chuan Yu
- Speaker at Dynamic cooling control system of high strength steel wire rod
Chenn Zhou
- Speaker at Modeling of steel bar melting process in an experimental induction furnace
- Speaker at Using numerical simulation and virtual reality visualization for steelmaking applications
Christian Zybill
- Speaker at Advanced HSS grades – Key material for rolling of steel with high efficiency