42nd International Deep Drawing Research Group Conference - IDDRG 2023

19–22 Jun 2023

House of Culture, Luleå, Sweden

Europe/Vienna timezone

Contact: Michelle Grabmaier (ASMET)

Speaker List

Shahroz Ahmed (Tampere University)
- Speaker at The effect of scrap originating trace elements on the properties of low-alloyed steels’
Mohaned Alaluss (Fraunhofer Institute for Machine Tools and Forming Technology IWU)
- Speaker at Process Monitoring using Digital Twin-Based Sensors integrated in Tool Clamping Surface
Lorenz Albracht (Institute of Forming Technology and Machines)
- Speaker at Oxygen-free resistance heating with nitrogen and silane as an energy-efficient heating process for hot stamping
Yuguo An (Tata Steel Europe)
- Speaker at Effect of strain mode and blank orientation on waviness and its potential improvement in paint appearance of automotive outer panels
Per-Emil Back (Gestamp R&D Sweden)
- Speaker at History of Hot Stamping process and hot stamping simulations
Junho Bang (Korea Institute of Industrial Technology)
- Speaker at Wear characteristics of the tool in the cold stamping process of ultra high strength steel sheet by establishing a novel wear test method based on the progressive die
Alexander Barlo (Blekinge Institute of Technology)
- Speaker at Determination of edge fracture limit strain for AHSS in the ISO-16630 hole expansion test
- Speaker at Proposal of a new tool for pre-straining operations of sheet metals
Maxim Beck (Institute for Metal Forming Technology, University of Stuttgart)
- Speaker at Development of a new cyclic shear test setup for characterizing thin metallic foils
Thorsten Beier (thyssenkrupp Steel Europe AG)
- Speaker at Investigation of tool damage in shear cutting of ultra high strength sheet steels
- Speaker at Local and global forming potential of present dual-phase steel developments
Jeet Bhuva (Deakin University)
- Speaker at Formed developables - a new class of sheet metal parts
Simon Biffar (Institute for Production Engineering and Forming Machines)
- Speaker at Performance of stringer sheet parts under static and dynamic load
Alexander Breunig (Technical University Darmstadt)
- Speaker at Pressure distributions in deep drawing with a passive cardanic blank holder
Bart Carleer (AutoForm Engineering Switzerland )
- Speaker at Optimal milling data preparation for draw dies
Elise Champolivier (ArcelorMittal Global R&D Montataire)
- Speaker at EXPERIMENTAL CHARACTERIZATION OF FORMING BEHAVIOR OF 3rd GEN AHSS
Xuan Cheng (Shanghai JIao Tong University)
- Speaker at Research on toolpath optimization of robot-assisted flexible flanging
Toni Chezan (Tata Steel Nederland)
- Speaker at Material variability effects on automotive part production process
Hyunsung Choi (Korea Institute of Material Science)
- Speaker at Artificial intelligence-based springback compensation of EV motor component
Lucas Alexandre de Carvalho (University of Miskolc)
- Speaker at Experimental investigation of the effect of lubricant change on automotive component
Jemal Ebrahim Dessie (University of Miskolc)
- Speaker at Experimental investigation of the effect of W-temper forming process parameters on springback
Josef Domitner (Graz University of Technology; Institute of Materials Science, Joining and Forming)
- Speaker at Influence of elevated surface temperature on the formability in cold forming of aluminum alloy sheets
ehsan farahmand (Institute of Forming Technology and Machines)
- Speaker at Partial resistance tempering of hot-stamped components for subsequent bending
Eduard Garcia Llamas (Fundació Eurecat)
- Speaker at On-line quality control and tool wear evaluation in trimming process by data analytics technics
Michelle Grabmaier
- Speaker at SSAB’s transformation to Fossil Free Steel with the HYBRIT Technology
Vincent Grolleau (ETH Zurich)
- Speaker at Novel and revisited experiments for plasticity and fracture testing of sheet metals
Aishwary Gupta (Seoul National University)
- Speaker at Evaluation of anisotropic fracture in AA1050-O sheet using uncoupled ductile fracture models with Hill48 plasticity
Jaakko Hannula (University Of Oulu)
- Speaker at Evaluation of hole expansion ratio of ultra-high strength martensitic steels produced with various processing routes
Pascal Heinzelmann (Institut for Metal Forming Technology)
- Speaker at Characterization of the mechanical properties of selectively embossed sheet metal materials under multi-axial loads
JOSE LUIS HERNANDEZ RIVERA (UNIVERSIDAD AUTONOMA DE SAN LUIS POTOSI)
- Speaker at Effect of the intercritical annealing in the formability and microstructure of a medium Mn steel sheet
Johan Hol (TriboForm Engineernig B.V.)
- Speaker at Friction and lubrication modelling in sheet metal forming: Influence of local tool roughness on product quality and process robustness
Katja Holzer (Technical University of Munich, Chair of Metal Forming and Casting)
- Speaker at Dimensional precision and wear of a new approach for prototype tooling in deep drawing
Eiji Iizuka (JFE Steel Corporation)
- Speaker at Accuracy of stretch flange formability prediction by considering strain gradient for actual car body parts
Christian Ilg (DYNAmore GmbH)
- Speaker at Displacement based simulation and material calibration based on digital image correlation part II - application
Larsson Jan
- Speaker at Press hardening - History, and future
Peter Jurči (Slovak University of Technology)
- Speaker at Optimization of wear-, fracture- and corrosion performance of Vanadis 6 steel through cryogenic treatment and tempering
Ganesh Kakandikar (Dr Vishwanath Karad MIT World Peace University Pune)
- Speaker at The Investigations on Formability of Tantalum RO5200 Thin Foils: Bio-Material
Minki Kim (Korea Institute of Industrial Technology)
- Speaker at Deformation Prediction of Titanium Alloy in Incremental Sheet Forming with Anisotropic and Asymmetric Yield Function
Yasuhiro Kishigami (JFE Steel Corporation)
- Speaker at Measurement of skid line formation and formation mechanism of automotive outer panel
Silke Klitschke (Fraunhofer Institut für Werkstoffmechanik IWM)
- Speaker at A uniform method for the characterization of shear fracture strain for high-strength steel sheets under quasi-static and crash loading
Jonas Knippenberg (Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG)
- Speaker at Novel tool steels for application in hot stamping
Yannis P. Korkolis (The Ohio State University)
- Speaker at Experiments and simulations of the drawing envelope of pure aluminum
Omkar Kulkarni (Dr Vishwanath Karad MIT World Peace University, Pune)
- Speaker at The Investigations on Formability of Tantalum RO5200 Thin Foils: Bio-Material
Sunil Kumar (Sardar Vallabhbhai National Institute of Technology Surat)
- Speaker at Strength enhancement and uniform grain refinement through cross route-constrained groove pressing
Vinay Kumar (Indian Institute of Technology, Delhi, India)
- Speaker at Numerical and experimental investigation of hole flangeability of AA6061 alloy
Núria Latorre Lázaro (Fundació Eurecat)
- Speaker at A mechanical interlocking joint between sheet metal and carbon fibre reinforced polymers through punching
Xavier LEMOINE (ArcelorMittal R&D Maizières)
- Speaker at Impact of elastic modulus evolution on springback prediction
Zinan Li (Aalto University)
- Speaker at Edge fracture of the first and third-generation high-strength steels: DP1000 and QP1000
Christian Liebold (DYNAmore GmbH)
- Speaker at Displacement based simulation and material calibration based on digital image correlation part I - theory
Mathias Liewald (Institute for Metal Forming Technology, University of Stuttgart)
- Speaker at Perspectives on AI applications in sheet metal forming
Zsolt Lukács (Institute of Materials Science & Technology, Faculty of Mechanical Engineering)
- Speaker at Experimental investigation of the effect of lubricant change on automotive component
Michael Machhammer (AP&T Sweden AB)
- Speaker at Multi-functional SMC-aluminum battery tray to drive lightweight design
Peeyush Mahajan (IIT Bombay)
- Speaker at Micro incremental forming of thin SS304 foils and its microstructural study
Lorenz Maier (Technische Universität München)
- Speaker at Innovative experimental setup for the investigation of material models with regard to strain hardening behavior
Lukas Martinitz (Technical University of Munich)
- Speaker at An artificial neural network approach on crystal plasticity for material modeling in macroscopic simulations
ABDELBASET MIDAWI (University of Waterloo)
- Speaker at Hot-forming of a 980 MPa third generation advanced high strength steel
Mohamed Mohamed (Impression Technologies Ltd)
- Speaker at Process optimization and robustness analysis for HFQ process using AutoForm-Sigma
Martina Mueller (1Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University)
- Speaker at Numerical analysis of the load paths and the resulting damage evolution during the deep drawing of dual-phase steel
K Narasimhan (IIT Bombay)
- Speaker at Evaluation of hardening models coupled with shear modified Lemaitre damage model for fracture prediction in incremental sheet forming
- Speaker at Yield Locus Development and Microstructure Characterization of AA2219 under Planar Biaxial Loading
Chao Niu (Baosteel)
- Speaker at Study of the Influence of part features of AHSS A-pillar on springback and its robustness
Marta Oliveira (CEMMPRE, Department of Mechanical Engineering, University of Coimbra)
- Speaker at Influence of process and material parameters on the twist springback prediction of a panel
Peter Ottosson (RISE AB)
- Speaker at Substitutive models of press deflections for efficient numerical die cambering
Tetsuo Oya (Keio University)
- Speaker at Formability evaluation based on a constitutive model with stress rate direction dependency considering bifurcation modes
Sergi Parareda (Eurecat)
- Speaker at Fracture toughness to assess the effect of trimming on the fatigue behaviour of high-strength steels for chassis parts
Jaemyoung Park (HYUNDAI STEEL)
- Speaker at Development of Rapid Die Cooling Technology to Reduce Cycle Time in Hot Stamping Process
Anna Payà Campo (EURECAT - Manresa)
- Speaker at Effect of pre-strain on the edge formability of high strength steels for chassis applications
Ivan Peinado-Asensi (CEU Cardenal Herrera University)
- Speaker at Industrial Internet of Things and Big Data Techniques for the Smart Press Shop 4.0 Development in Automotive Industry
Vicente Pérez Aroca (CENIM-CSIC)
- Speaker at CRASHWORTHINESS EVALUATION OF PRESS HARDENED STEELS WITH DIFFERENT LATH-LIKE MICROSTRUCTURES
Quoc Tuan Pham (Department of Mechanical Engineering, Blekinge Institute of Technology, Karlskrona, Sweden)
- Speaker at An evaluation method for experimental necking detection of automotive sheet metals
Johan Pilthammar (Volvo Cars)
- Speaker at An overview of Methods for Simulating Sheet Metal Forming with Elastic Dies
- Speaker at Three Industrial Cases of Sheet Metal Forming Simulations with Elastic Dies
- Speaker at Towards Virtual Tryout and Digital Twins at Volvo Cars
Pekka Plosila (University of Oulu)
- Speaker at Strain evolution during hole expansion testing of 800 MPa tensile strength hot-rolled steels
YUTONG QI (Shanghai Jiao Tong University)
- Speaker at An efficient pre-hardened cryogenic forming process for AA7075 aluminum alloy sheets
Alborz Reihani (Mercedes-Benz)
- Speaker at Analysis of process limits for partial hot stamping with controlled pre-cooling by radiation exchange
Nikolaos Rigas (Institute for Manufacturing Technology)
- Speaker at Development of a novel in-situ measurement method for thermo-mechanically coupled material characterization of high-strength aluminum alloys
Jan Henning Risse (Friedrich-Alexander Universität Erlangen-Nürnberg, Institute of Manufacturing Technology)
- Speaker at Carburization behavior at elevated temperatures and mechanical properties of a hot stamped complex phase steel
Sylvain royne (IRDL Lorient)
- Speaker at Forming of a cylindrical cup in 7075-T6 under warm temperature conditions
Pedram Samadian (University of Waterloo)
- Speaker at Experimental Characterization and Prediction of Forming Limit Diagrams of PHS1800 During Hot Stamping
Olle Sandin (Luleå university of technology)
- Speaker at Numerical modelling of shear cutting using particle methods
Sota Sato (Tokyo University of Agriculture and Technology)
- Speaker at Cruciform tension-shear test for sheet metal and application to material modeling of mild steel sheet
Lorenzo Scandola (Technical University of Munich, Chair of Metal Forming and Casting)
- Speaker at Impact of the process velocities on the quality of free-form bent parts
Adrian Schenek (Institute for Metal Forming Technology)
- Speaker at Application of a neural network for predicting the cutting surface quality of punching processes based on tooling parameters
Archit Shrivastava (IIT Delhi)
- Speaker at Simulation of deep drawing of dual phase steel sheets incorporating tribological behaviour predicted by advanced friction modelling
Mats Sigvant (Volvo Cars)
- Speaker at Sheet metal forming simulations at Volvo Cars: the past, the present and the future
Mikhail Solovev (Technische Universität Chemnitz)
- Speaker at Development of geometry variants and forming technology for metal diaphragms to increase the efficiency of diaphragm compressors
Markus Stennei (TU Dortmund)
- Speaker at Prediction strategy for forming and joining process of oval tubes
Eugen Stockburger (Institute of Forming Technology and Machines, Garbsen, Germany)
- Speaker at Optimised parametrisation of the MMC failure model using acoustic emission and FE analysis
Yuki Taguchi (KOBE STEEL.LTD)
- Speaker at Measurement and prediction methods for forming limit strain of stretch bending deformation in sheet metal forming
Mihaela Teaca (ARCELORMITTAL)
- Speaker at Bendability assessment of advanced high strength steels thanks to artificial neural networks
Tobias Teeuwen (IBF RWTH Aachen University)
- Speaker at Investigation on evolution of microstructure and mechanical properties of heat-treatable aluminum alloy during hot sheet metal forming process
Jörn Wehmeyer (Institute of Forming Technology and Machines)
- Speaker at Process chain for forming and consolidating fiber-reinforced thermoplastics and metallic sheets in a two-stage isothermal tool
Matthias Weiss (Deakin University)
- Speaker at Part quality improvement in flexible roll forming of a combined variable width and depth component
Alexander Wessel (Fraunhofer Institute for Mechanics of Materials IWM)
- Speaker at Prediction of texture-induced plastic anisotropy in AA6014-T4 aluminium sheets utilising two different crystal plasticity constitutive models
H. Y. YANG
- Speaker at An efficient pre-hardened cryogenic forming process for AA7075 aluminum alloy sheets
Bingying Zhou (Beihang University)
- Speaker at Research on the evolving yielding behavior and micro-mechanism in biaxial deformation of DP1180 sheet based on crystal plasticity finite element model
Hong Zhu (ArcelorMittal Global R & D - USA)
- Speaker at Study of Microstructural Evolution of Press Hardening Steels using Dilatometer and In-situ Studies for a Simulated Hot Stamping Condition
Hong-Liang Zhu (Institute of Metals, Chinese Academy of Sciences)
- Speaker at Effect of blank size on impact hydroforming of 2195 Al-Li alloy half-tube part with curvature
Philipp Zimmermann (inigence gmbh)
- Speaker at Optimization of the physical scaling approach through adaption of the inverted membrane stresses
双利李 (上海交通大学)
- Speaker at Study on the ultrasonic-assisted spinning-extrusion forming of thin-walled cylindrical parts with vertical and horizontal ribs